Multiple users responsible selection in QM01 to send the email

Hi,
In QM01 we use to create the notification as per the notification type. We are using Noti. Type Q6 (Finance Notification). In the Partner field we used to put number  of person responsible and then we used to click on the SEND EMAIL , a screen pop up and from this screen we have to select the user responsible to send the email.
Now we want to select the multiple users responsible at a time not one by one. Request you to please let us know if any setting is there so that we can select the multiple users at a time to send the email.
Thanks in advance.

hi,
Thanks for the update. However how can I go to QQMA0008 --> QM/PM/SM: User Subscreen for Additional Data on Notif. Item
Here you can give pop-up where you can get the list of the Users responsible.
Please guide me.
thanks
satish

Similar Messages

  • The problem is with the new operating system  and sending photo via email when used in my iPad.   From photo I selected 3 photos to send via email. I choose the upload key and choose to send by email. Typing text on the email is very slow.

    The problem is with the new operating system  and sending photo via email when used in my iPad.
    From photo I selected 3 photos to send via email. I choose the upload key and choose to send by email. Typing text on the email is very slow. This is solved by saving the email as a draft and opening the email again from mail.
    Can you amend he system to allow emails to be sent from photo as previously.

    Have you tried restarting or resetting your iPad?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

  • HT4847 Can I have multiple users's family devices backed up to the cloud e.g. 2 iPhones and 2 iPads under the same iTunes account

    Just got a second iPad for the home.
    Can I have multiple users's family devices backed up to the cloud e.g. 2 iPhones and 2 iPads under the same iTunes account?

    Yes, but it's not usually recommended to share an iCloud account within a family.  If you do, any data you sync with iCloud will be merged and you, for example, will end up with each other's contacts and calendars on your devices.  Also, any action taken on one device (such as adding or deleting a contact) will be replicated on the other devices.  You will also all be sharing the same 5GB of free storage for all your data and device backups.
    Normally it's best to use separate iCloud accounts for each person's devices.  This will keep your data separated, and allow each person to have their own free 5GB of storage.  You can continue to share the same iTunes ID within the family; the ID you use for iCloud does not need to be the same as the one your use for iTunes purchasing.  (Each person should also use a separate ID on their devices for iMessage and FaceTime to avoid getting each other's text messages and FaceTime calls.)

  • How to send the email without using SOST

    Hiiiiii Every1,
    What i m usiing is SO_NEW_DOCUMENT_SEND_API1 FM to send the email to internet add. as well as SAP User.
    The Problem is that i have to go to SOST to send the  Pending mails. and send the jobs manually.
    Then it works all right.
    What i want that i don't wnat to send this jobs/ emails mannually by going to SOST..
    Is it possible to do it without using SOST.

