Multiple values of attributes for Transaction type Bid in the Org Plan

Hello All,
I need to have Multiple transaction types for the Object Bid Invitation in the Org Plan.
As the system is allowing only a single value,I tried maintaining the Table T77OMATTR by setting the attribute 'Tend_type' to take multiple values, but the whole attribute is set to not modifiable!
I am not sure whether I am doing the right thing
Can anybody advise on this please?
Regards,
Nagarajan

Hi
different transactions types, which can be selected in the transaction, are defined in SPRO via
IMG/Supplier Relationship Management/SRM Server/Cross-Application Settings/Define Transaction Types. There you can create new ones as well activate/deactivate transaction types.
The follow on document, PO or Contract, is defined per transaction type there as well.
When you want to influence the transaction type used from Sourcing Cockpit when clicking on "Bid Invitation", this can be accomplished via BADI only in SRM 5.0. Check the BADI section - don't know it by heart.
Cheers,
Claudia

Similar Messages

Organtisational data determination for transaction type

Hi!
We are implementing the organizational data determination.
The idea is to fix a specific org unit for several transaction types, because they will always use this unit.
In order to achieve this, we have implemented Org data determination with rule 14000146, Org. Unit Using Transaction Type.
Within the rule, in tab Container, I could assign 1 transaction type. How can I define more? And where do I determine the Org Unit it the rule should determine?
Best regards,
Cristina

hi Cristina
you need to enhance that rule
just copy the rule to Z rule and then create containers specifying the different transaction type in the same way the original transaction is there,
else you need not do this because it is the standard behavior of rule,for every transaction type u just assign the org data profile,it will work the way u want from this
and regarding ur question"where do I determine the Org Unit it the rule should determine"
the rule will automatically determine the org unit,because inside the container the org attributes are used, its like
IN PPOMA_CRM, choose your Organization Unit, Go to tab Attributes, Choose Attribute Maintaineance Scenario as SALES, and below you will be able to view Attribute Transaction Type.
i believe u r using rule for org model
best regards
ashish

LRM-00112: multiple values not allowed for parameter 'query'

Hello,
I am getting below error while trying to execute below query...please help:
exp username/password file=query.dmp log=query.log tables=schema_name.tablename query=\"where PRODUCT_KEY IN\'4541450,4541455,4541475,4541504,
4541505,4674142,4674201,4674202,4673982,4674000,4674114,4674118,4654432,4715806,4715807,4716122,4716133,4870247,5321008'/"
LRM-00112: multiple values not allowed for parameter 'query'
EXP-00019: failed to process parameters, type 'EXP HELP=Y' for help
EXP-00000: Export terminated unsuccessfully

yeah i have tried using paranthesis as well...it has given below error then:
exp schema/password file=query.dmp log=query.log tables=schema_name.table_name query="where PRODUCT_KEY IN (4541450,4541455,4541475,4541504,4
541505,4674142,4674201,4674202,4673982,4674000,4674114,4674118,4654432,4715806,4715807,4716122,4716133,4870247,5321008)"
./export.ksh: syntax error at line 1 : `(' unexpected

Copy Control for Transaction Types

Hi,
Was wondering if someone could help on following topic. We need to specify the possibility of copy control (follow-up) for certain transaction types in CRM 6.0. I've specified the source TT (ZAPP) and the target TT (ZCON) in customizing activity : Define Copying Control for Transaction Types.
ZAPP = Custom Appointment Activity
ZCON = Custom Opportunity
Now, when I want to create a follow-up for ZAPP in the WebUI (via dropdown 'More' and action 'Follow-Up'), I always get an extensive list of transaction types (about 30) rather than only the opportunity that I originally specified. Any ideas?
Thank you,
Sebastiaan.

Hi Kai,
Many thanks for your answer. Indeed, the COPY_DOCUMENT is a very good alternative as it also directs the flow for follow-up. However, I have a question in regards to using this method. I can see that there are parameters that need to be provided (like PROCESS_TYPE etc) but apart from that is it also possible to change fields in the copied document.
e.g. Currently the description of the copied document gathers the description of the action definition, but how can you pass the description of the previous document for instance? Is this also done via the actual parameters?
Thank you,
Sebastiaan.

The customizing navigation for transaction type 165

Hi All,
Could anyone show me the customizing navigation for transaction type 165?
Thanks a lot

Hi,
transaction AO73:
CU:
-> Asset Accounting
-> Transactions
-> Acquisitions
-> Define Transaction Types for Acquisitions
regards Bernhard

Available Assigment Blocks for Transaction Type(s)

Hi ,
How can I assign a Standard SAP Assigment Blocks for Transaction Type(s) ?
Example assign Available Assignment Blocks "Activity Journal" to Transaction Type 0010
Thank you .

