Multiple track recording via Firewire

I want to record multiple tracks, (preferably as individual WAV files,) from a firewire equipped mixing desk which provides direct outputs from each channel via firewire.
Can Soundtrack, (not Pro,) allow me to do this? I'd like to lay down up to 24 tracks at a time if possible.
Normaly I edit on ProTools LE with a dual 2GHz G5, but for convenience I'd prefer to use a 12" iBook as I'd be on location. Am I correct in thinking that it would be fine for basic track laying?
LEE

Thanks Dave.
Tell me, do you know of file size importing limitations with Logic Express. The Digidesign people are telling me there is a 2Gb file limitation for importation into ProTools LE.
I was planning on backing up recording multiple WAV files on a Mackie hard disc multi-track recorder that creates separate mono WAV files for each track.
Snag is that I was hoping to hit record and leave it running for several hours - which could create WAV files that are quite sizable.
Either that or find a way to cut a WAV file into smaller pieces - but I've got a feeling that its not possible to do this.
LEE

Similar Messages

What is the best way to record a project to an external recorded via firewire. Also, who makes a recorder that works with a mac?

What is the best way to record a project from the timeline to an external recorder via firewire? Also, who makes a recorder that works with a mac and recordes in realtime? This is possible right?

While theoretically possible, sometimes the camera people disable recording back to tape from the computer due to DRM (digital rights managment) issues. They will allow tape to tape transfers however.
Test your process first is all I can advise.
x

Punch in & multiple tracks recording

I'm working with Logic Express for a few weeks now, and I need to know 2 things:
How can I make a punch in/out with Logic Express?
I worked with Adobe Audition, and I just needed to select the part of the track where the repair should be done, and play.
Now I just can't find out how it works with logic!
how can I record multiple tracks at the same time with my Tascam FW1082?, now I can only select 2 tracks for multiple record.....
Thanks!
Martin

As for "Punching in and out" i just loop the section that i wish to record over and BAM im done. You can use the magnifying glass to loop a certain area in detail or even use the loop markers on your Transport bar.
For multiple track recording press record and then shift+click the other tracks you want to record on.
Peace and Chicken Grease
Frisco

X-Fi Platinum Multiple track record

??I have been doing a little reading on the forum for multiple track recording but I could not find anything specific enough for what i need. I have a Fostex digital recorder and i would like to either send out the multiple tracks of say a drum recording to multiple tracks on Majix Music Studio ten. I have been playing around with it but i cant find exactly what I need. Ideally I would like to use the ADAT format from a digital optical cable to bring in the individual wave files directly to the computer. But if?can find a better way or if sombody knows of a fairly inexpensi've digital mixer with at least 6 channels (any input preferably XLR). Also my recorder has SPDIF but only in a two track format. It also has MIDI outputs and inputs but so far I dont think I can use that?for controling my software and sending in multiple tracks. I know my program can do ASIO and WDM. But I dont know what inputs are assigned to what numbers. If any body can awnser any one of these questions please post. ASIO sounds great but how do I identify the track numbers to what input and can i input all the tracks from a digital input?Comp info:?Windows

W/ ASIO, you can record from as many sources as you get listed/selected separetley in ASIO input port list (meaning those w/ names like Line-In, S/PDIF-In, Mic-In, Aux-In since, there are many of those ports meant for internal routings (W-U-H)). I don't know if you can use S/PDIF and analog inputs simultaenously. Here are some detailed information for Creative ASIO drivers (for Audigy cards but ...) - http://forums.creative.com/creativelabs/board/message?board.id=profaudio&message.id=726
I think that Fostex is not very usable for you if you don't build a ADAT system over it. If you have the ADAT option in Fostex already available there and you can get 8 separate channels out from Fostex through it then you could get a soundcard which supports ADAT I/O (something like E-MU 22m ($99 atm.)) and record through Fostex into PC (though, A/D conversion quality Fostex does is propably not very good). Maybe you need more mic-preamps to record drums then too.
jutapaMessage Edited by jutapa on 0-5-200708:32 PM

Logic Pro 7 - Audio Track record with Firewire In

System: Mac Book Pro. Logic 7.2.3 M-Audio Firewire 410. Aggregate device created = Firewire Multichannel (as input) & Built-In Output. (Built-in microphone turned off) Using condensor mike connected to F/W interface
SYMPTOM: No Audio being recorded to Audio Track. MIDI interfaces OK.
Any idea how to set Audio track to capture Firewire audio IN? (The set-up works properly with Garage Band)

Have you checked the Audio Input in the Channel Strip? What is it set to? Have you armed the Record button? ... say a bit more about your set up

Follow up info to "Multiple track recording probl

I used Cakewalk's Sonar 3 Producer's Ed, Cubasis and Diamond Xtreme's Audacity. 3 different recording studio desktop software packages and they all do the same wrong things as described in my initial post.

