Multiple Valid Addresses of a specific address type -- SD Customer

Hi Gurus -
My customer wants to add a new address type called "Job Site Address" (ZJ) which they want to attach to all customers. I believe this is standard functionality.
However, they have a situation where the customer could have many valid Job Site address at the same time. Does SAP allow maintaining many valid addresses of a specific address type? I did not think so but just wanted to reconfirm.
Thanks in advance for taking the time to answer this
Regards,
Pradhip.S

hi,
this is to inform you that,
SAP has provided name1/2/34 fields there in the place of address.
if that is not sufficient you can treat contact person total tab page for your ZJ that is site address.
or
this is a development, sit with abaper
say him to create a push button in the address tab page called ZJ for which addational tab page will be assigned to fill the site address.
hope this helps.
regards,
balaia

Similar Messages

Which address components country specific Address Cleanse Engine validates

Hi,
I am looking for a list of address components which are validated by a country specific Address Cleanse Engine.
Data Services Reference Guide does not go into such details.
I have a list of countries and need to identify if selected Address Cleanse Engine validates, for example, building number and unit number.
Thank You

Vlad,
The information you want is in DS Reference Guide, Data Quality Fields, Global Address Cleanse Fields, Output.
Paul

How to get mail address into a specific address group folder

I need to be able to copy an email address from Mail and when saving it into Address Book, have it automatically go into a specific folder.
Seems pretty obvious but I'm not seeing how to do this.
Or is my only option to save to Address Book then manually drag the address into the intended folder?
Thanks.

Mail will only add an address to the main Address Book list. You could write an Applescript to perform the operation or possibly an Automator script.

Spoof current MAC address to a known address to trick router and regis

I was not sure where to place this question in this forum, so if this is an incorrect placement place move it.
I have a problem where I want to connect a device to the internet, a Roku player, that has its own MAC address. The network that I currently have access to requires that I login using my information prior to being connected to the internet. The process is such that the first time you try to access a website you are forwarded to a "login" page where you enter this information.
The problem is that the Roku player does not have a browser in which I can use to do this step - so when I attempt to use the device it just sits. Even though I am connected to the internet, I do not have access to it through the router. So I was thinking that it may work if I used my laptop to spoof my MAC address to the specific address of my Roku player and login that way to register this device.
Would this work? If so, how could I go about doing it?

Wouldn't hurt to try. https://wiki.archlinux.org/index.php/MA … s_Spoofing

Cannot receive emails from specific addresses

I am not able to receive messages from a couple of specific senders, I can email them, they cannot respond or send a new email.
I am wondering if I accidentally bounced that email back as I have been having to bounce multiple spam lately and could have included an email from them. I tried to find a way to look at my bounced emails and cannot find - is there a way to look that up? And if so, can you reverse a bounce?
IMAC G5 Mac OS X (10.3.9)

You can't reverse bounced message.
Since spammers don't provide a valid sending or return email address, using the bounce feature on spam is a complete waste of your time.
When used on spam, all you get is a return email error message indicating the bounced message was not deliverable.
Some spammers use a valid email address from their "known good" email address list to appear as the sending email address for their garbage. Using the bounce feature on such a spam message will work but you are not sending the bounced message back to the spammer - it is going to some unsuspecting person who is not aware their email address is being improperly used by a spammer.
Bouncing a message sent from a legitimate source will not prevent receiving messages from the sender in the future. The only thing a bounced message does is indicate to the sender that your email address is not valid so hopefully the sender will not attempt to send you more messages in the future.
I am not able to receive messages from a couple of specific senders,
I can email them, they cannot respond or send a new email.
What exactly does they cannot respond or send a new email to you mean?
Do these senders successfully send you a message but receive a return email error message indicating the message was not deliverable or something else?
If the former, what does the return email error message indicate?

"" does not appear to be a valid email address. Verify the address and try again.

I am getting this error whenever I copy an email address from somewhere and paste it into the 'To' field.
“” does not appear to be a valid email address. Verify the address and try again.
Whattup with that?
Only way to get around it seems to be either typing the whole address in (uh!) or clicking on the email address and letting Mail create the new message. Both are not the way I need to do things and it used to work perfectly in Snow Leopard, as would be expected for such a basic sort of command.