Hello,
this can be acchieved by redefinition of method ON_NEW_FOCUS in the context note of the assignment block, like this
query = CL_CRM_BOL_DQUERY_SERVICE=>get_instance( 'BTQAct' ).
query->add_selection_param( iv_attr_name = 'BU_PARTNER'
                              iv_sign = 'I'
                              iv_option = 'CP'
                              iv_low = lv_bpno ).
query->add_selection_param( iv_attr_name = 'PROCESS_TYPE'
                              iv_sign = 'I'
                              iv_option = 'EQ'
                              iv_low = '0001' ).
Best regards
Manfred

How to use Z transaction type while in the Transaction launcher Wizard?

In SPRO->CRM->Transactions->Basic Settings->Define transaction Types I can see a whole host of Z transaction types.
These define all sorts of business transaction defaults. Within the Transaction launcher Wizard there is a Transaction Type that can be entered, but I can only see three options, being 'BOR Transaction', 'URL Transaction' and ' M', for some reason. None of the transaction types shown in the above SPRO path are displayed.
Does anyone know how I can use my Z transation type. These are used by the config behind the Action Boxes for the Winclient IC, but I can not get the Transaction launcher wizard to see or use these. The SAP How-to Guide to tha Transaction Launcher says that only BOR and URL Transactions can be used (unless you have IS-U). If this is true then how does one provide all the information provided by the Transaction type. The whole idea of the transaction type is default this information in one area.
Anyone.
Jason

I think it is possible.
In CRMC_UI_NBLINKS if you look at the logical links you can see that SRV-ORD-DC has a Parameter of 'SRVO' with a certain Parameter Class.
If you were to check SPRO->CRM->Transactions_Basic Settings->Transaction Types you will see that SRVO exists as an entry. This logical ink is therefore using this Transaction type to extract characteristics etc.
Having said that, I need to call the sales order create with a certain transaction type, so I copied SLS-SLO-CR to a Z copy, added the Parameter of 'Z111' and also used the Parameter class of CL_CRM_UIU_BT_PARAM_CREATE.
This should now, in theory all work, and show the exact same transaction in the Webclient IC as it does in the Winclient IC as they are both using the same Transaction type. However, the Webclient transaction looks different in terms of fields etc., so I don't think it's working. after all.
Jason

Time contraint for wage types which are the subtypes of the Infotypes.....

Dear Sap folks ,
Anybody can explain that "what is the role of "Time contraint"(Once / Sev.Times) for wage types which are the subtypes of the Infotypes like IT0015 and IT0014 (V_T512Z).
Thanks & Rgards
Maria Carlos Perera

Hi,
any wage type marked with once can be maintained only once for that specific period and several times means it can be there more than one time.
For example, IT0015 wage type XXXX has value once. You are booking this wage type on perticular day say 12.06.2011 then you cannot book same wage type XXXX on 12.06.2011. But you can book this on any oteher day of that month. if its several times then you can have several entries on same date.
Regards,
Poorvi.

Too many recipients found for message type ORDERS in the ALE model

Hi all ,
please help me to solve this issue .
i done with ale settings .
orders message type is used in 2 different model view for 2 different systems
when i create po it is giving error in output "Too many recipients found for message type ORDERS in the ALE model"
how can i rectify this error.
Thanks

> orders message type is used in 2 different model view for 2 different systems
do both of them carter diffrent needs or is it the same idoc which is being sent to diffrent systems?
if yes, then use a single model view with noth receiver systems defined in it.
if not, i would suggest, copying the standard idoc and create a zidoc and then use different ones for diffrent receivers....
or u can use diff versions of the orders message type...
say orders05 for one.... receiver and orders02 for another one....
hope this helps!!
Cheers!!
Sidharth

Multiple values in attribute BSA - 'Doc. Type in R3 system'

Dear Experts,
We use SRM7.0 with classic scenario.
We want to define different follow on document for each product group.
- We defined in "Define Objects in Backend System (Purch. Reqs, Reservations, Purch. Order)":
For category ID 1000 u2013 Always Purchase Requisition
For category ID 2000 u2013 PO if item data complete
- We also defined in org. management attributes (BSA) two kinds of 'Doc. Type in R3 system' u2013 one for PO and one for PR.
But we got error message.
If I define only 'Doc. Type in R3 system' for PO u2013 the system creates PO correctly.
If I define only 'Doc. Type in R3 system' for PR u2013 the system creates PR correctly.
If I define the two 'Doc. Type in R3 system' - we get error message.
Does it means that attribute 'Doc. Type in R3 system' cannot have multiple values ?
Thanks !
Lori

Hello Lori,
Please have a look at wiki below:
[Follow-on document determination (PR, PO,RS)|http://wiki.sdn.sap.com/wiki/display/SRM/Follow-ondocumentdetermination%28PR%2CPO%2CRS%29]
To get more details about transfer process of the Shopping Cart, see wiki below:
[Transfer process of the Shopping Cart|http://wiki.sdn.sap.com/wiki/display/SRM/TransferprocessoftheShopping+Cart]
Check also in BBP_DOC_CHANGE_BADI for Shopping Carts what is the value in field BE_DOC_TYPE at item level.
Regards.
Laurent.

