Multiple values for one UDF

Is there a way to select multiple options from a drop down for a single UDF? For example, define 10 valid values for a UDF and allow the user to select all 10?

Hi Katie,
you can create a user-defined table and fill it over "tools/user-defined windows". You can choose these table in "tools/user-defined fields" for your topic. In form you can dropdown the filled values or defining a new value. I'll hope it will help.
Excuse me, it's not the right answer to your question.
regards Stephan
Edited by: Stephan Poller on Nov 27, 2008 11:40 AM

Similar Messages

Multiple Values For one Condition in Choose From List

I have used one Business Partner Choose From List in my form but i want to give condition in that choose from list on GroupCode .But the condition will have multiple values like 100,102,104 then how i will write the code to incorporate multiple values for one single condition.

Hi,
Check this thread
How to set a Multiple condition in a single CFL
Hope that helps,
Vasu Natari.

Multiple values for one variable?

I've created my first set of variables (using Form Properties>Variables), tweeked some XML sourcecode and they're working .
What I'm now trying to figure out is how to have one variable that has 2 values that pop up in 2 different text fields.
Simple form at this point:
Item, Model and Service Tag.
The user selects the item from the drop down list and the Service Tag field is autopopulated from the variables I set.
How do I get the Model to appear based on the Item selection?
I tried putting the two values for one variable together but both values appear in the same field.
Variable info that works: Scan (variable) = MC3090BT (value)
I also need this particular variable to = Handheld scanner (try to ignore the redundancy).
I attempted to make MC3090BT as it's own variable with Handheld scanner as it's value, and add to the code below but it didn't work.
Here's some of the code if it helps:
<event activity="change" name="event__change">
               <script contentType="application/x-javascript">if(xfa.event.newText == "Handheld scanner"){
    servicetag.rawValue = scan.value;
}else if(xfa.event.newText == "Latitude X1"){
    servicetag.rawValue = X1.value;

Hi, I am trying to do the same thing..passing multiple values to receiving query variable through RRI. Right now if I assign a query variable of type multiple single values it does not take any value. It works only if I assign variable of type Single Value.
In my assignment details the sender query has Generic for type and * for selection type.
If any one knows how to pass multiple values to receiving RRI query, please give the details.
Thanks

Create URL with multiple values for one parameter

Post Author: cbamberg
CA Forum: General
While I have no problems to create the URL to open a report with a single value for a parameter from my Java application, I don't know how to format multiple values for a parameter when I want to pass the "&prompt0=" value. The values I want to pass are numbers, not strings.
Anyone can help?

Hi gayatri,
you need to select both the product id and custname.put a count on the prodid column and write a condition of count>1 and apply it.
Thanks
Hari

Multiple values for one key in hashtable k, v

So, I know that java.util.hashtable (as of Java 1.5) uses separate chaining to handle collisions. What I want to know is how to get a certain value somewhere in that bucket if they all share a common key? Javadoc says I have to search it sequentially but doesn't say how.

OK, there's a lot of confusion on here for such a short thread :-)
Firstly, HashMaps pick which "bucket" to store your object in based on the hash value of your object (see Object.hashCode()). However, the actual object equality test (applied to the keys during a search) is based on Object.equals(). Therefore which bucket your object is in is irrelevant - the bucketting concept is just used as a way of quickly locating a subset of all the keys in the map which might match your search value. There could very well be just a single bucket in a map and it wouldn't change its logical behaviour.
This statement: "any Map including Hashtable, can only have a single (key,value) pair" is poorly worded. What it should say is that for any given key, a map can only hold a single value.
Really, you don't need to think about the internal structure of maps (i.e. buckets, etc.).
If you want to store multiple values for any given key, then make your value a list (java.util.List) and store your multiple real values inside that list.

Any way to pass Multiple Values for a single Label in the Parameter?

I have a Report that Contains 2 Parameters, @Customer & @Area. When trying to set up the Available Values for @Area, I'm having issues using multiple values for one Label, i.e. = "4006" Or "4610"
One of the Filters in the Report is an Operation number, which is the [OPERATION] field, which is setup as a filter on the Tablix referencing the @Area parameter.
PROBLEM: I cannot retrieve any data when trying to use the ‘Or’ Operator here. If I simply put “4006” or “4610” I retrieve data, but when trying to combine it returns no data.
Example, I need to allow a user to select ‘Chassis Incoming’, which would include data from Operations 4006 & 4610.
QUESTION:
Any way to pass Multiple Values for a single Label in the Parameter?
I realize the typical solution may be to use ‘Multi-Value’ selection, but in this case we want the User to select the Area and the multiple values for Filtering will be automatically determined for them. Otherwise, they are subject to not getting
it correct.
I have tried several different ways, such as =”4006” Or “4610”, =(“4006”, “4610”), = In(“4006”, “4610”), etc….
Note: We are using Report Builder 3.0

