Multiple versions of forms

How do I modify an existing form so the original is maintained and additional versions are created?

When you're looking at your list of forms (My Forms tab), highlight the form and click the Duplicate button that's on the toolbar just to the left of the trashcan.

Similar Messages

Multiple versions of an application on one Forms Server

Is it possible to have multiple versions of an application available via one Forms Server?
We have a DEV, TEST and PROD version of an application and we would like to have the versions seperate on one Forms Server.
Would this be possible using any other Oracle tools (Portal)?
Thanks for your help.

Yes, all you have to do is create a batch file which sets the env variables you want and also starts up the forms listener on a different port. This way you can have a forms listener on e.g.
Port 9000 With Forms60_Path - c:\temp
Port 9001 With Forms60_Path - c:\Production
Port 9002 With Forms60_Path - c:\test
That way you will pick up different files as well.
Regards
Grant Ronald.

Multiple versions of labview on 1 computer

Hello,
I have just purchased LV 8.2 and am about to install it on my computer. The old version of LV I currently have on my computer is 7.1. Can I run both versions on the same computer or is it beneficial to take off LV 7.1 first before installing the new 8.2. Any opinions?
Azazal
Azazel
Pentium 4, 3.6GHz, 2 GB Ram, Labview 8.5, Windows XP, PXI-5122, PCI-6259, PCI-6115

Azazal,
You can certainly run both versions on the same computer. I have 6.1, 7.1, 8.0, and 8.20 installed on this machine and I regularly have more than one version open at the same time.
However, Paulo is very correct by saying that toolkits typically only install for one version of LabVIEW and that you need to be careful not to open your VIs in the wrong version of LabVIEW. If you were to open and save a LabVIEW 7.1 VI in 8.20 you would be unable to open it again in 7.1.
Matt, great links - I'm going to repeat that first one here in clickable form:
Installing Toolkits for Use with Multiple Versions of LabVIEW
Regards,
Simon H
Applications Engineer
National Instruments
http://www.ni.com/support

How can I create multiple versions of a video within the same project?

OK...this is a probably a very basic question but I'm not sure how to word it clearly.
How can I create multiple versions of a video within the same project? What I mean is that I have a bout 50 minutes of video and I want to make two DVDs using different clips from this original 50 minutes of footage. It would be a real pain to have to re-import the video AGAIN for the second DVD. I suppose I could drop anything I don't want to burn to DVD back into the clips pane but that would wipe out all my transitions wouldn't it? I want to save each project in their “raw” form so I can burn additional DVDs later otherwise I would just do them one at a time and not care about one of them being destroyed.
Wow...that was a mess. Does anyone understand what the heck I’m asking? I hope so.

How can I create multiple versions of a video within the same project?
You can't. You make separate projects using the same or different clips, segments, transitions, titles, etc. You can even duplicate the first project and then modify/make the desired changes in the duplicated project. Each project can then be burned as a different DVD or as different titles on the same DVD if there is enough room.

Jumpstart/JET - How to maintain multiple versions of patch clusters

Is there a way to maintain multiple versions of the recommended patch cluster with JET? Since Sun uses the same filename (10_recommended.zip) but releases several versions over time, its hard to keep new systems at the same baselines as ones built previously. So when I download a patch bundle I always rename it to the date downloaded (ie 10_Recommened_10SEPT2010.zip) Is there a way to integrate this into JET?
Thx,

when you are talking about versioing , starting form XI 3.1 SAP business objects released the BusinessObjects LifeCycle Manager for XI 3.1
find more details here
http://help.sap.com/businessobject/product_guides/boexir31/en/xi31_LCM_User_en.pdf
good luck
Amr

Multiple versions of help - Are areas the answer?

I have a scenario where we need to be able to have multiple products with multiple versions of that product's help file being published to RoboHelp Server. We are using RoboHelp 8 to publish to RoboHelp Server 8. I am happy with the concept of areas but do not want to have to get the developers to change the path to a new area each time there is a new product version. I want it to be seemless from the application. I am assuming that this would mean always publishing to the same area in which case I can not have multiple versions.
For example ProductA could have Version1 and Version2. By defining areas called PRODAV1 and PRODAV2 you could change the SSL properties in the project to point to the relevant area. However the server path would need to change to point to either the PRODAV1 or PRODAV2 area.
Has anyone else already done this and therefore has some advice to offer?
Read the RoboColum(n).

