Multiple vpn configuration help

Hi everyone,
I need help because I have to configure a router...I need to create lan-to-lan vpn,to create dynamic vpn and to configure the router to accept connection made with the vpn client software.I think that I should use "profiles",but I can't get the router work fine.Lan-to-lan vpn are OK,but I can't have dynamic vpn AND vpn client connections working fine (only one of the two).

Following link may help you
http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a00801dddbb.shtml

Similar Messages

WRVS4400N - Multiple Dynamic VPN Configurations?

Hello,
I am wondering if anyone knows whether or not the WRVS4400N supports more than one dynamic VPN configuration?
I am trying to get the WRVS4400N to let more than one TheGreenBow client to connect to it.....
Thank you,
A Read

Yes, you can configure multiple dynamic-to-static l2l on ASA. But for multiple connections using ezvpn will be much easier. Following links may help you
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00805733df.shtml

HT1695 Hello I was given an ipad from my mother because she bought her a newer ipad and I am having trouble connecting to my wifi due to needing to add vpn configuration. Can you please help me?

Hello I was given an ipad ios 5.1.1 from my mother she had purchased a newere version. I am unable to connect to my wifi due to needing to setup my vpn configuration. Can you please help me?

You haven't told us what you've tried to get the vpn working and what errors you may have encountered, so I'll just give a link to an overview of setting up vpn on a device...
http://support.apple.com/kb/HT1424?viewlocale=en_US&locale=en_US

Multiple ethernet network adaptors + MySQL/php5: configuration help needed

I would be grateful if someone could give me some advice on how to configure multiple ethernet adapters under OS X 10.5.6
I have set up my system to work nicely with two ethernet network adapters, each with its own fixed IP. This bit works just fine. The machine supports two separate servers - a mail server and the OS X Apache2 server. I have configured the mail server to only listen to one of the IPs, and the Apache2 server to listen to the other (via httpd.conf). The system also has MySQL and php5 installed / enabled, and these services are only used by the Apache2 server.
The problem I have is that when I start the machine, initially the php5 system cannot connect reliably to the MySQL database system. The fix I have found is to temporarily make the ethernet adapter connected to the mail server 'inactive'. While this is so, the php5/MySQL connection to Apache2 works. Curiously, once an initial connection between php5 and MySQL has been made, subsequently I can make the mail server's ethernet adapter active again without further problems.
I initially thought this might be due to 'service order' issues - but changing the service order (e.g. putting the Apache adapter 'above' the mail adapter in the service order does not help. The fix only works by making the mail adapter inactive temporarily.
I suspect that there is some configuration change I can make to clarify the setup I have. The MySQL and Apache installations only need to talk to the Apache server - but I am not sure how to record this configuration in the OS X system.
Thanks in advance for any assistance that you can provide.
Message was edited by: Gavin Lawrie

Hi Stepehen,
Did the configuration as per your advice but i am getting the below mentioned error which i have highlighted it in red. Please advice what needs to be done.
Home
Re: 1941W configuration help needed
created by Stephen Rodriguez in Getting     Started with Wireless - View the full discussion
conf t
interface     Dot11Radio0
no ssid     Cisco_Kamran_BGN
no encryption mode     ciphers aes-ccm
exit
interface     Dot11Radio1
no encryption mode     ciphers aes-ccm
no ssid     Cisco_Kamran_A
exit
dot11 ssid     Cisco_Kamran_A
vlan 10
dot11 ssid     Cisco_Kamran_BGN
vlan 11
exit
interface     Dot11Radio0
encryption vlan 11     mode ciphers aes
ssid     Cisco_Kamran_BGN
exit
interface     dot11radio0.1
encapsulation     dot1q 1 native
bridge-group 1
interface     dot11radio 0.11
encapsulation     dot1q 11
bridge-group 11
Configuration of     subinterfaces and main interface
within the same bridge     group is not permitted
exit
interface     Dot11Radio1
encryption vlan 10     mode ciphers aes-ccm
ssid     Cisco_Kamran_A
interface     dot11radio1.1
encapsulation     dot1q 1 native
bridge-group 1
interface     dot11radio1.10
encapuslation     dot1q 10
bridge-group 10
Configuration of subinterfaces and main     interface
within the same bridge     group is not permitted
end
wr
Reply to this message by going to Home
Start a new discussion in Getting Started with Wireless at Home