I had the same problem with multiple adressess:
I used the " ; " as a seperator.
The message was sent with no trouble at all as soon as I used the " , " (comma) instead.
Hope this helps

Apple maps has received a poor performance rating just after introduction of the iPhone 5. I am running google maps app on the phone. Siri cannot seem to get me to a specific address. Where does the problem lie? Thanks.

Apple maps has received a poor performance rating just after introduction of the iPhone 5. I am running Google Maps app on the phone. SIRI cannot seem to get me to a specific address. Where does the problem lie? Also can anyone tell me the hierarchy of use between the Apple Maps, SIRI, and Google maps when the app is on the phone? How do you choose one over the other as the default map usage? Or better still how do you suppress SIRI from using the Apple maps app when requesting a "go to"?
I have placed an address location into the CONTACTS list and when I ask SIRI to "take me there" it found a TOTALLY different location in the metro area with the same street name. I have included the address, the quadrant, (NE) and the ZIP code into the CONTACTS list. As it turns out, no amount of canceling the trip or relocating the address in the CONTACTS list line would prevent SIRI from taking me to this bogus location. FINALLY I typed in Northeast for NE in the CONTACTS list (NE being the accepted method of defining the USPS location quadrant) , canceled the current map route and it finally found the correct address. This problem would normally not demand such a response from me to have it fixed but the address is one of a hospital in the center of town and this hospital HAS a branch location in a similar part of town (NOT the original address SIRI was trying to take me to). This screw up could be dangerous if not catastrophic to someone who was looking for a hospital location fast and did not know of these two similar locations. After all the whole POINT of directions is not just whimsical pasttime or convenience. In a pinch people need to rely on this function. OR, are my expectations set too high?
How does the iPhone select between one app or the other (Apple Maps or Gppgle Maps) as it relates to SIRI finding and showing a map route?
Why does SIRI return an address that is NOT the correct address nor is the returned location in the requested ZIP code?
Is there a known bug in the CONTACTS list that demands the USPS quadrant ID be spelled out, as opposed to abreviated, to permit SIRI to do its routing?
Thanks for any clarification on these matters.

siri will only use apple maps, this cannot be changed. you could try google voice in the google app.

Multiple IP adress on one mac address?

Hi!!
I have a WLC 2504 and AP 1602. Is it possible to give the client multiple ip addresses with one mac address. If yes, how it's made on WLC or AP?

In certain cases there is a need to have multiple IP addresses responding beyond a single client wireless association. For example, some video cameras will have an internal communication module that tied to wireless interface via ethernet. Some PoS devices may have similar requirement.
In WLC there is an option WLAN->WirelessID->Advanced->Passive Client.
Now I am not sure if this will work with multiple IP addresses tied to the same MAC or not.

How can I use multiple email-addresses with "Administration Email Address"

What syntax should I use to have more email-adresses in the screen "Manage Service - Instance Settings - Email" after the field "Administration Email Address".
I tried:
- '[email protected]','[email protected]'
- '[email protected], [email protected]'
- '[email protected]; [email protected]'
- "[email protected]','[email protected]"
- "[email protected], [email protected]"
- "[email protected]; [email protected]"
Every time I get the ORA-29279 / 501.
Please help me with the right syntax for multiple email-addresses.
Thanx!
reg.
Chris

From a google search of the docs, it looks that that field is used as a FROM address... hence it's by definition only one address.
Administration Email Address - Defines the "from" address for administrative tasks that generate email, such as approving a provision request or resetting a password.
From http://download.oracle.com/docs/cd/B28359_01/appdev.111/b32258/adm_wrkspc.htm
Edited by: Tanjental on Jun 29, 2009 6:28 AM

Forward email to a specific address to an Exchange mailbox

I would like to know if it is possible to forward email to a specific address (for an Identity that doesn't exist) to a user's mailbox.
Example: when our employees are terminated we delete their active directory accounts and email mailbox. I'd like to be able to still forward any email to their old email address to their supervisor.
Alternately I could set up the terminated employee as a mail contact: could I then set up the forwarding rule?

