Multiple Vulnerabilities in Cisco ASA Software - Adivisory ID
Hello,
looking at this advisory: http://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20141008-asa, in Software Versions and Fixes table all fixes releases are interim ones while mine is an ED release (9.1.5). Do you think I have to upgrade to the adviced interim release 9.1(5.12) ?
Thanks
If you're running a 5500 series and require a fix now then, yes - 9.1(5.12) is the version you should upgrade to.
You could also examine each vulnerability for applicability to your configuration and either decide it is not applicable or critical and/or implement compensating controls outside the ASA itself.
Finally, you could also accept the risk and leave your system unpatched.
Similar Messages
-
Multiple Vulnerabilities in Cisco ASA Software Upgrade
Hello,
Has anyone upgraded their ASA's IOS to the recommended version as mentioned in this link -->
http://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20131009-asa?
I have upgrade my 8.2 & 8.6 softwares to the new release versions (as recommended by Cisco), but whenever I use the reload command, my I get the following error:
*** --- START GRACEFUL SHUTDOWN ---
Shutting down isakmp
Shutting down webvpn
Shutting down sw-module
Shutting down File system
*** --- SHUTDOWN NOW ---
Write failed: Broken pipe
Any ideas as to why this is happening and any suggestions to answer this issue?
Thanks,
ArunWe will need to investigate this further.
Allow me sometime or if it is urgent please open a TAC case.
Mike -
What's the difference between 8.0 and 9.3 Cisco ASA software?
Is anyone show me the link with features of 8.0 and 9.3 Cisco ASA software? And what's the catch?
9.2(2.8) is what is known as an interim release of the software. Per Cisco interim release notes:
"They contain bug fixes which address specific issues found since the last Feature or Maintenance release. The images are fully supported by Cisco TAC and will remain on the download site only until the next Maintenance release is available. If you do not have a specific problem which is resolved by an Interim release, we recommend that you use the Feature or Maintenance release images.
Important: These images were not fully regression tested. Each individual fix was unit tested, and the image has had a limited amount of automated regression testing to confirm a baseline of functionality. Keep this testing status in mind if you decide to run them in a production environment. We strongly encourage you to upgrade to a fully tested Maintenance or Feature release when it becomes available."
Interim release notes are not generally published on the general product support page but if you go to the downloads page, there is usually a link to the release notes specific to the interim release.
Here is a link to the ASA 9.2(2.9) interim release notes. They describe the individual bug fixes rolled up in that release. -
Multiple Vulnerabilities in Cisco Unified Communications Manager Question
Hi All I'm running CUCM System version: 8.6.1.20000-1 and I'm trying to determine if I'm affected by this vulnerability.
http://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20130717-cucm
The above URL says that it affects 8.6(x) but when I read the "readme" file it says:
This package will install on the following System Versions:
-7.1.3.10000-xx or any higher version starting with 7.1.3.xxxxx
-7.1.5.10000-xx or any higher version starting with 7.1.5.xxxxx
-8.5.1.10000-xx or any higher version starting with 8.5.1.xxxxx
-8.6.2.10000-xx or any higher version starting with 8.6.2.xxxxx
-9.1.1.10000-xx or any higher version starting with 9.1.1.xxxxx
http://www.cisco.com/web/software/282204704/18582/ReadmeForBlindSQLinjectionCOPfile.pdf
Is 8.6.1 excluded from this patch? Should I not worry?
I'm a little confused...
Thanks,
DanHi Dan,
The way I read this is, that you are vulnerable but they
didn't build a patch for your version I would go ahead
and open a TAC case here just to be safe.
Cheers!
Rob
"I don't know how, I don't know when
But you and I will meet again "
- Tom Petty -
Cisco ASA 5505 not able to access flash
Hi All:
I have searched and searched all over the net for an answer to this question and have decided to just post it. I have a 5505 that was given to me by my job to use for working on my CCNA Sec. cert and did the following:
I plugged it in and booted it up just fine. Made config changes as I followed along with the examples in my CCNA Security book. Got to the point in chapter 14 where the initial setup happens to configure it for working with ASDM. I never did a write mem on it and decided to take it back to square one by unplugging it to allow it to lose the changes that I made. This is where things got ugly.
When it booted back up it got stuck in a bootup loop and couldn't find an IOS. After following all kinds of steps to boot to rommon and tftp another IOS and such (several times) I decided to follow another posting that said that the flash could be corrupted and to just delete it and start anew. Did that and through rommon as it would not boot up normally any more. After trying this over and over for the last couple hours I realized that it would boot from tftp so I did that in hopes of fixing the flash issue.
I've tried deleting it, and re-initializing it and formating it. But the thing is that it no longer SEES the disk0: mount point. I've used two different flash cards...the one that came with it and the one that I already had. With the cover off I can see that there is no activity light next to the flash drive when I issue a delete or initialize or format command.
Here is a copy of some of the output file. Any help or suggestions are greatly appreciated.
CISCO SYSTEMS
Embedded BIOS Version 1.0(12)11 04/30/08 15:45:41.19
Low Memory: 632 KB
High Memory: 507 MB
PCI Device Table.
Bus Dev Func VendID DevID Class Irq
00 01 00 1022 2080 Host Bridge
00 01 02 1022 2082 Chipset En/Decrypt 11
00 0C 00 1148 4320 Ethernet 11
00 0D 00 177D 0003 Network En/Decrypt 10
00 0F 00 1022 2090 ISA Bridge
00 0F 02 1022 2092 IDE Controller
00 0F 03 1022 2093 Audio 10
00 0F 04 1022 2094 Serial Bus 9
00 0F 05 1022 2095 Serial Bus 9
Evaluating BIOS Options ...
Launch BIOS Extension to setup ROMMON
Cisco Systems ROMMON Version (1.0(12)11) #4: Thu May 1 14:50:05 PDT 2008
Platform ASA5505
Use BREAK or ESC to interrupt boot.
Use SPACE to begin boot immediately.
Ethernet0/0
MAC Address: 0023.339e.2a91
Link is UP
Please set ADDRESS Variable.
Please set SERVER Variable.
Please set IMAGE Variable.
Launching BootLoader...
Default configuration file contains 1 entry.
Boot mode is 1. Default entry is 1.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
Default configuration file contains 1 entry.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
Failsafe booting engaged.
Default configuration file contains 1 entry.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
CISCO SYSTEMS
Embedded BIOS Version 1.0(12)11 04/30/08 15:45:41.19
Low Memory: 632 KB
High Memory: 507 MB
PCI Device Table.
Bus Dev Func VendID DevID Class Irq
00 01 00 1022 2080 Host Bridge
00 01 02 1022 2082 Chipset En/Decrypt 11
00 0C 00 1148 4320 Ethernet 11
00 0D 00 177D 0003 Network En/Decrypt 10
00 0F 00 1022 2090 ISA Bridge
00 0F 02 1022 2092 IDE Controller
00 0F 03 1022 2093 Audio 10
00 0F 04 1022 2094 Serial Bus 9
00 0F 05 1022 2095 Serial Bus 9
Evaluating BIOS Options ...
Launch BIOS Extension to setup ROMMON
Cisco Systems ROMMON Version (1.0(12)11) #4: Thu May 1 14:50:05 PDT 2008
Platform ASA5505
Use BREAK or ESC to interrupt boot.
Use SPACE to begin boot immediately.
Ethernet0/0
MAC Address: 0023.339e.2a91
Link is UP
Please set ADDRESS Variable.
Please set SERVER Variable.
Please set IMAGE Variable.
Launching BootLoader...
Default configuration file contains 1 entry.
Boot mode is 1. Default entry is 1.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
Default configuration file contains 1 entry.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
Failsafe booting engaged.
Default configuration file contains 1 entry.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
CISCO SYSTEMS
Embedded BIOS Version 1.0(12)11 04/30/08 15:45:41.19
Low Memory: 632 KB
High Memory: 507 MB
PCI Device Table.
Bus Dev Func VendID DevID Class Irq
00 01 00 1022 2080 Host Bridge
00 01 02 1022 2082 Chipset En/Decrypt 11
00 0C 00 1148 4320 Ethernet 11
00 0D 00 177D 0003 Network En/Decrypt 10
00 0F 00 1022 2090 ISA Bridge
00 0F 02 1022 2092 IDE Controller
00 0F 03 1022 2093 Audio 10
00 0F 04 1022 2094 Serial Bus 9
00 0F 05 1022 2095 Serial Bus 9
Evaluating BIOS Options ...
Launch BIOS Extension to setup ROMMON
Cisco Systems ROMMON Version (1.0(12)11) #4: Thu May 1 14:50:05 PDT 2008
Platform ASA5505
Use BREAK or ESC to interrupt boot.
Use SPACE to begin boot immediately.
Ethernet0/0
MAC Address: 0023.339e.2a91
Link is UP
Please set ADDRESS Variable.
Please set SERVER Variable.
Please set IMAGE Variable.
Launching BootLoader...
Default configuration file contains 1 entry.
Boot mode is 1. Default entry is 1.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
Default configuration file contains 1 entry.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
Failsafe booting engaged.
Default configuration file contains 1 entry.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
CISCO SYSTEMS
Embedded BIOS Version 1.0(12)11 04/30/08 15:45:41.19
Low Memory: 632 KB
High Memory: 507 MB
PCI Device Table.
Bus Dev Func VendID DevID Class Irq
00 01 00 1022 2080 Host Bridge
00 01 02 1022 2082 Chipset En/Decrypt 11
00 0C 00 1148 4320 Ethernet 11
00 0D 00 177D 0003 Network En/Decrypt 10
00 0F 00 1022 2090 ISA Bridge
00 0F 02 1022 2092 IDE Controller
00 0F 03 1022 2093 Audio 10
00 0F 04 1022 2094 Serial Bus 9
00 0F 05 1022 2095 Serial Bus 9
Evaluating BIOS Options ...
