Multiple volume levels on iPhone5

Something that has confounded me for some time is the (varied) volume level of my iPhone 5s over my car audio system. (I am running the latest iOS version)>
I have the iPhone plugged directly into the 3.5mm port of the car audio system; I am not using bluetooth.
After setting a comfortable volume for playing music via iTunes, I will get an incoming call and have to boost the volume considerably in order to hear the caller. When the call is terminated, the volume of the music is now, of course, deafening and I have to scramble to turn it down. Embarrassing when someone else is in the car as they conclude that I don't know how to set up my iPhone properly.
Thanks for any help on this.
Bob
" The single biggest problem in communication is the illusion that it has taken place."
- George Bernard Shaw

but where is the manual!!!!!!!
That's easy! Go to http://support.apple.com/manuals/#ipod
which clearly suggests that I use the volume buttoms on the left of the set and buttons are illustrated on the user manual diagram and yet my handset has no such buttons!
That's because the volume button is only on the new 2nd generation touches. If you don't have the external volume control, you have a 1st generation touch.

Similar Messages

Can I have multiple volume levels in one track?

I have a track composed of audio from a cassette recorder of a now deceased relative's voice.
Since the cassette was turned on and off during recording, the recordings are at different volumes.
I have been able to import the cassette into a GarageBand project, and delete dead space, but now I find that the volume is not consistent.
Any way to remedy that? I am wondering if I need to chop it up and make more than one track, and adjust the volume on each track? Will this work as long as the tracks don't overlap?
And then do I send the finished product to iTunes in order to be able to use it in an iMovie?
Or can I drag it right from GarageBand to iMovie?
Many thanks, I'm a very new GarageBand user.

JGolomb wrote:
Can I have multiple volume levels in one track?.
search GB's help for "curve"
And then do I send the finished product to iTunes in order to be able to use it in an iMovie?
"Share" it to disc
can I drag it right from GarageBand to iMovie?
no

Can I have multiple volume levels along one audio clip? PE12

For instance I want there to be a single score of music over the video soundtrack. But I want the music score to lower in volume when important things are being said in the soundtrack. Any way I can raise and lower the volume at different points in the music score?

KeechakVarg
Thanks for the update and the good news of progress.
The Audio Mix is an automatic route for placing those volume keyframes...basically, as the Timeline content plays in the Edit area monitor with the Audio Mix dialog open, you adjust the Audio Mix's volume sliders for the numbered audio track, narration track, or soundtrack involved.
The Smart Mix basically can adjust the volume in the narration or soundtrack against the dialog in a numbered audio track depending on how you designated track, Foreground or Background.
The volume keyframes that are set by these means can be seen as white dots on the audio clip rubberband and can be adjusted there also.
These volume keyframes can also be adjusted in the Show/Hide Keyframe Controls area in the Adjust Tab/Adjustments Palette/Volume panel expanded area.
You can also do volume keyframing at the Timeline level. See audio clip rubberband which is the orange line that runs horizontally across the audio clip.
If you do not see the "white dotes" volume keyframes...
a. Make sure the clip is set for Volume:Clip Volume and then right click the audio clip, select "Show Clip Keyfrasmes", and follow the path to Volume:Clip Volume.
We will be watching for your results.
Thank you.
ATR
Add On...Audio Clip Rubberband
http://www.atr935.blogspot.com/2014/05/pe12-audio-features.html