Based on my experience, there's no way to 'intercept' the query that gets passed back to SQL Server, so a Split wouldn't work.
Try creating either a function or stored procedure using the code below (compliments to
http://www.dotnetspider.com/resources/4680-Parse-comma-separated-string-SQL.aspx) to parse the string:
CREATE FUNCTION dbo.Parse(@Array VARCHAR(1000), @Separator VARCHAR(10))
RETURNS @ResultTable TABLE (ParseValue VARCHAR(100))AS
BEGIN
DECLARE @SeparatorPosition INT
DECLARE @ArrayValue VARCHAR(1000)
SET @Array = @Array + @Separator
WHILE PATINDEX('%' + @Separator + '%' , @Array) <> 0
BEGIN
SELECT @SeparatorPosition = PATINDEX('%' + @Separator + '%', @Array)
SELECT @ArrayValue = LEFT(@Array, @SeparatorPosition - 1)
INSERT @ResultTable VALUES (CAST(@ArrayValue AS VARCHAR))
SELECT @Array = STUFF(@Array, 1, @SeparatorPosition, '')
END
RETURN
END
Once created you can do things like this:
SELECT * FROM Parse('John,Bill,David,Thomas', ',')
SELECT * FROM (SELECT 'John' AS TestName union select 'David' AS TestName) AS Main
WHERE TestName IN (SELECT ParseValue FROM dbo.Parse('John,Bill,David,Thomas', ','))
This is what your SQL query would probably look like:
SELECT OperationID, OperationName FROM dbo.Operations
WHERE AreaID IN (SELECT ParseValue FROM dbo.Parse(@Area, ','))
You may need to fiddle around with the Separator depending on whether SQL Server inserts a space between the comma and next value.

Passing multiple values for a single field in URL to call sap Transaction

Hi All,
I need to pass multiple values for a single field to SAP transaction .
means if i have say a field "Date" which can contain more than one value, <b>but its not a range which has two fields</b> . How is it possible.
Let me know pls.
Regards,
Sirisha.R.S.

Hi Satyajit,
I need to call a transaction with multiple values which gives me the report based on those values.
So I need to pass multiple values for a single parameter.
I hope u got it.
Regards,
Sirisha.R.S.

Multiple choose for one parameter

Hi, does Oracle Report support the multiple choose for one parameter? i used a IN statement inside my WHERE conditions as following
Select ....
where ....
content.style IN (:p_style)
(content.style is a column in table "content", and "p_style" is a bind variable)
i want user can have multiple choises on p_style value. but in the parameter form i only can make one choise. Does any one know how to do the multi choise from parameter form? if you do, please help me. Thank you very much.
Li

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by whl:
Hi, does Oracle Report support the multiple choose for one parameter? i used a IN statement inside my WHERE conditions as following
Select ....
where ....
content.style IN (:p_style)
(content.style is a column in table "content", and "p_style" is a bind variable)
i want user can have multiple choises on p_style value. but in the parameter form i only can make one choise. Does any one know how to do the multi choise from parameter form? if you do, please help me. Thank you very much.
Li<HR></BLOCKQUOTE>
you can do that by flowing the stap
at first you will write a select statement
select ...
From ...
where Style (colomn name) = &style1
then you create a user parameter soupose wich name is P_style and which valus is x, y, and z you should enter another value soupose that name is 'All' (All means x + y + Z)
then you write in after parameter form trigger...
IF :P_style = 'All' then
:style1 := null;
Else :style1 := 'and style (style means your column name) = :P_style;
end if;
null

Multiple values for Time Characteristics (Ex: 0CALMONTH) in planning layout

Hello,
We are on BW - BPS 3.5v
We have a realtime infocube with only time characteristic 0CALMONTH.
There is a requirement that in my Planning layout I have to display the Keyfigures for:
(CURRENT MONTH) (CUMULATIVE 4 MONTHS FROM CURRENT MONTH) (CUMULATIVE 7 MONTHS FROM CUR MONTH)
I defined 3 exit variables on 0CALMONTH , one for Current Month, one for All 4 months from Current Month and another for All 7 months from Current Month.
In my planning layout when I use these variables for 0CALMONTH, I don't get the values for 4 months & 7 months.
I checked the variables are being populated with correct values. But when they get passed to the layout it doesn't read the Cube.
I got the basic doubt if we can give multiple values for the time characteristics in planning layout..??
Thanks for any suggestions.
Vish

Hi.
Did you created 3 restricted KF: one with KF amount and variable current month, second with amount and variable 4 monthes, third with amount and variable 7 monthes ?
Did you have match records in you cube ?
Regards.

