Multiple triggers for single popup

Maybe it is dumb question to ask... sorry if that is so but...
Is it possible to have several triggers in different parts of page for the same action? E.g. I want to open one lightbox by means of five different buttons. How to do that?
Thanks.

Hello,
You can Simply do that by creating copy of single trigger light-box slideshow widget, Please find below the step by step suggestions.
1. Create a light-box slideshow and Design it as per your requirement (Create it with a single trigger)
2. Go to the options and uncheck "Show light-box parts while editing"
3. By doing this you will be able to see only the trigger on the page.
4. Now copy that (Slideshow) and paste it on the desired locations.
5. It would look like its launching same light-box for each trigger as they all are the same copy.
Regards
Vivek

Similar Messages

How to uploade multiple flatfiles for single transaction using BDC?

How to uploade multiple flatfiles for single transaction using BDC?

Hi,
You need to upload all data files into an internal table first either using OPEN DATASET (application server files) or GUI_UPLOAD (PC files).
Then loop at the internal table and call BDC transaction to process the data.
Regards,
Ferry Lianto

Set multiple passwords for single PDF

Hi All,
Do it is possible to set multiple passwords for single PDF i.e) a single PDF can be accessed using predefined passwords. It would be great if any one could can help me .
Thanks
Augustine

Thank you.
Do you mean different IDs can be used for a single PDF and can make the PDF protected.
Regards
Augustine

Multiple Alerts for Single error in interface is a design not issue with XI

Hi,
This is constraint of alert mechanism in XI.
You get multiple alerts for single error,the reason is that since XI will try multiple times to process a failed message so each time it fails in its tries it will send an e-mail.to stop this the "Suppress multiple alert" box is checked but what it does is that it stops all the alerts of that specific rule until the first one is confirmed.Personally i myself (and other experts too) suggest to leave the box unchecked coz its better to get tons of mails for a specific error rather than not getting any e-mail and thereby wasting time in tracking/solving the issue resulting in revenue loss to client.
As per above comments is it possible to write an ABAP code so that we can stop multiple alerts to be sending to inbox. I am sure if we can delete message from some table then we can stop sending multiple messages to alert inbox and to the subsequent mail id also. I am not sure how alert being generated. I know where they get logged in this table sxmsalertlogger. If someone know how it works in background please let me know the table names.
Regards
Ria

Hi Gaurav,
You can personalize the way in which you receive alerts.
Simply choose Personalization to make individual settings for your alert inbox. You can determine a substitute who will then receive the alerts. In addition, you can choose whether alerts are sent to you time-independently or time-dependently. The default setting is that alerts are sent time-independently to your alert inbox and via e-mail when they occur. You can additionally select the communication methods FAX and SMS for time-independent alert notification.
If you want to receive alerts only on certain days for a certain time, simply select the option for time-dependent sending of alerts and choose Create to create a new table entry. You can then choose the corresponding factory calendar, the time interval, and communication channel. Alerts that arise during this time frame will be sent in any case to your alert inbox. If you have also selected other communication channels, the alerts are additionally sent to you using these other channels.
This above text is from SAP help, do you think by changing anything in personnalisation i can stop multiple alerts. I have some issue with Personalisation link so was wondering would be worth to get tht personalisation issue resolved.
Regards
Ria

Partner Function Queries Multiple Partners for Single Partner function SO

Hi Experts
Is it possible to enter multiple partners for Single partner Function in SALES ORDER
For Ex : We have created Z1 as a Partner function for Sales Executives : and Sales Executive 1 , Sales Executive 2 Sales xecutive 3 etc as sales Partners for Z1 partner Function .
Now Is it possibe to enter for Z1 -
sales Exeutive 1
Z1----
Sales executive 2
Z1----
Sales Executive 3............
I would be greatful if you repond the same at the earliest
Thanks
Rashmi K

Hi Rashmi,
The requested function is possible.
In the customizing of partner function, you could set the field Unique as blank. Then you could enter multiple partners for same partner function.
IMG->SD->Basic functions->Parnter determination->Partner Functions
Hope it helps.
Thanks and best regards,
Smile