Spreading your Aperture Library across multiple volumes/drives/disks

I recall reading posts elsewhere by others (on an Adobe Lightroom forum) on how one's Aperture Library had to sit on one volume, meaning that it could not span multiple disks. At the time I figured I would be fine for a while since I had about 150 GB of free space on my main disk, yet kept the topic at the back of my mind.
Today, as I do regularly, I was backing up my (Aperture) library to my iPod, (not through the "vault" mechanism but simply using Finder,) when I noticed it was copying (many) individual files, rather than one large file! Being familiar with Unix, including how certain items in Mac OSX are treated, such as "Applications" that appear to be one object in the GUI, yet are merely a folder structure behind the scene, it occurred to me that the Aperture Library, rather than being some sort of single-file database format, just might be a folder instead.
I checked, and it is. Mind you, that doesn't prevent Aperture from keeping proprietary files within those folders, however, it would seem to me that one could easily use symbolic links to throw some of the files, perhaps at the project level, onto other disks, and thus span your library across multiple volumes even if Aperture does not yet offer or manage this ability.
iMac G5 2.1 HGz, 1.5 GB RAM, 20" Mac OS X (10.4.7)

Perhaps this article will help shed light on Aperture's library organization:
http://homepage.mac.com/bagelturf/aparticles/library/libinside/libinside.html
Enjoy!
-- Jim

Ufsdump and ufsrestore with multiple volumes

How to ufsdump and ufsrestore with multiple volumes?
I want to backup and restore a large directory with ufsdump and
ufsrestore, so it requires multiple tapes (two in this example).
After backuping tape 1, I press the eject button of the tape drive to
eject the button, then I insert a second tape and type "yes" to
continue.
# /usr/sbin/ufsdump 0uf /dev/rmt/0cn /opt/bsm
DUMP: 89.66% done, finished in 0:04
DUMP: End-of-tape detected
DUMP: 92.68% done, finished in 0:03
DUMP: Change Volumes: Mount volume `#2' on `pwdly0ee:/dev/rmt/0cn'
DUMP: NEEDS ATTENTION: Is the new volume (#2) mounted on
`pwdly0ee:/dev/rmt/0cn' and ready to go?: ("yes" or "no")
DUMP: NEEDS ATTENTION: Is the new volume (#2) mounted on
`pwdly0ee:/dev/rmt/0cn' and ready to go?: ("yes" or "no")
DUMP: NEEDS ATTENTION: Is the new volume (#2) mounted on
`pwdly0ee:/dev/rmt/0cn' and ready to go?: ("yes" or "no") ye
DUMP: NEEDS ATTENTION: Is the new volume (#2) mounted on
`pwdly0ee:/dev/rmt/0cn' and ready to go?: ("yes" or "no") yes
DUMP: "yes" or "no"?
DUMP: NEEDS ATTENTION: Is the new volume (#2) mounted on
`pwdly0ee:/dev/rmt/0cn' and ready to go?: ("yes" or "no") yes
DUMP: Volume 2 begins with blocks from inode 430787
DUMP: 92.70% done, finished in 0:03
DUMP: Change Volumes: Mount volume `#2' on `pwdly0ee:/dev/rmt/0cn'
DUMP: NEEDS ATTENTION: Is the new volume (#2) mounted on
`pwdly0ee:/dev/rmt/0cn' and ready to go?: ("yes" or "no") yes
DUMP: Volume 2 begins with blocks from inode 430787
DUMP: 92.70% done, finished in 0:03
DUMP: 4731838 blocks (2310.47MB) on 2 volumes at 840 KB/sec
DUMP: DUMP IS DONE
DUMP: Level 0 dump on Sat 08 Nov 2003 02:53:58 PM EST
# /usr/sbin/ufsrestore rf /dev/rmt/0cn
Mount volume 2
then enter volume name (default: /dev/rmt/0cn)
Mount volume 3
then enter volume name (default: /dev/rmt/0cn) <- insert second tape
Wrong volume (2)
Mount volume 3
then enter volume name (default: /dev/rmt/0cn) 2
Cannot open 2
Mount volume 3
then enter volume name (default: 2)
Cannot open 2
Mount volume 3
After tape 1 in finished restoring, I eject the tape and insert the
second tape.
Now what should I do to continue tape restoring?