    hi
    i am not sure but give this code a try
    REPORT YEMAIL.
    TABLES: USR02.
    DATA: C(15).
    DATA: SENT LIKE SONV-FLAG.
    DATA: EMAIL_ID LIKE SOFOLENTI1-OBJECT_ID.
    DATA: BEGIN OF EMAIL_DATA.
            INCLUDE STRUCTURE SODOCCHGI1.
    DATA: END OF EMAIL_DATA.
    DATA: BEGIN OF EMAIL_SEND OCCURS 10.
            INCLUDE STRUCTURE SOMLRECI1.
    DATA: END OF EMAIL_SEND.
    DATA: BEGIN OF EMAIL_TEXT OCCURS 10.
            INCLUDE STRUCTURE SOLISTI1.
    DATA: END OF EMAIL_TEXT.
    PARAMETERS: ALL__CLI RADIOBUTTON GROUP RADI.
    PARAMETERS: THIS_CLI RADIOBUTTON GROUP RADI.
    PARAMETERS: SELECT__ RADIOBUTTON GROUP RADI.
    SELECT-OPTIONS SEND_TO FOR C NO INTERVALS.
    SELECTION-SCREEN SKIP.
    PARAMETERS: SUBJECT(30).
    SELECTION-SCREEN SKIP.
    SELECTION-SCREEN COMMENT /1(20) TEXT-999.
    SELECTION-SCREEN BEGIN OF LINE.
    PARAMETERS: L1(84).
    SELECTION-SCREEN END OF LINE.SELECTION-SCREEN BEGIN OF LINE.
    PARAMETERS: L2(84).
    SELECTION-SCREEN END OF LINE.SELECTION-SCREEN BEGIN OF LINE.
    PARAMETERS: L3(84).
    SELECTION-SCREEN END OF LINE.SELECTION-SCREEN BEGIN OF LINE.
    PARAMETERS: L4(84).
    SELECTION-SCREEN END OF LINE.SELECTION-SCREEN BEGIN OF LINE.
    PARAMETERS: L5(84).
    SELECTION-SCREEN END OF LINE.SELECTION-SCREEN BEGIN OF LINE.
    PARAMETERS: L6(84).
    SELECTION-SCREEN END OF LINE.SELECTION-SCREEN BEGIN OF LINE.
    PARAMETERS: L7(84).
    SELECTION-SCREEN END OF LINE.SELECTION-SCREEN BEGIN OF LINE.
    PARAMETERS: L8(84).
    SELECTION-SCREEN END OF LINE.SELECTION-SCREEN BEGIN OF LINE.
    PARAMETERS: L9(84).
    SELECTION-SCREEN END OF LINE.
    EMAIL_TEXT-LINE = L1.
    APPEND EMAIL_TEXT.
    EMAIL_TEXT-LINE = L2.
    APPEND EMAIL_TEXT.
    EMAIL_TEXT-LINE = L3.
    APPEND EMAIL_TEXT.
    EMAIL_TEXT-LINE = L4.
    APPEND EMAIL_TEXT.
    EMAIL_TEXT-LINE = L5.
    APPEND EMAIL_TEXT.
    EMAIL_TEXT-LINE = L6.
    APPEND EMAIL_TEXT.
    EMAIL_TEXT-LINE = L7.
    APPEND EMAIL_TEXT.
    EMAIL_TEXT-LINE = L8.
    APPEND EMAIL_TEXT.
    EMAIL_TEXT-LINE = L9.
    APPEND EMAIL_TEXT.
    EMAIL_DATA-OBJ_NAME = 'MESSAGE'.
    EMAIL_DATA-OBJ_DESCR = SUBJECT.
    EMAIL_DATA-OBJ_LANGU = 'E'.
    EMAIL_DATA-SENSITIVTY = 'P'.
    EMAIL_DATA-OBJ_PRIO =  '1'.
    EMAIL_DATA-NO_CHANGE = 'X'.
    EMAIL_DATA-PRIORITY = '1'.
    BREAK-POINT.
    IF SELECT__ = 'X'.
      LOOP AT SEND_TO.
        EMAIL_SEND-RECEIVER = SEND_TO-LOW.
        EMAIL_SEND-REC_TYPE = 'U'.
        EMAIL_SEND-EXPRESS = 'X'.
        APPEND EMAIL_SEND.
      ENDLOOP.
    ELSEIF THIS_CLI = 'X'.
      SELECT * FROM USR02.
        IF USR02-USTYP = 'A' AND USR02-BNAME NE 'SAP*'
        AND USR02-BNAME NE 'DDIC'.
          EMAIL_SEND-RECEIVER = USR02-BNAME.
          EMAIL_SEND-REC_TYPE = 'U'.
          EMAIL_SEND-EXPRESS = 'X'.
          APPEND EMAIL_SEND.
        ENDIF.
      ENDSELECT.
    ELSEIF ALL__CLI = 'X'.
      SELECT * FROM USR02 CLIENT SPECIFIED.
        IF USR02-USTYP = 'A' AND USR02-BNAME NE 'SAP*'
        AND USR02-BNAME NE 'DDIC'.
          EMAIL_SEND-RECEIVER = USR02-BNAME.
          EMAIL_SEND-REC_TYPE = 'U'.
          EMAIL_SEND-EXPRESS = 'X'.
          APPEND EMAIL_SEND.
        ENDIF.
      ENDSELECT.
    ENDIF.
    BREAK-POINT.
    EXIT.
    CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
         EXPORTING
              DOCUMENT_DATA              = EMAIL_DATA
              DOCUMENT_TYPE              = 'RAW'
              PUT_IN_OUTBOX              = 'X'
         IMPORTING
              SENT_TO_ALL                = SENT
              NEW_OBJECT_ID              = EMAIL_ID
         TABLES
              OBJECT_CONTENT             = EMAIL_TEXT
              RECEIVERS                  = EMAIL_SEND
         EXCEPTIONS
              TOO_MANY_RECEIVERS         = 1
              DOCUMENT_NOT_SENT          = 2
              DOCUMENT_TYPE_NOT_EXIST    = 3
              OPERATION_NO_AUTHORIZATION = 4
              PARAMETER_ERROR            = 5
              X_ERROR                    = 6
              ENQUEUE_ERROR              = 7
              OTHERS                     = 8.
    regs
    Arun