Return multiple values for the popup LOV

Hi folks,
I have one challange. I have a search engine and there is an popup lov and its having three Display and 3 Retun value such as
select
p.A || ', ' || pi.B|| ', ' || km.C|| ' ' d, p.A || ', ' || pi.B|| ', ' || km.C|| ' ' r
from tableA km,tableB p,tableC pi
where km.col1=p.id and km.col1=pi.id and km.C is not null
when i click on the pop lov it will display 3 values shuch as SAP+DBA+HR and in popup lov iteam its will return 3 values
such as SAP+DBA+HR this return values are from 3 cloumn names from same table ie. A column, B column, C column
and when i click on submit button this return values from 3 columns values should assign to the 3 column such as
A=SAP, B=DBA and C=HR and search fetchs the result in a Report.
Its some thing new, is it possible..:)
ok will be waiting for your reply..:D
Regards,
Suri
Edited by: user634694 on Feb 25, 2009 3:14 AM

Hi Varad,
am facing problems i wrote dynamic sql its working fine for 2 and 3 fields like (SAP+ORCL) and (SAP+ORCL+HRA) but for the single value like SAP the results are not comming properly. my code is
If (:P25_TEST Is not Null ) THEN
V_Sql := V_Sql||q'!
And
(multipleInstr1(R.Pillar,:P25_TEST)>0 )
or INSTR ( '+' || Upper(:P25_TEST) || '+', Upper(R.Pillar))>0 ) and
((multipleInstr1(R.Product_Line,:P25_TEST)>0 )
or INSTR ( '+' || Upper(:P25_TEST) || '+', Upper(R.Product_Line))>0) and
((multipleInstr1(R.Category,:P25_TEST)>0 ) or (R.Category is null)
or INSTR ( '+' || Upper(:P25_TEST) || '+', Upper(R.Category))>0 )
End If;
where multipleInstr1 is a function created to search results even its delimited by '+' it ignors '+' delimiter and
:p25_test is the popup iteam which takes values like SAP+ORCL+HRA or SAP+ORCL or SAP how its possible to get this results.
Its turning too complicated for cheking condetion for a single popup iteam, can we get any solution for this or not..
Hope will do respond
Thanks and Regards,
Suri

Tolerance Limits: Multiple Invoices for single POs, Single Invoices for Multiple POs

Hi,
I'm currently looking at tolerance limit configurations, primarily the DQ (Quantity) and PP (Price) tolerance keys and had a couple of questions where you have the scenario of multiple invoices or multiple POs.
1. If I had multiple invoices for a single PO, collectively they match the quantity and price on the PO; When I enter the first invoice into SAP it will be well below the lower price and quantity limit of the PO as it is one of multiple invoices to be entered. My question is what happens to the invoices in SAP, do you still post them despite the error message and they are just blocked until collectively the invoices match the quantity/price of the PO?
2. If I had an invoice that related to multiple POs, when entering the invoice can I link this to multiple POs?

You don't use user exits or enhancements for this. Use a data transfer routine and assign it to your item level copy control config. Spilt keys are controlled by setting the value of VBRK-ZUKRI. Otherwise, you can use multiple payers or addresses to control it.

Multiple values for single field

hi
In order to upload Purchase order details, how you handle multiple values for a single field?
Eg: Item field may contain no. of values for a record

Hi,
It is generally taken care using BDC's by Table Control, and if you are using BAPI's then there are tables for ITEMS.
Regards,
Atish

Create Multiple tasks for Single Item in List using state machine workflow in sharepoint

Hi,
I want to create multiple create tasks for Single Item in List based on Assigned to column using state machine Workflow through visual studio
Here Assigned to column allows multiple users. so i have to create task for every user based on column .
I'm trying for this but i didn't got any solution
Please provide solution for this.