Hi,
Agree with the above suggestions, we can use transport rule:
The recipient is
Redirect the message to
For more information, you can refer to the followng articles:
Transport Rule Predicates:
http://technet.microsoft.com/en-us/library/dd638183(v=exchg.150).aspx
Transport Rule Actions:
http://technet.microsoft.com/en-us/library/aa998315(v=exchg.150).aspx
Thanks,
Angela Shi
TechNet Community Support

TS3276 Most attachments from a specific address (work) can not be opened, identified as winmail.data and no data available. Not sure if this is based on the e-mail coming from a windows based system, too old of a windows based system or simply how i have

Most attachments from a specific address (work) can not be opened, identified as winmail.data and no data available. Not sure if this is based on the e-mail coming from a windows based system, too old of a windows based system or simply how i have it set on my Mac.

Brightbleu wrote:
Most attachments from a specific address (work) can not be opened, identified as winmail.data and no data available. Not sure if this is based on the e-mail coming from a windows based system, too old of a windows based system or simply how i have it set on my Mac.
Winmail.data are not usable files. They just preserve RTF within the message.
http://support.microsoft.com/kb/278061
Cheers
Pete

TS3899 Mail not getting messages from specific address

I am consistently not receiving emails from a specific address in my Apple Mail inbox, but I have no filters enabled and the emails are not showing up in my spam and trash folders. If I follow directions for retrieving an email header in Gmail, I am able to see the email, but this doesn't correct the problem! This problem seems to have surfaced spontaneously. What is going on?

HI ,
have at look at this link :
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/step%252bby%252bstep%252bmail%252bto%252bfile%252bscenario
It contains the scenarios with "Mail to File Scenario using the Transport Protocol as IMP4 " as well as "Mail to File Scenario using the Transport Protocol as POP3".
Have a look at them.
Thanks,
Pooja

Using manual IP address only for specific networks

For my home network I use DHCP with manual address because I have to forward some ports specifically to my computer. However this causes problems when connecting to other networks. For some reason this setting stays active even when using other networks. Therefore, I can't connect to say my school network because the setting has to be set to plain DHCP. Is there a way to use manual IP address only for specific networks?

System Preferences > Network > Locations and add a location for your home with its manual settings. Add a location for other DHCP locations. Then when you want to connect at another DHCP location select that location from your locations dropdown.

Change value in specific address in hex file

Hi all : I have hex file that I want to change specific values in some specific address , how can I do that in labview Attach see file please for hex file Please see another attach file which explain what I want in steps Thanks a lot Wisam
Attachments:
Problem.doc ‏33 KB
TRXS-860.zip ‏32 KB

What you have is just a plain text file containing hexadecimal formatted text.
Do you know the offset of the data you need to change? Is the "address" a variable? Why don't you simply read your file as plain text, use search string to find ":1064F", then increment the location by the desired offset to get the locations you need to overwrite as described by smercurio.
How often does this need to happen? Is the file just 32k? For simplicity, you might just want to do the changes in memory and overwrite the entire file.
LabVIEW Champion . Do more with less code and in less time .

No address found for partner function type : 0002 and 0013

Hi Experts,
I have SRM PO and it is partially confirmed ,requester and Goods receipant has left the organisation, now another user trying to post the confirmation, getting the error :
No address found for partner function type : 0002
No address found for partner function type : 0013
We understood that requester and Goods receipant has left the organisation and this user is not there in organisation structure, hence we are getting the error.
Now we are trying to amend requester and goods receipant in the PO with new user(alreday there in the Orgn structure) but system is not allowing to do the same.
How can i post the confirmation now?? is ther any way to post the confirmation without amending the PO ?
Thanks in advance
Suresh.A

Hi
Please find the below steps
Step1:
Fetch the shopping baskets GUID using the table CRMD_ORDERADM_H.
Creator of shopping basket -CREATED_BY
Shopping basket no.: OBJECT_ID
Creation date: CREATED_AT
Fetch the shopping baskets GUID.
Step 2
Fetch the GUID of Alternative goods recipient:New User who would be doing Goods Receipt
Use the Function Module'HR_OBJECTBUPA_GETBUPA'
Use function module BBP_PD_SC_GETDETAIL input the shopping basket and GUID.
Fetch E_PARTNER-PARTNER_GUID's of Partner type 00000016 and 00000020.
Go to CRMD_PARTNER table for the above GUIDs replace the PARTNER_NO for 16 and 20
with PARTNER GUID of the alternative goods recipient.
Thanks
Trinath

Multiple Valid Addresses of a specific address type -- SD Customer

Similar Messages

Maybe you are looking for