  • HT5312 When i send the email to reset sequrity questions, why won't it send the email?

    when i send the email for the security questions for answers it never sneds the email. tried it multiple times and still wont send it. I have $15 on my account and are not happy i cannot use it

    Alternatives for Help Resetting Security Questions and Rescue Mail
         1. Apple ID- All about Apple ID security questions.
         2. Rescue email address and how to reset Apple ID security questions
         3. Apple ID- Contacting Apple for help with Apple ID account security.
         4. Fill out and submit this form. Select the topic, Account Security.
         5.  Call Apple Customer Service: Contacting Apple for support in your
              country and ask to speak to Account Security.
    How to Manage your Apple ID: Manage My Apple ID

  • Ask for security question but they send the email to my other second account ! Not the same email which i logon it

    I had a weird problem i have two id apple account one of them i forget the security question i try to ask for reset but when i login to first email and ask for reset they send the email to other email which is in other account !! I need it to send to the same email which i login through it i do not know how they know the other email is my second email
    Now i can not reset my security question because they send it to other email which has been hacked !!        

    Alternatives for Help Resetting Security Questions and/or Rescue Mail
         1. If you have a valid rescue email address, then use this procedure:
             Rescue email address and how to reset Apple ID security questions.
         2. Fill out and submit this form. Select the topic, Account Security. You must
             have a Rescue Email to use this option.
         3. This is the only option if you do not already have a valid Rescue Email.
             These are telephone numbers for contacting Apple Support in your country.
             Apple ID- Contacting Apple for help with Apple ID account security. Select
             the appropriate country and call. Ask to speak to the Account Security Team.
         4. Account security issues almost always require you to speak directly to an
             Apple representative to securely establish your identity as the account holder.
             You can set it up so that Apple calls you, either immediately or at a time
             convenient to you.
                1. Go to www.apple.com/support.
                2. Choose Contact Support and click Contact Us.
                3. Choose Other Apple ID Topics and choose the appropriate topic for
                    your issue.
                4. Follow the onscreen instructions.
             Note: If you have already forgotten your security questions, then you cannot
             set up a rescue email address in order to reset them. You must set up
             the rescue email address beforehand.
    Your Apple ID: Manage My Apple ID.
                            Apple ID- All about Apple ID security questions.