Cisco 2800 - Multiple VPNs Using Virtual-Template

Hello List,
I have a question related to the way of setting up multiple VPNs using
virtual-template configuration (Cisco calls this Dynamic VPN): how can
I make my configuration to be a "spoke" type VPN rather than "hub" type
without using "crypto map" on the physical interface?
Here is how it works now (the VPN hub config):
!!! the VPN hub config
crypto keyring PSKs
pre-shared-key address <peer_ip> key 6 ************
crypto isakmp profile ISAKMP_Profile
keyring PSKs
self-identity address
match identity address <peer_ip> 255.255.255.255
virtual-template 1
crypto ipsec transform-set Transform_Set esp-3des esp-md5-hmac
crypto ipsec profile IPSEC_Profile
set transform-set Transform_Set
set isakmp-profile ISAKMP_Profile
interface Loopback1007
description This is a public IP address from a range routed via my
gatey IP address (see bellow)
ip address <my_VPN-hub_ip> 255.255.255.255
no ip redirects
interface Multilink1
description This is my gateway IP address facing the ISP
ip address <my_public_IP> 255.255.255.252
no ip redirects
no ip unreachables
ip nbar protocol-discovery
ip nat outside
ip virtual-reassembly
rate-limit input access-group 102 8000 1500 2000 conform-action
transmit exceed-action drop
ip route-cache flow
no cdp enable
ppp multilink
ppp multilink fragment delay 20
ppp multilink interleave
ppp multilink group 1
ppp multilink multiclass
service-policy output qos_pm-outbound
interface Serial0/0/0
description 1st Serial Interface to ISP
bandwidth 2048
no ip address
encapsulation ppp
ip route-cache flow
no fair-queue
ppp multilink
ppp multilink group 1
interface Serial0/0/1
description 2nd Serial Interface to ISP
bandwidth 2048
no ip address
encapsulation ppp
ip route-cache flow
no fair-queue
ppp multilink
ppp multilink group 1
interface Virtual-Template1 type tunnel
ip unnumbered Loopback1007
ip access-group vpn_acl-tunnel-encr-in in
ip access-group vpn_acl-tunnel-encr-out out
ip mtu 1400
ip route-cache flow
tunnel source Loopback1007
tunnel mode ipsec ipv4
tunnel sequence-datagrams
tunnel checksum
tunnel path-mtu-discovery
tunnel protection ipsec profile IPSEC_Profile
service-policy output qos_pm-VPN
ip access-list extended vpn_acl-tunnel-encr-in
permit ip 172.20.40.0 0.0.0.255 192.168.2.0 0.0.0.255
ip access-list extended vpn_acl-tunnel-encr-out
permit ip 192.168.2.0 0.0.0.255 172.20.40.0 0.0.0.255
!!! the Spoke VPN is configured by my peers (Cisco routers, PIXes,
Cisco VPN concentrators)
!!! all follow the standard crypto map config on the physical
interface.
!!! i.e. http://www.vpnc.org/InteropProfiles/cisco-ios.txt
It is obvious that with my router configured as a VPN hub, if the
tunnel dies, I need to wait for the peer to reset the tunnel, all this
time my clients in my network are not able to access the remote sites.
The reason to use the virtual-template interfaces as suppose to
traditional "crypto map" way, is that my peers do not want to share the
same VPN end-point between themselves (different companies all
together) and they are very strict in regards to ACLs. As I don't have
a VPN device for each one of them and their number increases (I have 5
separate tunnels right now with a potential grow to 15 in the next 3
months), I need to find a way to get rid of the hub config in my end (I
did not have much choice there when I migrated to this platform from a
linux box).
Pros for the Virtual-Template:
- separate QoS for each tunnel
- ACLs configured directly on the tunnel interface (grater flexibility)
- tunnel end-point IP address can be part of a range BGP advertised via
multiple ISP links
Cons:
- hub config, the tunnel needs to be reseted by the peer
Any help is very much appreciated. Thank you,
Adrian