Launch BIOS Extension to setup ROMMON
Cisco Systems ROMMON Version (1.0(12)11) #4: Thu May 1 14:50:05 PDT 2008
Platform ASA5505
Use BREAK or ESC to interrupt boot.
Use SPACE to begin boot immediately.
Ethernet0/0
MAC Address: 0023.339e.2a91
Link is UP
Please set ADDRESS Variable.
Please set SERVER Variable.
Please set IMAGE Variable.
Launching BootLoader...
Default configuration file contains 1 entry.
Boot mode is 1. Default entry is 1.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
Default configuration file contains 1 entry.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
Failsafe booting engaged.
Default configuration file contains 1 entry.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
CISCO SYSTEMS
Embedded BIOS Version 1.0(12)11 04/30/08 15:45:41.19
Low Memory: 632 KB
High Memory: 507 MB
PCI Device Table.
Bus Dev Func VendID DevID Class Irq
00 01 00 1022 2080 Host Bridge
00 01 02 1022 2082 Chipset En/Decrypt 11
00 0C 00 1148 4320 Ethernet 11
00 0D 00 177D 0003 Network En/Decrypt 10
00 0F 00 1022 2090 ISA Bridge
00 0F 02 1022 2092 IDE Controller
00 0F 03 1022 2093 Audio 10
00 0F 04 1022 2094 Serial Bus 9
00 0F 05 1022 2095 Serial Bus 9
Evaluating BIOS Options ...
Launch BIOS Extension to setup ROMMON
Cisco Systems ROMMON Version (1.0(12)11) #4: Thu May 1 14:50:05 PDT 2008
Platform ASA5505
Use BREAK or ESC to interrupt boot.
Use SPACE to begin boot immediately.
Ethernet0/0
MAC Address: 0023.339e.2a91
Link is UP
Please set ADDRESS Variable.
Please set SERVER Variable.
Please set IMAGE Variable.
Launching BootLoader...
Default configuration file contains 1 entry.
Boot mode is 1. Default entry is 1.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
Default configuration file contains 1 entry.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
Failsafe booting engaged.
Default configuration file contains 1 entry.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
CISCO SYSTEMS
Embedded BIOS Version 1.0(12)11 04/30/08 15:45:41.19
Low Memory: 632 KB
High Memory: 507 MB
PCI Device Table.
Bus Dev Func VendID DevID Class Irq
00 01 00 1022 2080 Host Bridge
00 01 02 1022 2082 Chipset En/Decrypt 11
00 0C 00 1148 4320 Ethernet 11
00 0D 00 177D 0003 Network En/Decrypt 10
00 0F 00 1022 2090 ISA Bridge
00 0F 02 1022 2092 IDE Controller
00 0F 03 1022 2093 Audio 10
00 0F 04 1022 2094 Serial Bus 9
00 0F 05 1022 2095 Serial Bus 9
Evaluating BIOS Options ...
Launch BIOS Extension to setup ROMMON
Cisco Systems ROMMON Version (1.0(12)11) #4: Thu May 1 14:50:05 PDT 2008
Platform ASA5505
Use BREAK or ESC to interrupt boot.
Use SPACE to begin boot immediately.
Ethernet0/0
MAC Address: 0023.339e.2a91
Link is UP
Please set ADDRESS Variable.
Please set SERVER Variable.
Please set IMAGE Variable.
Launching BootLoader...
Default configuration file contains 1 entry.
Boot mode is 1. Default entry is 1.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
Default configuration file contains 1 entry.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
Failsafe booting engaged.
Default configuration file contains 1 entry.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
CISCO SYSTEMS
Embedded BIOS Version 1.0(12)11 04/30/08 15:45:41.19
Low Memory: 632 KB
High Memory: 507 MB
PCI Device Table.
Bus Dev Func VendID DevID Class Irq
00 01 00 1022 2080 Host Bridge
00 01 02 1022 2082 Chipset En/Decrypt 11
00 0C 00 1148 4320 Ethernet 11
00 0D 00 177D 0003 Network En/Decrypt 10
00 0F 00 1022 2090 ISA Bridge
00 0F 02 1022 2092 IDE Controller
00 0F 03 1022 2093 Audio 10
00 0F 04 1022 2094 Serial Bus 9
00 0F 05 1022 2095 Serial Bus 9
Evaluating BIOS Options ...
Launch BIOS Extension to setup ROMMON
Cisco Systems ROMMON Version (1.0(12)11) #4: Thu May 1 14:50:05 PDT 2008
Platform ASA5505
Use BREAK or ESC to interrupt boot.
Use SPACE to begin boot immediately.
Boot interrupted.
Ethernet0/0
MAC Address: 0023.339e.2a91
Link is UP
Use ? for help.
rommon #0> format disk0:
Invalid or incorrect command. Use 'help' for help.
rommon #0> ADDRESS=10.10.10.110
rommon #1> GATEWAY=10.10.10.1
rommon #2> SERVER=10.10.10.98
rommon #3> IMAGE=asa914-k8.bin
rommon #4> tftp
ROMMON Variable Settings:
ADDRESS=10.10.10.110
SERVER=10.10.10.98
GATEWAY=10.10.10.1
PORT=Ethernet0/0
VLAN=untagged
IMAGE=asa914-k8.bin
CONFIG=
LINKTIMEOUT=20
PKTTIMEOUT=4
RETRY=20
tftp [email protected] via 10.10.10.1
Received 27076608 bytes
Launching TFTP Image...
Cisco Security Appliance admin loader (3.0) #0: Thu Dec 5 19:38:43 PST 2013
Platform ASA5505
Loading...
IO memory blocks requested from bigphys 32bit: 9956
Àdosfsck 2.11, 12 Mar 2005, FAT32, LFN
Currently, only 1 or 2 FATs are supported, not 42.
dosfsck(/dev/hda1) returned 1
mount: mounting /dev/hda1 on /mnt/disk0 failed: Invalid argument
mount: mounting /dev/hda1 on /mnt/disk0 failed: Invalid argument
Processor memory 343932928, Reserved memory: 62914560
Total SSMs found: 0
Total NICs found: 10
88E6095 rev 2 Gigabit Ethernet @ index 09 MAC: 0000.0003.0002
88E6095 rev 2 Ethernet @ index 08 MAC: 0023.339e.2a90
88E6095 rev 2 Ethernet @ index 07 MAC: 0023.339e.2a8f
88E6095 rev 2 Ethernet @ index 06 MAC: 0023.339e.2a8e
88E6095 rev 2 Ethernet @ index 05 MAC: 0023.339e.2a8d
88E6095 rev 2 Ethernet @ index 04 MAC: 0023.339e.2a8c
88E6095 rev 2 Ethernet @ index 03 MAC: 0023.339e.2a8b
88E6095 rev 2 Ethernet @ index 02 MAC: 0023.339e.2a8a
88E6095 rev 2 Ethernet @ index 01 MAC: 0023.339e.2a89
y88acs06 rev16 Gigabit Ethernet @ index 00 MAC: 0023.339e.2a91
INFO: Unable to read firewall mode from flash
Writing default firewall mode (single) to flash
INFO: Unable to read cluster interface-mode from flash
Writing default mode "None" to flash
Verify the activation-key, it might take a while...
Failed to retrieve permanent activation key.
Running Permanent Activation Key: 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000
The Running Activation Key is not valid, using default settings:
Licensed features for this platform:
Maximum Physical Interfaces : 8 perpetual
VLANs : 3 DMZ Restricted
Dual ISPs : Disabled perpetual
VLAN Trunk Ports : 0 perpetual
Inside Hosts : 10 perpetual
Failover : Disabled perpetual
Encryption-DES : Enabled perpetual
Encryption-3DES-AES : Disabled perpetual
AnyConnect Premium Peers : 2 perpetual
AnyConnect Essentials : Disabled perpetual
Other VPN Peers : 10 perpetual
Total VPN Peers : 12 perpetual
Shared License : Disabled perpetual
AnyConnect for Mobile : Disabled perpetual
AnyConnect for Cisco VPN Phone : Disabled perpetual
Advanced Endpoint Assessment : Disabled perpetual
UC Phone Proxy Sessions : 2 perpetual
Total UC Proxy Sessions : 2 perpetual
Botnet Traffic Filter : Disabled perpetual
Intercompany Media Engine : Disabled perpetual
Cluster : Disabled perpetual
This platform has a Base license.
Encryption hardware device : Cisco ASA-5505 on-board accelerator (revision 0x0)
Boot microcode : CN1000-MC-BOOT-2.00
SSL/IKE microcode : CNLite-MC-SSLm-PLUS-2_05
IPSec microcode : CNlite-MC-IPSECm-MAIN-2.09
Cisco Adaptive Security Appliance Software Version 9.1(4)
****************************** Warning *******************************
This product contains cryptographic features and is
subject to United States and local country laws
governing, import, export, transfer, and use.
Delivery of Cisco cryptographic products does not
imply third-party authority to import, export,
distribute, or use encryption. Importers, exporters,
distributors and users are responsible for compliance
with U.S. and local country laws. By using this
product you agree to comply with applicable laws and
regulations. If you are unable to comply with U.S.
and local laws, return the enclosed items immediately.
A summary of U.S. laws governing Cisco cryptographic
products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by
sending email to [email protected].
******************************* Warning *******************************
This product includes software developed by the OpenSSL Project
for use in the OpenSSL Toolkit (http://www.openssl.org/)
Copyright (C) 1995-1998 Eric Young ([email protected])
All rights reserved.
Copyright (c) 1998-2011 The OpenSSL Project.
All rights reserved.
This product includes software developed at the University of
California, Irvine for use in the DAV Explorer project
(http://www.ics.uci.edu/~webdav/)
Copyright (c) 1999-2005 Regents of the University of California.
All rights reserved.
Busybox, version 1.16.1, Copyright (C) 1989, 1991 Free Software Foundation, Inc.
51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
Busybox comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it under the General
Public License v.2 (http://www.gnu.org/licenses/gpl-2.0.html)
See User Manual (''Licensing'') for details.