Hi,
According to your post, my understanding is that you wanted to allow multiple users to approve.
There are some articles about creating parallel tasks in state machine workflow, you can have a look at them.
http://www.codeproject.com/Articles/477849/Create-Parallel-Task-in-State-Machine-Workflow-in
http://msdn.microsoft.com/en-us/library/office/hh128697(v=office.14).aspx
http://social.technet.microsoft.com/Forums/office/en-US/b16ee858-4360-479a-a686-4ee35b7be9db/sharepoint-2010-workflow-creating-multiple-tasks?forum=sharepointdevelopmentprevious
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Use of multiple Applications for single webdynpro component in ABAP WEB DYNPRO

I am working on a object which have multiple webdynpro applications for single webdynnpro component.How to assign a different functionality to each application bcoz when we right click on webdynnpro component and select create webdynpro applications ,it just creates a application how so we assign diff functionality to each of them .Also in the parameter tab of the webdynpro applications ,there is a diff config id mentioned for each application.what is its relavance

Hi Sam,
Different functionalities for a single webdynpro component can be achieved by many ways. Among them is the use of multiple applications. Say for example if you want different views/windows to be displayed at the start up, you can achieve it by specifying at the default window, for each every webdynpro application.
And if you want control the fields, say for example you want to display input fields as editable for one application and read only for other application, you can achieve it through application parameters. Based on parameters, in HANDLEDEFAULT method of window controller , you can specify the type of behaviour , whether it has to editable or not based on parameters and same can be used at context binding of UI properties.
Application configuration can be used for personalization.Web Dynpro ABAP Application Configuration. This tutorial would help you understanding the concept much better. There can be multiple application configurations for a single application.
Regards,
Harsha

Multiple MouseEvents for single click

Hello,
I have created a reusable component based on a JPanel.
Our company uses my component in several Swing applications, all of which use a JFrame.
My component has a mouse listener for mousePressed events.
Recently a new app, also based on a JFrame, has started to use my component. In this new Swing app, my component's mousePressed listener gets called THREE TIMES for each mouse pressed.
In all other apps, if the user presses the mouse once, I get only ONE call to my mousePressed listener.
Looking at the stack traces into my mousePressed() method I notice this:
In the apps where mousePressed() is only called once, the stack looks like this:
     at java.awt.Component.processMouseEvent(Component.java:5131)
     at java.awt.Component.processEvent(Component.java:4931)
     at java.awt.Container.processEvent(Container.java:1566)
     at java.awt.Component.dispatchEventImpl(Component.java:3639)
     at java.awt.Container.dispatchEventImpl(Container.java:1623)
     at java.awt.Component.dispatchEvent(Component.java:3480)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3450)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3162)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3095)
     at java.awt.Container.dispatchEventImpl(Container.java:1609)
where as when mousePressed() gets called multiple times, the stack trace shows this:
     at java.awt.AWTEventMulticaster.mousePressed(AWTEventMulticaster.java:218)
     at java.awt.Component.processMouseEvent(Component.java:5131)
     at java.awt.Component.processEvent(Component.java:4931)
     at java.awt.Container.processEvent(Container.java:1566)
     at java.awt.Component.dispatchEventImpl(Component.java:3639)
     at java.awt.Container.dispatchEventImpl(Container.java:1623)
     at java.awt.Component.dispatchEvent(Component.java:3480)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3450)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3162)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3095)
     at java.awt.Container.dispatchEventImpl(Container.java:1609)
Does anybody have any idea of why AWTEventMulticaster would be on the stack for one app and not for another?
And how can I prevent getting called multiple times for a single mouse click?
Thank you,
Ted Hill

You don't understand. My JPanel implements the MouseListener interface and its mousePressed(MouseEvent ) method gets called THREE TIMES on a single mouse click. Normally it should only be called ONCE.
It seems that the app that is using the JPanel extension has somehow registered it as interested in mouse events MULTIPLE TIMES.
I've never seen this before in Swing and was wondering if anyone else has.
Thanks,
Ted

Multiple Agreement for Single Project

Hi All,
In our Implementation client generally gets multiple agreements for a single project. How to specify the Agreement Reference when we are creating an Event for billing? By the way have set up the funding option at the Project Level.
Thanks in Advance
Saptarshi

