Multiple views of ALV

Hi All,
How to view different columns in ALV at different times depending on the users choice.
Rgds,
Arti.

Hi Arti,
You can hide/unhide specific columns in your ALV data based on the user need, or based on a particular scenario. You can use the following code to achieve hiding/unhiding of columns:
DATA: lo_config_model_value         TYPE REF TO cl_salv_wd_config_table. " Configuration Model
DATA: lo_column                     TYPE REF TO cl_salv_wd_column. "Column
Get the configuration model. Call interface method GET_MODEL.
lo_interfacecontroller =   wd_this->wd_cpifc_alv( ).
lo_config_model_value = lo_interfacecontroller->get_model( ).
Make columns in ALV visible/invisible:
lo_column = lo_config_model_value->if_salv_wd_column_settings~get_column( 'COLUMN_NAME' ). "Column name as in the context attribute associated with a column
lo_column->set_visible( if_wdl_core=>visibility_blank ). "use IF_WDL_CORE=>VISIBILITY_VISIBLE to make a column visible
You can also set column positions:
lo_column = lo_config_model_value->if_salv_wd_column_settings~get_column( 'COL_NAME' ).
lo_column->set_position( 0 ).
CLEAR lo_column.
lo_column = lo_config_model_value->if_salv_wd_column_settings~get_column( 'COL2_NAME' ).
lo_column->set_position( 1 ).
Hope this helps.
Best Regards,
Viqar Ali.

Similar Messages

How to select multiple row in ALV report

Hi friends,
1. How to select multiple row in ALV report
               ( How to set tab in ALV report and want to select multiple line.)
Thanking you.
Subash

Hi Sahoo,
If you are using the class CL_GUI_ALV_GRID. In methods SET_TABLE_FOR_FIRST_DISPLAY.
in layout structure you will find field SEL_MODE
pass :
LS_LAYOUT-SEL_MODE = 'A'.
In PAI.
CALL METHOD GRID->GET_SELECTED_ROWS
    IMPORTING
      ET_INDEX_ROWS = T_ROWS
      ET_ROW_NO     = T_ROWID.
Hope these will solve your problem.
Regards,
Kumar M.

How can I have multiple views for my question

When I posed a question on a forum, it indicates that I have one (1) view. How can I have multiple views on the same question?

I believe the number you are looking at is the number of times a particular thread has been looked at (viewed) by different users. When someone else opens your question, the view count should increase.
Justin

Passing one parameter to multiple views

Is this possible? I would like to pass one parameter, a date field, to multiple views. I cannot use it in the record selection, because my views do a mathematical computation which returns a single value, but I only want to select the data for a single day.
The problem is that there are several views and I do not want to have to enter the date parameter a dozen times.

Try to use add command and write the query like this
select * from view where datefield={?date}
also create another add command for the other view
select * from view2 where datefield2={?date}
for all the queries create the same parameter with the name {?date}
Regards,
Raghavendra

Can Numbers Display Multiple Views of the Same Table

Hi,
Excel and Appleworks both have a pull down tab on the vertical bar allowing multiple views into the same spreadsheet (table). Can Numbers do this?
I have a set of calculations at the top of a spreadsheet that are based on years and years worth of data under the calculations (same column). I add data for each new event (the rows) and watch the calculations at the top of the data. Easy to do in Excel or Appleworks, but, I can't figure out how to do this in Numbers.
Example:
Spot1 Spot2
Total 15 36
Avg 5 12
Jan 09 5 10
Feb 09 6 20
Mar 09 4 6
Apr 09
So... does Numbers allow the view "split" or multiple views that Excel and Appleworks allow?
Thanks!
Tom

Question asked and responded several times:
feature unavailable.
For multiple views of a table there is an easy workaround as we may build a table whose every cells grab their contents from the 'master' one.
_Go to "Provide Numbers Feedback" in the "Numbers" menu_, describe what you wish.
Then, cross your fingers, and wait _at least_ for iWork'10
Yvan KOENIG (VALLAURIS, France) mardi 1 septembre 2009 21:56:42

I have been working on a book and have 418 photos already in my book. All of a sudden I cannot access the book format to see the multiple view, spread view, or single view. I can no longer see my book although I still see the collection with 418 photos

I have been working on a book and have 418 photos already in my book. All of a sudden I cannot access the book module and clicking on the multiple view, spread view, or single view does not take me back to the book I have been working on. I can no longer see my book although I still see the collection with 418 photos under collections. What I do see is a blank template for a new book and I can't find the unfinished book I started with 418 photos. It is like the new empty template is somehow covering it up. How do I get back to the book I have been working on?

