Multiple UOMs in Characteristics (CT04)

Hi Friends,
I have some doubts regarding Characteristics in ECC (created using CT04). The characteristic, say Frequency, can have only one Unit of Measure (Hz) associated with it. However, business users would like to have values entered in other related units (KHz, MHz & GHz). They would like to enter 3 MHz rather than 3,000,000 Hz. Could this be achieved?
Regards,
Anil Madhavan

As far as i know you can only assign 1 UoM to a characteristic. Maybe create additional characteristics for the other UoM's.

Similar Messages

Replenishment in SAP Retail - Article with multiple UOM/EAN

Dear all,
I am using SAP Retail. I have an article with multiple unit of measurement as well as multiple EAN. A good example of this article will be canned soft drinks. It comes in pack size of each, 6, 12, 24. I have only one article number for this soft drink but I maintained multiple UOM and EAN for this article.
When I run auto-replenishment, I can only run it based on one of the packed size (fixed it as the default ordering unit).
Is it possible to run auto-replenishment for the various packed size?
Best Regards
Junwen

Hi,
One suggestion. You can buy it in UOM bottle, minimum qty: 6 bottle. Multiples: Your vendor that decide the package size. When you do the GR then set the UOM of the size package, set a lot size calculation (each 6 units) or rounding profile.
Regards,
Eduardo

Multiple UoM for one Material

Dear All,
For material 100, in UoM tab if multiple UoM are maintained then how do i load the same to BI. Is there specific DataSource available for it?
Please help for the same ASAP.
Regards,
SS

Thanks Akhan,
But then wat is the use of DataSource 0MAT_UNIT_ATTR ?
Let me explain you the scenario :
Suppose Mat A will have UoM as 1 PAL = 3 EA and Mat B will have 1 PAL = 12 EA. Now suppose for a particular transaction record for a given bill number and bill item i have Mat A Quantity 3 PAL and for another Bill no and item i have mat B Quantity 2 PAL.
And say in query i want to show all Quantities in EA then how do i make sure that for Mat A it will show 33 = 9 EA and for Mat B 122 = 24 EA.
Please help for this ASAP.
Regards,
Sohil Shah

Multiple UOM

Hi Gurus
I have material in SRM which has multiple UOM seen in t.code COMMPR01(under tab "material') but while I am trying to create the SC using option "internal goods/services" system defaults the basic UOM(which is grayed out) and doesnt give the option to change the "UOM".
We are on SRM5.0 ECS.
Please suggest what has to be done if I need to use a UOM from list of "other unit of measure" which is different from base unit of measure.
with regards
Manjunath

Hi Manju
In SRM 5.0 , in shopping cart once you choose material in "Internal Goods and Service" , on the same line item you get a drop down where you can choose UOM like EA, PER etc.
This is the standard functionality. if some custom code is written which is causing issue here then you need to check in the code.
Regards
Ashish

Multiple UOM Problem In sales Document

Dear All,
Plz Tell me how i manage the multiple uom in SAP Sales Doc.
For Example - Inventory Uom = KGS
Sales Uom = NOS
An user wants to book the order in pound..
plz give me solution..

You can only have 2 UOM to use for sales document. In your case, apply most used UOM for your sales UOM. I assume it is NOS. For the less used sales UOM such as lb, you may create UDF to print out document. However, the inventory keeping will be a big problem in this case.
If your sales has equaly weighted 2 or more UOM to use, you have to consider add-on or SDK.
The other work around would be creating additional item to get the right quatities through BOM to sell. Sales BOM item will only keep track of inventory on component level.
Thanks,
Gordon

Same ISO Code to multiple UOM

Hi Friends,
Can we assign same ISO code to multiple UOM's???. If so, what will be the efeect??
Thanks in advance,
Steve.

Hi,
Assignment of same ISO code to multiple UoM can be done, but the primary code checkbox must be ticked only for one, else would cause conflict for EDI.
The SAP help reads as below:
An ISO code can be assigned to several internal measurement units.
Use
The ISO code is important for EDI. It is used to convert the internal SAP
measurement units into standard measurement units. Data exchange
via EDI requires internal measurement units to be converted into standard
measurement units.
Hope the above answers your query.
Regards,
Vivek

Reg:Multiple UOMs for same item

Hi,
How to define the multiple UOMs for same item.And the item should be converted in one UOM.
Iam using 9.0 PL.08

Hi,
Please check SAP help file:
http://help.sap.com/saphelp_sbo900/helpdata/en/89/7ca0a701c64e4a97f4ea5a4edca8b2/content.htm?frameset=/en/44/c4c1cd7ca22e17e10000000a114a6b/frameset.htm
Thanks & Regards,
Nagarajan

Characteristics(CT04) Issue.

Dear SD Consultants,
I am having some standard Characteristics(CT04) in Development Server. But i am not having the same in Production Server. Can any one please guide me to transport the standard Characteristics from DEV to PRD.
PLease help me ASAP.
Thanx
Subramanian.Ramasamy

Hi
Subramanian Ramasamy
U need to create Characteristic in CT04 in PD server. It can not be traspoprted from Dev to PD .
THX.

