Multiple use of the same video time line for different audio tracks

I have a 90 minute video timeline
I will be putting different audio tracks in multiple languages.
But as i was just editing i wondered if i could use only a segment (30 minutes ) of the timeline
along with a 30 minute audio.
Example:
So the first thing on the menu will be the whole 90 minute video
with a 90 minute music track
Second thing might be the 90 minute video with a 90 minute commentary
Third thing might be the first 30 minutes of video with a different commentary
Forth thing on the menu might be the first 30 minutes of video and 30 minutes of
a different language
Etc.
I realize i will need to make space (mb)  for all the audio.....but if i could use the same video or pieces of it
that would be fantastic.
If i can do this i am presuming i should use playlists and chapter playlists to get it done?
I have never done this before and would love some feedback on an over view or tips
that might save me some guess work
Thanks for any help :-)
Soshman

Soshman wrote:
Hey Stan!
Thanks for your help...i think i am really getting this. And have learned a lot.
I had to go back to my computer programming and flowcharting skills to figure out the flow :-)
And i still have 153mb to spare when i build it.
I ended up lining up all the different videos and audios exactly for each time line except for 1 timeline.
Question: I know if the audio is shorter it will be ok.... but if the audio is longer than the video on a timeline ( and its the audio i assigned it by specify link )
Will the DVD keep playing until the audio is done or end when the video is done playing?
2nd Question: I am previewing the playlists with the "Preview from Here" feature
I specify the link and chapter within that timeline ( it is the only timeline with more than one chaper....the one with the longer audio than video from the question above )
For most of the audios i only need video chapter 1.....the preview here plays it ok but if i hit the skip to next (in the preview button on theright of the play button)...it goes to the next chapter #2... instead of the next timeline chapter 1 like it is programed to do from the playlist.
I am wondering if this is just fluke in the preview feature...or will it do that on the actual DVD as well?
Lastly because i am using different timelines. I am wondering if there are delays between playlists? for example...i have a long audio that continues between three timelines...i have spliced it pretty fine so it picks up perfectly on the next timeline...but i am wondering if the DVD when playing in realtime will have a little black space inbetween timelines.
Thanks again for your help and time :-)
Mark
Hiya Mark.
DVD-Video is video dominant, with the audio always following the visuals so if the audio ends berfore the video it will not (okay, should not) be a problem.
However, the other way around could go either way - if the actual video timeline has ended the audio may well truncate so I would personally add videoblack at the very least.
I am also not at all sure how you are going to work a single contiguous audio file across 3 separate playlists. This sounds flawed in concept to me (have I misunderstood your meaning?). In DVD-Video the format is graphically/visually dominant - the audio must always be tied to a visual asset be it a menu or a timeline - so there is no way to have one piece of audio playing across 3 timelines and having it play back glitch free whilst the timeline changes. You will not get a black space - it will simply stop. So unless I have misunderstood you in some way.........
As Stan says, preview is flaky - the only way to know for sure is to multiplex & burn.

Similar Messages

  • Same video footage encoded with different audio tracks (localization)?

    Hi All, thanks for your time first of all.
    Let me explain the issue I have; there are 5 video files and  10 audio files for each of them. That means I need to encode in total 50 videos. I can do this by hand, the video and audio files are the same length, so it would just means swapping one out for the other and encoding again...
    But I was wondering if it was possible to automate this process? Let's say take the video footage and render is out with Audio1, then render it out with Audio2 and so forth.  Is this something that is possible with AME or in Premiere or any other Adobe package?
    I hope I explained this well enough, if not, please let me know!
    Thanks.
    -Woody

    You can add the video footage to a sequence, then add the first audio clip.  Set up your export and hit the Queue button.  That will send the sequence as it exists then to the Adobe Media Encoder.
    Go back to that sequence, remove the first audio file and add in the second.  Do another export.  Your settings should be the same so you can just hit the Queue button.  This ads another item to the list in AME, but this one is a snapshot of the sequence with the second audio.
    Repeat as necessary, all using the same sequence.  (Trust me, it'll work.)
    Go into Adobe Media Encoder and start the encoding.