Is it possible you mistakenly clicked on a [Clear Layout] button?
But a great hint is- Always click on the [Create a Saved Book] button, early in your new book design.
Then you have a permanent link to the book in the Collections panel. (In addition to the standard collection of your selected images)
Note: a Book Collection shows an icon that looks like a book.
Every time you come back to edit the book, open the Book Module by clicking on the white arrow that appears on the end of your Book Collection title. (The title as saved)
Re-opening a book without using the "Saved Book" option can have unpredictable results.
A "Book" Collection is like a "Smart Collection" because anything you do to the book design, change pages, change images, etc, is automatically updated in the Saved Book collection.

SAPGUI JAVA 7.10 (OSX 10.5.1): cannot select multiple columns in ALV

Hi,
in sapgui java 7.10 (on mac osx 10.5.1) I cannot select multiple columns in ALV reports.
I can do it only in some transactions (like SE16). But on all our custom reports (REUSE_ALV_GRID_DISPLAY) in does not work.
Any hint?
Many thanks,
Lorenzo

Hi Lorenzo,
did you double check if selecting multiple columns works with SAP GUI for Windows in the same report?
If yes, I suggest to file a bug report so we can do a remote logon to run your custom report.
If not it might be because of REUSE_ALV_GRID_DISPLAY itself or your parameters calling REUSE_ALV_GRID_DISPLAY.
Best regards
Rolf-Martin

MVC �Best Practice� (handling multiple views per action/event)

Looking for the best approach for handling multiple views for one action/event class? Background: I have a small application using a basic MVC model, one controller servlet, multiple event classes, and multiple JSP views. For performance reasons, the controller Servlet is loaded once, and each event class is an instance within it. Each event has an �eventProcess()� and an �eventForward()� method called by the controller, standard stuff.
However, because event classes should not use instance variables, how should I communicate which view to forward to should based upon eventProcess() logic (e.g. if error, error.jsp, if success, success.sjp)? Currently, there is only one view mapped per event, and I'm having to put error handling logic in the JSP, which goes against the JSP being for just view only.
My though was 1) A session object/variable that the eventProcess() sets, and the eventForward() reads, or 2) Have eventProcess() return a mapping key and have the conroller lookup a view page based upon that key, as opposed to 1-1 event/view mapping.
Would like your thoughts!
Thanks
bRi

Your solution seems ok to me, but maybe the Struts framework from Apache
that implements MVC for JSP is a better solution for you:
http://jakarta.apache.org/struts/index.html
You should take a look at it. It has in addition some useful taglibs that makes life much easier.
We have successfully used it in a project with about 50 pages.

Table based on multiple views

Hello all,
Is it possible to populate a table with data from multiple view objects that are linked with a view link?
The reason i want to do this is because if you update the reference ID in the master the detail automatically follows.
Now, I know i can create a view object and then include the detail info using expert mode, but this way the detail info doesn't change if i change the reference ID.
To conclude, a brief explanation of what i'm trying to achieve.
I have a table with adresses. Having a reference ID to the ZIP table.
Because the user doesn't know all the ID's by heart i show the name of the city and the user can change them by clicking on a lov button. This all works fine, BUT, when the city is changed the old one stays visible for the user. Although committing, changes the city to the new one.
Regard
Johan

Keeping in mind what Dave just said, you would be better off creating your GTT once. Then reusing it over and over again. Using GTTs is advantagous in that its contents are visible only at the session level, and depending on how the GTT was created it will either automatically truncate the table on commit (the default if not otherwise specfied) or truncate the table at the end of your session regardless of commits.

Multiple Heading in ALV Grid

Hello ,
I have a requirement to display Multiple heading in ALV Grid, I am using the Class 'cl_gui_alv_grid'. please let me know if you have Any suggestions.
Ex:
|                 Divison                     |
Sub D:1
Sub D: 2
Sub D: 3
    Like wise i have few more divisions to display and Under we need to display the Sub Division also .
Thanks in Advance.. Waiting for your suggestions.
With Best Regards
Nags

Hi,
I had attempted to do it in the object oriented way, but found no ready solution, so I settled for the below solution.
Please use the function REUSE_ALV_COMMENTARY_WRITE.
This allows you to print multiple lines in the header.
I had a requirement of showing 5 lines in the header.
So i went on like:
DATA: it_list_commentary TYPE slis_t_listheader,
           wa_list_commentary TYPE slis_listheader.
wa_list_commentary-typ = 'H'.
wa_list_commentary-info = <text>.
APPEND wa_list_commentary TO it_list_commentary.
wa_list_commentary-typ = 'S'.
wa_list_commentary-info = <text>.
APPEND wa_list_commentary TO it_list_commentary.
I fed he internal table with all 5 lines like above.
Finally I called the function.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary = it_list_commentary.
Regards,
Prosenjit.
Edited by: prosenjit chaudhuri on Jan 28, 2009 6:14 AM