Hi Colum
Colum McAndrew wrote:
...do not want to have to get the developers to change the path to a new area each time there is a new product version....
It would seem to me that this would be a routine thing for developers. To code new help calls with new versions of the product.
I'm wondering if perhaps you could ease some of that by including a version number in the path. Bear in mind that I don't use RoboHelp Server, so maybe I'm tilting at windmills a bit here.
I was thinking if you published currently to \\server\product\startpage.htm that maybe you could change things so that you instead published to \\server\productA\startpage.htm. Then when productB comes along the path changes slightly to \\server\productB\startpage.htm.
That way everything would be in the same server, just in different folders. From the developer standpoint, they would only need to worry with coding a call to the correct product version folder.
Just thinking out loud a bit... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Can RDBMS Adapter run against multiple versions or Oracle?

We are currently running WLI 7.0 sp2 with Oracle 8.1.7 as the db.
We need to run an adapter against an Oracle 8.1.7 EIS as well as another Oracle
9.2 EIS. Is this possible?
Maybe a better way to put it is can WL have connection pools to multiple versions
of Oracle at the same time?
It seems to me like it would be a problem since the drivers are found inside the
classpath -- and how would it know which driver is the correct one for each version.
Jared

The answer is there in Metalink.
But since you asked your question so nicely... 8.1.7 is certified with Oracle9i Forms.
Regards,
Robin Zimmermann
Forms Product Management

Multiple versions on one computer?

Hi!
I am a new Macbook user that I bought to start developing Mac software.
I would like to use multiple versions of Mac OS X on my macbook if possible.
Can this be done so that I would have 10.3, 10.4 and 10.5 of Mac OS X installed and select the version on boot.
Thank you!

Just to build on what TP has mentioned... the reason for this is that older versions of OS X are never updated for newer hardware. As all Macs ship with the most current OS on them, there is never a need to update previous versions of the OS. There have been a number of significant hardware updates since 10.3 (I don't believe any version of 10.3 was ever released for the Intel Macs). If you had an older MacBook that came with 10.4, you could get away with installing both 10.4 (using the version it shipped with) and 10.5. If you have a more current MacBook, 10.5 is pretty much your only choice.

[Forum FAQ] Schedule multiple versions of System Image Backup in Windows 8.1

As we known that there is no UI for user to configure Image backup in Windows 8.1, this is a guide for your to schedule multiple versions of System Image Backup.
Step 1: Create a task to schedule an image backup with following command:
SCHTASKS /Create /SC WEEKLY /D MON /TN WeeklyFullBackup /RL HIGHEST /ST 13:00 /TR “wbAdmin Start Backup -backupTarget:F: -include:C: -allCritical -quiet”
Step 2: Schedule a robocopy to backup the saved image with BAT file:
Please create a new folder (in this example, the new folder is e:\test2) to save your multiple copies of image backup:
Write following batch file to copy backup and rename with backup date:
*****************BAT********************
@echo off
robocopy e:\test1\ e:\test2\ test.wim
ren e:\test2\test.wim test_%date:~10,4%%date:~7,2%%date:~4,2%_%time:~0,2%%time:~3,2%.wim
NOTE: e:\test2 is my location to save multiple copies of image backup; e:\test1 is the location I create the system image backup.
This BAT can also help to rename the copy of image backup with date and time like below:
3. Set up a basic task in Task schedule:
Note: please make sure the time you configured follows the time you set for image backup in Step 1.
Action -> Create basic task (Name you task) -> Trigger (Set how often this task should be run) -> Action (Start a program) -> Under Program/script, point to your bat file you create in Step 2.b -> Finish
At the end, you can know more about SCHTASKS and Robocopy via following links:
Robocopy
http://technet.microsoft.com/en-us/library/cc733145.aspx
Schtasks
http://technet.microsoft.com/en-us/library/cc725744.aspx
Welcome to your feedbacks.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Hi,
Thanks for posting in Microsoft TechNet forums.
I will try to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Regards,
Kelvin Xu
TechNet Community Support