DOSFSTOOLS, version 2.11, Copyright (C) 1989, 1991 Free Software Foundation, Inc.
59 Temple Place, Suite 330, Boston, MA 02111-1307
675 Mass Ave, Cambridge, MA 02139
DOSFSTOOLS comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it under the General
Public License v.2 (http://www.gnu.org/licenses/gpl-2.0.html)
See User Manual (''Licensing'') for details.
grub, version 0.94, Copyright (C) 1989, 1991 Free Software Foundation, Inc.
59 Temple Place, Suite 330, Boston, MA 02111-1307
grub comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it under the General
Public License v.2 (http://www.gnu.org/licenses/gpl-2.0.html)
See User Manual (''Licensing'') for details.
libgcc, version 4.3, Copyright (C) 2007 Free Software Foundation, Inc.
libgcc comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it under the General
Public License v.2 (http://www.gnu.org/licenseSee User Manual (''Licensing'') for details.
libstdc++, version 4.3, Copyright (C) 2007 Free Software Foundation, Inc.
libstdc++ comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it under the General
Public License v.2 (http://www.gnu.org/licenses/gpl-2.0.html)
See User Manual (''Licensing'') for details.
Linux kernel, version 2.6.29.6, Copyright (C) 1989, 1991 Free Software
Foundation, Inc.
51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
Linux kernel comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it under the General
Public License v.2 (http://www.gnu.org/licenses/gpl-2.0.html)
See User Manual (''Licensing'') for details.
module-init-tools, version 3.10, Copyright (C) 1989, 1991 Free Software
Foundation, Inc.
59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
module-init-tools comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it under the General
Public License v.2 (http://www.gnu.org/licenses/gpl-2.0.html)
See User Manual (''Licensing'') for details.
numactl, version 2.0.3, Copyright (C) 2008 SGI.
Author: Andi Kleen, SUSE Labs
Version 2.0.0 by Cliff Wickman, Chritopher Lameter and Lee Schermerhorn
numactl comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it under the General
Public License v.2 (http://www.gnu.org/licenses/gpl-2.0.html)
See User Manual (''Licensing'') for details.
pciutils, version 3.1.4, Copyright (C) 1989, 1991 Free Software Foundation, Inc.
51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
pciutils comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it under the General
Public License v.2 (http://www.gnu.org/licenses/gpl-2.0.html)
See User Manual (''Licensing'') for details.
readline, version 5.2, Copyright (C) 1989, 1991 Free Software Foundation, Inc.
59 Temple Place, Suite 330, Boston, MA 02111 USA
readline comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it under the General
Public License v.2 (http://www.gnu.org/licenses/gpl-2.0.html)
See User Manual (''Licensing'') for details.
udev, version 146, Copyright (C) 1989, 1991 Free Software Foundation, Inc.
51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
udev comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it under the General
Public License v.2 (http://www.gnu.org/licenses/gpl-2.0.html)
See User Manual (''Licensing'') for details.
Cisco Adapative Security Appliance Software, version 9.1,
Copyright (c) 1996-2013 by Cisco Systems, Inc.
Certain components of Cisco ASA Software, Version 9.1 are licensed under the GNU
Lesser Public License (LGPL) Version 2.1. The software code licensed under LGPL
Version 2.1 is free software that comes with ABSOLUTELY NO WARRANTY. You can
redistribute and/or modify such LGPL code under the terms of LGPL Version 2.1
(http://www.gnu.org/licenses/lgpl-2.1.html). See User Manual for licensing
details.
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Insufficient flash space available for this request:
Size info: request:32 free:0 delta:32
Could not initialize system files in flash.
config_fetcher: channel open failed
ERROR: MIGRATION - Could not get the startup configuration.
INFO: Power-On Self-Test in process.
INFO: Power-On Self-Test complete.
INFO: MIGRATION - Saving the startup errors to file 'flash:upgrade_startup_errors_200804300128.log'
Pre-configure Firewall now through interactive prompts [yes]? n
Type help or '?' for a list of available commands.
ciscoasa> en
Password:
ciscoasa# format disk0:
Format operation may take a while. Continue? [confirm]
Format operation will destroy all data in "disk0:". Continue? [confirm]
Initializing partition - done!
Creating FAT16 filesystem
mkdosfs 2.11 (12 Mar 2005)
System tables written to disk
Format of disk0 complete
ciscoasa# format disk:
^
ERROR: % Invalid input detected at '^' marker.
ciscoasa# format flash:
Format operation may take a while. Continue? [confirm]
Format operation will destroy all data in "flash:". Continue? [confirm]
Initializing partition - done!Yeah...I think I found that one out the hard way already. I'll cross that bridge when I get to it. I want to get this issue fixed before I start thinking about the license issue.
ciscoasa#
ciscoasa#
ciscoasa#
ciscoasa# sh flash
--#-- --length-- -----date/time------ path
2403 0 Apr 30 2008 02:00:56 test
2285 196 Apr 30 2008 01:28:20 upgrade_startup_errors_200804300128.log
2283 0 Apr 30 2008 01:28:20 coredumpinfo
2284 59 Apr 30 2008 01:28:20 coredumpinfo/coredump.cfg
2280 0 Apr 30 2008 01:27:56 crypto_archive
2267 0 Apr 30 2008 01:27:38 log
0 bytes total (0 bytes free)
ciscoasa#
ciscoasa#
ciscoasa#
ciscoasa# sh disk0
--#-- --length-- -----date/time------ path
2403 0 Apr 30 2008 02:00:56 test
2285 196 Apr 30 2008 01:28:20 upgrade_startup_errors_200804300128.log
2283 0 Apr 30 2008 01:28:20 coredumpinfo
2284 59 Apr 30 2008 01:28:20 coredumpinfo/coredump.cfg
2280 0 Apr 30 2008 01:27:56 crypto_archive
2267 0 Apr 30 2008 01:27:38 log
0 bytes total (0 bytes free)
ciscoasa# -
Dynamic Routing Protocol Support in Cisco ASA Multiple Context Mode
Dear Experts,
Wold like to know whether dynamic Routing Protocol Support in Cisco ASA Firewall Multiple Context Mode. If yes then please provide OS version and Hardware Model of Cisco ASA Firewall. Appreciate the quick response. Thanks.Hi,
Check out this document for the information
http://www.cisco.com/en/US/docs/security/asa/roadmap/asa_new_features.html#wp93116
Its lists the following for software level 9.0(1)
Multiple Context Mode Features
Dynamic routing in Security Contexts
EIGRP and OSPFv2 dynamic routing protocols are now supported in multiple context mode. OSPFv3, RIP, and multicast routing are not supported.
Seems to me you would need some 9.x version to support the above mentioned Dynamic Routing Protocols.
I don't think its related to the hardware model of the ASA other than that it requires a model that supports Multiple Context Mode. To my understanding the only model that doesnt support that is ASA5505 of the whole ASA5500 and ASA5500-X series.
Hope this helps
- Jouni -
Cisco ASA 5505 site to site Multiple subnet.
Hi. I need some help configuring my cisco asa 5505.
I've set up a VPN tunnel between two ASA 5505
Site 1:
Subnet 192.168.77.0
Site 2:
Have multiple vlans and now the tunnel goes to vlan400 - 192.168.1.0
What I need help with:
From site 1 i need to be able to reach another vlan on site 2. vlan480 - 192.168.20.0
And from site 1 I need to reach 192.168.77.0 subnet from vlan480 - 192.168.20.0
Vlan480 is used for phones. In vlan480 we have a PABX central.
Is this possible to do?
Any help would be greatfully appreciated!