Thanks Dave.
Tell me, do you know of file size importing limitations with Logic Express. The Digidesign people are telling me there is a 2Gb file limitation for importation into ProTools LE.
I was planning on backing up recording multiple WAV files on a Mackie hard disc multi-track recorder that creates separate mono WAV files for each track.
Snag is that I was hoping to hit record and leave it running for several hours - which could create WAV files that are quite sizable.
Either that or find a way to cut a WAV file into smaller pieces - but I've got a feeling that its not possible to do this.
LEE

Multiple Track recording without a firewire interface?

I have a unibody MacBook without firewire- I want to record two tracks in GarageBand simultaneously. I have a USB iMic, and would like to have one mic on the iMic and another on my built-in mic port to record both simultaneously for my podcast. Is it possible to do this? I have considered plugging two mics into a headphone splitter, however I would like the ability to manipulate each track individually, IE place effects on one and not the other. I have looked into the Alesis Multi-Mix 8 USB mixer and, however nice, is too expensive for my podcast budget- even used (~$200). Is there a plugin? Is there alternative software? Thanks. Scott

I have a USB iMic, and would like to have one mic on the iMic and another on my built-in mic port to record both simultaneously
create an aggregate device for them:
http://www.bulletsandbones.com/GB/Tutorials.html#allaboutaggregatedevices
however, note:
http://www.bulletsandbones.com/GB/GBFAQ.html#micline
(Let the page FULLY load. The link to your answer is at the top of your screen)

Multiple track recording nightmare

Hi there!
Just got a Macbook Pro (DuoCore 2.0 gHz, 1 gb RAM, 80 gB 5400 rpm HD) and tried recording 6 simultaneous tracks with a Firepod on a Firewire 400 connection. BUT, Cubase LE and GarageBand 3 have been doing the dorks since they give me this kind of error message "The program couldn't continue recording because the hard drive is too slow or the buffer size isn't sufficient. Try augmenting the buffer size or check the HD blablabla"
So, I checked the HD in the Disk Utility and it said that it was ok...Then, I augmented the buffer size to the maximum and downgraded the sample rate to 44.1 kHz at 24 bits and the message kept on appearing!
Please help me, because I am seriously planning on returning the Macbook to Apple if it can't deliver the performance we require.
Yves
Macbook Pro 2.0 gHz, 1 gb RAM Mac OS X (10.4.7)

Cubase LE and Garageband 3 were the only applications running at the moment and nothing but the Firepod was plugged in the Firewire...
The site founder of BigBlueLounge actually told me that my MBP should be more than able to handle the work...
(http://www.bigbluelounge.com/forums/viewtopic.php?p=261655#261655)
AppleCare time!
And the Firepod is doing some strange synching LED things right now (what's next?). Maybe I'm close to a solution...

Creating/Updating multiple customer records via DEBMAS06

Hi all,
I have used DEBMAS06 for inbound processing of customer master records in SAP. My problem is legacy is providing multiple rows of data (multiple customer) in one single file.
Segment type E1KNA1M shows minimum & maximum number of segments in sequence as 1. Does that mean we cannot create multiple customers through one single call of the IDOC from XI?
We are using XI as middleware.
Please respond. I will reward aptly.
Thanks,
Bhaskar Pal.

Damian,
you can update mutiple records in one statement just make the occurance to unbounded in your data type declartion for JDBC reciver .

