Multiple views in a window

What is the use of adding multiple views to a window when only defaulted view will be shown to the user.

Hi Santosh,
This is used at the time of navigation from one view to another. For eg, if you need to navigate from a search result view to the overview page, then you have to assign both the views to the window. The search result view-set should be the default one. When the component is opened in web ui, by default it will load the Search Result view in the window. But as soon as you navigate from the result view by clicking on any link, to the overview page, the overview page is loaded in the same window. So multiple views are needed to be assigned.
Please let me know if you have any further doubts in this.
Regards,
Rachna

Similar Messages

  • Ability to view multiple files in ONE window

    I can see here that this is not a new topic really but the thing with Acrobat 9 is so frustrating that it is just unbelievable.
    This is another pearl:
    Acrobat 9 "lost" its predecessors ability to view multiple files in ONE window. After opening four only documents I cannot see anything on the screen because the toolbars on each individual window cover all necessary view and nothing is left for the actual document. And sometimes I need to open 20 documents!
    This is ABSOLUTE DISASTER!!!
    I found some explanations from Adobe on the Web that are more than a year old.
    I was sure that by now this unfortunate mishandling of that feature (apparently it was dropped out from A9 deliberately - WHO'S IDEA WAS THAT?) would be somehow restorable.
    Would anyone happen to know if this feature can get restored to how it was working in A7 or 8 (without the need to uninstall A9 and install A8)?

    No, it can't be restored, unless Adobe decides to change the way Acrobat works (which is possible, but not likely).
    By the way, it was Microsoft's idea... Adobe were just following their example on this.
    You can make a feature request here: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

  • How do I view multiple images in one window?

    How do I view multiple images in one window?  I want to compare images side by side, not in tabs.

    Thank you, Barbara.  I found that I had to close the program after I turned on "allow floating documents" and restart, before I was able to go to "float all in windows". 

  • Multiple terminal windows on multiple views in Subtle WM?

    Apologies if this has already been answered somewhere, but I couldn't find it.
    I'm using the Subtle WM, and I really love it's use of gravities and tags to position windows. The only problem I've run into is when I have multiple copies of the same program/window open, and want them placed on different views.
    If I have urxvt tagged to go to a particular view, then all of my urxvt terminal windows will open on that view. But I often like to have terminals open on different views for different purposes, depending on what I'm doing in that view.
    I tried tagging urxvt on multiple views, but that didn't work. Is there a way to accomplish this in Subtle?

    I've never used subtle, but I suspect it identifies client windows (for putting them on selected tags) by their resource name/class.  You can easily set these when you start urxvt (e.g. with the -name flag) so you can have different resource names for different urxvt windows.

  • Multiple views without instancing

    Ive seen the question asked about this. and it doesnt seem to
    be widely used. using multiple cameras diplaying multiple views of
    one scene, at one time, without having to use instances. why so
    many opt not to use it I dont know. when it should be used. on a
    very standard basis. for those that play the playstion or xbox
    systems. you have most likely seen a game where a second window
    opens up. You can do the the exact same thing in shockwave 3d. so
    why not use it. Say you have a character walking thru a house. and
    the camera is following that character. You can take a seperate
    camera, in a seperate part of the house. Showing another person
    coming from behind the first person in a second window displaying
    both windows at the same time. You can actually create mood and
    atmosphere. There isnt a single shot in movies or tv that cant be
    created in 3d and therefore shockwave 3d, be it split screens or
    not. So why not use it. This is like if all the people that use
    flash opt not to use flash video. when that is one of its strongest
    features. well here is a very simple example of it
    www.bleed3d.com/rotating%20cameras.htm

    quote:
    Originally posted by:
    tyree_2
    Im not referring to resources Im referring to visual delivery
    here is a very simple scene nothing special just a sphere but its
    interesting to look at
    But resources, in terms of manpower and funding is a huge
    factor which
    directly affects the end quality of the visuals. This is a
    lot of the reason that most commercial games require huge teams and
    huge amounts of funding. If we had double the time available (i.e.
    funding) and double the team size for our projects, we would be
    able to deliver much higher visual quality in terms of time spent
    modelling characters and levels, and time spent adjusting and
    improving visual routines.
    Incidentally, the demo you posted is actually quite boring to
    look at! Adding a second camera view of something that is already
    very dull doesn't make it significantly more interesting :-)
    quote:
    I also dont believe that the size of the plugin is really a
    problem. keep in mind people downloading movies and content in
    excess of 100 mb is the norm.
    If you read my post more carefully, you'll see that I said
    the plugin install "process", not the size. I agree with you that
    the size is not so much of an issue particularly now broadband is
    more widespread. But the number of dialogue boxes that must be
    click through, the 'age request', the toolbar option, the redirect
    to shockwave.com.... it's appalling and I am embarrassed when a
    client needs to see that, when we pitch a shockwave game to them.
    It's a
    major hinderance to selling shockwave work to clients.
    I
    really don't understand how you think adding a second camera
    view would inherently raise the 'standard' or make a project more
    entertaining. In almost all cases, unless it was for some specific
    purpose that was relevant to the project, I think the user would
    think, "what's that extra camera view for?".
    - Ben

  • Possible to have multiple views for one scene?

