Multiple Versions reclassification with EC-CS

Hello gurus,
I am using 2 versions in my EC-CS solution:
- Normal Version 100 used for US GAAP,
- Add-on Version 200 is used for Local GAAP Adjustements (supplementary entries).
With this solution, US GAAP = Version 100 and Local GAAP = Versions 100 + 200.
At the end of my consolidation process I need to Reclassify entries for Local GAAP, do you know how I can apply a reclassifciation based on both 100 + 200 versions (I only manage to reclassify data based on a single version...)?
Thank you in advance for your help
Best regards
Pascal.

I've never done such a development in EC-CS.
However, I've done something similar in BCS and I do not consider it risky or difficult with the except for the time to develop and test. In BCS we populated a separate InfoCube with the calculated results and used a data collection/load from datastream task for posting the documents.

Similar Messages

Multiple versions of Photoshop ok? Conflicts? Hard drive space?

CS4 and CS5 Extended are currently installed on my computer, along with extensive number of third party plug-ins. I'm already encountering problems opening CS5 Extended--takes 2-3 tries before it actually opens; get "not responding" message first couple of times and have to force quit. Am concerned that purchase and installation of CS6 Extended will further complicate matters. Should I uninstall them before installing CS6 Extended? I currently have multiple Photoshop CS4 and 5 folders, etc in my Applications folder. Am thinking a clean-up is in order but thought I'd get advice before proceeding with CS6 purchase and attempt at clean-up. Also, if applicable, I have multiple Lightroom folders as well (2, 3, and 4) and am now having issues jumping over to Photoshop for additional editing from there. Thx

Yes, multiple versions mess with file associations. That's all it comes down to and pretty much the source of your troubles. Other than that there is no reason why one couldn't have multiple versions running, but feel free to consolidate and remove older versions....
Mylenium

HT5361 Why is that when I am composing a new message do I end up with multiple versions of my message I am composing up in my Google Trash mailbox? How can I stop this from happening?

Why is that when I am composing a new message do I end up with multiple versions of my message I am composing up in my Google Trash mailbox? How can I stop this from happening?

It was very hard to see what the box says because the message displays for less than one second. However, I was able to record it with my iphone and pause it until I got a shot of the message. The box says the following:
"Do you want the application “java” to accept incoming network connections?
Clicking deny may limit the application’s behavior. This setting can be changed in the Firewall pane of Security preferences."
I did make some changes. I will see if it works.
Thank you!!!

Problem with multiple versions of documents being published with 001, 002, etc.

I am using Contribute CS3. I am having a problem with multiple versions of documents being published on the sever with 001, 002, etc in the name. So that I end up with 2 or 3 versions of a document on the server. Does anyone know why / how Contribute is doing this? Thanks for any help you can give.

Your Web site administrator will need to update your key to allow you to delete files you are able to edit.

Same application showing multiple times (multiple versions?) in Open With menu

Hello, this has been bugging me for a while, and I hope someone has a clue as to why it is this way.
I know VLC is not Apple software, but my question is not about the player but the Open With menu/window.
As you can see in the photo, when I choose a file to Open With a series of applications, I get more "versions" of VLC I don't know why only VLC and not the others.
I have the 2.0.6 version if it can be of any help, and before my latest update I only had 3 in that menu, now I have 4 VLC's so to speak.
Even before that, before previous updates, I had 2 VLC's in the Open With menu.
It looks like with every update I get some sort of duplicate, in this menu...I don't know why and why only with VLC.
I do not have multiple copies of the program, nor multiple versions.
There is just one and that is the latest version, 'cause older ones get automatically replaced in the Applications folder once the new one is installed.
Why do I only see 1 VLC in the Applications folder, Launchpad, and anywhere else, but I see multiple ones in the Open With menu?
Anyone have an idea?
Should I delete something somewhere maybe leftovers of previous versions or something?
I don't want a huge list, at some point.
Thank you!