Multiple Version Issue. data not matching

Dear all,
pleas help me in this issue..
we have the Apo (DP) Cube. we are running the reports on this cube..
when we run the query we are giving the Verion ( means week) in the selections.. data is coming but.not matching with Apo..data..
we assumed that data is coming more. beacuse it might taking the data of previous year also.
so we included the Calyear and aksed user to selct both, vesrion as well as year.. because their req is for multiple version with historical data.
They want to see the data for multiple versions with historical data... even though data is not matching..
what we had done is again deleting all the data from Cube and dso an datasource , again loading... this time we asked user to run the report and match it the data is matching.. with vesrion
But when we go for historical data with mutiple version. its not matching ,
pleas help me out where to find out this probelm , what could be the cause ,.
how to chek
Awaiting your valuble fedback. its an uregnt issue.
if any thing else required pls let me know

Txs for your valuble reply..
We had checked that .
but when we unload and again loaded data this time it is matching on giving the version...
Where as in case of Multiplr versions . data is coming more.. donno wheather it is mixing up the duplicate data . or what not able to underand.
can you pls tell me steps how to analyse with your patiency...
Where and all we need to chek ....
Awaiting Your reply.

Manage multiple versions(ID CS,CS2,CS3,CS4) of INDD files Indesign proxy for PC

Dear scripters,
I have multiple version of ID installed in my system. I have ID CS,CS2,CS3 and CS4. While I am opening (double click) the ID CS file, automatically the file opening in CS4. For solving this problem I have searched in the forums I found there is a program called INDESIGN PROXY for MAC OSX. It manages the problems well.
Now I am in the process of developing the application same like that for windows using VB. Here is my observation about Indesign proxy.
1. While user double clicks the Indesign file the argument is not passing to the Indesign.exe, but the argument passes to the Indesign proxy. Something like this
"C:\Program Files\Adobe\Adobe InDesign CS4\InDesign.exe" "%1"
to this
"C:\Program Files\IDproxy\proxy.exe" "%1"
2. The proxy exe lists all the version of IDs in a dialog box. If user selects CS2, the proxy exe passes the command argument something like this
"C:\Program Files\Adobe\Adobe InDesign CS2\InDesign.exe" "%1"
3. Now the file will open in correct version.
I am comfort with VB forums and coding but I am struck getting the file path while user double click's the file. I short need to get the file path of "%1" argument.
I think I am detailed.
Kindly advice me how can I proceed more?
Thanks
regards
a r u l
vpublish.net

I don't think it's a mistake.
"InDesign CS4 (3.0)"
means: this is the OM for InDesign 3.0 (i.e., InDesign CS) that is contained in InDesign CS4.
Wait -- do you mean there might be a difference between "the OM for InDesign 4.0 (i.e., InDesign CS2) that is contained in InDesign CS4" and, say, "OM for InDesign 4.0 (i.e., InDesign CS2) that is contained in InDesign CS5" ?
Why on earth would anyone need that? I imagine it's not because even with versioning the 'older' scripts may not behave the same -- there must be dozens of mails about versioning not working ... I mean, if Adobe knows what causes older scripts to stop working (because, if I understand you correctly, they retroactively change it in the documentation for older versions), wouldn't it be yet easier to not cause those changes?

Multiple versions on one box

Hi
Could someone help me with the below questions.
We have multiple MaxDB databases running on one box for EC and BW. There is a requirement to upgrade the BW database software, to do this do I have to upgrade the other databases on the box? Though my OS is Linux, I would also like to know the possibilities in windows environement.
If we can have multiple versions of databases on one box, are there any known problems. If the database version are different, how does the common services or executables work (eg:- I understand that there is only on XSERVER per box) and which folders are updated (is it only "database_dependent_path" or "independent_program_path" as well)?
Please advise
Thanks

Hi,
1. "Do I have to upgrade the other databases on the box?" -- It depends on your software and instance setup. If the multiple instances are installed under different directories. For e.g., the two instances 773 and 763 are installed under different directories on my PC:
> dbmcli db_enum
773     C:\sapdb\773\db                         7.7.03.16       fast    running
763     C:\sapdb\763\db                         7.6.03.06       fast    offline
> dbmcli inst_enum
7.7.03.16    C:\sapdb\773\db
7.6.03.06    C:\sapdb\763\db
If the EC and BW instances are installed under different directories, you can upgrade them independently of each other. This behavior is similar on all OS.
2. There are no known problems running multiple versions of databases on one box. When you update one instance, the database_dependent_path is updated. If the independent_program_path contains programs of an older version or build, it is updated as well.
Hope this helps,
Ashwath

Multiple versions of PSE on same computer.