Packaging types in Multiple UOM

I am using the sap b1 9.0 in which multiple UOM for an item has been defined and when I am entering the qty per packaging under purchase tab, I am not able to enter decimal value (for eg: 10.8). it is automatically rounded off to 10. how can I set decimal values in it: pls note when we are using multiple UOM

Hi,
Please check decimal places for quantities under General settings.
Thanks & Regards,
Nagarajan

Batch create characteristics(ct04)

HI all,
I need to create batch characteristics from transaction ct04.
i have tried bapi_character_create but i am unable to create with it.
tried BDC when i try to recording can't see the Value tabs in it.
please give some suggestions, how can i do this.
if anyone have done this before, please forward sampel code to my email address
[email protected]

Hi,
In CT04 the Single & Multiple values means.
For Example in characeteristics if you want to maintain only one reading for characteristics then select the Single value,If you want more than one value for the Characteristics then select Multiple values.
For Example say your characteristics is Speed.you are assign this characteristics to class Motor.
When you attach this class to Equipment say if only one value exist for Speed characteristics for all equipment then specify single value.or if more than one value then specify as Multiple alue.
for Motor A the Value of Speed characteristics is 1500 Rpm
for Motor B the Value of Speed characteristics is 1500 Rpm
for Motor C the Value of Speed characteristics is 1500 Rpm
In this case assign as Single value.
If for Motor A the Value of Speed characteristics is 1500 Rpm
for Motor B the Value of Speed characteristics is 1200 Rpm
for Motor C the Value of Speed characteristics is 1100 Rpm
In this case specify as Multiple value & Maintain in characteristic when you cretae the value in Equipment the 3 option will show to you.from that you can select.
For the 4 digit entry & template.
Check your User profile what template it has given.check with Basis Consultant & ask him to assign the proper user profile to user id.
In menu bar go to System -- User profile-- Own data & check the Default values tab.Check for the template there.
Regards,
Raj

Multiple UOM's

Hello All,
We have an article which is sold in each but when we sell a box it is actually of 12 eaches (when a multiple quantity of such an item is sold we sell it as one item only(1box=1box(base unit in this case)) but we do not mention about eaches). Hence we have set up two articles in our systems with different units of measure. But we want to link the two articles somehow so that we will know that 1 box is 12 eaches.
-Anju

You don't need multiple articles for this. It is possible to use multiple units of meassurement in one article and you can also have a sales price for each UOM/article combination. So in your case you would take each as base UOM and the box as an additional one.
Usually you have also at least one UPC/PLU for such a UOM/article combination.
In your stock reporting everything would be broken down on 'EACH'.
Alternatively you could also implement the box as a sales set of eaches. In this case a BOM is linked to the box, the box would be an own article and and the eaches would be components of this BOM.
However I would recommend to use a UOM of the same article.
Regards Carsten

Character template -In Characteristics CT04

Hi ,
when I am trying to create characteristic for PR total value, by default system is proposing character template as
NN,NNN,NNN like this for length of character, because of this when i give the value to this characteristics like >0, system is converting it to NN.NNN.NNN something like this.
I want to chnage this character template, can anybody tell me where this assignment is done OR how can i chnage this template so that my value for characteristic will remaion as >0.
Thanks,
Charu

As far as i know you can only assign 1 UoM to a characteristic. Maybe create additional characteristics for the other UoM's.

Transport of Class (CL02) and Characteristics (CT04)

Hi Gurus,
Can both class and characteristics be transported using ALE. Example
from DEV to QAS?
I understand in CT04, it is not possible. Everything need to be done
manually to the specific system/client.
Thanks in advance,
Azir

Hello,
Classification data cannot be 'transported', it has to be sent by ALE.
Please see notes 86900 , 45951 and note 10745 for more information on this.
Thanks.

How to create a multiple UOM using DIAPI

Hi all,
I need a sample code for multiple Unit Of Measurement (UOM) using DIAPI .Help me....

Hi there
Normally you cannot use a Button or a Click Box inside a Slidelet. So I'm doubtful you will be able to accomplish this. At least using a Slidelet. Perhaps you could re-think it and create the illusion of a popup window by layering in a Highlight Box or Image object to serve as the background, then presenting the Image and Caption using Advanced or Multiple actions.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

How to create/assign Multiple UOM's for a Service

How do i create more than ONE, "Unit of Measures - for a perticular Service" in a Product Category/Group ?
AC01/AC02/AC03 would allow me to add "BASE UOM", but cant add more than one UOM for that service.
Can we have one-to-many relation between Services & UOM ? if not, how is it done in SRM-MM ??
-Rupesh

Dear Poster
Your thread has had no response since it's creation over
1 year ago, therefore, I am closing the thread.
Should the issue still be outstanding please create a new thread in the relevent forum.
Thank you for your compliance in this regard.
Jason Boggans
SAP SRM SDN Moderator

Multiple UOMs in Characteristics (CT04)

Similar Messages

Maybe you are looking for