  • Error while sending the email notifcation

    Hi All
    I am getting this error while sending the email notifcation.If any one of you have any idea regarding this please suggest
    [2012-09-12T03:55:41.288-10:00] [soa_server1] [ERROR] [SDP-26102] [oracle.sdp.messaging.driver.email] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: OracleSystemUser] [ecid: f5c1f5acbf0bb7a6:22e05768:139ba096e4d:-8000-00000000000006ef,0] [APP: usermessagingdriver-email] Error while writing e-mail message content.[[
    java.lang.ArrayIndexOutOfBoundsException: 0 >= 0
         at java.util.Vector.elementAt(Vector.java:427)
         at javax.mail.Multipart.getBodyPart(Multipart.java:157)
         at javax.mail.internet.MimeMultipart.getBodyPart(MimeMultipart.java:256)
         at oracle.sdpinternal.messaging.driver.email.EmailDriver.getHeaderEncoding(EmailDriver.java:1079)
         at oracle.sdpinternal.messaging.driver.email.EmailDriver.send(EmailDriver.java:670)
         at oracle.sdpinternal.messaging.driver.email.EmailManagedConnection.send(EmailManagedConnection.java:50)
         at oracle.sdpinternal.messaging.driver.DriverConnectionImpl.send(DriverConnectionImpl.java:41)
         at oracle.sdpinternal.messaging.dispatcher.DriverDispatcherBean.onMessage(DriverDispatcherBean.java:296)
         at sun.reflect.GeneratedMethodAccessor2553.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
         at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
         at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
         at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
         at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
         at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
         at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
         at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
         at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
         at $Proxy346.onMessage(Unknown Source)
         at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:574)
         at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:477)
         at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:379)
         at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)
         at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)
         at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3821)
         at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
         at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5170)
         at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    [2012-09-12T03:55:41.331-10:00] [soa_server1] [WARNING] [SDP-25107] [oracle.sdp.messaging.engine.store] [tid: [ACTIVE].ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: OracleSystemUser] [ecid: f5c1f5acbf0bb7a6:22e05768:139ba096e4d:-8000-00000000000006ef,0] [APP: usermessagingserver] Message ID bac38bd50a1f32a129c5c739335a7855 in Status object does not match previously recorded Message ID b7e259a30a1f32a12c981a3ffd343f6d.
    [2012-09-12T03:55:41.362-10:00] [soa_server1] [ERROR] [] [oracle.soa.services.notification] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@3066bad4] [userId: <anonymous>] [ecid: 0000Jau4qHj9Lex_w9w0yW1GK6Rn000003,1:32530] [APP: soa-infra] <.> Error status received from UMS.[[
    Status detail :
         Status type : DELIVERY_TO_GATEWAY:FAILURE,
         Status Content : Failed to set message headers: java.lang.ArrayIndexOutOfBoundsException: 0 >= 0,
         Addressed to : EMAIL:[email protected],
         UMS Driver : Farm_base_domain/base_domain/soa_server1/usermessagingdriver-email:oracle_sdpmessagingdriver_email#Email-Driver,
         UMS Message Id : b7e259a30a1f32a12c981a3ffd343f6d,
         Gateway message Id : ,
         Status Received at : Wed Sep 12 03:55:41 HST 2012.
    Check status details and fix the underlying reason, which caused error.
    [2012-09-12T03:55:51.492-10:00] [soa_server1] [WARNING] [] [oracle.soa.services.notification] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@3066bad4] [userId: <anonymous>] [ecid: 0000Jau4qHj9Lex_w9w0yW1GK6Rn000003,1:32530] [APP: soa-infra] <.> Could not find notification record corresponding to failed notification : (Channel message id) : b7e259a30a1f32a12c981a3ffd343f6d[[
    Hence it will not be retried.
    Possible cause could be purging of notification data after sending out notification, but before receiving status.
    ]]

    Are you using your email address to send the email notifications if it Is not configured with AD? Have you populated the mail attribute in weblogic console-->realms-->my realms-->users
    In addition are you sure you have configured the 'Email Driver Properties' correctly in EM ?? have you specified the Notification Mode to Email ?
    Please make sure that the outgoing mail server and port along with the username and password are correct.
    Also validate the workflow settings in your EM?
    In addition, please validate that when you logon to BPM worklist using the admin account and click on the name for e.g. weblogic, you see the email attribute populated properly.
    Thanks
    ACM