Config site 2:
: Saved
ASA Version 7.2(2)
hostname ciscoasa
domain-name default.domain.invalid
enable password x encrypted
names
name 192.168.1.250 DomeneServer
name 192.168.1.10 NotesServer
name 192.168.1.90 OvServer
name 192.168.1.97 TerminalServer
name 192.168.1.98 w8-eyeshare
name 192.168.50.10 w8-print
name 192.168.1.94 w8-app
name 192.168.1.89 FonnaFlyMedia
interface Vlan1
nameif Vlan1
security-level 100
ip address 192.168.200.100 255.255.255.0
ospf cost 10
interface Vlan2
nameif outside
security-level 0
ip address 79.x.x.226 255.255.255.224
ospf cost 10
interface Vlan400
nameif vlan400
security-level 100
ip address 192.168.1.1 255.255.255.0
ospf cost 10
interface Vlan450
nameif Vlan450
security-level 100
ip address 192.168.210.1 255.255.255.0
ospf cost 10
interface Vlan460
nameif Vlan460-SuldalHotell
security-level 100
ip address 192.168.2.1 255.255.255.0
ospf cost 10
interface Vlan461
nameif Vlan461-SuldalHotellGjest
security-level 100
ip address 192.168.3.1 255.255.255.0
ospf cost 10
interface Vlan462
nameif Vlan462-Suldalsposten
security-level 100
ip address 192.168.4.1 255.255.255.0
ospf cost 10
interface Vlan470
nameif vlan470-Kyrkjekontoret
security-level 100
ip address 192.168.202.1 255.255.255.0
ospf cost 10
interface Vlan480
nameif vlan480-Telefoni
security-level 100
ip address 192.168.20.1 255.255.255.0
ospf cost 10
interface Vlan490
nameif Vlan490-QNapBackup
security-level 100
ip address 192.168.10.1 255.255.255.0
ospf cost 10
interface Vlan500
nameif Vlan500-HellandBadlands
security-level 100
ip address 192.168.30.1 255.255.255.0
ospf cost 10
interface Vlan510
nameif Vlan510-IsTak
security-level 100
ip address 192.168.40.1 255.255.255.0
ospf cost 10
interface Vlan600
nameif Vlan600-SafeQ
security-level 100
ip address 192.168.50.1 255.255.255.0
ospf cost 10
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
switchport access vlan 500
switchport trunk allowed vlan 400,450,460-462,470,480,500,510,600,610
switchport mode trunk
interface Ethernet0/3
switchport access vlan 490
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
passwd x encrypted
ftp mode passive
clock timezone WAT 1
dns server-group DefaultDNS
domain-name default.domain.invalid
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object-group service Lotus_Notes_Utgaaande tcp
description Frim Notes og ut til alle
port-object eq domain
port-object eq ftp
port-object eq www
port-object eq https
port-object eq lotusnotes
port-object eq pop3
port-object eq pptp
port-object eq smtp
object-group service Lotus_Notes_inn tcp
description From alle og inn til Notes
port-object eq www
port-object eq lotusnotes
port-object eq pop3
port-object eq smtp
object-group service Reisebyraa tcp-udp
port-object range 3702 3702
port-object range 5500 5500
port-object range 9876 9876
object-group service Remote_Desktop tcp-udp
description Tilgang til Remote Desktop
port-object range 3389 3389
object-group service Sand_Servicenter_50000 tcp-udp
description Program tilgang til Sand Servicenter AS
port-object range 50000 50000
object-group service VNC_Remote_Admin tcp
description Frå oss til alle
port-object range 5900 5900
object-group service Printer_Accept tcp-udp
port-object range 9100 9100
port-object eq echo
object-group icmp-type Echo_Ping
icmp-object echo
icmp-object echo-reply
object-group service Print tcp
port-object range 9100 9100
object-group service FTP_NADA tcp
description Suldalsposten NADA tilgang
port-object eq ftp
port-object eq ftp-data
object-group service Telefonsentral tcp
description Hoftun
port-object eq ftp
port-object eq ftp-data
port-object eq www
port-object eq https
port-object eq telnet
object-group service Printer_inn_800 tcp
description Fra 800 nettet og inn til 400 port 7777
port-object range 7777 7777
object-group service Suldalsposten tcp
description Sending av mail vha Mac Mail programmet - åpner smtp
port-object eq pop3
port-object eq smtp
object-group service http2 tcp
port-object range 81 81
object-group service DMZ_FTP_PASSIVE tcp-udp
port-object range 55536 56559
object-group service DMZ_FTP tcp-udp
port-object range 20 21
object-group service DMZ_HTTPS tcp-udp
port-object range 443 443
object-group service DMZ_HTTP tcp-udp
port-object range 8080 8080
object-group service DNS_Query tcp
port-object range domain domain
object-group service DUETT_SQL_PORT tcp-udp
description For kobling mellom andre nett og duett server
port-object range 54659 54659
access-list outside_access_in extended permit ip any any
access-list outside_access_out extended permit ip any any
access-list vlan400_access_in extended deny ip any host 149.20.56.34
access-list vlan400_access_in extended deny ip any host 149.20.56.32
access-list vlan400_access_in extended permit ip any any
access-list Vlan450_access_in extended deny ip any host 149.20.56.34
access-list Vlan450_access_in extended deny ip any host 149.20.56.32
access-list Vlan450_access_in extended permit ip any any
access-list Vlan460_access_in extended deny ip any host 149.20.56.34
access-list Vlan460_access_in extended deny ip any host 149.20.56.32
access-list Vlan460_access_in extended permit ip any any
access-list vlan400_access_out extended permit icmp any any object-group Echo_Ping
access-list vlan400_access_out extended permit tcp any host NotesServer object-group Lotus_Notes_Utgaaande
access-list vlan400_access_out extended permit tcp any host DomeneServer object-group Remote_Desktop
access-list vlan400_access_out extended permit tcp any host TerminalServer object-group Remote_Desktop
access-list vlan400_access_out extended permit tcp any host OvServer object-group http2
access-list vlan400_access_out extended permit tcp any host NotesServer object-group Lotus_Notes_inn
access-list vlan400_access_out extended permit tcp any host NotesServer object-group Remote_Desktop
access-list vlan400_access_out extended permit tcp any host w8-eyeshare object-group Remote_Desktop
access-list vlan400_access_out extended permit tcp any host w8-app object-group Remote_Desktop
access-list vlan400_access_out extended permit tcp any host FonnaFlyMedia range 8400 8600
access-list vlan400_access_out extended permit udp any host FonnaFlyMedia range 9000 9001
access-list vlan400_access_out extended permit tcp 192.168.4.0 255.255.255.0 host DomeneServer
access-list vlan400_access_out extended permit tcp 192.168.4.0 255.255.255.0 host w8-app object-group DUETT_SQL_PORT
access-list Vlan500_access_in extended deny ip any host 149.20.56.34
access-list Vlan500_access_in extended deny ip any host 149.20.56.32
access-list Vlan500_access_in extended permit ip any any
access-list vlan470_access_in extended deny ip any host 149.20.56.34
access-list vlan470_access_in extended deny ip any host 149.20.56.32
access-list vlan470_access_in extended permit ip any any
access-list Vlan490_access_in extended deny ip any host 149.20.56.34
access-list Vlan490_access_in extended deny ip any host 149.20.56.32
access-list Vlan490_access_in extended permit ip any any
access-list Vlan450_access_out extended permit icmp any any object-group Echo_Ping
access-list Vlan1_access_out extended permit ip any any
access-list Vlan1_access_out extended permit tcp any host w8-print object-group Remote_Desktop
access-list Vlan1_access_out extended deny ip any any
access-list Vlan1_access_out extended permit icmp any any echo-reply
access-list Vlan460_access_out extended permit icmp any any object-group Echo_Ping
access-list Vlan490_access_out extended permit icmp any any object-group Echo_Ping
access-list Vlan490_access_out extended permit tcp any host 192.168.10.10 object-group DMZ_FTP
access-list Vlan490_access_out extended permit tcp any host 192.168.10.10 object-group DMZ_FTP_PASSIVE
access-list Vlan490_access_out extended permit tcp any host 192.168.10.10 object-group DMZ_HTTPS
access-list Vlan490_access_out extended permit tcp any host 192.168.10.10 object-group DMZ_HTTP
access-list Vlan500_access_out extended permit icmp any any object-group Echo_Ping
access-list vlan470_access_out extended permit icmp any any object-group Echo_Ping
access-list vlan470_access_out extended permit tcp any host 192.168.202.10 object-group Remote_Desktop
access-list Vlan510_access_out extended permit icmp any any object-group Echo_Ping
access-list vlan480_access_out extended permit ip any any
access-list Vlan510_access_in extended permit ip any any
access-list Vlan600_access_in extended permit ip any any
access-list Vlan600_access_out extended permit icmp any any
access-list Vlan600_access_out extended permit tcp any host w8-print object-group Remote_Desktop
access-list Vlan600_access_out extended permit tcp 192.168.1.0 255.255.255.0 host w8-print eq www
access-list Vlan600_access_out extended permit tcp 192.168.202.0 255.255.255.0 host w8-print eq www
access-list Vlan600_access_out extended permit tcp 192.168.210.0 255.255.255.0 host w8-print eq www
access-list Vlan600_access_in_1 extended permit ip any any
access-list Vlan461_access_in extended permit ip any any
access-list Vlan461_access_out extended permit icmp any any object-group Echo_Ping
access-list vlan400_nat0_outbound extended permit ip 192.168.1.0 255.255.255.0 192.168.77.0 255.255.255.0
access-list outside_20_cryptomap_1 extended permit ip 192.168.1.0 255.255.255.0 192.168.77.0 255.255.255.0
access-list outside_20_cryptomap extended permit ip 192.168.1.0 255.255.255.0 192.168.77.0 255.255.255.0
access-list Vlan462-Suldalsposten_access_in extended permit ip any any
access-list Vlan462-Suldalsposten_access_out extended permit icmp any any echo-reply
access-list Vlan462-Suldalsposten_access_out_1 extended permit icmp any any echo-reply
access-list Vlan462-Suldalsposten_access_in_1 extended permit ip any any
pager lines 24
logging enable
logging asdm informational
mtu Vlan1 1500
mtu outside 1500
mtu vlan400 1500
mtu Vlan450 1500
mtu Vlan460-SuldalHotell 1500
mtu Vlan461-SuldalHotellGjest 1500
mtu vlan470-Kyrkjekontoret 1500
mtu vlan480-Telefoni 1500
mtu Vlan490-QNapBackup 1500
mtu Vlan500-HellandBadlands 1500
mtu Vlan510-IsTak 1500
mtu Vlan600-SafeQ 1500
mtu Vlan462-Suldalsposten 1500
no failover