I don't think that you're supposed to type in the number "2". What ufsrestore is looking for is the next ufsrestore volume, not the volume number. If it is a tape drive, which this apears to be, you specify the tape drive device: dev/rmt/0cn.

HT201250 Can I back up multiple volumes using Time Machine on Snow Leopard?

I have a fault with my time machine software where it is no longer able to perform incremental back ups of the volumes (partitions) I have created on my internal hard drive - every attempt results in a full back up. However incremental back up of the Mac HD is working. I have had it working perfectly in the past. I'm backing up to a dedicated external hard drive.
I have just been told by an apple support manager that Time machine on OS 10.6.8 is not designed to back up multiple volumes (partitions) on my internal hard drive, only the current Mac HD drive - is this correct? He said it shouldn't be backing up the other volumes and the reason it is doing so and has done so in the past is because of bug!
Surely this is not the case?

I would read and try this. Pondini is very knowledgeable about Time Machine:
http://pondini.org/TM/32.html
Ciao.

How can a consistent volume level be set for all the songs in an iTunes library?

The volume of the songs in my iTunes library varies significantly when played on my iPod. Is there any way of setting a consistent/equal volume for the songs in my library so that I don't have to change the volume level when listening to my iPod?

I have used the $30 iVolume utility to equalize my iTunes song's volume for several years and it works well. I just wish it worked for music videos. iVolume is available on the Mac App Store, or you can try before you buy at the developer's site: http://www.mani.de/en/ivolume/index.html

How can i create a zip-file with multiple volumes

Hi,
i've to zip a large file (250 MB and more). But the zip file shouldn't be greater than 5 MB, because i have to send the file via E-Mail. So i've thought, that the solution of this problem can be to zip the large file in smaller zip-files, which are multiple volumes of a zip-archive. I've searched very long in WWW, but didn't find something. Perhaps you can help.
Sorry, about the bad english. :-)
Timo Bunger

Hi
Who said your english is bad ?. OK, are you looking for compressing the 250 MB file in to multiple versions using a java program ?. If not, there is a shareware you can download and split the file into multiple parts by specifying size of each part. You can send these parts via email and the other person can combine these parts into a single file again.
Find this @
http://www.freedownloadscenter.com/Utilities/File_Splitting_Utilities/EzSplit.html
You may need to read a bit about it on how to use.
Thanks
Srinivas

Using compressor DVD Studio Pro 4 will only accept ac3 format in the burn process. ac3 makes a nnsense of the good sound delivered, 30% reduction in volume, auto volume levelling giving unwanted volume variations. Used to be able to burn using AIFF/WAVE,

AS Above. Edited in FCPX. Excellent sound file. Using Compressor 4 to DVD Studio 4. Wanting AIFF or WAVE sound for acurate sound.
Previously DVD Studio 4 has accepted AIFF etc and delivered sound as reuired. Now, during the burn process everything other than ac3 is declined as 'video bit rate too high', but will burn if the AIFF format is replaced with ac3 (which I presume meanss the 'video bit rate too high' is referring to the sound file)
The issue with ac3 format is the huge reduction in original volume and worse, the 'auto volume levelling' that makes a nonsense of the original soundtrack - with simply aweful unwanted variations in volume Throughout the the dvd.
I have tried everything I can think of to get around this. The 'volume gain' in compressor doesn't make any difference. Exporting just AIFF and the Video to DVD 4 doesn't make any difference, it always declines anything but the aweful sound ac3 delivers.
I have customers awaiting a musci DVD, not with thei quality I can't.
Cheers
Phil

The total video bit rate is determined by audio & video. Depending on what rate your video file was encoded at will determine how much room is left for audio. PCM(aiff/wav) audio requires a bigger piece of the pie. Video bit rate too high means your overall(video+audio) rate is going above 9Mbps which the format won't allow. The only way to use aiff would be to lower your video file's data rate. The length of your program is also a factor in all of this.
I had some problems in the past with using aiff instead ac3. Although there shouldn't be any issue I experienced playback issues on some players that couldn't be explained but were cleared up by ac3. I have been using the same specs as Dave's suggestion for almost nine years and have not had any issues with mix, quality, or levels.

