Multiple user on the same Network

hi,
I am working on network, i would like to setup a network schema which can be accessed by multi user, each user should work on particular portion of network, without disturbing others.
How can i set up this kind of architecture,
whether one network can be partition for multi-user or any other alternative is there...
Rams

tastyrico wrote:
Hi Drew,
Thanks for the recommendations. They are useful tips to have in the arsenal, thanks. However, the preferences discussed are intended for directly attached external hard disks and the specific discussion was to make it available to the network on a Mac that is powered up with no user logged in (like a OS X Server but user still need to log in).
That's correct, I'm sorry I am wrong.
I do remember another defaults write option for detaching network drives on 'switch to loginwindow' because I needed the same thing - eventually I gave up & disabled fast user switching, it reduced the amount of issues for the clients. Sorry for confusing the two.
Have you considered mounting it via a startup script. At the moment it is failing because the path exists when User2 mounts it. If you try a script (at the level of the system) it should mount only once. Obviously sticking usernames & passwords into a script is not the best for security.
I think this issue is what NFS mounts can overcome, but I haven't used them for so long. They should be able to mount with no user interaction, but they are less flexible with permissions IIRC.
If your NAS supports NFS look at that, I think you both need to remove the user as the agent that mounts the disk. If the OS does it once (& permissions are correct) it should remove the 'diskname-1' issue.
When it works you end up with volumes in /Network/diskname.
I don't have a good place to start with NFS, so take a look around here…
https://discussions.apple.com/thread/4144999
@ElisabethBraut, do you get this error form MS…
http://support.microsoft.com/kb/2712085
MS apps fall apart when you have disks mounted like this, it's a consequence of MS apps using an older way to represent filepaths.

Similar Messages

Multiple Users Mounting the Same Network Share?

Hello, first time posting...
I'll cut right to my main question: Is it possible, on OS X v10.3.9, for multiple users to simultaneously connect to the same network share?
Here in my office, we have a single Mac that is used by multiple people throughout the day. It has two accounts on it, 'Communications' and 'Studio'. 'Communications' is an Admin account that is used by a co-worker who spends the most time on the Mac. He created the no-limitation 'Studio' account for the rest of us to use.
There is a certain Windows network share that we both frequently use. We've found that if one user connects to the share first, the other user will not have access to it; using 'Go -> Connect to Server' will result in the share being greyed out in the list, and the share will not show up in the Finder.
However, there is one way around it. If Studio connects to the share first and then Communications (the admin account) attempts to make a connection of it's own *through a shortcut on the dock*, then a 'clone' of the share will be created on Comm's desktop, with a "-1" after the name (though it might be some other number).
This may sound like I've answered my own question, but what I'm looking for is a way for the non-Admin account to access the share after the Admin account already has (so that we don't have to log-in and disconnect Communications everytime Studio needs to manage files on the share).
We have Thursby Software's DAVE installed on the Mac, but I'm not sure how it fits into all this.
Any thoughts, suggestions or advice?
Thanks.

Bizarre. It turned out I could merge them, but only in to the mapped drive - L: - and only by explicitly clicking on the drive icon - if I typed L:\series in to dialog box it converted it back to \\nas\share\series... Not helpful.

There are multiple users with the same display name

Hi,
We have a user and when she get an item assigned to her she sees the following alert:
"There are multiple users with the same display name USERNAME and at least one of them does not have read permissions to some of the files"
Now I looked in the database and when I run the following query with the username:
SELECT
[ProviderDisplayName]
,[DisplayName]
,[HasDisplayName]
,[Domain]
,[AccountName]
,[UniqueUserId]
,[LastSync]
FROM [Tfs_Configuration].[dbo].[tbl_Identity] where displayname like '%USERNAME%'
Then I get 2 same usernames back, How can I get rid of one of them ? When I access TFS trough the portal I only find 1 occurence of this user.
We use VS2013 and TFS2013 update 4
Best regards

Hi DSW,
Thanks for your post.
In your query result, please check if these two users have the same Account Name. if they are two different Account Name in result, it indicate there’s two users have the same display name in your AD, please check that two users’ information in
your AD. We suggest change one user’s display name in AD.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Find my Friends : Support for multiple users under the same Apple ID?

Can multiple users under the same Apple ID use the app to find each other? My daughter uses my Apple ID with her iPod touch which allows me to monitor her purchases but it seems that only one device under an ID can use the app at a time. If that is the case then it is a major disadvantage and I will need to go back to using latitude (or Find My iPhone which also allows me to see where all of my devices are at the same time)

http://isource.com/2011/10/16/how-do-you-set-up-icloud-for-a-family/
This worked for me.

Multiple users on the same ODI installation?