monitor-interface Vlan1
monitor-interface outside
monitor-interface vlan400
monitor-interface Vlan450
monitor-interface Vlan460-SuldalHotell
monitor-interface Vlan461-SuldalHotellGjest
monitor-interface vlan470-Kyrkjekontoret
monitor-interface vlan480-Telefoni
monitor-interface Vlan490-QNapBackup
monitor-interface Vlan500-HellandBadlands
monitor-interface Vlan510-IsTak
monitor-interface Vlan600-SafeQ
monitor-interface Vlan462-Suldalsposten
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-522.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (vlan400) 0 access-list vlan400_nat0_outbound
nat (vlan400) 1 0.0.0.0 0.0.0.0 dns
nat (Vlan450) 1 0.0.0.0 0.0.0.0 dns
nat (Vlan460-SuldalHotell) 1 0.0.0.0 0.0.0.0
nat (Vlan461-SuldalHotellGjest) 1 0.0.0.0 0.0.0.0
nat (vlan470-Kyrkjekontoret) 1 0.0.0.0 0.0.0.0
nat (Vlan490-QNapBackup) 1 0.0.0.0 0.0.0.0 dns
nat (Vlan500-HellandBadlands) 1 0.0.0.0 0.0.0.0
nat (Vlan510-IsTak) 1 0.0.0.0 0.0.0.0
nat (Vlan600-SafeQ) 1 0.0.0.0 0.0.0.0
nat (Vlan462-Suldalsposten) 1 0.0.0.0 0.0.0.0
static (vlan400,outside) 79.x.x.x DomeneServer netmask 255.255.255.255
static (vlan470-Kyrkjekontoret,outside) 79.x.x.x 192.168.202.10 netmask 255.255.255.255
static (vlan400,outside) 79.x.x.x NotesServer netmask 255.255.255.255 dns
static (vlan400,outside) 79.x.x.231 TerminalServer netmask 255.255.255.255
static (vlan400,outside) 79.x.x.234 OvServer netmask 255.255.255.255
static (vlan400,outside) 79.x.x.232 w8-eyeshare netmask 255.255.255.255
static (Vlan490-QNapBackup,outside) 79.x.x.233 192.168.10.10 netmask 255.255.255.255 dns
static (Vlan600-SafeQ,outside) 79.x.x.235 w8-print netmask 255.255.255.255
static (vlan400,outside) 79.x.x.236 w8-app netmask 255.255.255.255
static (Vlan450,vlan400) 192.168.210.0 192.168.210.0 netmask 255.255.255.0
static (Vlan500-HellandBadlands,vlan400) 192.168.30.0 192.168.30.0 netmask 255.255.255.0
static (vlan400,Vlan500-HellandBadlands) 192.168.1.0 192.168.1.0 netmask 255.255.255.0
static (vlan400,Vlan450) 192.168.1.0 192.168.1.0 netmask 255.255.255.0
static (vlan400,outside) 79.x.x.252 FonnaFlyMedia netmask 255.255.255.255
static (Vlan462-Suldalsposten,vlan400) 192.168.4.0 192.168.4.0 netmask 255.255.255.0
static (vlan400,Vlan462-Suldalsposten) 192.168.1.0 192.168.1.0 netmask 255.255.255.0
static (vlan400,Vlan600-SafeQ) 192.168.1.0 192.168.1.0 netmask 255.255.255.0
static (Vlan600-SafeQ,vlan400) 192.168.50.0 192.168.50.0 netmask 255.255.255.0
static (Vlan600-SafeQ,Vlan450) 192.168.50.0 192.168.50.0 netmask 255.255.255.0
static (Vlan600-SafeQ,vlan470-Kyrkjekontoret) 192.168.50.0 192.168.50.0 netmask 255.255.255.0
static (Vlan450,Vlan600-SafeQ) 192.168.210.0 192.168.210.0 netmask 255.255.255.0
static (vlan470-Kyrkjekontoret,Vlan600-SafeQ) 192.168.202.0 192.168.202.0 netmask 255.255.255.0
access-group Vlan1_access_out out interface Vlan1
access-group outside_access_in in interface outside
access-group outside_access_out out interface outside
access-group vlan400_access_in in interface vlan400
access-group vlan400_access_out out interface vlan400
access-group Vlan450_access_in in interface Vlan450
access-group Vlan450_access_out out interface Vlan450
access-group Vlan460_access_in in interface Vlan460-SuldalHotell
access-group Vlan460_access_out out interface Vlan460-SuldalHotell
access-group Vlan461_access_in in interface Vlan461-SuldalHotellGjest
access-group Vlan461_access_out out interface Vlan461-SuldalHotellGjest
access-group vlan470_access_in in interface vlan470-Kyrkjekontoret
access-group vlan470_access_out out interface vlan470-Kyrkjekontoret
access-group vlan480_access_out out interface vlan480-Telefoni
access-group Vlan490_access_in in interface Vlan490-QNapBackup
access-group Vlan490_access_out out interface Vlan490-QNapBackup
access-group Vlan500_access_in in interface Vlan500-HellandBadlands
access-group Vlan500_access_out out interface Vlan500-HellandBadlands
access-group Vlan510_access_in in interface Vlan510-IsTak
access-group Vlan510_access_out out interface Vlan510-IsTak
access-group Vlan600_access_in_1 in interface Vlan600-SafeQ
access-group Vlan600_access_out out interface Vlan600-SafeQ
access-group Vlan462-Suldalsposten_access_in_1 in interface Vlan462-Suldalsposten
access-group Vlan462-Suldalsposten_access_out_1 out interface Vlan462-Suldalsposten
route outside 0.0.0.0 0.0.0.0 79.x.x.225 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
username x password x encrypted privilege 15
aaa authentication ssh console LOCAL
http server enable
http 192.168.210.0 255.255.255.0 Vlan450
http 192.168.200.0 255.255.255.0 Vlan1
http 192.168.1.0 255.255.255.0 vlan400
no snmp-server location
no snmp-server contact
snmp-server community public
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto map outside_map 20 match address outside_20_cryptomap_1
crypto map outside_map 20 set pfs
crypto map outside_map 20 set peer 62.92.159.137
crypto map outside_map 20 set transform-set ESP-3DES-SHA
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp enable vlan400
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
tunnel-group 62.92.159.137 type ipsec-l2l
tunnel-group 62.92.159.137 ipsec-attributes
pre-shared-key *
telnet 192.168.200.0 255.255.255.0 Vlan1
telnet 192.168.1.0 255.255.255.0 vlan400
telnet timeout 5
ssh 171.68.225.216 255.255.255.255 outside
ssh timeout 5
console timeout 0
dhcpd update dns both
dhcpd option 6 ip 81.167.36.3 81.167.36.11 interface Vlan1
dhcpd option 6 ip 81.167.36.3 81.167.36.11 interface outside
dhcpd address 192.168.1.100-192.168.1.225 vlan400
dhcpd option 6 ip DomeneServer 81.167.36.11 interface vlan400
dhcpd option 3 ip 192.168.1.1 interface vlan400
dhcpd enable vlan400
dhcpd address 192.168.210.100-192.168.210.200 Vlan450
dhcpd option 6 ip 81.167.36.3 81.167.36.11 interface Vlan450
dhcpd option 3 ip 192.168.210.1 interface Vlan450
dhcpd enable Vlan450
dhcpd address 192.168.2.100-192.168.2.150 Vlan460-SuldalHotell
dhcpd option 6 ip 81.167.36.3 81.167.36.11 interface Vlan460-SuldalHotell
dhcpd option 3 ip 192.168.2.1 interface Vlan460-SuldalHotell
dhcpd enable Vlan460-SuldalHotell
dhcpd address 192.168.3.100-192.168.3.200 Vlan461-SuldalHotellGjest
dhcpd option 6 ip 81.167.36.3 81.167.36.11 interface Vlan461-SuldalHotellGjest
dhcpd option 3 ip 192.168.3.1 interface Vlan461-SuldalHotellGjest
dhcpd enable Vlan461-SuldalHotellGjest
dhcpd address 192.168.202.100-192.168.202.199 vlan470-Kyrkjekontoret
dhcpd option 3 ip 192.168.202.1 interface vlan470-Kyrkjekontoret
dhcpd option 6 ip 81.167.36.3 81.167.36.11 interface vlan470-Kyrkjekontoret
dhcpd enable vlan470-Kyrkjekontoret
dhcpd option 3 ip 192.168.20.1 interface vlan480-Telefoni
dhcpd option 6 ip 81.167.36.3 81.167.36.11 interface vlan480-Telefoni
dhcpd address 192.168.10.80-192.168.10.90 Vlan490-QNapBackup
dhcpd option 6 ip 81.167.36.3 81.167.36.11 interface Vlan490-QNapBackup
dhcpd option 3 ip 192.168.10.1 interface Vlan490-QNapBackup
dhcpd address 192.168.30.100-192.168.30.199 Vlan500-HellandBadlands
dhcpd option 6 ip 81.167.36.3 81.167.36.11 interface Vlan500-HellandBadlands
dhcpd option 3 ip 192.168.30.1 interface Vlan500-HellandBadlands
dhcpd enable Vlan500-HellandBadlands
dhcpd address 192.168.40.100-192.168.40.150 Vlan510-IsTak
dhcpd option 6 ip 81.167.36.3 81.167.36.11 interface Vlan510-IsTak
dhcpd option 3 ip 192.168.40.1 interface Vlan510-IsTak
dhcpd enable Vlan510-IsTak
dhcpd address 192.168.50.150-192.168.50.199 Vlan600-SafeQ
dhcpd option 6 ip 81.167.36.3 81.167.36.11 interface Vlan600-SafeQ
dhcpd enable Vlan600-SafeQ
dhcpd address 192.168.4.100-192.168.4.150 Vlan462-Suldalsposten
dhcpd option 6 ip DomeneServer 81.167.36.11 interface Vlan462-Suldalsposten
dhcpd option 3 ip 192.168.4.1 interface Vlan462-Suldalsposten
dhcpd enable Vlan462-Suldalsposten
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
prompt hostname context
Cryptochecksum:x
: end
Config site 1:
: Saved
ASA Version 7.2(4)
hostname ciscoasa
domain-name default.domain.invalid
enable password x encrypted
passwd x encrypted
names
interface Vlan1
nameif inside
security-level 100
ip address 192.168.77.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
pppoe client vpdn group Telenor
ip address pppoe setroute
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
switchport access vlan 15
interface Ethernet0/6
interface Ethernet0/7
ftp mode passive
dns server-group DefaultDNS
domain-name default.domain.invalid
access-list outside_access_in extended permit icmp any any echo-reply log disable
access-list outside_1_cryptomap extended permit ip 192.168.77.0 255.255.255.0 192.168.1.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.77.0 255.255.255.0 192.168.1.0 255.255.255.0
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-524.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
access-group outside_access_in in interface outside
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
http server enable
http 192.168.77.0 255.255.255.0 inside
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto map outside_map 1 match address outside_1_cryptomap
crypto map outside_map 1 set pfs
crypto map outside_map 1 set peer 79.160.252.226
crypto map outside_map 1 set transform-set ESP-3DES-SHA
crypto map outside_map interface outside
crypto isakmp enable inside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet 192.168.77.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
vpdn group Telenor request dialout pppoe
vpdn group Telenor localname x
vpdn group Telenor ppp authentication chap
vpdn username x password x store-local
dhcpd auto_config outside
dhcpd address 192.168.77.100-192.168.77.130 inside
dhcpd dns 192.168.77.1 interface inside
dhcpd option 6 ip 130.67.15.198 193.213.112.4 interface inside
dhcpd enable inside
dhcpd option 6 ip 130.67.15.198 193.213.112.4 interface outside
tunnel-group 79.160.252.226 type ipsec-l2l
tunnel-group 79.160.252.226 ipsec-attributes
pre-shared-key *
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
service-policy global_policy global
prompt hostname context
Cryptochecksum:x
: endHi,
The addition of a new network to the existing L2L VPN should be a pretty simple process.