Hope the following link will help you
http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a008019d6f7.shtml

How to create multiple pof configuration files for c# client

Is there a way to have multiple pof files for c# coherence client?
Can I create a file called my-pof-config.xml with the following line...
<pof-config xmlns="http://schemas.tangosol.com/pof">
<user-type-list>
<include>assembly://Coherence/Tangosol.Config/coherence-pof-config.xml</include>
<include>file://pof-config.xml</include>
and here is what pof-config.xml file look like
<?xml version="1.0" encoding="UTF-8"?>
<pof-config xmlns="http://schemas.tangosol.com/pof">
<user-type-list>
In my C# visual studio project, this is where I load my-pof-config.xml in app.config
<coherence>
<cache-factory-config>coherence.xml</cache-factory-config>
<cache-config>coherence-cache-config.xml</cache-config>
<pof-config>my-pof-config.xml</pof-config>
</coherence>
and this is what I saw in the log...
2012-02-23 14:35:35,529 DEBUG Coherence (null) - 2012-02-23 14:35:35.529 level(thread=System.Threading.Thread): Loaded POF configuration from "FileResource(Uri = file://my-pof-config.xml, AbsolutePath = D:\worktrees\ads\mainline\v2\ads\demos_cs\build\my-pof-config.xml)"
2012-02-23 14:35:35,545 DEBUG Coherence (null) - 2012-02-23 14:35:35.545 level(thread=System.Threading.Thread): Loaded included POF configuration from "EmbeddedResource(Uri = assembly://Coherence/Tangosol.Config/coherence-pof-config.xml, AbsolutePath = assembly://Coherence/Tangosol.Config/coherence-pof-config.xml)"
2012-02-23 14:35:35,623 DEBUG Coherence (null) - 2012-02-23 14:35:35.623 level(thread=ExtendTcpCacheServiceCSharp:TcpInitiator): Loaded POF configuration from "FileResource(Uri = file://my-pof-config.xml, AbsolutePath = D:\worktrees\ads\mainline\v2\ads\demos_cs\build\my-pof-config.xml)"
I don't see pof-config.xml is loaded at "Loaded included POF configuration....". How do I get around it so I can load multiple pof configuration files for c# client?

Hi,
Not sure about C# but I would suggest try removing file:// from
<include>file://pof-config.xml</include>and keep pof-config.xml and my-pof-config.xml in the same directory.
Hope this helps!
Cheers,
NJ

Multiple runtime configurations

Hi,
I'd like to set up multiple runtime configurations on a project. i.e. I want to be able to run the same java class with multiple program arguments or virtual machines. Is there any way I can do this without creating a separate project or using <target> in an ant file?
Thanks in advance for any help,
Venura

Hi Venura,
You can do this in Project Properties. On the Profiles page, click New... to create a new profile. You can change many of the runtime settings associated with the project for each individual profile.
Thanks,
Brian
JDev Team

L2L vpn routing help

Hi everybody,
I'm using ASA 5510
I have two inside interfaces
my end
outside: a.a.a.a
inside1 : b.b.b.b/24
inside2 : c.c.c.c/24
other end
outside: d.d.d.d
inside : e.e.e.e/29
There is tunnel established between b.b.b.b/24 and e.e.e.e/29
I'd like to route the network from c.c.c.c/24 to e.e.e.e/29 and back using the same tunnel.
Is that possible? if so how do I go about it?
Point to those who help me solve this