Controlling Post Order of Multiple View Objects

Hi ,
Here is the scenario:
I have a use case of "Creating an Abstract"
Steps:
step1 ) (Page 1) Author presents the details of the abstract (Details goes to 2 tables ABSTRACT & ABSTRACT_CONTENT tables). For the 2 tables i have 2 entities. I use a view here called CreateAbstractView from both the tables( here i control the post order of the entities ....code from jdeveloper 11g guide)
Step 2)(Page 2) Author presents details of Additional Authors. I use the view (*AdditionalAuthorDetailsView*) (Details goes to 2 tables AUTHOR & ABSTRACT). Here in the abstract table i have a parent key(parent abstract id) So all the additional authors has a record in Abstract table with parent_abstract_id from step1. ABSTRACT table also has a foreign key (author_id) .Here also i control the post order of the 2 entity object using the code from jdeveloper 11g guide.
I also have a link from CreateAbstractView to AdditionalAuthorDetailsView (abstract_id in Abstract table from CreateAbstractView to parent_abstract_id in Abstract table from AdditionalAuthorDetailsView )
If i have a commit on both the pages , i don't see a problem.
But i want to have a commit process at the end so that the user can review the information. So when i try to add a commit process at the end , i get a exception (Parent Key not found exception) which i came to understand that commit from AdditionalAuthorDetailsView is happening first which is trying to insert a record into ABSTRACT table and cannot find the parent_abstract_id.
How do i control the post order for multiple view objects in such scenarios?

Hi!
Please take a look at the dev guide. It comes down to controlling the posting order on entity level.
http://download-uk.oracle.com/docs/html/B25947_01/bcadveo007.htm#CEGJAFCF
Sascha

How to select multiple records in ALV with out pressing ctrl

Hi Experts,
Is there a way to select multiple records in ALV with out pressing ctrl button on the key board?
Selection and deselection should allow multiple records.
any clue is highly appreciated.
regards,
Ajay

The keyboard always plays a role, although with the Shift key you can select blocks of records.
○ CTRLclick, CTRLspacebar
Toggles a selection.
○ SHIFTclick, CTRLshift
Selects the area from the lead selection to the row selected. If no lead selection is set, the selection starts from the first row. In the multiNoLead mode, the selection starts from the row last selected

Multiple View sessions, same PC?

View 6.0.1, Client 3.3.0
Can I have multiple View sessions from the same PC? In other words
Launch the Horizon View client, login, and access a desktop
Launch the Horizon View client again, login as a different user, and access a different desktop
Repeat until I have many session open at once
The reason I ask is we are migrating from Exchange to Gmail. Google provides a utility called GAMME that in a larger environment can be run from multiple machines with each machine migrating one portion of the alphabet. Rather than using 10 physical machines I would rather use 10 View desktops. This will work slick if from my real PC I can access all 10 view desktops. I will be using a different login account to access each desktop.

Have not tried yet. I did not want to go through the time setting up a separate non-persistent desktop pool if I could not login to more than one desktop at the same time. Now that I know it will work, I will run with it. Thanks for the help

Define multiple views

I'm trying to build a simple app which has multiple views. When the user clicks on the worksetItem I want to change the view, and display an other table in the shell. But I dont know how can I define another view, and add it to the shell.

Hy Venkatesh
I've found the link too that you've posted.
I've used the following tutorial to buld the base of my app:
Developing a simple List based SAPUI5 Application
And now I want to spereate the BP data, and create a subview for it, and do the same for Sales, than load it to the main view, when the user clicks on the menu. But I dont really know how to write my own view. (what to write to the "createContent()").