Sometimes my iphone 5S produces low sound even on full volume level. Then i do restart it. But i am not sure where exactly the problem is? Need help.

Sometimes my iphone 5S produces low sound even on full volume level. Then i do restart it. But i am not sure where exactly the problem is? Need help.

Hi saiyed adil,
Thank you for contributing to the Apple Support Communities.
It appears that your iPhone 5s sometimes produces low sound, but a restart corrects it.
It can take some time to isolate and resolve intermittent issues like this one, and I'd recommend going through the steps in this guide the next time it occurs:
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
All the best,
Jeremy

Is there any "mechanical" helper to get my volume levels the same?

I create playlists from ratings,(and comments),- and albums have different volume levels. As I always use my ipod to go to sleep, it is very destructive, to not be able to hear my music one minute, and then have it much too loud the next.
Is there ANYTHING, free or chargeable, physical or software, that can help me get my itunes library to all the same volume level. My problem is agrivated by the fact that I do have some shared downloads, and also someone put my vynils onto cd for me, but at a lower volume.
I might add, that I'm still a learner on the computer. I have been told to change the soundcheck -playback -preferences -itunes. I have tried it, ticked and unticked - it doesn't make any difference.
I'd be very gratefull for some advice. Please HELP, this has been going on for ages. Thank you, in anticipation.

I'm SO very grateful for your help! Have downloaded it, and have started to use it, but havn't listened to results yet.(just about to) THANKYOU SO MUCH.
Thankyou so much again, this could be the end of a long (negative) era!
A bit later: have listened to a little, seems a huge amount better. will update when used properley.
I'm anticipating some being way out. Though it says it can overcome old changed volume levels, is it best in your opinion, to put them back to original setting?
Many Best Wishes Vonnie

1020 There is no lock for ringer volume level, but...

Earlier today I posted in this Community regarding the Subject issue. Received good reply and marked it as a Solution. Had additional thoughts so I'm doing this new Post. Same Subject as before. I had asked if it's possible to LOCK the ring volume, at 10 for example, it's loudest, so I can hear it ring no matter what. I've been unpleasently surprised several times when my ringer rings BUT the volume is much much lower, way too low (2 or 3 maybe), way lower from where I had set it, up at (10). So then, I immediately adjust the volume back to 10, where I want it to stay, always. The volume up and down rocker button works fine. Problem is, the unexpexted, surprising and unwanted way very low ringer volume that causes me to MISS SOME CALLS. I have four kids. As a parent, missing calls can be a SERIOUS matter. If I could LOCK my ringer volume at 10 then I'll be happier. For me, thr parent, this tricky too low ringer volume problem is more than an annoying tech glich. What causes this problem, you may ask? The volume goes down without wanting it to do that because that while the phone is unlocked and in any kind of use or even while it is in screen lock mode, the very handling of the phone will sometimes unintendedly, unknowingly, without noticing it, press the down volume part of the volume rocker buttom. After all, the down volume part of the rocker button is the located at the lower end of that rocker and is closer to the center of the phone and close to the power button. That's right where anybody normally holds and works the phone, right there. AND worse yet, it takes only a little bit of pressure to accidently push the down volume rocker button. No wonder the down volume button unwillingly gets pressed alot. Also, unwanted down volume change, by pressing of the volume button, can happen in many ways such as in a pocket, carrying it in your hand, passing the phone around, lots of ways. This unwanted down volume change can and does happen on the 1020 while calling, texting, using apps and even during the screen lock mode, and that is with or without the pass code feature enabled. Only time this can't happen is when the phone is completely off and dark. I've searched the posts and don't find anyone else saying this. That doesn't mean it's not a real problem, like for us parents and others. But I know that what I say is correct, to my knowledge, because today an MS WP Community Moderator and also a Lumina Community contributor agreed with what I'm experiencing. This problem has always happened with my 1020 and my previous 920 always did exactly the same type of low volume TRICK. No updates are causing this problem along the way. It's just now that I got fed up enough to confirm within the Communities that there is NO WAY TO LOCK THE RINGER VOLUME on the 1020. I'm ranting about it to you fellow Lumina users. If you experience this, if it bugs you, if you agree that it's more than a mere tech glich nuisance, that it's causing missed calls for family and business, then please post in on this Lumina Community and demand a fix for it. I'm not a phone software expert but I'll bet that a minor software tweek followed by an update, is easily possible. This fix SHOULD be good for existing Lumina models, not just for future ones. I'm gonna work this. It can happen more surely and quickly if those Lumina users who share my concern will post about it. This post is not a critique nor does it infer defects in software or phones. I just want to peel a layer off this onion.
WJC