Essentially you will have to add the network to the Crypto ACL present in the "crypto map" configurations. You will also have to configure the NAT0 configuration for it in the proper interfaces of the ASA. These configurations are all done on both ends of the L2L VPN connection.
Looking at your above configurations it would seem that you will need the following configurations
SITE 1
We add the new network to both the crypto ACL and the NAT0 ACL
access-list outside_1_cryptomap extended permit ip 192.168.77.0 255.255.255.0 192.168.20.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.77.0 255.255.255.0 192.168.20.0 255.255.255.0
SITE 2
We add the new network to the crypto ACL
We create a new NAT0 configuration for the Vlan480 interface as it has no previous NAT0 configuration
access-list outside_20_cryptomap_1 extended permit ip 192.168.20.0 255.255.255.0 192.168.77.0 255.255.255.0
access-list VLAN480-NAT0 remark NAT0 for VPN
access-list VLAN480-NAT0 permit ip 192.168.20.0 255.255.255.0 192.168.77.0 255.255.255.0
nat (vlan480-Telefoni) 0 access-list VLAN480-NAT0
These configurations should pretty much do the trick.
Let me know if it worked
- Jouni -
Azure multiple site-to-site VPNs (dynamic gateway) with Cisco ASA devices
Hello
I've been experimenting with moving certain on-premise servers to Azure however they would need a site-to-site VPN link to our many branch sites e.g. monitoring of nodes.
The documentation says I need to configure a dynamic gateway to have multiple site-to-site VPNs. This is not a problem for our typical Cisco ISR's. However three of our key sites use Cisco ASA devices which are listed as 'Not Compatible' with dynamic routing.
So I am stuck...
What options are available to me? Is there any sort of tweak-configuration to make a Cisco ASA work with Azure and dynamic routing?
I was hoping Azure's VPN solution would be very flexible.
ThanksHello RTF_Admin,
1. Which is the Series of CISCO ASA device you are using?
Thank you for your interest in Windows Azure. The Dynamic routing is not supported for the Cisco ASA family of devices.
Unfortunately, a dynamic routing VPN gateway is required for Multi-Site VPN, VNet to VNet, and Point-to-Site.
However, you should be able to setup a site-to-site VPN with Cisco ASA 5505 series security appliance as demonstrated in this blog:
Step-By-Step: Create a Site-to-Site VPN between your network and Azure
http://blogs.technet.com/b/canitpro/archive/2013/10/09/step-by-step-create-a-site-to-site-vpn-between-your-network-and-azure.aspx
You can refer to this article for Cisco ASA templates for Static routing:
http://msdn.microsoft.com/en-us/library/azure/dn133793.aspx
If your requirement is only for Multi-Site VPN then there is no option but to upgrade the device as Multisite VPN requires dyanmic routing and unfortunately there is no tweak or workaround due to hardware compatibility issue.
I hope that this information is helpful
Thanks,
Syed Irfan Hussain -
Cisco ASA using Multiple DNS Names
Hi,
I am trying to setup a Cisco ASA for SSL vpn; however due to load balancing/traffic redirection performed by a different device; I was wondering if it may be possible perform a certificaate signing request/certificate required for it to have multiple address? An example would be:
IP: 1.1.1.1, fqdn: vpn1.asa.com
IP: 1.1.1.2, fqdn: vpn2.asa.com
IP: 1.1.1.3 fqdn: vpn3.asa.com
Not too sure on how to perform the CSR for it on the ASA? Do I create the csr cert with a single cn=vpn1.asa.com and ask the CA vendor to sign it off with SANsof vpn2.asa.com and vpn3.asa.com?
Client performing ssl vpn on vpn1.asa.com or vpn2.asa.com or vpn3.asa.com should not be prompted certificate warning.
Thanks.Hi,
Appreciate the input. For the setup; the different fqdn is used due to different authentications/locations/etc... used. I have further illustrate the setup using the same interface for vpn access:
vpn3.asa.com (Extranet Vendor Access)--------------------------------|
|
|
|
vpn1.asa.com (External branch offices)-------------------------------ASA -------------Internal authentication servers
|
|
vpn2.asa.com(HQ/Corporate Users)-----------------------------------------
Not too sure for the creation of the CSR with a single cn=vpn1.asa.com and ask the CA vendor to sign it off with SANs of vpn2.asa.com and vpn3.asa.com as well as vpn1.asa.com?
Thanks. -
Include multiple sub-interfaces in Cisco ASA for VPN tunnel
I am trying to create a VPN tunnel between two Cisco ASAs where one ASA has multiple sub-interfaces.
Say, In Cisco ASA 5550(in datacentre), I created multiple subinterfaces with VLAN ID as below:
Inside, int0/1 : 10.1.1.0/24
DMZ, int0/1.100: 10.1.100.0/24 (VLAN 100)
Production, int 0/1.101 : 10.1.101.0/24 (VLAN 101)
Management, int 0/1.102: 10.1.102.0/24 (VLAN 102)
And another Cisco ASA 5505 is only configured with 1 x inside interface Inside, int 0/1: 192.168.1.0/24
So far, I have only been able to provide outside access to one of the sub-interfaces as NAT rule on inside interface didn't work for VLANs. Hence had to issue Global NAT rule to be applied on Production subinterface so that production VLAN can have outside access. I have managed to establish VPN tunnel between two ASAs on Production sub-interface only, Source interface = Production subinterface
Additional settings:
Have ACL to allow all sub interfaces to access outsite ( lower security level)
NAT rules is configured on Production subinterface with Source NAT Type as Dynamic PAT; when this was configured with source interface as inside, PCs behind various VLAN coun't access internet.
I want to establish a site-to-site VPN tunnel with multiple sub-interfaces of Cisco ASA 5550 to Cisco ASA 5505. Would you please suggest what I am missing in my configuration? I need to be able to access multiple VLANs of datacentre from remote site.I am trying to create a VPN tunnel between two Cisco ASAs where one ASA has multiple sub-interfaces.
Say, In Cisco ASA 5550(in datacentre), I created multiple subinterfaces with VLAN ID as below:
Inside, int0/1 : 10.1.1.0/24
DMZ, int0/1.100: 10.1.100.0/24 (VLAN 100)
Production, int 0/1.101 : 10.1.101.0/24 (VLAN 101)
Management, int 0/1.102: 10.1.102.0/24 (VLAN 102)
And another Cisco ASA 5505 is only configured with 1 x inside interface Inside, int 0/1: 192.168.1.0/24
So far, I have only been able to provide outside access to one of the sub-interfaces as NAT rule on inside interface didn't work for VLANs. Hence had to issue Global NAT rule to be applied on Production subinterface so that production VLAN can have outside access. I have managed to establish VPN tunnel between two ASAs on Production sub-interface only, Source interface = Production subinterface
Additional settings:
Have ACL to allow all sub interfaces to access outsite ( lower security level)
NAT rules is configured on Production subinterface with Source NAT Type as Dynamic PAT; when this was configured with source interface as inside, PCs behind various VLAN coun't access internet.