Aaron
Perhaps I did not understand your requirements as well as I thought that I did. So let me try again, starting from a slightly different perspective. If I get off track with my understanding I hope you will supply appropriate corrections.
What I think I understand is that you have an ASA and that network c.c.c.0 is on the inside of that ASA. You want traffic from c.c.c to go to network e.e.e.0 which is behind some ASA/router device which has a VPN site to site tunnel set up to your ASA to provide connectivity for network b.b.b.0.
The first thing to understand is that a second tunnel is really not an option. Your ASA can certainly support multiple VPN tunnels - as long as they each go to different destinations. But two tunnels from the same ASA to the same destination does not work.
So you basically have two options: your ASA can route traffic from c.c.c out through the outside interface and in the clear trying to get to e.e.e. Depending on whether these are public addresses or private addresses it might work or it might not work. But I do not think that this is the option that you want. The other option is to send that traffic through the existing tunnel. And the way to get that traffic through the existing tunnel is to add c.c.c to the access list. (and there might be a few other things like whether or not to translate the traffic).
There is an aspect to this that you might not realize and perhaps this may help you to feel better about this solution. Right now your ASA negotiates an IPSec Security Association with b.b.b.b as local proxy. If you add c.c.c.c into the tunnel then IPSec will negotiate an additional Security Association with the new SA having c.c.c.c as the local proxy.
HTH
Rick

RV042 basic VPN configuration

Hello there. I'm just wondering on how to use his RB042 VPN ROUTER. Can anyone help on how to setup the VPN?I'm kinda confused. What is the first thing to do until the last?
Posted by WebUser Al Albiar Taposok

Did you try google 'RV042 VPN configuration'?. It popped up with lot of step-by-config docs. if still can't find, PM me your email, i will send you one.
Thx
MS

Cisco sr520 VPN configuration and deployment

Hope one of the cisco genius' can help me out. I have a small business with one sr520 edge router. The network is up and running fine but I need to allow remote users to connect back to a vpn at the office in order to access user winxp Pcs using RDP remotedesktop.
I have searched the web and cisco forums and see there are quite a few vpn configurations but I found no clear setup guide for accomplishing what I understood to be pretty simple. "allow 5 outside users to connect back to the office and work as if they were sitting in the office"
Question:
1. What client software is needed on the remote client pc to connect back back to the sr520 vpn? Can I use the windows pptp vpn client or the built-in Mac client?
2. My router shows three items labeled vpn. VPN remote, VPN Server and SSL VPN...i have tweaked each of these screens but still not been able to connect an outside client. Is there a setup guide to explain the features of this router and how to use it.
3. after poking around the Cisco site for a vpn client i am wondering why do I need a support contract to use a feature of a router I just bought? Does Firmware and client software cost extra?
Thanks for any assistance you can offer...
Kevin Hall
Houston Tx

Hi,
Some users have reported that IPSecuritas works well with the Cisco Small Business routers.
http://www.lobotomo.com/products/IPSecuritas/
For the RV180 I would try to adapt the SA500 tutorial to make it work:
http://www.cisco.com/en/US/docs/security/multi_function_security/multi_function_security_appliance/sa_500/technote/note/SA500_mac_appnote.pdf
Please note that this client is not supported by Cisco. If you have questions or issues, please post here on the forum.
- Marty

I've got 2 phones an iphone 3gs and i updated it to an ios 6 also an android phone since updating my iphone 3gs to ios 6 it wont let me add vpn configuration or set up internet tethering/ personal hotspot or portable wi-fi

I've got 2 phones an iphone 3gs i updated it to an ios 6 also an android phone since updating my iphone 3gs to ios 6 it wont let me connect or add vpn configuration or set up internet tethering/ portable hotspot or portable wi-fi but i have no problems connecting or adding my android phone to tethering or portable hotspot

http://support.apple.com/kb/HT4517
http://support.apple.com/kb/TS2756
if those two links don't help then contact your phone carrier.