You need to rebuild your launch services database.
Open a terminal window (it's in utilities).
Copy and paste this line in terminal:
/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchSe rvices.framework/Versions/A/Support/lsregister -kill -r -domain local -domain system -domain user
and hit return.
Then relaunch Finder (control-option-click the Finder icon in the dock).

HT1349 How do I find where my multiple copies of Outlook are? (It said Multiple Outlook versions installed. You can't use iCloud when multiple versions of Outlook are installed. To use iCloud with outlook, uninstall one version.")

I have just started with iCloud, and run into a problem from my PC.
It says: "
Multiple Outlook versions installed.
You can't use iCloud when multiple versions of Outlook are
installed. To use iCloud with outlook, uninstall one version.
I have searched and found two versions of Outlook 2013 and 2015 (one of which was inactive, but I have removed it), and one of outlook.pst, which I have removed.
Where do I go from here?

That's a Windows/Office problem. You should ask in the Microsoft support forums.

Can not run multiple firefox windows with version 4

After the upgrade to FF4 the problem started happening. In ver 3 I used the profile manager and was able to run 2 firefox windows at the same time with no problems in Windows 7.
Now when I try to do this with version 4, one firefox window errors out with 'firefox stopped working'
I thought it was due to an incompatible add on or something, so I did a complete program removal, rebooted, cleaned the registry and removed all folders that firefox put on my system. The problem continues.

You can only run multiple version at the same time if the next version is started with the -no-remote switch added to the command line in the desktop shortcut.
"C:\Program Files\Mozilla Firefox XX\firefox.exe" -no-remote -P
* http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox

Adobe RUM with multiple versions of Creative Suite

I am having an issue when running RUM on computers with multiple versions of CS installed. The computers are OS 10.7.4 and have CS5, 5.5 and 6 installed. When I run the RemoteUpdateManager command, a get a return of 'There doesn't seem to be anything to update', even though there are a slew of CS6 updates that need to be installed. On computers with just CS6 installed, RUM behaves as it should.

Hi,
RUM works fine for CS5, CS5.5 and CS6 products. Can you please provide aamu.log, this will help us in nailing down the cause of this issue.
Logs can be located at
Win: C:\Users\labuser\AppData\Local\Adobe\AAMUpdater\1.0\aamu.log
Mac: /private/var/root/Library/Application Support/Adobe/AAMUpdater/1.0/aamu.log
In Mac, in order to access the root folder, give read permissions to '/private/var/root' folder and its enclosed items.
Please email me aamu.log and all the other content (Data folder, aamui.log, AdobeUpdaterPrefs.dat, CSUTracker.sig, CSUTracker.xml) present on above mentioned location.
You can email me at :[email protected]
Thanks,
Rahul | [email protected] | Adobe systems

Multiple versions on one computer?

Hi!
I am a new Macbook user that I bought to start developing Mac software.
I would like to use multiple versions of Mac OS X on my macbook if possible.
Can this be done so that I would have 10.3, 10.4 and 10.5 of Mac OS X installed and select the version on boot.
Thank you!

Just to build on what TP has mentioned... the reason for this is that older versions of OS X are never updated for newer hardware. As all Macs ship with the most current OS on them, there is never a need to update previous versions of the OS. There have been a number of significant hardware updates since 10.3 (I don't believe any version of 10.3 was ever released for the Intel Macs). If you had an older MacBook that came with 10.4, you could get away with installing both 10.4 (using the version it shipped with) and 10.5. If you have a more current MacBook, 10.5 is pretty much your only choice.