  • Issue in sending the email with XL attachment in ECC version

    Hi,
    I have an issue with sending the email with XL attachment. My program is sending a mail to the receiver with XLS as attachment. Recently we have migrated from 4.6B to ECC version. Same code was worked in 4.6B.But it is not working in ECC version.When i try to open the attachment, i get a Dialog Box with the following message
    "The file is not in a recognizable format.
    1. if you know the file is from another program whih is incompatible with Microsoft excel,click cancel,then open this file in its original application
    2.If you suspect the file is damaged, click help for more information about solving theproblem.
    3.if you still want to see what text is contained in the file, click OK.Then click the text import wizard. "
    when i click OK, the excel sheet is opening with all required data.
    Can anyone kindly tell me why this is happening.
    I am also attaching part of the coding related to this requirement.
    *&      Form  BUILD_XLS_DATA_TABLE
          text
    -->  p1        text
    <--  p2        text
    FORM build_xls_data_table.
      DATA: w_total(13),
      w_clabs(13),
      w_cinsm(13),
      w_ceinm(13),
      w_cretm(13),
      w_cspem(13),
      w_cumlm(13),
      w_exp_date(8),
      w_v_totalp(13),
      w_min_rem(8),
      w_ersda(10),
      w_hsdat(10),
      w_vfdat(10),
      w_ship_date(10),
      w_plnmg(13),
       w_mhdrz(4).
      CLEAR: w_total, w_clabs, w_cinsm, w_ceinm, w_cspem, w_exp_date,
      w_v_totalp, w_min_rem, w_ersda, w_hsdat, w_vfdat, w_ship_date,
      w_plnmg, w_mhdrz.
      w_total = it_batch1-total.
      w_clabs = it_batch1-clabs.
      w_cinsm = it_batch1-cinsm.
      w_ceinm = it_batch1-ceinm.
      w_cspem = it_batch1-cspem.
      w_cumlm = it_batch1-cumlm.
      w_cretm = it_batch1-cretm.
      w_exp_date = it_batch1-exp_date.
      w_v_totalp = it_batch1-v_totalp.
      w_min_rem = it_batch1-min_rem.
      w_plnmg = it_batch1-plnmg.
      w_mhdrz = it_batch1-mhdrz.
      CONCATENATE it_batch1-ersda6(2) it_batch1-ersda4(2)
                  it_batch1-ersda+0(4) INTO w_ersda SEPARATED BY '.'.
      CONCATENATE it_batch1-hsdat6(2) it_batch1-hsdat4(2)
                  it_batch1-hsdat+0(4) INTO w_hsdat SEPARATED BY '.'.
      CONCATENATE it_batch1-vfdat6(2) it_batch1-vfdat4(2)
                  it_batch1-vfdat+0(4) INTO w_vfdat SEPARATED BY '.'.
      CONCATENATE it_batch1-ship_date6(2) it_batch1-ship_date4(2)
                  it_batch1-ship_date+0(4) INTO w_ship_date SEPARATED BY '.'
      CONCATENATE
      it_batch1-werks it_batch1-mtart it_batch1-matnr it_batch1-maktg
    it_batch1-prdha it_batch1-prctr it_batch1-ktext  it_batch1-dispo
      it_batch1-charg it_batch1-lgort it_batch1-herkl w_clabs
      w_cinsm w_ceinm w_cretm w_cspem
      w_cumlm w_total  it_batch1-meins  it_batch1-v_spr_unit
      w_v_totalp it_batch1-waers w_plnmg  it_batch1-meins
      w_ersda w_hsdat w_vfdat  w_exp_date
       w_ship_date  w_mhdrz  w_min_rem it_batch1-zlifer
       it_batch1-doknr it_batch1-dokar it_batch1-doktl  it_batch1-dokvr
               INTO L_STRING SEPARATED BY CON_TAB.
                  INTO l_string SEPARATED BY cl_abap_char_utilities=>horizontal_tab.
      WHILE l_string <> space.
        CALL FUNCTION 'TEXT_SPLIT'
          EXPORTING
            length       = 255
            text         = l_string
            as_character = 'X'
          IMPORTING
            line         = it_attach
            rest         = l_string.
        IF l_string = space.
       CONCATENATE IT_ATTACH CON_CRET INTO IT_ATTACH.
          CONCATENATE it_attach cl_abap_char_utilities=>cr_lf INTO it_attach.
          APPEND it_attach.
          CLEAR it_attach.
        ELSE.
          APPEND it_attach.
          CLEAR it_attach.
        ENDIF.
      ENDWHILE.
    move l_string to it_attach .
    CONCATENATE it_attach cl_abap_char_utilities=>cr_lf INTO it_attach.
    APPEND it_attach.
    CLEAR it_attach.
    ENDFORM.                    " BUILD_XLS_DATA_TABLE
    *&      Form  SEND_FILE_AS_EMAIL_ATTACHMENT
          text
    -->  p1        text
    <--  p2        text
    FORM send_file_as_email_attachment.
      DATA:w_length TYPE i.
      DATA:  w_cnt TYPE i,
              w_sent_all(1) TYPE c,
              w_doc_data LIKE sodocchgi1,
              gd_error    TYPE sy-subrc,