I want to establish a site-to-site VPN tunnel with multiple sub-interfaces of Cisco ASA 5550 to Cisco ASA 5505. Would you please suggest what I am missing in my configuration? I need to be able to access multiple VLANs of datacentre from remote site. -
Cisco ASA 5505 - IPsec Tunnel issue
Issue with IPsec Child SA
Hi,
I have a site to site VPN tunnel setup with a Cisco ASA5505 and a Checkpoint Firewall. The version of software is 9.22. I am using IKEv2 for Phase 1 encryption. The following is my cisco asa configuration:
hostname GARPR-COM1-WF01
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
names
interface Ethernet0/0
description Failover Link
switchport access vlan 950
interface Ethernet0/1
description Outside FW Link
switchport access vlan 999
interface Ethernet0/2
description Inside FW Link
switchport access vlan 998
interface Ethernet0/3
description Management Link
switchport access vlan 6
interface Ethernet0/4
shutdown
interface Ethernet0/5
shutdown
interface Ethernet0/6
shutdown
interface Ethernet0/7
shutdown
interface Vlan1
no nameif
no security-level
no ip address
interface Vlan6
nameif management
security-level 100
ip address 10.65.1.20 255.255.255.240
interface Vlan950
description LAN Failover Interface
interface Vlan998
nameif inside
security-level 100
ip address 10.65.1.5 255.255.255.252
interface Vlan999
nameif outside
security-level 0
ip address ************* 255.255.255.248
boot system disk0:/asa922-4-k8.bin
ftp mode passive
dns server-group DefaultDNS
domain-name ***************
object network North_American_LAN
subnet 10.73.0.0 255.255.0.0
description North American LAN
object network Queretaro_LAN
subnet 10.74.0.0 255.255.0.0
description Queretaro_LAN
object network Tor_LAN
subnet 10.75.0.0 255.255.0.0
description Tor LAN
object network Mor_LAN
subnet 10.76.0.0 255.255.0.0
description Mor LAN
object network Tus_LAN
subnet 10.79.128.0 255.255.128.0
description North American LAN
object network Mtl_LAN
subnet 10.88.0.0 255.255.0.0
description Mtl LAN
object network Wic_LAN
subnet 10.90.0.0 255.254.0.0
description Wic LAN
object network Wic_LAN_172
subnet 172.18.0.0 255.255.0.0
description Wic Servers/Legacy Client LAN
object network Mtl_LAN_172
subnet 172.19.0.0 255.255.0.0
description Mtl Servers/Legacy Client LAN
object network Tor_LAN_172
subnet 172.20.0.0 255.255.0.0
description Tor Servers/Legacy Client LAN
object network Bridge_LAN_172
subnet 172.23.0.0 255.255.0.0
description Bridge Servers/Legacy Client LAN
object network Mtl_WLAN
subnet 10.114.0.0 255.255.0.0
description Mtl Wireless LAN
object network Bel_WLAN
subnet 10.115.0.0 255.255.0.0
description Bel Wireless LAN
object network Wic_WLAN
subnet 10.116.0.0 255.255.0.0
description Wic Wireless LAN
object network Mtl_Infrastructure_10
subnet 10.96.0.0 255.255.0.0
description Mtl Infrastructre LAN
object network BA_Small_Site_Blocks
subnet 10.68.0.0 255.255.0.0
description BA Small Sites Blocks
object network Bel_LAN
subnet 10.92.0.0 255.255.0.0
description Bel LAN 10 Network
object network LAN_172
subnet 172.25.0.0 255.255.0.0
description LAN 172 Network
object network Gar_LAN
subnet 10.65.1.0 255.255.255.0
description Gar LAN
object network garpr-com1-wf01.net.aero.bombardier.net
host **************
description Garching Firewall
object-group network BA_Sites
description Internal Networks
network-object object BA_Small_Site_Blocks
network-object object Bel_LAN
network-object object Bel_LAN_172
network-object object Bel_WLAN
network-object object Bridge_LAN_172
network-object object Mtl_Infrastructure_10
network-object object Mtl_LAN
network-object object Mtl_LAN_172
network-object object Mtl_WLAN
network-object object Mor_LAN
network-object object North_American_LAN
network-object object Queretaro_LAN
network-object object Tor_LAN
network-object object Tor_LAN_172
network-object object Tus_LAN
network-object object Wic_LAN
network-object object Wic_LAN_172
network-object object Wic_WLAN
access-list 101 extended permit ip object garpr-com1-wf01.net.aero.bombardier.net object Bel_LAN_172
access-list 101 extended permit ip object Garching_LAN object-group BA_Sites
pager lines 24
logging enable
logging timestamp
logging buffered warnings
logging trap informational
logging asdm informational
logging host outside 172.25.5.102
mtu management 1500
mtu inside 1500
mtu outside 1500
failover
failover lan unit primary
failover lan interface Failover_Link Vlan950
failover polltime interface msec 500 holdtime 5
failover key *****
failover interface ip Failover_Link 192.168.124.1 255.255.255.0 standby 192.168.124.2
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-731-101.bin
asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (inside,outside) source static Gar_LAN Gar_LAN destination static BA_Sites BA_Sites no-proxy-arp route-lookup
route outside 0.0.0.0 0.0.0.0 ************* 1
route inside 10.65.1.0 255.255.255.255 10.65.1.6 1
route inside 10.65.1.16 255.255.255.240 10.65.1.6 1
route inside 10.65.1.32 255.255.255.240 10.65.1.6 1
route inside 10.65.1.48 255.255.255.240 10.65.1.6 1
route inside 10.65.1.64 255.255.255.240 10.65.1.6 1
route inside 10.65.1.128 255.255.255.128 10.65.1.6 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
user-identity default-domain LOCAL
aaa authentication ssh console LOCAL
aaa authentication telnet console LOCAL
http server enable
http 10.65.1.0 255.255.255.0 inside
http 172.25.5.0 255.255.255.0 inside
http 10.65.1.21 255.255.255.255 management
snmp-server host inside 172.25.49.0 community ***** udp-port 161
snmp-server host outside 172.25.49.0 community *****
snmp-server host inside 172.25.5.101 community ***** udp-port 161
snmp-server host outside 172.25.5.101 community *****
snmp-server host inside 172.25.81.88 poll community *****
snmp-server host outside 172.25.81.88 poll community *****
snmp-server location:
snmp-server contact
snmp-server community *****
snmp-server enable traps syslog
crypto ipsec ikev2 ipsec-proposal aes256
protocol esp encryption aes-256
protocol esp integrity sha-1
crypto ipsec security-association lifetime seconds 3600
crypto ipsec security-association pmtu-aging infinite
crypto map GARCH 10 match address 101
crypto map GARCH 10 set pfs group19
crypto map GARCH 10 set peer *******************
crypto map GARCH 10 set ikev2 ipsec-proposal aes256
crypto map GARCH 10 set security-association lifetime seconds 3600
crypto map GARCH interface outside
crypto ca trustpool policy
no crypto isakmp nat-traversal
crypto ikev2 policy 10
encryption aes-256
integrity sha256
group 19
prf sha256
lifetime seconds 86400
crypto ikev2 enable outside
telnet 10.65.1.6 255.255.255.255 inside
telnet timeout 5
ssh stricthostkeycheck
ssh 172.25.5.0 255.255.255.0 inside
ssh 172.19.9.49 255.255.255.255 inside
ssh 172.25.5.0 255.255.255.0 outside
ssh 172.19.9.49 255.255.255.255 outside
ssh timeout 30
ssh version 2
ssh key-exchange group dh-group1-sha1
console timeout 30
management-access inside
dhcprelay server 172.25.81.1 outside
dhcprelay server 172.25.49.1 outside
dhcprelay enable inside
dhcprelay timeout 60
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ntp server 172.19.109.41
ntp server 172.19.109.42
ntp server 172.19.9.49 source outside
tunnel-group ********* type ipsec-l2l
tunnel-group ********* ipsec-attributes
ikev2 remote-authentication pre-shared-key *****
ikev2 local-authentication pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect ip-options
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:25ad9bf6db66a31e840ad96f49cd7e37
: end
I believe when a VPN tunnel is setup there should be one Child sa per subnet. The internal network of 10.65.1.0/24 should be setup with a child sa to the networks that were specified above depending on if there is traffic destined for them. What I am seeing is multiple child sa setup for the same subnet like the example below:
GARPR-COM1-WF01# sh crypto ikev2 sa | i 172.19
remote selector 172.19.0.0/0 - 172.19.255.255/65535
remote selector 172.19.0.0/0 - 172.19.255.255/65535
remote selector 172.19.0.0/0 - 172.19.255.255/65535
remote selector 172.19.0.0/0 - 172.19.255.255/65535
remote selector 172.19.0.0/0 - 172.19.255.255/65535
remote selector 172.19.0.0/0 - 172.19.255.255/65535
remote selector 172.19.0.0/0 - 172.19.255.255/65535
remote selector 172.19.0.0/0 - 172.19.255.255/65535
remote selector 172.19.0.0/0 - 172.19.255.255/65535
remote selector 172.19.0.0/0 - 172.19.255.255/65535
where for destination network 10.92.0.0/16 there is only one child sa:
GARPR-COM1-WF01# sh crypto ikev2 sa | i 10.92
remote selector 10.92.0.0/0 - 10.92.255.255/6553
Should this be the case or does anyone have any idea why there is multiple child sa setup for the same subnet?
Thanks
JonathanHi there,
I had same issue with PIX 506E and it was not even a circuit issue and I got ride of it and problem got fixed with PIX515E
I don't know, the device is too old to stay alive.
thanks -
Cisco ASA, skipping real source port number with PAT.
Hi Experts,
Cisco ASA configuration guide says:
"PAT translates multiple real addresses to a single mapped IP address by translating the real address and source port to the mapped address and a unique port. If available, the real source port number is used for the mapped port. "
Is it possible to skip this ? I do not want to use real source port number. The issue is, when I have a PAT entry with real source port (port 5060), - SIP session doesn't work. With all the other ports numbers,- everything works.Hi,
Notice that the configuration you try does not modify the real source port at all.
Since you are using the same "object" for the real/mapped service then the configuration above matches traffic where the connections destination is "any" and the destination is "udp 6000 65535" and only when the source is "udp sip" and in that event it keeps the exact same "udp sip" source port as you are using the same "object".
I am not sure if its a software or configuration related issue but I have not gotten this to work reliably on my ASA. I might have to try some other software level.
I guess you would want to match the SIP source port in the Dynamic PAT and avoid using the SIP port as the mapped port?. With that in mind I was thinking something like this
object service UDP-SIP
service udp source eq sip
object service UDP-SIP-MAPPED
service udp source range 30000 31000
nat (VoiP,outside) source dynamic <source network object> interface service UDP-SIP UDP-SIP-MAPPED
Though it seems the above configuration seems to be bypassed by the ASA completely and it seems to use the identical source port as the mapped port even though it matches the configuration.
If I were to change the above configuration from "dynamic" to "static" then the configuration matches but it uses only the first mapped "source" port of "30000". I guess it would only use a different mapped port if you used multiple real source ports also instead of the current single source port "sip".
nat (VoiP,outside) source static <source network object> interface service UDP-SIP UDP-SIP-MAPPED unidirectional
Example from my own ASA.
DYNAMIC
- Matches the configuration but doesnt map the port at all
Phase: 5
Type: NAT
Subtype:
Result: ALLOW
Config:
nat (LAN,WAN) source dynamic LAN-NETWORK interface service SIP SIP-MAPPED
Additional Information:
Dynamic translate 10.0.0.123/5060 to <my pat ip>/5060
STATIC
- Matches the configuration and maps the source port but only uses the first mapped port from the range
Phase: 4
Type: NAT
Subtype:
Result: ALLOW
Config:
nat (LAN,WAN) source static LAN-NETWORK interface service SIP SIP-MAPPED unidirectional
Additional Information:
Static translate 10.0.0.123/5060 to <my pat ip>/30000
I am not really sure if this configuration is reliable at all but its the only thing I can think of at the moment.