Can multiple versions of PSE be installed and used on one computer, e.g. PSE5, PSE8, PSE11, and PSE 13. Will there be conflict or other kinds of problems? Are the different versions in any way connected or are they each entirely stand alone with "touching" each other? Or, another way of putting this is, do I have to uninstall prior versions of PSE before installing a newer version on the same computer? Thanks for any advice you can offer.

rgthoman a écrit:
Is this true of the organizer as well as the editor? If files are stored in the organizer of one version, are they readily accessible for editing in another version?
That has nothing to do with several versions. Files are NOT stored in the organizer. They are somewhere on your drive(s). If you have a single Elements version and several catalogs pointing to the same files on your drive(s), each catalog will be able to access the same files... until you move, rename or delete them from another catalog.

Multiple version of Java on one machine

Is it possible to have multiple versions of Java co-exist on the same XP Pro machine?
Here is our scenario: we have apps that use Java 1.5, but we have one critical app that doesn't support that version yet. It has to use the 1.4 version. Is there a way to allow both versions to exist and be usable for their respective apps? If so, how?
Thank you.

I can't, however it's never a good idea to have
multiple versions of Java on one machine. Try and
standardise if possible. If OP used JAVA_HOME as you
often suggest, then he would be knackered wouldn't
he? JAVA_HOME can only point to one JDK. Your
advice is conflicting kaj.Nope. JAVA_HOME should always be defined in the start script/file for a java application, so it's not set per system. It's very common that companies have applications that requires different JDK/JRE versions, and it's usually very expensive to upgrade all applications (if it's possible at all). You can of course also alter the PATH variable if you want to in the script.
/Kaj

Solaris 11 IPS: How do you post multiple versions of the same package?

How do you post multiple versions of the same software package on a single IPS instance(port)? Oracle was able to do it here with versions 151 and 175 of S11:
http://pkg.oracle.com/solaris/release/
Unfortunately, based on my searches, no where in the documentation (http://www.oracle.com/technetwork/server-storage/solaris11/technologies/ips-323421.html) does it explain to the development community how this is done. The best I can do is create pkg repo instances on different ports to host each different software version.
We are trying to deploy an IPS repository for our drivers and utilities that our customers can link to and pull updates from. We have been able to post a software package to the repository using the command:
pkgsend publish -s http://localhost:1234 -d ./ Appv1.p5m
This posts the package on the IPS repository instance at port 1234 on the server. However, we would like to post multiple versions of the package on the server at the same URL. Why the same URL? So that our customers and end-users need only point to a single URL to pull down our software rather than having to add a new URL to the publisher list each time we have an update. We want at least 5 of the previous software versions to be available on the server. Posting each version of the application or driver on a different IPS instance on a different port will require customers to add multiple URLs to their publisher list and they also will not be able to initiate remote scans for updates.
Has anybody been able to do this? Is any documentation forthcoming?
Edited by: user13489824 on Jun 25, 2012 10:17 AM

dhduvall: Thanks for your response. Yes, one would think that as long as the version numbers are different, you should be able to accumulate multiple versions of a package in a repository. It looks like Oracle has done it in their S11 repository unfortunately, as far as I know, they have not shared the steps on how to do this. I would like to publish two versions of the same package. I.E. two different manifests with two different fmri.pkg version strings and two different binaries.
If I publish one package after another like this:
pkgsend publish -s http://localhost:1234 Appv1.p5m
pkgsend publish -s http://localhost:1234 Appv2.p5m
Then only the second package shows up in the repository, as if it over-wrote the first one.
Running pkgsend with two manifest, like this:
pkgsend publish -s http://localhost:1234 Appv1.p5m Appv2.p5m
Will cause pkgsend to combine the packages and manifests as if they were a single package... not what I am trying to do.
Both approaches are complete without errors but neither achieves what I am trying to do.
alan.pae: Thank you. Unfortunately, the link didn't really help. I've read Oracle's white papers and IPS developer guide so I'm familiar with the topics covered.
Lex: Yes, I know. I specified the versions in the pkg.fmri value string.

Multiple versions of forms

Similar Messages

Maybe you are looking for