Deleting a VPN Configuration

On page 91 of the iPod Touch 2.0 User Guide (found here - http://manuals.info.apple.com/enUS/iPod_touch_2.0_UserGuide.pdf), to delete a VPN it reads:
"Delete a VPN configuration: Choose General > Network > VPN, tap the blue arrow
to the right of the configuration name, and tap Delete VPN at the bottom of the
configuration screen."
However there is not a "Delete VPN" button is not at the bottom of the configuration screen. What can I do to delete a VPN? I appreciate any help, thanks!
Joshua

wanted to clarify some stuff -
ipod touch has never been jailbroken.
Installed the Cisco VPN (through my University) this morning.
I can create a new VPN configuration, and then the "Delete VPN" button is there to delete it.
But for some reason I cannot delete the Cisco VPN. As in the previous post, the "Delete VPN" button is no where to be found. hopefully that helps

HOW TO - Create new from clipboard and process multiple files - please help

Need help - have new version of photoshop on trial only ATM...
Want to know - HOW TO:
1. Create new from clipbaord
2. Process multiple files
Please help.

For clipboard copy, I start with File > New and the size will be set to what's in the clipboard. Then once the new file is opened, Edit > Paste will place the clipboard contents as a layer in the new document.
You must remember to use the command Layer > Flatten Image of you want to save as jpeg or any other file format that doesn't support layers.
For processing multiple files,
File > Automate > Batch or
File > Scripts > Image Processor...
Check the User guide or google information for those commands if you have specific needs.
Gene