Hi
The problem you are raising has no solution by standard functionality.
Oracle promised to solve that for the first time in release 12.1 that should be available during 2009.
There could be customized solution which involve several parts:
Add a DFF on the event, so user can enter the agreement number.
Guide the user to run the GDI process for range of projects with the parameters - project number and agreement number
Develop a billing extension called on pre-processing of the GDI and another one called on the post processing step of the GDI.
The pre-process billing extension will put all project events that are not of the requested agreement on Hold, and any different agreement should also be "put aside in a non billable situation". The post process billing extension will release the hold from the events, and return the agreements to "normal".
I can admit such customization is ugly and risky. However, we have done it and it is working for us on production for several years. I have presented a paper regarding that on Collaborate 2007. You may look for the paper called: "Is it possible to invoice by contract using Projects Billing", on the OAUG web site.
Dina

Multiple Billings for Single Project

Hi Gurus,
Is there any possibility to do multiple billings for one contract / one project from Project Level.
How can we perform for Milestone / RRB? I appreciate with possible steps / process.
Regards
Naveen

Hi Naveen,
If i understood your query correctly, yes it is possible to do multiple billings for a single project, rather a single sales order.
As far as Milestone/RRB process is concerned, i would suggest you to go through SAP Help or search the forum. The query is very basic in nature and i am sure you will find the required answers in SAP Help.
You can revert with more specific queries once you are done with SAP Help.
Regards,
Gokul

GRC AC 10- Multiple detour for single stage path

Hi Experts,
I wanted to know about a possibility or view. Do you know anyway where we can have multiple detour activated(like first detour 1 then detour 2 check) for single stage.
Actually once we click on routing rule, we get only select single detour selection option.
Please suggest idea.
(I would like to update that we do not want system to have multiple level of approver but only single role owner stage).
Final solution is creating custom detour having ability to handle multiple scenario but we are looking for no custom initiator)
Regards,
Nishant

Hi Nis,
unfortunately in standard solution only one detour path can be added to single stage.
When we had such a challenge, like you described, we simply used custom initiator and this is truly the best option to go.
In our case we wanted to have different path (detour) for roles with special attribute an in the same time different path in case sod issue occurs. In other words we wanted to have 2 detours condition on one stage like you want to have. The option that suites our needs in the best way was to have custom initiator rule.
Filip

Multiple Agencies for Single Breakdown

Hi Experts,
We have a scenerio where Multiple agencies are working for a single breakdown.Here the problem is how to record the multiple agencies in PM workorder.I know main agency should create PM order and others should create Sub order.But may i know is there is any other way also to do this.Here what we are doing suppose there is any breakdown and we want the services from services section then we create breakdown notification by putting the services section workcentre (here agencies are running the notifications raised against their workcenter and providing the service ) but how to handle if there are multiple agencies have to work,Should i create more notification No. for one failure to get the services for the concerns agencies is it rigth to create more than one notification for one failure.
Please suggest me how to overcome this problem.
AR

Hi Amit,
For the scenario of multiple agencies working for single breakdown:
Solution1: Create notification against the main agency work centre. Then the main agency will create a main order against this notification. Other sub agencies will create sub-orders with reference to this main order via T.code-IW36.Advantage of this process is all agencies can work simultaneously on their respective work orders and hierarchy of notification>main order->sub orders can be tracked easily.
Solution2: Alternatively you may also create a single order against the breakdown notification and plan operations with the work centres of main and sub-agencies who are going to work. Each agency will confirm their respective operations only.
Solution3:Main agency may create one breakdown order with or w/o reference to notification. Other breakdown orders may be created by the sub-agencies independantly. At a later stage you may assign the orders of sub-agencies as sub-orders to the main order through T.code IW40. Execute with the respective order nos as input, then select the main order and go to Environment-> Assign Order->Enter the order nos of sub agencies one by one. You can then see the superior order no. in the sub-orders.
Regards,
S.Basu

Multiple triggers for single popup

Similar Messages

Maybe you are looking for