Storing multipl values for meta data in DOCUMENT_META_DATA

Hi,
We currently have 3 content types in our system: news, announcements, and events.
They are currently stored in 3 different tables. We want to make this content
available via the various CM (select) and PZ tags (contentquery, contentselector).
I'd like to avoid writing my own doc provider (file:///D:/bea7/weblogic700/wlp/docs70/dev/conmgmt.htm#999019)
and instead would like to begin to publish document data directly to the reference
implementation tables (DOCUMENT and DOCUMENT_METADATA).
It seems like I should be able to do that with one exception. It doesn't seem
like we can store multiple values for meta data attributes. If you take the out
of the box p13n example, a lot of the data is tagged with 'genre' = Something
(i.e. Rock, Hip-hop, etc). Then content queries use this genre to personalize
pages.
What if I have a band that has multiple genres? What if I want to tag my band
as Rock and Hip-hop? And then also want that band to appear on both a Rock lovers
and a Hip hop groupies page? Is this possible with the default implementation?
I know when I tried entering multiple 'genre' meta data values for a same document
ID, it gave me a PK constraint violation. Any other trick around this?
Thanks,
Will Young
ps. using weblogic 7...

Yes Subler http://code.google.com/p/subler/ does support adding the HD tag.
On the Mac I wouldn't use anything but Subler for tagging, best UI, best metadata lookup, best underlying libraries for mp4 files (I'm biased on the libraries part).
Cheers Ed.

Multiple values for the Parameter

1. Had any tried the selecting MULTIPLE values for the parameter in Oracle Discoverer Plus Releae 4.1 Version 4.1.37.00.0. If so can please let me know how to implement it.
2. In a Page-Detail Cross Tab workbook, I have to show the weighted average instead of the avg or sum. Any inputs please.
3. I have to compare two periods (TOP) of datapoints. Any inputs please.

If you wanted to eliminate the need for users to type in the parameter values, you could create a LOV on the desired column. This will produce a distinct list of all valid values where the user would simply select as the wish. Of course you still need to check the "let user enter multiple values" checkbox if you want them to select more than one.
-DG

Multiple values for Commodity Code/Import code number for Foreign Trade

Hi Experts,
Is it possible to enter the multiple values for Commodity Code/Import code number for Foreign Trade field for plant/country specific data in transaction MM02 using any BADI/User Exit ? If yes, suggest the name of the BADI/User Exit
Thanks,
Narayan

how can one material in one plant have 2 commodity codes? This is not logical.

Multiple value in one column issue

Dear proffessionals,
i'm trying to put more than one value in one column, so i have next problem:
1. Query select cr_pjid from acc_users where username='ACCBTPS121' give result
CR_PJID
'26','63'2. Query select * from acc_accbtp_nova_view where ed_id=2 and to_char(pj_id) in ('26','63'); return 186 rows.
3. Query: select * from acc_accbtp_nova_view where ed_id=2 and
              to_char(pj_id) in (select cr_pjid
              from acc_users
              where username='ACCBTPS121'); doesn't return any row... :(
Could anyone help me ?
Thx in advance,
Adnan

After researching, I think that the best idea is to create another table with multiple rows and different values for one column...
[http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:210612357425|http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:210612357425]

Display multiple values for a characteristic for Equipment.

Hi is there any way to display multiple values for characteristics of an equipment. Ex. An equipment (Presss) produces multiple ROH Parts. The class VN_TOOl with charactersistic "Part Produced" . When I run IH08 and execute the query, >Show , hide classification I can only get just one part instead of multiple parts. How do I get multiple values for the characteristic

Yes Chandra,
You are not getting it in IH08, but you are getting it in IE07. See this.
IH08
IE07
If you want the report in the ALV layout, then you need to go for a development using FMs in Classification areas such as:
'BAPI_OBJCL_GETCLASSES' 'ALM_ME_CLASS_CHAR_GETDETAIL'
Jogeswara Rao K

Can you have multiple users for one account?

Can you have multiple users for one account? if so how do you set it up.
We are using it for our department and it would be great to see who created what form instead of it being all one name.

Each person should have their own account. You can easily share the forms with other people in your department. You will be able to see who the author of the form is.
More information on how to share :
http://forums.adobe.com/docs/DOC-2462
Information on how to copy a forms to a different account :
http://forums.adobe.com/docs/DOC-1390
Hope this helps
Gen

Multiple values for one UDF

Similar Messages

Maybe you are looking for