[Forum FAQ] Schedule multiple versions of System Image Backup in Windows 8.1

As we known that there is no UI for user to configure Image backup in Windows 8.1, this is a guide for your to schedule multiple versions of System Image Backup.
Step 1: Create a task to schedule an image backup with following command:
SCHTASKS /Create /SC WEEKLY /D MON /TN WeeklyFullBackup /RL HIGHEST /ST 13:00 /TR “wbAdmin Start Backup -backupTarget:F: -include:C: -allCritical -quiet”
Step 2: Schedule a robocopy to backup the saved image with BAT file:
Please create a new folder (in this example, the new folder is e:\test2) to save your multiple copies of image backup:
Write following batch file to copy backup and rename with backup date:
*****************BAT********************
@echo off
robocopy e:\test1\ e:\test2\ test.wim
ren e:\test2\test.wim test_%date:~10,4%%date:~7,2%%date:~4,2%_%time:~0,2%%time:~3,2%.wim
NOTE: e:\test2 is my location to save multiple copies of image backup; e:\test1 is the location I create the system image backup.
This BAT can also help to rename the copy of image backup with date and time like below:
3. Set up a basic task in Task schedule:
Note: please make sure the time you configured follows the time you set for image backup in Step 1.
Action -> Create basic task (Name you task) -> Trigger (Set how often this task should be run) -> Action (Start a program) -> Under Program/script, point to your bat file you create in Step 2.b -> Finish
At the end, you can know more about SCHTASKS and Robocopy via following links:
Robocopy
http://technet.microsoft.com/en-us/library/cc733145.aspx
Schtasks
http://technet.microsoft.com/en-us/library/cc725744.aspx
Welcome to your feedbacks.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Hi,
Thanks for posting in Microsoft TechNet forums.
I will try to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Regards,
Kelvin Xu
TechNet Community Support

Multiple Version Issue. data not matching

Dear all,
pleas help me in this issue..
we have the Apo (DP) Cube. we are running the reports on this cube..
when we run the query we are giving the Verion ( means week) in the selections.. data is coming but.not matching with Apo..data..
we assumed that data is coming more. beacuse it might taking the data of previous year also.
so we included the Calyear and aksed user to selct both, vesrion as well as year.. because their req is for multiple version with historical data.
They want to see the data for multiple versions with historical data... even though data is not matching..
what we had done is again deleting all the data from Cube and dso an datasource , again loading... this time we asked user to run the report and match it the data is matching.. with vesrion
But when we go for historical data with mutiple version. its not matching ,
pleas help me out where to find out this probelm , what could be the cause ,.
how to chek
Awaiting your valuble fedback. its an uregnt issue.
if any thing else required pls let me know

Txs for your valuble reply..
We had checked that .
but when we unload and again loaded data this time it is matching on giving the version...
Where as in case of Multiplr versions . data is coming more.. donno wheather it is mixing up the duplicate data . or what not able to underand.
can you pls tell me steps how to analyse with your patiency...
Where and all we need to chek ....
Awaiting Your reply.

Manage multiple versions(ID CS,CS2,CS3,CS4) of INDD files Indesign proxy for PC

Dear scripters,
I have multiple version of ID installed in my system. I have ID CS,CS2,CS3 and CS4. While I am opening (double click) the ID CS file, automatically the file opening in CS4. For solving this problem I have searched in the forums I found there is a program called INDESIGN PROXY for MAC OSX. It manages the problems well.
Now I am in the process of developing the application same like that for windows using VB. Here is my observation about Indesign proxy.
1. While user double clicks the Indesign file the argument is not passing to the Indesign.exe, but the argument passes to the Indesign proxy. Something like this
"C:\Program Files\Adobe\Adobe InDesign CS4\InDesign.exe" "%1"
to this
"C:\Program Files\IDproxy\proxy.exe" "%1"
2. The proxy exe lists all the version of IDs in a dialog box. If user selects CS2, the proxy exe passes the command argument something like this
"C:\Program Files\Adobe\Adobe InDesign CS2\InDesign.exe" "%1"
3. Now the file will open in correct version.
I am comfort with VB forums and coding but I am struck getting the file path while user double click's the file. I short need to get the file path of "%1" argument.
I think I am detailed.
Kindly advice me how can I proceed more?
Thanks
regards
a r u l
vpublish.net