1941W configuration help needed

Our Deployment Scenario:-
1941W Gigabit Ethernet 0/0 is connected to the PPOE connection of the ISP.
Gigabit Ethernet 0/1 is connected to the wired LAN
I have created 2 wireless radio Cisco_Kamran_BGN which is operating at 2.4 Ghz Devices and Cisco_Kamran_A which is operating at 5Ghz Devices.
I have created 2 VLans for the Wireless.
Vlan 10 for Cisco_Kamran_A        192.168.10.x
Vlan 11 for Cisco _Kamran_BGN   192.168.11.X
The problem is the Wireless users are not getting the IP address from the respective DHCP server which has been configured on the Router.
Can please any from the community help me and show me where I am missing the configuration.
Please find my router & ap configuration below.
Router Configuration
Router#
sh run
Building configuration...
Current configuration : 3022 bytes
! No configuration change since last restart
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname Router
boot-start-marker
boot-end-marker
enable secret 5 $1$TdQt$npYeaf/W0kRElcfMggzJ31
no aaa new-model
service-module wlan-ap 0 bootimage autonomous
no ipv6 cef
ip source-route
ip cef
ip dhcp excluded-address 192.168.1.1 192.168.1.50
ip dhcp excluded-address 192.168.10.1 192.168.10.10
ip dhcp excluded-address 192.168.11.1 192.168.11.10
ip dhcp pool DHCP
network 192.168.1.0 255.255.255.0
default-router 192.168.1.1
dns-server 195.229.241.222 213.42.20.20
ip dhcp pool Cisco_Kamran_A
network 192.168.11.0 255.255.255.0
default-router 192.168.11.1
dns-server 195.229.241.222 213.42.20.20
ip dhcp pool Cisco_Kamran_BGN
network 192.168.10.0 255.255.255.0
default-router 192.168.10.1
dns-server 195.225.241.222 213.42.20.20
multilink bundle-name authenticated
crypto pki token default removal timeout 0
license udi pid CISCO1941W-E/K9 sn FCZ1553C1VK
hw-module ism 0
redundancy
bridge irb
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
ip address 192.168.1.1 255.255.255.0
ip nat inside
ip virtual-reassembly in
duplex auto
speed auto
interface wlan-ap0
description Service module interface to manage the embedded AP
ip unnumbered GigabitEthernet0/0
arp timeout 0
no mop enabled
no mop sysid
interface GigabitEthernet0/1
no ip address
duplex auto
speed auto
pppoe enable group global
pppoe-client dial-pool-number 1
interface Wlan-GigabitEthernet0/0
description Internal switch interface connecting to the embedded AP
switchport mode trunk
no ip address
interface Vlan1
no ip address
interface Vlan10
ip address 192.168.10.1 255.255.255.0
ip access-group DSL_ACCESSLIST in
ip nat inside
ip virtual-reassembly in
interface Vlan11
ip address 192.168.11.1 255.255.255.0
ip access-group DSL_ACCESSLIST in
ip nat inside
ip virtual-reassembly in
interface Dialer1
ip address negotiated
ip nat outside
ip virtual-reassembly in
encapsulation ppp
dialer pool 1
ppp authentication pap callin
ppp pap sent-username xxxxxx password 0 xxxxxx
ppp ipcp route default
ip forward-protocol nd
no ip http server
no ip http secure-server
ip nat inside source list DSL_ACCESSLIST interface Dialer1 overload
ip access-list extended DSL_ACCESSLIST
permit ip 192.168.0.0 0.0.255.255 any
control-plane
line con 0
password xxxxxx
login
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line 67
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
line vty 0 4
password xxxxxx
login
transport input all
scheduler allocate 20000 1000
end
Router#
Router#
Router#
Access Point Configuration
ap#
ap#
ap#
sh run
Building configuration...
Current configuration : 2603 bytes
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname ap
enable secret 5 $1$JxdQ$a2/00bWJuhUKP9QLC94YD/
no aaa new-model
dot11 syslog
dot11 ssid Cisco_Kamran_A
   authentication open
   authentication key-management wpa
   guest-mode
   wpa-psk ascii 7 1045081417161C5A555C7A7B
dot11 ssid Cisco_Kamran_BGN
   authentication open
   authentication key-management wpa
   guest-mode
   wpa-psk ascii 7 020D05561907017015165949
username Cisco password 7 14341B180F0B
bridge irb
interface Dot11Radio0
description 802.11bgn radio
no ip address
no ip route-cache
encryption mode ciphers aes-ccm
broadcast-key change 3600
ssid Cisco_Kamran_BGN
antenna gain 0
station-role root
bridge-group 11
bridge-group 11 subscriber-loop-control
bridge-group 11 block-unknown-source
no bridge-group 11 source-learning
no bridge-group 11 unicast-flooding
bridge-group 11 spanning-disabled
interface Dot11Radio1
description 802.11a radio
no ip address
no ip route-cache
encryption mode ciphers aes-ccm
ssid Cisco_Kamran_A
antenna gain 0
no dfs band block
channel dfs
station-role root
bridge-group 10
bridge-group 10 subscriber-loop-control
bridge-group 10 block-unknown-source
no bridge-group 10 source-learning
no bridge-group 10 unicast-flooding
bridge-group 10 spanning-disabled
interface GigabitEthernet0
description the embedded AP GigabitEthernet 0 is an internal interface connecting AP with the host router
no ip address
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface GigabitEthernet0.10
description 802.11a bridge
encapsulation dot1Q 10
no ip route-cache
bridge-group 10
bridge-group 10 subscriber-loop-control
bridge-group 10 block-unknown-source
no bridge-group 10 source-learning
no bridge-group 10 unicast-flooding
bridge-group 10 spanning-disabled
interface GigabitEthernet0.11
description 802.11bgn bridge
encapsulation dot1Q 11
no ip route-cache
bridge-group 11
bridge-group 11 subscriber-loop-control
bridge-group 11 block-unknown-source
no bridge-group 11 source-learning
no bridge-group 11 unicast-flooding
bridge-group 11 spanning-disabled
interface BVI1
ip address dhcp client-id GigabitEthernet0
no ip route-cache
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
bridge 1 route ip
line con 0
no activation-character
line vty 0 4
login local
end
ap#
ap#
ap#