              gd_reciever TYPE sy-subrc,
              t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE.
    Fill the document data.
      w_doc_data-doc_size = 1.
    Populate the subject/generic message attributes
    w_doc_data-obj_langu = sy-langu.
    w_doc_data-obj_name  = 'SAPRPT'.
    w_doc_data-obj_descr = text-034 .
    w_doc_data-sensitivty = 'F'.
    Fill the document data and get size of attachment
      CLEAR w_doc_data.
    DESCRIBE TABLE it_attach LINES w_cnt.
      DESCRIBE TABLE it_message LINES w_cnt.
      READ TABLE it_message INDEX w_cnt.
    w_length = STRLEN( it_attach ).
      w_doc_data-doc_size =
         ( w_cnt - 1 ) * 255 + STRLEN( it_message ).
      w_doc_data-obj_langu  = sy-langu.
    w_doc_data-obj_name   = 'SAPRPT'.
      w_doc_data-obj_descr  = text-034.
      w_doc_data-sensitivty = 'F'.
      CLEAR t_attachment.
      REFRESH t_attachment.
      t_attachment[] = it_attach[].
    describe the body of the message
      CLEAR t_packing_list.
      REFRESH t_packing_list.
      t_packing_list-transf_bin = space.
      t_packing_list-head_start = 1.
      t_packing_list-head_num = 0.
      t_packing_list-body_start = 1.
    ***Start of changes by 501507008 on 29.01.2009
      t_packing_list-obj_descr  = 'MAIL BODY'.
    ***End of changes by 501507008 on 29.01.2009
      DESCRIBE TABLE it_message LINES t_packing_list-body_num.
      t_packing_list-doc_type = 'RAW'.
      APPEND t_packing_list.
    Create attachment notification
      t_packing_list-transf_bin = 'X'.
      t_packing_list-head_start = 1.
      t_packing_list-head_num   = 1.
      t_packing_list-body_start = 1.
      DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
      t_packing_list-doc_type   =  'XLS'.
      t_packing_list-obj_descr  =  text-034.
      t_packing_list-obj_name   =  'filename'.
      t_packing_list-doc_size   =  t_packing_list-body_num * 255.
      APPEND t_packing_list.
    Add the recipients email address
      CLEAR t_receivers.
      REFRESH t_receivers.
      LOOP AT it_adr6.
        t_receivers-receiver = it_adr6-smtp_addr.
        t_receivers-rec_type = 'U'.
        t_receivers-com_type = 'INT'.
        t_receivers-notif_del = 'X'.
        t_receivers-notif_ndel = 'X'.
        APPEND t_receivers.
      ENDLOOP.
    CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
       EXPORTING
         document_data              = w_doc_data
         put_in_outbox              = 'X'
         sender_address             = ' '
         sender_address_type        = ' '
         commit_work                = 'X'
       IMPORTING
         sent_to_all                = w_sent_all
       TABLES
         packing_list               = t_packing_list
         contents_bin               = t_attachment
         contents_txt               = it_message
         receivers                  = t_receivers
       EXCEPTIONS
         too_many_receivers         = 1
         document_not_sent          = 2
         document_type_not_exist    = 3
         operation_no_authorization = 4
         parameter_error            = 5
         x_error                    = 6
         enqueue_error              = 7
         OTHERS                     = 8.
      CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
        EXPORTING
          document_data                    = w_doc_data
         put_in_outbox                    = 'X'
      commit_work                      = ' '
    IMPORTING
      sent_to_all                      =
      new_object_id                    =
    tables
            packing_list               = t_packing_list
            contents_bin               = t_attachment
            contents_txt               = it_message
            receivers                  = t_receivers
      contents_hex                     =
      object_para                      =
      object_parb                      =
       exceptions
         too_many_receivers               = 1
         document_not_sent                = 2
         document_type_not_exist          = 3
         operation_no_authorization       = 4
       parameter_error                  = 5
       x_error                          = 6
       enqueue_error                    = 7
       OTHERS                           = 8.
      IF sy-subrc <> 0.
      ENDIF.
    ENDFORM.                    " SEND_FILE_AS_EMAIL_ATTACHMENT