PLAYING TIMELINE TO STAND ALONE DVD RECORDER VIA FIREWIRE

Hi,
i have read that you can play out a timeline to a DVD Recroder through the Firewire input of the DVD Recorder.
Pretty handy for quick client DVD which dont need fancy menus.
Anyone know of a good DVD Recorder to go for?
Thanks,
Jamie

Not all Firewire equipped DVD recorders will accept a FW signal from your computer, but fortunately, some will. No one that I'm aware of can say with any certainty which models will and which won't. Its kind of a hit-or-miss type of thing.
The one I have does work ... a Pioneer DVR-533H-S. FCP even recognizes it as a DV device so I can capture from it as well as do a Print-to-Video. A friend purchased another Pioneer model that didn't work. Go figure.
-DH

Trying to Record Via Firewire without a tape

I am trying to record directly into my computer. When I click now in the capture window it tells me no time code run it in vtr. I am not putting a tape into the camera. is there a way i can use this like this? add a time code somehow?
thanks....

Going to tape first is a good idea anyway, especially if you want to delete the capture from the computer and reload it later to make changes. Can't do that without tape...
But if it's not something you want to keep around it might not matter to you.

STP won't recognize audio via firewire from camera

Dear all,
I am trying to record narration using a microphone attached to my Canon XL1S and import the audio live into Sound Track Pro via firewire. This method works fine for Quicktime. Quicktime recognizes the XL1S and records the narration as I am speaking, but STP does not seem to recognize the firewire input and I get no meter levels or any indication that my audio is registering. Any suggestions? I have tried all the preferences and settings I can find. Do I need another interface for STP? Seems strange that I would if Quicktime recognizes it.
Thanks much.
Barb.

It cannot be done. STP (and other DAWs) doesn't natively support Firewire devices in that manner.
Instead, try the Quicktime or FCP approach, or even record it to tape, then import it. The better way would be to get a dedicated soundcard and mixer for that. Believe me, you'll appreciate that!
tim

I record multiple tracks (3-5) from real instruments and vocals. I want to send these files to a collaborator to add more tracks to, but Garageband wants to mix these down (which I don't want). How can I send the multiple tracks files to my friend?

I record multiple tracks of real instruments and vocals wth Garage Band. I want to share the file with a collaborator so he can add another instrument or two. I have not found a way to do this without the process mixing down the tracks. I don't want them mixed down like when I send them to Itunes. Also I can't seem to just attach a file directly to an email for sending purposes. I thought I saw a method to do this with software instruments, but how do you do it with real instruments? I've tried every process on the "export" list to try to accomplish this, without success. Thanks for any breakthrough advice on this!

As isteveus said - for large projects uploading to a server would be best.
Also I can't seem to just attach a file directly to an email for sending purposes.
But for completeness's sake , you cou can mail a project, if you ctrl-click the project and use "Compress xxx.band". This will compress the project and create a zip file, that you can mail (if it is not too large). But ask your friend for the maximal file size allowed as a mail attachment.
But whichever method you use to share your project, be sure you include all loops and instruments, if your friend does not have the same JamPacks installed. You can bundle the loops into the project by saving it as an archive. "File > Save as" and check the "Archive Project" option.
If this option should be disabled, you can force it to become active by editing your project slightly. It is only available, if the project needs saving.
Regards
Léonie

Trying to record multiple tracks (24) in Garageband with 3 presonus firestudio devices daisy-chained together.

Please help !! I can record multiple tracks (8) on a single presonus firestudio, but now I'm trying to expand the number of tracks to 24 by daisy-chaining three firestudio devices.
The three units will sync up properly, and Garageband detects all of the input channels, but the recording doesn't pick up the input signals for the 2nd or 3rd device. It only picks up the signals from the first device. I read the manual and daisy-chained the devices by serial number (lowest to highest).
Any help would be greatly appreciated.
Thanks

avotrans wrote:
I'm trying to expand the number of tracks to 24 by daisy-chaining three firestudio devices.
you'll need to create an aggregate device:
http://www.bulletsandbones.com/GB/GBFAQ.html#multipleaudiointerfaces
This FAQ entry offers a Minute GarageBand video tutorial
(Let the page FULLY load. The link to your answer is at the top of your screen)

Record TV from Cable Box via Firewire

So I have a cable box capable of outputting Tv via Firewire. I have the cable, and using iRecord I can record TV, but it is very cumbersome. I was wondering if anyone could give me a working link to Ical scripts that will launch a AVCVideoCap recording. the link is http://machdtvtimer.home.comcast.net/ but it does not work.

See this link:
http://macteens.com/index.php/features/fullstory/howto_make_your_own_home_theatre_machtmac/
I haven't tried it, but have always wanted to.

Multiple track recording via Firewire

Similar Messages

Maybe you are looking for