Hi all
is it possible to have multiple users working with the same odi installation? We have a virtualized IT infrastructure (citrix and wmware) where we can have multiple users on the same virtual instance. From our point of view, there is no licencing issue since we have a package covering literally everything.
One of the issues are the config files stored in the installation directory of odi (../bin). Is there a way to tell odi to store them in a different location, eg. the user home?
Thanks a lot
Benno

ODI looks in the current working directory for the configuration files, mostly you would have issues with the snps_login_work.xml and snps_login_security.xml files, but these may be common across all users. (just don't store the username/passwords for the ODI users in them).
The way ODI works, most of what are creating is stored in the repository anyway, it is only local GUI config stuff that may be stored locally.
Short answer, yes, you can, but might need to modify the config files a little to make it work.

WebTools Creating multiple users for the same User

I had to make a few changes to a BP in SAP which will synch back into WebTools but now I am getting multiple users for the same contact. For example my user is cspehar_1 now in Webtools there are cspehar_1, cspehar_2, cspehar_3 and so on up to _8.
This is occuring for several users in webtools.
What causes this and how do I fix it?
Thanks,
Craig Spehar

Hi Craig,
There are two ways to cause this that I am aware of:
1. Change the "Business Partner Synch Contacts Field" setting after the initial synch.
2. Change the Web UserID on the BP contact in B1 (OCPR.U_PRX_SID).
After that, update the user in WT and synch. (might also happen if you update the BP in B1)
Since the synch is using the OCPR.U_PRX_SID to identify the contact, it will not be able to find it in B1 if the U_PRX_SID has changed. When it does not find it, it assumes it needs to be created. This results in a duplicate.
The solution is to reset the U_PRX_SID back to what it was or set the synch contact field back to what it was.
Then delete the last created duplicate contact from B1.
There may be further data corruption issues here. If orders/quotes/opportunities or other dependant data has synchronized referencing the duplicate user, these data will need to be correct as well.
FYI, whatever caused this was probably at the root of your order problem as well.

Importing Photos and Music from Multiple users on the same Mac

I am the same person with multiple users on one iMac. I need to have the same pics and music files on all of the user names on the one computer.
I have the family pack MobileMe plan.
Where are the files located for the photos and music in iTunes?
I would like to import them from one user to another user on the same computer.
Thank you

Welcome to the Apple Discussions.
If you Import the files from one User to another then you will use double the disk space on your HD as you will have multiple copies of everything. Why not simply share the files between accounts?
For iPhoto 09 (version 8.0.2) and later:
What you mean by 'share'.
If you want the other user to be able to see the pics, but not add to, change or alter your library, then enable Sharing in your iPhoto (Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other account. In that account, enable 'Look For Shared Libraries'. Your Library will appear in the other source pane.
Any user can drag a pic from the Shared Library to their own in the iPhoto Window.
Remember iPhoto must be running in both accounts for this to work.
If you want the other user to have the same access to the library as you: to be able to add, edit, organise, keyword etc.
Quit iPhoto in both accounts. Move the Library to the Users / Shared Folder
(You can also use an external HD set to ignore permissions, a Disk Image or even partition your Hard Disk.)
In each account in turn: Double click on the Library to open it. (You may be asked to repair the Library Permissions.) From that point on, this will be the default library location. Both accounts will have full access to the library, in fact, both accounts will 'own' it.
However, there is a catch with this system and it is a significant one. iPhoto is not a multi-user app., it does not have the code to negotiate two users simultaneously writing to the database, and trying will cause db corruption. So only one user at a time, and back up, back up back up.
Regards
TD

Multiple users, using the same web app items?

Iam building a service for familes were the parents should be able to read / add / edit the same secure web app items.
So when logged in the user have access to the same user submitted web app items.
I found a thread answerd by Liam and my guess this is not possible? Can it be partial be done e.g. just let the "family" read the familys items? And no there is not possible to add / pair the users in backend because there are to many.
Any tip where to look? I have tried to use the "uniqe ID, datasource, unique template" method but do you "wizards" :-) think that's the way to go?
This thread suggest it's not doable.
http://forums.adobe.com/message/5547102
Thanks!
//Johan
Formpartner

Not in association Johan no.
You can have one "Family" login they all use to log in but it will kick one out if the other logs in and of course, multiple people sharing the same login increases the security risk.
You can only set one owner as well.

How to support multiple users at the same time?

Hi all,
I have a Labview software which controls a analyzer via GPIB connector. When user A is using the software, user B has to wait until A is done. But actually, the analyzer is not very busy, when user A is using the software.
I want user A, B, C and D can use the software at the same time. just like we can open Multiple websites at the same time.
How can I program the software, so that the software can be open multiple times? Do you have any example?
Thanks a lot.
Steven
Solved!
Go to Solution.

Are all the users going to be measuring the exact same thing from the same instrument?
It would be possible to write a separate instrument server application that would handle all the direct interactions with the instrument. When one of the users needed to access the instrument, they would gain access to it through this server.
The big, Big, BIG caveat is that each interaction with the instrument would need to be atomic. In other words each access would need to configure the instrument, initiate the reading, report the results, and then reset the instrument back to some known default value.
As Dennis said, not a trivial process, but probably do-able...
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

What's the problem with having multiple users with the same UID?