    Hi,
    could you tell me which opeion should i select in SCOT under INT node. I have tried with diffrent options. but no luck.
    SAPscript/Smart Forms  - No Conversion
    ABAP List                     - No Conversion
    Business Object/Link     - No Conversion
    RAW Text                     - No Conversion

  • To Send the Email to Ship to Party for Shipment Notification in SMARTFORMS

    HI Gurus,
    I am having a scenario to send the EMAIL  for Shipment Notification using SMARTFORMS when processed through VT01/VT02N transaction.
    I general process, the email is going to Forwarding agent Email address. But the user wants to send the notification to Ship to Party email address.
    Is there any IMG settings to be done or should we handle using Custom Driver program.? If yes, can anyone help how to achive this.
    Your help is greatly appreciated.
    Regards,
    Yathish

    Just take a look at this where PO is discussed but should not be different from your issue
    PO as SMART Form and mail as PDF
    Scheduling Agreement as PDF in email ?
    External Email (PDF Attachment) while PO is created or Changed
    Convert PO into PDF format and send by an email to vendor
    PDF form as email attachment for purchase order
    Send PO as email attachment
    How to convert smartform output to PDF and mailing them
    https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/8fd773b3-0301-0010-eabe-82149bcc292
    Regards,
    Ravi
    Note - Please mark all the helpful answers

  • HT201363 Every time I try to reset my security questions they send the email to an email account that is closed.  How do I change that?  I have other email addresses associated with my account and they always send it to the one that is closed...

    Every time I try to reset my security questiogns they send the email to an email account that has been closed for a couple of years.
    I do not understand why they can't send it to the other 3 email addresses that I have associated with my account.
    I have had an itunes account for so long that I don't ever giving any answers for security questions.   Help please.

    See Kappy's great User Tips.
    See my User Tip for some help: Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities https://discussions.apple.com/docs/DOC-4551
    Send Apple an email request for help at: Apple - Support - iTunes Store - Contact Us http://www.apple.com/emea/support/itunes/contact.html
    Call Apple Support in your country: Customer Service: Contacting Apple for support and service http://support.apple.com/kb/HE57
     Cheers, Tom

  • Is there a way to send the email notification as a PDF attachment and the email receipt as an email

    Has anyone found a way to send the email notification as a PDF attachment rather than email? I would still like to send the receipt as an email though? Any thoughts or experiences out there?

    Thanks for prompt response. Does this mean that there are future plans to do this?
    The forms received are used as part of a registration process into aonther system and aren't that User friendly in an email form. They have to be processed as received, so not efficiet to go in through the back end.

  • Sending the Email from SAP B One through SDK

    hello guys,
    i have an issue that,
    i have desinged the RFQ Screen through SDK, when i entered the data into the controls,when the user clicks on the Email button,
    the system has to send the email to the Specified  person in the screen.
    so please me  regarding this issue.
    thanks in advance.
    thanks & regards
    shiva shanker.
    [email protected]

    Couldnt you use the DI API Message service ?

  • My send email vi does not send the email out

    I am trying to send an email notification and using labview's example vi to send. In the server response everything looks great. It also says "Queued mail for delivery", but I dont' get any email back.
    I am sending the email to myself, and also tried sending to other people, but it just doesn;t work. Are there any issues with the server authenticity?

    Are you using the 'E-Mail Notification.vi' example? This example creates
    a return address based on the server response. Can you try replacing
    the generated return address with the email address you are sending to?
    Don't know for certain whether that will make a difference with your
    mail server. I think the servers we had trouble with were some flavor
    of microsoft; they bounced messages from [unknown user]@[mailserver].
    What mailserver?
    Matt

  • TS3899 When sending email from the Mail App or through other Apps, my default From: address will change when I enter a To: address.  This sometimes leads me to send the email from the wrong outgoing email account.  It is frustrating and poor design.

    When sending email from the Mail App or through other Apps on my iPad, my default From: address will change when I enter a To: address.  This sometimes leads me to send the email from the wrong outgoing email account.  It is frustrating and poor design, especially since I had already checked the From: address.
    iPad 4 running iOS 8.1.3

    3rd party email addresses have to be deleted on every synmced mac product, although I have 1and1.co.uk and my imac updatetes the mails in that account from mac mail.
    Yahoo etc is a 2 step deleting process but good to get your emails pushed when on the go.
    LJ
    http://www.facebook.com/The.Cowboy.Party

  • How to send the email to different email addresses from Workflow

    Hello,
    i an not getting that how to send the email from Workflow in SAP.
    plz give the steps to do that.
    i have done lots of time but system is not sending the email to different email address.