    Away3D allows multiple Views to be created for one Scene, allowing different camera positions for the same geometry.
    Can Proscenium support this? I've been banging my head against a brick wall for a while now...
    Joe

    Hi Kopaacabana,
    (I  feel like I'm in one of those post-apocalyptic scenes where the last two humans left on earth finally meet.....)
    Thanks for answering!
    Yes, I've actually got two cameras quite happily working in the scene, the problem is that I need to re-use the geometry for the scene in two windows, or at least, two separate parts of one window simultaneously. Away3D can do it very easily, where one sets up a 'View', which has a 'Scene' it views. With Proscenium it seems that the whole thing is tied up with an Instance3D, which is fine for one camera, but the scene nodes seem tied up as children of some root scene node. I've tried assigning the scene data as a child of two instances of BasicScene (hacking the stage3ds[number] to be different for each), but that causes an exception.
    Just changing the activeCamera changes the view to the new camera, where I actually need to be able to render to two windows/screen areas from one set of geometry.
    I would have hoped that the paradigm would have been 'here is some geometry, lights, etc., now do with it what you will'
    Adobe, are you there to help us out, like, anyone at all? Are we wasting our time with this?
    Joe

  • In the "View"-- "Page Source" window: why can't I select a portion of a URL like I used to in previous versions? If I try, the source text behaves as an active hyperlink instead. This makes copying and editing HTML a pain!

    In want to copy a portion of a URL from the "View" --> "Page Source" window and paste it in my favorite text editor. This used to be a simple action with my mouse (mark portion with left mouse button, dump copy into editor window with middle mouse button). In Firefox 3.6.9, it is not plain text in the "Page Source" window but active hyperlinks (cursor shape changes) and takes me to the website of that URL, which I don't want. How can I get the original behavior (plain text page source) back?

    The code taht you have shown is not the template, it is a document that has been created from a template and renamed with a dwt extension.
    If you load the document into DW then go to menu item Modify->Templates->Detach from Template and save the file, you will have your original template called index.dwt and located in the Templates subdirectory.

  • My laptop is no longer reliable. I want to share my iTunes account with my new iPad 3.   I just started viewing my iPad window on my 50 inch Panasonic wirelessly via Apple Tv 2.  That amazing.    I would like to access my iTunes store via iPad for podcast

    My laptop is no longer reliable. I want to share my iTunes account with my new iPad 3.   I just started viewing my iPad window on my 50 inch Panasonic wirelessly via Apple Tv 2.  That's amazing.
    Now I want to share my iTunes account with my Apple TV  1, and my iPad 3, without the need of booting up the unreliable laptop where I set it up last year.   do I have to use my. Pc laptop to access the iTunes store again too authorize home sharing.   I have tried it before. O for a while I thought the we're sharing, now the Apple Tv has gone back to telling me to use my computer too sign into iTunes.     
    there maybe a far simpler way to enjoy iTunes on my iPad and Apple Tv.   I also have the Sony blurry Google Tv.  I will upgrade my PC with Windows Z8 and a screaming ran cache, ram disk on a 79 mother board and then pay 5 bucks a month for OnLive Plus that I hpe to show wirelesslypy on the big scree 50 inch Panasonic.   I have waited for years to upgrade as I wanted to help my kids in college.  They are finished and so I have money fr my self.CELEBRATE

    Are you using the charger and cable that came with the phone?
    Are you using an unauthorized third party charger?

  • How can I have multiple views for my question

    When I posed a question on a forum, it indicates that I have one (1) view. How can I have multiple views on the same question?

    I believe the number you are looking at is the number of times a particular thread has been looked at (viewed) by different users. When someone else opens your question, the view count should increase.
    Justin

  • Passing one parameter to multiple views

    Is this possible?  I would like to pass one parameter, a date field, to multiple views.  I cannot use it in the record selection, because my views do a mathematical computation which returns a single value, but I only want to select the data for a single day. 
    The problem is that there are several views and I do not want to have to enter the date parameter a dozen times.

    Try to use add command and write the query like this
    select * from view where datefield={?date}
    also create another add command for the other view
    select * from view2 where datefield2={?date}
    for all the queries create the same parameter with the name {?date}
    Regards,
    Raghavendra

  • Can Numbers Display Multiple Views of the Same Table

    Hi,
    Excel and Appleworks both have a pull down tab on the vertical bar allowing multiple views into the same spreadsheet (table). Can Numbers do this?
    I have a set of calculations at the top of a spreadsheet that are based on years and years worth of data under the calculations (same column). I add data for each new event (the rows) and watch the calculations at the top of the data. Easy to do in Excel or Appleworks, but, I can't figure out how to do this in Numbers.
    Example:
    Spot1 Spot2
    Total 15 36
    Avg 5 12
    Jan 09 5 10
    Feb 09 6 20
    Mar 09 4 6
    Apr 09
    So... does Numbers allow the view "split" or multiple views that Excel and Appleworks allow?
    Thanks!
    Tom