I don't think it's a mistake.
"InDesign CS4 (3.0)"
means: this is the OM for InDesign 3.0 (i.e., InDesign CS) that is contained in InDesign CS4.
Wait -- do you mean there might be a difference between "the OM for InDesign 4.0 (i.e., InDesign CS2) that is contained in InDesign CS4" and, say, "OM for InDesign 4.0 (i.e., InDesign CS2) that is contained in InDesign CS5" ?
Why on earth would anyone need that? I imagine it's not because even with versioning the 'older' scripts may not behave the same -- there must be dozens of mails about versioning not working ... I mean, if Adobe knows what causes older scripts to stop working (because, if I understand you correctly, they retroactively change it in the documentation for older versions), wouldn't it be yet easier to not cause those changes?

Multiple versions on one box

Hi
Could someone help me with the below questions.
We have multiple MaxDB databases running on one box for EC and BW. There is a requirement to upgrade the BW database software, to do this do I have to upgrade the other databases on the box? Though my OS is Linux, I would also like to know the possibilities in windows environement.
If we can have multiple versions of databases on one box, are there any known problems. If the database version are different, how does the common services or executables work (eg:- I understand that there is only on XSERVER per box) and which folders are updated (is it only "database_dependent_path" or "independent_program_path" as well)?
Please advise
Thanks

Hi,
1. "Do I have to upgrade the other databases on the box?" -- It depends on your software and instance setup. If the multiple instances are installed under different directories. For e.g., the two instances 773 and 763 are installed under different directories on my PC:
> dbmcli db_enum
773     C:\sapdb\773\db                         7.7.03.16       fast    running
763     C:\sapdb\763\db                         7.6.03.06       fast    offline
> dbmcli inst_enum
7.7.03.16    C:\sapdb\773\db
7.6.03.06    C:\sapdb\763\db
If the EC and BW instances are installed under different directories, you can upgrade them independently of each other. This behavior is similar on all OS.
2. There are no known problems running multiple versions of databases on one box. When you update one instance, the database_dependent_path is updated. If the independent_program_path contains programs of an older version or build, it is updated as well.
Hope this helps,
Ashwath

Multiple versions of PSE on same computer.

Can multiple versions of PSE be installed and used on one computer, e.g. PSE5, PSE8, PSE11, and PSE 13. Will there be conflict or other kinds of problems? Are the different versions in any way connected or are they each entirely stand alone with "touching" each other? Or, another way of putting this is, do I have to uninstall prior versions of PSE before installing a newer version on the same computer? Thanks for any advice you can offer.

rgthoman a écrit:
Is this true of the organizer as well as the editor? If files are stored in the organizer of one version, are they readily accessible for editing in another version?
That has nothing to do with several versions. Files are NOT stored in the organizer. They are somewhere on your drive(s). If you have a single Elements version and several catalogs pointing to the same files on your drive(s), each catalog will be able to access the same files... until you move, rename or delete them from another catalog.

Multiple versions of labview on 1 computer

Hello,
I have just purchased LV 8.2 and am about to install it on my computer. The old version of LV I currently have on my computer is 7.1. Can I run both versions on the same computer or is it beneficial to take off LV 7.1 first before installing the new 8.2. Any opinions?
Azazal
Azazel
Pentium 4, 3.6GHz, 2 GB Ram, Labview 8.5, Windows XP, PXI-5122, PCI-6259, PCI-6115

Azazal,
You can certainly run both versions on the same computer. I have 6.1, 7.1, 8.0, and 8.20 installed on this machine and I regularly have more than one version open at the same time.
However, Paulo is very correct by saying that toolkits typically only install for one version of LabVIEW and that you need to be careful not to open your VIs in the wrong version of LabVIEW. If you were to open and save a LabVIEW 7.1 VI in 8.20 you would be unable to open it again in 7.1.
Matt, great links - I'm going to repeat that first one here in clickable form:
Installing Toolkits for Use with Multiple Versions of LabVIEW
Regards,
Simon H
Applications Engineer
National Instruments
http://www.ni.com/support

Multiple Versions reclassification with EC-CS

Similar Messages

Maybe you are looking for