  • How do i delete multiple files of the same video in the "all videos" folder?

    i am running out of space on my computer so i went to the "all movies" folder to see if there were items there i could get rid of.  when i went i discovered that there were many instances of the same video being there as many as 4 or 5 times.  why is that?  i tried to delete them but they still remain.  how can i single it down to just one file?

    try the script (version 3) in this post,
    Remember last folder location lost with Mac Lion updates

  • How to own the same e-mail-address for different Apple-IDs

    Hello
    I’m under the impression, that I can’t use the same e-mail-address for iCloud I used already in my Apple-ID for iTunes, because I get no verification mail for the iCloud account. Is this correct or did I something wrong?
    Thanks for supporting me
    I already raised this question in the iCloud forum, but till now nobody answered - may be the wrong sub-forum

    Many thanks for the answer - that's what I suspected. Anyway...
    The problem I have now is, that my Apple-ID I used already for some years in order to buy apps is in the "old" format (e.g. duggy832), that means not in the form of an eMail-address. iCloud accept only Apple-IDs in the “new” format meaning in the form like an eMail-address (e.g. [email protected]).
    So it needs to modify the old Apple-ID from duggy832 to [email protected] or to “transfer” – if possible – my shopping from Apple-ID duggy832 to [email protected]
    Which way is possible, which is safe/secure, which is recommended?
    Thanks in advance

  • BExAnalyzer: Multiple use of the same Query in a Workbook - Command Button

    Hy Gurus,
    in my Workbook I have in Sheet 1 one Analysis Grid, defined as DP_1
    in Sheet 2 it is an other Analysis Grid defined as DP_2
    Both Data-Provider refer to the same technical BW Query.
    If I add a Button (from the BEx Toolbar) and try to refresh the first query (with commands: PROCESS_VARIABLES and VAR_SUBMIT) both Queries will be refreshed with the same variable value, even if i mention "DP_1" as Data_Provider in the button.
    But I don't want, that the second query is been refreshed too (with the same variable value).
    In the workbook Settings, I already checked on: Allow refresh Function for Individual Queries.
    Can anybody help?
    Regards
    Klaus

    It is not a solution to copy the query. We will need this feature for about 50 Workbooks/Queries and so it is the problem to keep the copied queries consistent
    If I refresh the Queries manual with the the "Change Variable Values" Button I get a pop-up with two fields where i can input two different values - here it works.
    Can I achieve the same with the command buttons?
    The definition of the first command button is like this:
    Name                       Index     Value
    DATA_PROVIDER     1           DP_1
    CMD                           1          PROCESS_VARIABLES
    SUBCMD                    1          VAR_SUBMIT
    Command Range: A2:C5 (there is the Name, Value, Sign and Operator of the Variable).
    The second command Button:
    Name                       Index     Value
    DATA_PROVIDER     1           DP_2
    CMD                           1          PROCESS_VARIABLES
    SUBCMD                    1          VAR_SUBMIT
    Command Range: A12:C15 (with a different Value of the Variable).
    If there is one query in the workbook it works fine, but not for two queries, even if I change the Index of the second button to 2.
    Thank you for your hints.
    Regards
    Klaus

  • How can I use the same thread pool implementation for different tasks?