Hi Stepehen,
Did the configuration as per your advice but i am getting the below mentioned error which i have highlighted it in red. Please advice what needs to be done.
Home
Re: 1941W configuration help needed
created by Stephen Rodriguez in Getting     Started with Wireless - View the full discussion
conf t
interface     Dot11Radio0
no ssid     Cisco_Kamran_BGN
no encryption mode     ciphers aes-ccm
exit
interface     Dot11Radio1
no encryption mode     ciphers aes-ccm
no ssid     Cisco_Kamran_A
exit
dot11 ssid     Cisco_Kamran_A
vlan 10
dot11 ssid     Cisco_Kamran_BGN
vlan 11
exit
interface     Dot11Radio0
encryption vlan 11     mode ciphers aes
ssid     Cisco_Kamran_BGN
exit
interface     dot11radio0.1
encapsulation     dot1q 1 native
bridge-group 1
interface     dot11radio 0.11
encapsulation     dot1q 11
bridge-group 11
Configuration of     subinterfaces and main interface
within the same bridge     group is not permitted
exit
interface     Dot11Radio1
encryption vlan 10     mode ciphers aes-ccm
ssid     Cisco_Kamran_A
interface     dot11radio1.1
encapsulation     dot1q 1 native
bridge-group 1
interface     dot11radio1.10
encapuslation     dot1q 10
bridge-group 10
Configuration of subinterfaces and main     interface
within the same bridge     group is not permitted
end
wr
Reply to this message by going to Home
Start a new discussion in Getting Started with Wireless at Home

Question: Best practices for dealing with multiple AM configurations

Hello all,
I have a project using ADF Business Components and ADF Faces. I would like to set up multiple configurations for the Application Modules to support the following scenarios:
1). Local testing and debugging - using a connection defined in JDeveloper and AM Pooling turned off.
2). Testing and debugging on an application server - using a JDBC Data Source and AM Pooling turned off
3). Production deployment - using a JDBC Data Source and AM Pooling turned on.
It is no problem to create multiple AM configurations to reflect this scenario. In order for the web part of the application to use the correct configurations, the DataBindings.cpx file must specify the correct ones. I was thinking to have 3 different DataBindings.cpx files and to change the CpxFileName context-param in the web.xml file as needed.
My questions:
1). Does this make sense as an approach? It should be better than having to change a single AM configuration every time I deploy or test. Is there any easy way to keep multiple DataBIndings.cpx files in synch, given that we may add new pages from time-to-time? Alternatively, can we do some type of "include" processing to include just the dataControlUsages section into a common DataBindings.cpx file?
2). How would you manage the build-and-deploy process? For the most part, in JDev we would be using configuration #1. The only time to switch to configuration #2 or #3 would be to build an EAR file for deployment. Is this something that it would make sense to accomplish with ANT? I'm not an ANT expert at all. The ANT script would have "build-test-ear" and "build-prod_ear" targets which would swap in a correct web.xml file, recompile everything, build the EAR, then put the development web.xml file back. I'm relatively sure this is possible... comments?
3). Is there some other recommended approach?
I appreciate any insights from experience, or even just ideas or thoughts that I can test out.
Best regards,
John

Hi K,
Sorry for the long long delay in responding I've been traveling - and thanks for the e-mail tickler too...
To answer your question in short, I do think that ANT is the right way to go; there is an extra ANT task called XMLTask that I was able to download and play with, and it seems it would make this manipulation of the cpx file (or the xcfg file, for that matter) pretty straightforward. I don't have any code to post; it's just in the conceptual stage for me right now. I didn't see anything magical in JDev 11 TP3 that solved this problem for me either.
Having said all of that, it's more complicated than it might appear. In addition to the DataBindings.cpx file (stores, among other things, which AM configuration to use for each data control), it's certainly possible to programmatically access an AM (specifying the configuration either directly in the code or via a properties file/etc). I'm not sure what the most common use case for AM configurations is, but in my case, I have a Test configuration and a Prod configuration. The Test config, among other things, disables AM pooling. When I am developing/testing, I always use the Test config; in Production, I always use the Prod config. Perhaps the best way for me to do this would be to have an "Active" config and use ANT tasks to copy either Test or Prod to "Active." However, our Subversion repository is going to have a few complaints about this.
John

Multiple vpn configuration help

Similar Messages

Maybe you are looking for