How to main multiple attributes for set type R E W ARD_PRO_LOY using IDOC?

Hi,
I'm now trying to add the set type and attributes to my products existing in the CRM system. I decided to use LSMW and IDOC CRMXIF_PRODUCT_MATERIAL_SAVE to maintain the set type and attributes.
I successfully maintained the categories for the products and also assigned the set type. Now I need to add the attributes for this set type, where there are 3:
LMPRODUCT_TYPE
LOYPRODUCT_UNIT
LMPRODUCT_VALUE
But because in the IDOC structure only one attribute can be maintained at one time, how can I input all those 3 attributes together? Thanks a lot.

I tried to insert one data field first then update it by the second attributes, but then the system assigned two separated lines of data to my set type....

Change transaction type group for transaction type

Hi
Is it possible to change the transaction type group for a TTY.For ex i want to change for 270 and 151 -TTY GRP -32 and 33 respectively.As of now it is TTY grp is 25 and 10.I need to change this so that in Asset history sheet when i do ABT1N i want these values to be in field transfer and not in acquisition and retirement in respective company codes.
Where is TTY grp are set for TTY.Can it be modified.Please suggest.

For creating transaction type see the wiki.
In the transaction types you assign them!
For 151
SPRO:
Financial Accounting / Asset Accounting / Transactions / Acquisitions / Define Transaction Types for Acquisitions.
Assign there the asst hist group you need for this transaction type
For 270
SPRO:
Financial Accounting / Asset Accounting / Transactions / Retirements / Define Transaction Types for Retirements
Assign there the asst hist group you need for this transaction type

Transaction type to dispose the asset only for the depn areas 01 and 02

One of the Company codes XXXX plant XXXX has an isuue for asset # XXXXXXXXXX-0 this asset was partially retired in Nov.2008 and now its acquisition value is JPY312,428
which should not be an asset under US GAAP but qualify for asset under Tax book . So it needs be removed from US and JCC book(01 and 02 area) but keep the record on the Tax book(area 15).
Is there any transaction type to dispose this asset only for the 01 and 02 area but keep the historical data for 15 area?
Thanks for helping in advance

Can I suggest you a way to handle this? Just give a try and see whether it works for you or not.
Post a Credit entry to the Asset only to the area 01 and 02. Please follow the below steps before you do this.
1. Go to main SAP screen => System => User profile => Own data => Parameters
Add parameter ID FAA_FB01_AREA_SWITCH (Turn On Value Entry at Area Level for FB01) and mark "x" against it in Parameter value. Save this changes.
2. Go to F-02, Enter the Asset number (posting key 75 and transaction type 105, which ever you feel like) and then in the next screen, enter the amount. Here in this screen, you will find a tab named area values. Click that tab and change the values Area 01 & 02 to $0.01 and leave the Area 15 as it is. Enter the appropriate dr line item and save the document.
3.Go to AW01N and see tha values against each of the areas.
please revert in case you have any questions.

User exit for transaction type in FBB1

Hi All,
We have a requirement which allows the users to overwrite the transaction type and save it with different TType when they doing the entry manually via FBB1. For a particular account a transaction type is maintained in GGB1 say Z28. So for those accounts TType is automatically coming as Z28 even if we change that value also its not saving that, still showing Z28 only.
Can you please suggest how to implement the above requirement using User exit.
Thanks,
Spandana

Hi All,
We have a requirement which allows the users to overwrite the transaction type and save it with different TType when they doing the entry manually via FBB1. For a particular account a transaction type is maintained in GGB1 say Z28. So for those accounts TType is automatically coming as Z28 even if we change that value also its not saving that, still showing Z28 only.
Can you please suggest how to implement the above requirement using User exit.
Thanks,
Spandana

What is the transaction type to reduce the acquisition value

Hello all:
I use Transaction type 100 to acquire the asset for example 100 eur.
what is transaction type to do reduction for 20 eur for example for some interest expense.
BR,
Manthana

Hi
You want to reduce the Asset value then use the Transaction Type 105 or 160 based on the Year of Acquisition.
You can simply pass a manual entry Crediting this Asset and Debiting an AUC or Expense G/L Account.
1. 70 AUC Asset TTYPE(100) 20Eur
75 Asset (105/160) 20EUR
2. 40 ExpenseG/LA/C 20EUR
75 Asset (105/160) 20EUR
Regards
Venkat

Multiple values of attributes for Transaction type Bid in the Org Plan

Similar Messages

Maybe you are looking for