    Dear java programmers,
    I have written a class which submits Callable tasks to a thread pool while illustrating the progress of the overall procedure in a JFrame with a progress bar and text area. I want to use this class for several applications in which the process and consequently the Callable object varies. I simplified my code and looks like this:
            threadPoolSize = 4;
            String[] chainArray = predock.PrepareDockEnvironment();
            int chainArrayLength = chainArray.length;
            String score = "null";
            ExecutorService executor = Executors.newFixedThreadPool(threadPoolSize);
            CompletionService<String> referee = new ExecutorCompletionService<String>(executor);
            for (int i = 0; i < threadPoolSize - 1; i++) {
                System.out.println("Submiting new thread for chain " + chainArray);
    referee.submit(new Parser(chainArray[i]));
    for (int chainIndex = threadPoolSize; chainIndex < chainArrayLength; chainIndex++) {
    try {
    System.out.println("Submiting new thread for chain " + chainArray[chainIndex]);
    referee.submit(new Parser(chainArray[i]));
    score = referee.poll(10, TimeUnit.MINUTES).get();
    System.out.println("The next score is " + score);
    executor.shutdown();
    int index = chainArrayLength - threadPoolSize;
    score = "null";
    while (!executor.isTerminated()) {
    score = referee.poll(10, TimeUnit.MINUTES).get();
    System.out.println("The next score is " + score);
    index++;
    My question is how can I replace Parser object with something changeable, so that I can set it accordingly whenever I call this method to conduct a different task?
    thanks,
    Tom                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

    OK lets's start from the beginning with more details. I have that class called ProgressGUI which opens a small window with 2 buttons ("start" and "stop"), a progress bar and a text area. It also implements a thread pool to conducts the analysis of multiple files.
    My main GUI, which is much bigger that the latter, is in a class named GUI. There are 3 types of operations which implement the thread pool, each one encapsulated in a different class (SMAP, Dock, EP). The user can set the necessary parameters and when clicking on a button, opens the ProgressGUI window which depicts the progress of the respective operation at each time step.
    The code I posted is taken from ProgressGui.class and at the moment, in order to conduct one of the supported operations, I replace "new Parser(chainArray)" with either "new SMAP(chainArray[i])", "new Dock(chainArray[i])", "new EP(chainArray[i])". It would be redundant to have exactly the same thread pool implementation (shown in my first post) written 3 different times, when the only thing that needs to be changed is "new Parser(chainArray[i])".
    What I though at first was defining an abstract method named MainOperation and replace "new Parser(chainArray[i])" with:
    new Callable() {
      public void call() {
        MainOperation();
    });For instance when one wants to use SMAP.class, he would initialize MainOperation as:
    public abstract String MainOperation(){
        return new SMAP(chainArray));
    That's the most reasonable explanation I can give, but apparently an abstract method cannot be called anywhere else in the abstract class (ProgressGUI.class in my case).
    Firstly it should be Callable not Runnable.Can you explain why? You are just running a method and ignoring any result or exception. However, it makes little difference.ExecutorCompletionService takes Future objects as input, that's why it should be Callable and not Runnable. The returned value is a score (String).
    Secondly how can I change that runMyNewMethod() on demand, can I do it by defining it as abstract?How do you want to determine which method to run?The user will click on the appropriate button and the GUI will initialize (perhaps implicitly) the body of the abstract method MainOperation accordingly. Don't worry about that, this is not the point.
    Edited by: tevang2 on Dec 28, 2008 7:18 AM                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • How to run the same procedure in parallel for different parameter value.

    Hi There,
    I am currently working on extracting data in to flat file and I am able to do so for one revenue month (e.g. 200101) using PL/SQL procedure(get_rev_data). it takes almost 1 hour to execute the procedure completely and it generates 400 MB data file. Now I have to run this procedure for last 10 yrs of data (i.e. 120 revenue months) . my prolem here is to figure out a way/logic in such a way that I can run the procedure in parallel for each revenue month and at the same time it will write the data in respective data file for each revenue month. so the final result of this exercise would be 120 flat files, one for each revenue month with file names like
    EXTRACT_00001001 to EXTRACT_00001120.
    where
    first five digits : 00001 will indicate the Extract run number and
    last three digits : 001 will indicate the thread number for each run.
    I am thinking of doing this by creating a table "RevMonth" with two values (revenue_month, thread_num) and calling the procedure in a simple select statement and passing revenue_month as parameter of the procedure like
    SELECT get_rev_data(revenue_month, thread_num)
    FROM REVMONTH;
    But I am not sure if that will do the needful. Any idea on how to achieve this will be of great help. Thank you.