I've got three edit systems connected to the SAN using open directory off our server.
I want all edit systems to have read/write access to everything created. I don't need to protect anything from any of the systems. With all three systems logged on using the same user, I never have to change permissions.
The other cool thing about this is that Final Cut Pro will let me know if someone else is modifying a project that I have open with the warning:
“The project "projectName" has been modified externally. If another user is working on it, saving will overwrite their changes. Do you still want to save?”
This sounds great, right?
RED FLAG!!!! Apple gives the warning in this article:
http://docs.info.apple.com/article.html?artnum=302450
"You should not allow two users with the same UID to access an Xsan volume at the same time."
So why is it bad to have two (or more) users with the same UID?
I can see that in some situations it means that you can't prevent people from read/write privileges. But I don't want to restrict privileges.
What am I missing? With all of these warnings, it seems like if I do this my edit systems could all explode or something. Please help me understand the potential ramifications of having three users have the same UID.

Hi Russell,
1) If you have OD set up and "editor" has UID 1111, then when they log in to any machine that's bound to OD as editor, they will get UID 1111. Therefore, there won't be any of these permission errors. This is typically the recommended approach.
2) I assume you mean "You'd prefer to not using open directory?" Whatever the case, OD isn't mandatory with Xsan -- it's just that with multiple user accounts, managing them centrally tends to be easier. For 3 or 4 accounts and 3 or 4 machines maybe it's no big deal. If you go larger, it could get a lot more complicated. That said, if you set it up such that each machine has the exact same set of users (as you said, Mary = UID 502, Fred = UID 503, William = UID 504), then you can do what you want. Mary can log in from multiple machines at the same time, and in general you won't have permissions problems. Of course, if you try and read and write the same file from multiple workstations at the same time, you will get file locking issues, which will prohibit somebody from successfully writing the file.
File locking issues are different from general permissions errors. The former basically says "hey, someone else is editing this file. Therefore I won't let you edit it right now... you can read it if you want though." Permissions means somebody saves it, and Xsan thinks you saved it and own the file, when you really don't.
Quad-Core PMG5, 4 GB RAM, 7800 GT, 1 TB disk. Mac OS X (10.4.4)

Sharing one Aperture Library between multiple users on the same machine

Is there a way of setting up Aperture so that two different users on the same machine have full rights to do everything?

Ian,
Thanks for the suggestion. It certanly better than nothing, but in my case there is no partition with permissions off and there are other users to whom I wouldn't want to give full rights to the library. As an alternative I thought of simply creating a special user and do all editing from it.
At any rate, it would have been useful if Aperture had something like that built in - like a preferences option, where one could specify a MacOS group name, and Aperture would do all its file/folder create operations within a given library with setgid()/setegid() of that group and corresponding umask() to give rw permissions to that group. Not too hard to do, either.

Can multiple users on the same PC use Elements 11

I can access Elements 11 as myself but other users on the same PC can see the images but when the image is clicked it comes as a missing file.

Nothing to do with the software itself, you need to adjust your user privileges and file permissions and possibly manually reinstate some file associations stuff. Refer to some basics here:
Installation Preparations
Mylenium

"multiple users" on the same computer

I'd like to access the same project with different users on the same computer.
Getting the permissions setup for the folders and files was not a problem.
But ... FCPX is not "seeing" the projects and events created by the other user;
1) They don't show up in the project window (of the new user) when he boots FCPX
2) I can't seem to import the projects (their grayed out)
I need two seperate users to work on a projects using the same computer.
But I want each user to access the project from their own "user profile"
Is that do-able?
If not I would at least like to re-import the same project
from the other users account/profile.
I hope that's clear

Michael_North wrote:
Right ...
In this case, the Projects and Events are NOT in the movies folder of user 1.
They're on a separate drive ...
On the same computer.
You'd think after the permissions are set up, that it would work.
I can understand that booting the program from users 2's profile
would leave FCPX unaware of the existence of the projects.
But there must be some way of re-importing the projects in the user 2's profile ... right?
There is no re-importing; it should just work. If both users have read/write access to drive, the events and projects should be accessible to FCP X. Are you sure the permissions are ok?
The easiest way to handle this situation is to check the box for "Ignore ownership on this volume" in the Finder: select the drive, choose Get Info, unlock, check. Of course, then all files in the volume will be fully accessible to any user of this mac, but if there are only 2 users, and you both know what you are doing, it will avoid loads of permission problems.

Multiple users on the same device

Can I have 2 or more users on the same device? I want to use a Kindle Fire HD when traveling with separate accounts for my wife and myself.

You can; you just have to disable automatically signing one of you in (unless you want to constantly log the other one out)

Make library available to multiple users on the same computer

I want to have the library available to more than one user on the same computer. The "share my music" option doesn't seem to help. I also tried running iTunes as the second user and setting the library file to the one I had created as the first user, but nothing happened. Any suggestions?
HP desktop Windows XP

See if this helps: iTunes: How to share music between different accounts on a single computer

Multiple user on the same Network

Similar Messages

Maybe you are looking for