Complex Query - Joins vs Multiple Views

I am trying to run a query that joins a main table representing people with 7 others that contain demographic and status information. Some of the other tables don't have records or have more than one record per person. For the instances of more than one phone number for a person, I need to filter out all but the active home number record. If the person doesn't have a phone number, I still need a record returned, just without a phone number listed. I have tried joining all the tables in a single query, but can't get every person to show up in the results. If the person doesn't have a phone number, or has a phone number that isn't both active and "Home" then they don't show up... I got around this by using multiple views to make sure everyone was pulled, but the multi level view runs slow as heck... Here are the two approaches. Any ideas?
Here are the views that work:
CREATE OR REPLACE VIEW pinnacle_address AS SELECT p.person_id, a.line1 | | ' ' | | a.line2 | | ' ' | | a.line3 AS StreetAddress, a.city, a.state, a.zip FROM cmn_people p, cmn_people_addresses a WHERE p.person_id=a.person_id(+) and a.Active_Address = 'Y' and a.Address_Type = 'Home';
CREATE OR REPLACE VIEW pinnacle_phone AS SELECT p.person_id, ph.phone_number, ph.phone_number_type FROM cmn_people p, cmn_phone_nos ph WHERE p.person_id=ph.person_id(+) and ph.active_phone_number = 'Y' and ph.primary_flag = 'Y';
CREATE OR REPLACE VIEW pinnacle_people AS SELECT p.person_identifier01, p.last_name, p.first_name, p.middle_name, p.date_of_birth, p.gender, a.StreetAddress, a.city, a.state, a.zip, ph.phone_number, ph.phone_number_type, p.email, p.ssn, p.ethnic, p.fulltime, p.person_id FROM cmn_people p, pinnacle_address a, pinnacle_phone ph WHERE p.person_id=a.person_id(+) and a.person_id = ph.person_id(+);
CREATE OR REPLACE VIEW pinnacle_student AS SELECT DISTINCT p.person_identifier01, p.last_name, p.first_name, p.middle_name, p.date_of_birth, p.gender, p.streetaddress, p.city, p.state, p.zip, p.phone_number, p.email, p.ssn, p.ethnic, p.fulltime, i.student_instance_id, e.comb_id FROM sss_student_enrollments e, sss_student_instance i, pinnacle_people p, cmn_statuses s WHERE e.person_id=i.person_id and i.person_id=p.person_id and i.status_id=s.status_id and s.status in('Active', 'Accepted');
Here's the single sql that doesn't:
CREATE OR REPLACE VIEW pinnacle_test AS SELECT DISTINCT cp.PERSON_IDENTIFIER01, cp.LAST_NAME, cp.FIRST_NAME, cp.MIDDLE_NAME, cp.DATE_OF_BIRTH, cp.GENDER, cpa.LINE1 | | ' ' | | cpa.LINE2 | | ' ' | | cpa.LINE3 AS StreetAddress, cpa.CITY, cpa.STATE, cpa.ZIP, cph.PHONE_NUMBER, cp.EMAIL, cp.SSN, cp.ETHNIC, cp.FULLTIME, si.STUDENT_INSTANCE_ID, se.COMB_ID FROM SSS_STUDENT_ENROLLMENTS se, SSS_STUDENT_INSTANCE si, CMN_STATUSES cs, CMN_PEOPLE cp, (SELECT * FROM CMN_PEOPLE_ADDRESSES WHERE Active_Address = 'Y' and Address_Type = 'Home') cpa, (SELECT * FROM CMN_PHONE_NOS WHERE active_phone_number = 'Y' and primary_flag = 'Y') cph WHERE se.PERSON_ID = si.PERSON_ID and si.STATUS_ID = cs.STATUS_ID and si.PERSON_ID = cp.PERSON_ID and cp.PERSON_ID(+) = cpa.PERSON_ID and cpa.PERSON_ID(+) = cph.PERSON_ID and cs.status in ('Active', 'Accepted');
Thanks in advance,
Erik Marin
[email protected]

CREATE OR REPLACE VIEW pinnacle_student
AS
SELECT DISTINCT p.person_identifier01,
p.last_name,
p.first_name,
p.middle_name,
p.date_of_birth,
p.gender,
a.line1 | | ' ' | | a.line2 | | ' ' | | a.line3 AS StreetAddress,
a.city,
a.state,
a.zip,
ph.phone_number,
p.email,
p.ssn,
p.ethnic,
p.fulltime,
i.student_instance_id,
e.comb_id
FROM sss_student_enrollments e,
sss_student_instance i,
cmn_people p,
cmn_people_addresses a,
cmn_phone_nos ph,
cmn_statuses s
WHERE e.person_id = i.person_id
and i.person_id = p.person_id
and i.status_id = s.status_id
and p.person_id = a.person_id(+)
and p.person_id = ph.person_id(+)
and s.status in ('Active', 'Accepted')
and a.Active_Address(+) = 'Y'
and a.Address_Type(+) = 'Home'
and ph.active_phone_number(+) = 'Y'
and ph.primary_flag(+) = 'Y';
null

Multiple views of ALV

Similar Messages

Maybe you are looking for