    Hi Smit,
    Thanks for the advise. I am not planning to run for all 120 months at once. actually I am planning to run like 1 year (12 revenue months at a time). I am not sure if that will work well but I was planning to run this through shell script (Unix) and will call the same procedure with different parameter (revenue_month and Thread_number) values and see what happens. I hope that will run in parallel for each revenue month.
    Let me know if you have more knowledge about it. THanks a lot.
    Thanks,
    .

  • CRM WEBClient UI -The same screen-menu appears for different Business Roles

    Hi Experts,
    We are working with CRM 2007 and are facing the following problem:
    After starting the CRM WEBClient , a screen with two Business Roles appears: u2018SALESPROu2019 and u2018SERVICE PROu2019 (because in my User I have added the roles: SAP_CRM_UIU_SRV_PROFESSIONAL & SAP_CRM_UIU_SLS_PROFESSIONAL).
    I select the one of the two roles (e.g. SALESPRO) and then I choose u2018backu2019 and select the other Role (SERVICEPRO) but the same screen appears with the menu from SERVICEPRO .
    I noticed that the menu that appears has to do with which business role I select first.
    Do you have any ideas what could be the problem?
    Best Regards,
    Roula

    Hi Roula,
    In CRM 2007, the CRM Webclient doesn't have the capability to switch from one business role to another directly as you are trying to do. The only option to switch is to logoff from Webclient and login in another role.
    regards
    Srikantan

  • Troubles with multiple ESLL-SRVPOS in the same outline agreement line item!

    Hi all,
    Currently have an issue where the same service master is being used multiple times in a single outline agreement line item (set up with different groups in the service specifications with different rates).
    This is causing issues with drawing services into purchase orders.
    Eg: In ME57 when creating a PO from a PR, in the include LMLSPF5J /SEARCH_SRVPOS_CONT/ the system is checking if ESLL-KNT_INTROW is empty (which in my case it is, and message SE361 is displayed).
    The main thing thats happening is that ESLL_KNT_PACKNO and ESLL_KNT_INTROW, which hold the reference data to the outline agreement in the PO should get filled with the packno and introw from the oa service line but it isnt happening.
    I'm thinking of creating a validation so that the same service service number (ESLL-SRVPOS) CANNOT be used in the same outline agreement line item.
    Wondering if anyone has had this same issue and what path they went down to resolve it.
    Any ideas would be appreciated.
    Tim

    hi
    u cannot do this because different line items cannot be in same cell as they are variable and only one field can be there ata atime in one column while creating field catalog
    <b>u can do one thing. corresponding to sales order u can display its line items ion the secondary list and would make more sense also. for this make ur sales order number as HOTPOT on click of which will display its corres line items </b>
    regards
    ravish
    <b>reward if useful</b>
    Message was edited by:
            ravish goyal

  • Can we have multiple Podcasts with the same Mac Account?

    Hi all,
    Can we have multiple Podcasts with the same Mac Account?
    For example, I have a single .MAC account and create a website with multiple Podcast pages...or within iWeb I create multiple sites, and each has a podcast.
    Is there a problem?
    Thks
    Leo

    Its not possible for the same development object. Only 1 person can access an object at a time and if mutiple users modify an object new TASKs are created under the same TRANSPORT.
    Only after releasing the tr you can create a new tr on the same object.
    Message was edited by:
            Abhishek Jolly

  • Multiple windows of the same class with a different argument

    Suppose I have a main window with a list of users. If I click on any one user, the "chat window" should open with the argument as that "user".
    If i click on another, a similar "chat window" should open but with a different user.
    I can't have so many stages because I don't know how many users are there.
    How do I open multiple windows of the same class but with a different argument?