SonOfTheSouth wrote:
Also, unwanted down volume change, by pressing of the volume button, can happen in many ways such as in a pocket, carrying it in your hand, passing the phone around, lots of ways.
As far as the phone is locked, the volume key will not function .. so this should not affect the volume level.
SonOfTheSouth wrote:
I'm ranting about it to you fellow Lumina users. If you experience this, if it bugs you, if you agree that it's more than a mere tech glich nuisance, that it's causing missed calls for family and business, then please post in on this Lumina Community and demand a fix for it.
This being a User-to-User forum, what you suggest may not have the indended effect. But, you may add your vote HERE to the most appropriate 'feature request' ..

When I set all the tracks in the latest Garageband to the same volume levels and save, when I open the file again they've changed back to a previous setting?

I'm trying to mix a recording in the latest 2014 version of Garageband, but when I set all the tracks in the latest Garageband to the same volume levels and save, when I open the file again they've changed back to a previous setting? Does anyone know why it changes even after saving the file?
Below is my iMac settings.

Do you have a back up?
If not you're into using file recovery software like File Salvage - you can download a free trial and it will scan the disk for you and tell you with might be recoverable. Actual recovery will require that you purchase the app. There may be many files with the same or similar names. Always recover the largest file size.
There are other such apps. Search on Macupdate or the App Store

I locked my volume level, and forgot the code to unlock it, so how can i get my volume back to normal without a code??

About four years ago I set the volume lock on my ipod to half way up. To do that, you enter a four number code. I decided to change the code one day, and then ever since then i can not remember the code. I would like to remove my volume lock from half way, so that i can turn it up to max volume, but to do this it is asking for the old four number code, which i don't remember! So how can i take this volume lock off without knowing the code??? I tried to reset all settings, but that did not remove the volume lock. Please help me figure out how to achieve full volume level!
Thanks.

See here: Restoring iPod to factory settings
B-rock

Multiple key level associations

Hi,
I am getting the below error during the consistency check.
Table, X, has multiple key level associations.
Can anyone please let me know the reason for the same.
Also, when I drag the physical tables from the physical layer to the BMM Layer, there are some default primary keys in the Logical Table.What considerations does OBIEE take into when deciding upon the Primary Key in the Logical table.
Thanks in Advance
Akshatha

"can you check the keys foreign keys for those table "
You didn't mention what I should be checking for.
However, I think I've worked it out now.
I have a dimension table that is referenced by both other dimension tables and the fact tables. Therefore, when imported into BI, both the dimension tables and the fact tables have foreign keys to this common dimension table.
I'm guessing that the foreign keys on the dimension tables are not required - because there are foreign key references from the fact tables to the common table anyway. Bearing in mind that this is a star schema and not a snowflake schema.
=> I deleted all the foreign keys from all my dimension tables, and now the consistency check works ok.

Multiple volume levels on iPhone5

Similar Messages

Maybe you are looking for