    Question asked and responded several times:
    feature unavailable.
    For multiple views of a table there is an easy workaround as we may build a table whose every cells grab their contents from the 'master' one.
    _Go to "Provide Numbers Feedback" in the "Numbers" menu_, describe what you wish.
    Then, cross your fingers, and wait _at least_ for iWork'10
    Yvan KOENIG (VALLAURIS, France) mardi 1 septembre 2009 21:56:42

  • How can i navigate via navigational link between views in different windows

    hello
    i am using CRM_UI and have opened a popup
    gv_transcr_popup is a attribute referrring to if_bsp_wd_popup in my implementation class
    gv_transcr_popup = comp_controller->window_manager->create_popup(
        iv_interface_view_name = 'AIC_CM_TRANS/AssignTranspReq' "#EC NOTEXT
        iv_usage_name          = 'CUBAssignTransporReq'         "#EC NOTEXT
        iv_title               = lv_title ).
    get instance of BOL dynamic query
      lo_qs = cl_crm_bol_dquery_service=>get_instance( 'BTQAIC_CM_TRANSPORTREQ').
      gv_transcr_popup->set_on_close_event( iv_view = me iv_event_name = 'AssignTranspReq' ).
      gv_transcr_popup->set_display_mode( if_bsp_wd_popup=>c_display_mode_surrounded ).
      gv_transcr_popup->open(   ).
    through the iv_usage_name i will open in this popup a search view from another window
    in this window is a searchview implemented and now after selecting the line in the result view in want to navigate through outbound plug / inbound plug to the starting view .
    but i get the exception
    Target view AIC_CM_TRANS/TransportReq of the navigation is not assigned to the current window AIC_CM_TRANS/AssignTranspReq ( which is true)
    now the question: how can i navigate between views of different windows?
    Best Regards
    britta

    hi
    i have found a way : you have to use a outboungplug from the windows interface ..then it is working
    best regards
    britta

  • My photos always seem to look darker in photoshop elements than when I view them in windows photo viewer - and now I have purchased the annual contract for photography cloud they look exactly the same in PS CC6 as they do in photo viewer - but I still use

    My photos always seem to look darker in photoshop elements than when I view them in windows photo viewer - and now I have purchased the annual contract for photography cloud they look exactly the same in PS CC6 as they do in photo viewer - but I still use PS Elements 12 for some tasks and they still appear slightly darker in there - any ideas? - Regards Robert

    My photos always seem to look darker in photoshop elements than when I view them in windows photo viewer - and now I have purchased the annual contract for photography cloud they look exactly the same in PS CC6 as they do in photo viewer - but I still use PS Elements 12 for some tasks and they still appear slightly darker in there - any ideas? - Regards Robert

  • Icon view in Finder windows do not autowrap

    I am using 10.5.1 on a 17" MBP 2.16 ghz.
    Since installing Leopard, Icon view in Finder windows do not autowrap and Finder windows do not always remember their display preferences.
    The Trash auto-wraps (the icons spread to take up the entire window if it is enlarged) But Opening a Folder in my default list view and switching to Icon view and then enarging the window only shows icons in the original window width. EG, If it were 3 colums of icons, it stays 3 columns of icons unless I use Clean Up TWICE and then I get 10 columns of icons which will wrap.
    Is this a Leopard BUG or a local problem. Any suggestions on fixing it?
    TIA,
    Bill

    Yeh - though I use cmd-J which I have used since it appeared, 10.1?
    But I just solved my problem. In my use as defaults selection, I had Snap to Grid selected in the arrange by pop-up rather than by Name.
    Selecting Name and clicking on Use as Defaults makes things work as expected.
    Thanks for making me look closely!
    Cheers,
    Bill

  • I have been working on a book and have 418 photos already in my book.  All of a sudden I cannot access the book format to see the multiple view, spread view, or single view.  I can no longer see my book although I still see the collection with 418 photos

    I have been working on a book and have 418 photos already in my book.  All of a sudden I cannot access the book module and clicking on the multiple view, spread view, or single view does not take me back to the book I have been working on.  I can no longer see my book although I still see the collection with 418 photos under collections.  What I do see is a blank template for a new book and I can't find the unfinished book I started with 418 photos.  It is like the new empty template is somehow covering it up.  How do I get back to the book I have been working on?

    Is it possible you mistakenly clicked on a [Clear Layout] button?
    But a great hint is- Always click on the [Create a Saved Book] button, early in your new book design.
    Then you have a permanent link to the book in the Collections panel. (In addition to the standard collection of your selected images)
    Note: a Book Collection shows an icon that looks like a book.
    Every time you come back to edit the book, open the Book Module by clicking on the white arrow that appears on the end of your Book Collection title. (The title as saved)
    Re-opening a book without using the "Saved Book" option can have unpredictable results.
    A "Book" Collection is like a "Smart Collection" because anything you do to the book design, change pages, change images, etc,  is automatically updated in the Saved Book collection.

Maybe you are looking for