    Here is a sample (opens, at random locations, a bunch of child windows parameterized by color).
    Could be simpler, but hopefully you get the gist.
    import java.util.Random;
    import javafx.application.Application;
    import javafx.geometry.Rectangle2D;
    import javafx.scene.Scene;
    import javafx.scene.control.Label;
    import javafx.scene.layout.StackPane;
    import javafx.stage.*;
    public class ColoredStages extends Application {
      final String[] colors = { "firebrick", "palegreen", "azure", "chocolate", "goldenrod" };
      final Random random = new Random(42);
      Rectangle2D screenBounds;
      public static void main(String[] args) { launch(args); }
      @Override public void start(Stage stage) {
        screenBounds = Screen.getPrimary().getVisualBounds();
        stage.setTitle("Primary");
        stage.setScene(new ColoredScene("cornsilk"));
        stage.show();
        for (String color : colors) {
          Stage coloredStage = new ColoredStage(stage, color);
          coloredStage.show();
      class ColoredStage extends Stage {
        ColoredStage(Stage owner, String color) {
          super();
          initOwner(owner);
          initStyle(StageStyle.UTILITY);
          setX(screenBounds.getMinX() + random.nextInt((int) screenBounds.getWidth()));
          setY(screenBounds.getMinY() + random.nextInt((int) screenBounds.getHeight()));
          setScene(new ColoredScene(color));
      class ColoredScene extends Scene {
        ColoredScene(String color) {
          super(new StackPane());
          StackPane layout = (StackPane) getRoot();
          layout.getChildren().addAll(new Label(color));
          layout.setStyle("-fx-font-size: 20px; -fx-padding: 30px; -fx-background-color: " + color);
    }

  • Can you use sync on multiple computers at the same time? ie have someone else logged into your firefox account for you whilst you are also logged in

    I am trying to sign up to something but there is only a short window so was going to ask a friend to sign in at the same time using my account to try to sign up (with my password being saved into my firefox account)

    Hi. Yes, you can use Sync on multiple devices at the same time. I use it to keep my bookmarks in sync across my desktop and Android versions of Firefox.

  • How to use multiple proxies at the same time?

    im planning to use multiple proxies at the same time on mac but i have no idea how to do it?!. i need help!thanks!

  • I bought a bluetooth Bose speaker so I could listen to music from my imac in multiple rooms at the same time. I wanted to use BOTH my existing speakers using the headphone jack and add additional bluetooth speakers in other rooms, but the imac wants me to

    I bought a bluetooth Bose speaker so I could listen to music from my imac in multiple rooms at the same time. I wanted to use BOTH my existing speakers using the headphone jack and add additional bluetooth speakers in other rooms, but the imac wants me to pick one or the other, is there a way to have both?

    I asked same question
    Any answers

  • How can i use in the same time input line and mic to recorder in several track whit SONAR

    I have beem recording only input line because SONAR 4 not recognized the mic in, Help me!!!.
    Thank you. Sorry for my english

    LIMACAR wrote:
    How can i use in the same time input line and mic to recorder in several track whit SONAR 4. I have beem recording only input line because SONAR 4 not recognized the mic in, Help me!!!.
    Thank you. Sorry for my english
    Depending on which soundcard you have there, but if your card is capable for
    ASIO -> activate I/O drivers on Sonar/Options/Audio/Drivers -tab (mic/line sources should be listed there --> activate) and select the mic or/and Line sources on tracks "I" - dialog
    WDM/KS -> use the Surround Mixer or windows recording controls for recording source selection (mic should be listed there)
    MME32 - > same w/ WDM/KS
    If you use Asio4All --> same w/ WDM/KS & MME32
    No mic and line source simultaenously w/ WDM/KS and MME32.
    You perhaps be able to do this w/ kX drivers.
    jutapa
    ADDED:
    You can also install modded version of Audigy 2 drivers/software but I have never done this w/ Li've! 5. so I can't be sure if you get ASIO support for your card.
    Here are the instruction --> http://www.tech-pc.co.uk/audigy-2.php
    jutapaMessage Edited by jutapa on 05-25-2006 02:48 PM

Maybe you are looking for