    Hi,
    lot of configuration is invloved in sending
    mail to external email id. check BASIS to
    configure for external mails ans also check
    debug FM and see which conditions exceptions
    (Document not sendis raised)
    also check below code
    CLEAR: DOC_CHNG, OBJTXT, OBJBIN, OBJPACK, OBJHEAD, RECLIST,
    RECIPIENT_INT, DOC_SIZE,TAB_LINES.
    REFRESH: OBJTXT, OBJBIN, OBJPACK, OBJHEAD, RECLIST.
    OBJBIN[] = CONTENT_OUT[].
    Populate e-mail title
    DOC_CHNG-OBJ_NAME = 'MAIL'.
    CONCATENATE 'EETS for Contract #'(245)
    OIA01_TAB-EXGNUM
    INTO DOC_CHNG-OBJ_DESCR SEPARATED BY SPACE.
    DESCRIBE TABLE OBJTXT LINES TAB_LINES.
    READ TABLE OBJTXT INDEX TAB_LINES.
    DOC_CHNG-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJTXT ).
    It is a text document
    CLEAR OBJPACK-TRANSF_BIN.
    The document needs no header (head_num = 0)
    OBJPACK-HEAD_START = 1.
    OBJPACK-HEAD_NUM = 0.
    but it has a body
    OBJPACK-BODY_START = 1.
    OBJPACK-BODY_NUM = TAB_LINES.
    of type RAW
    OBJPACK-DOC_TYPE = 'RAW'.
    APPEND OBJPACK.
    Create the attachment (the list itself)
    DESCRIBE TABLE OBJBIN LINES TAB_LINES.
    It is binary document
    OBJPACK-TRANSF_BIN = 'X'.
    we need no header
    OBJPACK-HEAD_START = 1.
    OBJPACK-HEAD_NUM = 0.
    but a body
    OBJPACK-BODY_START = 1.
    OBJPACK-BODY_NUM = TAB_LINES.
    of type PDF
    OBJPACK-DOC_TYPE = 'PDF'.
    OBJPACK-OBJ_NAME = 'Attachment'(239).
    CONCATENATE 'EETS_' OIA01_TAB-EXGNUM '_'
    IT_ZMMTACCUID-ACCTUSRID
    '_' SY-DATUM '_' SY-UZEIT '.PDF'
    INTO OBJPACK-OBJ_DESCR.
    READ TABLE OBJBIN INDEX TAB_LINES.
    DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJBIN ).
    OBJPACK-DOC_SIZE = DOC_SIZE.
    APPEND OBJPACK.
    Get e-mail address
    CLEAR IT_ADDRESS.
    READ TABLE IT_ADDRESS WITH KEY ACCTID = IT_ZMMTACCUID-ACCTUSRID
    BINARY SEARCH.
    IF SY-SUBRC = 0.
    RECIPIENT_INT-ADDRESS = IT_ADDRESS-SMTP_ADR.
    ENDIF.
    *Send email to external mail address
    RECLIST-RECEIVER = RECIPIENT_INT.
    RECLIST-REC_TYPE = 'U'.
    APPEND RECLIST.
    CLEAR RECLIST.
    *Send email to SAP Office mail address
    RECLIST-RECEIVER = IT_ZMMTACCUID-ACCTUSRID.
    RECLIST-REC_TYPE = 'B'.
    APPEND RECLIST.
    CLEAR RECLIST.
    SEND THE DOCUMENT BY CALLING THE SAPOFFICE API1 MODULE
    FOR SENDING DOCUMENTS WITH ATTACHMENTS
    call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    exporting
    document_data = doc_chng
    put_in_outbox = 'X'
    importing
    sent_to_all = sent_to_all
    tables
    packing_list = objpack
    object_header = objhead
    contents_bin = objbin
    contents_txt = objtxt
    receivers = reclist
    exceptions
    too_many_receivers = 1
    document_not_sent = 2
    operation_no_authorization = 4
    others = 99.
    also check
    https:/Re: mail sending problem
    Regards
    amole

Maybe you are looking for