Hope this helps :)
- Jouni -
Internet Connection Became Slow after Introduction of Cisco ASA 5505 to the Network
I configured a Cisco ASA 5505 (Version Cisco Adaptive Security Appliance Software Version 7.2(3)
Device Manager Version 5.2(3)
in transparent firewall mode and inserted after Cisco 1700 router. However, the internet connection became very slow and users are compaining that they cannot load any pages.
My setup looks like:
Internet --> Cisco 1700 --> Cisco ASA 5505 --> LAN
The license information is:
Licensed features for this platform:
Maximum Physical Interfaces : 8
VLANs : 3, DMZ Restricted
Inside Hosts : Unlimited
Failover : Disabled
VPN-DES : Enabled
VPN-3DES-AES : Enabled
VPN Peers : 10
WebVPN Peers : 2
Dual ISPs : Disabled
VLAN Trunk Ports : 0
This platform has a Base license.
The flash activation key is the SAME as the running key.
My running-config looks like:
ASA Version 7.2(3)
firewall transparent
hostname ciscoasa
domain-name default.domain.invalid
enable password 8Ry2YjIyt7RRXU24 encrypted
names
interface Vlan1
nameif inside
security-level 100
no shut
interface Vlan2
nameif outside
security-level 0
no shut
interface Ethernet0/0
switchport access vlan 2
no shut
interface Ethernet0/1
no shut
interface Ethernet0/2
no shut
interface Ethernet0/3
no shut
interface Ethernet0/4
no shut
interface Ethernet0/5
no shut
interface Ethernet0/6
no shut
interface Ethernet0/7
no shut
passwd 2KFQnbNIdI.2KYOU encrypted
regex urllist1 ".*\.([Ee][Xx][Ee]|[Cc][Oo][Mm]|[Bb][Aa][Tt]) HTTP/1.[01]"
regex urllist2 ".*\.([Pp][Ii][Ff]|[Vv][Bb][Ss]|[Ww][Ss][Hh]) HTTP/1.[01]"
regex urllist3 ".*\.([Dd][Oo][Cc]|[Xx][Ll][Ss]|[Pp][Pp][Tt]) HTTP/1.[01]"
regex urllist4 ".*\.([Zz][Ii][Pp]|[Tt][Aa][Rr]|[Tt][Gg][Zz]) HTTP/1.[01]"
regex domainlist1 "\.facebook\.com"
regex domainlist2 "\.diretube\.com"
regex domainlist3 "\.youtube\.com"
regex domainlist4 "\.vimeo\.com"
regex applicationheader "application/.*"
regex contenttype "Content-Type"
ftp mode passive
dns server-group DefaultDNS
domain-name default.domain.invalid
access-list outside_in extended permit ip any any
access-list inside_mpc extended permit tcp any any eq www
access-list inside_mpc extended permit tcp any any eq 8080
pager lines 24
mtu outside 1500
mtu inside 1500
ip address 192.168.1.254 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
access-group outside_in in interface outside
route outside 0.0.0.0 0.0.0.0 192.168.1.1 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
telnet timeout 5
ssh timeout 5
console timeout 0
class-map type regex match-any DomainBlockList
match regex domainlist1
match regex domainlist2
match regex domainlist3
match regex domainlist4
class-map type inspect http match-all BlockDomainsClass
match request header host regex class DomainBlockList
class-map type regex match-any URLBlockList
match regex urllist1
match regex urllist2
match regex urllist3
match regex urllist4
class-map inspection_default
match default-inspection-traffic
class-map type inspect http match-all AppHeaderClass
match response header regex contenttype regex applicationheader
class-map httptraffic
match access-list inside_mpc
class-map type inspect http match-all BlockURLsClass
match request uri regex class URLBlockList
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map type inspect http http_inspection_policy
parameters
protocol-violation action drop-connection
class AppHeaderClass
drop-connection log
match request method connect
drop-connection log
class BlockDomainsClass
reset log
class BlockURLsClass
reset log
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
policy-map inside-policy
class httptraffic
inspect http http_inspection_policy
service-policy global_policy global
service-policy inside-policy interface inside
prompt hostname context
Cryptochecksum:8ab1a53df6ae3c202aee236d6080edfd
: end
Could the slow internet connection be due to license limitations? Or is there something wrong with my configuration?
Please see the configuration and help.
ThanksI have re-configured the ASA 5505 yesterday and so far it's working fine. I am not sure if the problem will re-appear later on. Anyways here is my sh tech-support
ciscoasa# sh tech-support
Cisco Adaptive Security Appliance Software Version 7.2(3)
Device Manager Version 5.2(3)
Compiled on Wed 15-Aug-07 16:08 by builders
System image file is "disk0:/asa723-k8.bin"
Config file at boot was "startup-config"
ciscoasa up 14 hours 16 mins
Hardware: ASA5505, 256 MB RAM, CPU Geode 500 MHz
Internal ATA Compact Flash, 128MB
BIOS Flash M50FW080 @ 0xffe00000, 1024KB
Encryption hardware device : Cisco ASA-5505 on-board accelerator (revision 0x0)
Boot microcode : CNlite-MC-Boot-Cisco-1.2
SSL/IKE microcode: CNlite-MC-IPSEC-Admin-3.03
IPSec microcode : CNlite-MC-IPSECm-MAIN-2.04
0: Int: Internal-Data0/0 : address is 001f.9ee8.ffa2, irq 11
1: Ext: Ethernet0/0 : address is 001f.9ee8.ff9a, irq 255
2: Ext: Ethernet0/1 : address is 001f.9ee8.ff9b, irq 255
3: Ext: Ethernet0/2 : address is 001f.9ee8.ff9c, irq 255
4: Ext: Ethernet0/3 : address is 001f.9ee8.ff9d, irq 255
5: Ext: Ethernet0/4 : address is 001f.9ee8.ff9e, irq 255
6: Ext: Ethernet0/5 : address is 001f.9ee8.ff9f, irq 255
<--- More --->
7: Ext: Ethernet0/6 : address is 001f.9ee8.ffa0, irq 255
8: Ext: Ethernet0/7 : address is 001f.9ee8.ffa1, irq 255
9: Int: Internal-Data0/1 : address is 0000.0003.0002, irq 255
10: Int: Not used : irq 255
11: Int: Not used : irq 255
Licensed features for this platform:
Maximum Physical Interfaces : 8
VLANs : 3, DMZ Restricted
Inside Hosts : Unlimited
Failover : Disabled
VPN-DES : Enabled
VPN-3DES-AES : Enabled
VPN Peers : 10
WebVPN Peers : 2
Dual ISPs : Disabled
VLAN Trunk Ports : 0
This platform has a Base license.
Serial Number: JMX1211Z2N4
Running Activation Key: 0xaf0ed046 0xbcf18ebf 0x80b38508 0xba785cc0 0x05250493
Configuration register is 0x1
Configuration has not been modified since last system restart.
<--- More --->
------------------ show clock ------------------
18:32:58.254 UTC Tue Nov 26 2013
------------------ show memory ------------------
Free memory: 199837144 bytes (74%)
Used memory: 68598312 bytes (26%)
Total memory: 268435456 bytes (100%)
------------------ show conn count ------------------
1041 in use, 2469 most used
------------------ show xlate count ------------------
0 in use, 0 most used
------------------ show blocks ------------------
SIZE MAX LOW CNT
0 100 68 100
<--- More --->
4 300 299 299
80 100 92 100
256 100 94 100
1550 6174 6166 6174
2048 1124 551 612
------------------ show blocks queue history detail ------------------
History buffer memory usage: 2136 bytes (default)
------------------ show interface ------------------
Interface Internal-Data0/0 "", is up, line protocol is up
Hardware is y88acs06, BW 1000 Mbps
(Full-duplex), (1000 Mbps)
MAC address 001f.9ee8.ffa2, MTU not set
IP address unassigned
18491855 packets input, 11769262614 bytes, 0 no buffer
Received 213772 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 L2 decode drops, 0 demux drops
18185861 packets output, 11626494317 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 late collisions, 0 deferred
<--- More --->
0 input reset drops, 0 output reset drops
input queue (curr/max packets): hardware (0/0) software (0/0)
output queue (curr/max packets): hardware (0/55) software (0/0)
Control Point Interface States:
Interface number is unassigned
Interface Internal-Data0/1 "", is administratively down, line protocol is up
Hardware is 88E6095, BW 1000 Mbps
(Full-duplex), (1000 Mbps)
MAC address 0000.0003.0002, MTU not set
IP address unassigned
18184216 packets input, 11625360131 bytes, 0 no buffer
Received 206655 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 switch ingress policy drops
18490057 packets output, 11768078777 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 switch egress policy drops
Control Point Interface States:
Interface number is unassigned
Interface Loopback0 "_internal_loopback", is up, line protocol is up
Hardware is VirtualMAC address 0000.0000.0000, MTU 1500
IP address 127.1.0.1, subnet mask 255.255.0.0
<--- More --->
Traffic Statistics for "_internal_loopback":
1 packets input, 28 bytes
1 packets output, 28 bytes
1 packets dropped
1 minute input rate 0 pkts/sec, 0 bytes/sec
1 minute output rate 0 pkts/sec, 0 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 0 pkts/sec, 0 bytes/sec
5 minute output rate 0 pkts/sec, 0 bytes/sec
5 minute drop rate, 0 pkts/sec
Control Point Interface States:
Interface number is 28
Interface config status is active
Interface state is active
Interface Vlan1 "inside", is up, line protocol is up
Hardware is EtherSVI
MAC address 001f.9ee8.ffa2, MTU 1500
IP address 192.168.1.254, subnet mask 255.255.255.0
Traffic Statistics for "inside":
7742275 packets input, 903584114 bytes
10645034 packets output, 10347291114 bytes
184883 packets dropped
1 minute input rate 320 pkts/sec, 35404 bytes/sec
1 minute output rate 325 pkts/sec, 313317 bytes/sec
<--- More --->
1 minute drop rate, 17 pkts/sec
5 minute input rate 399 pkts/sec, 59676 bytes/sec
5 minute output rate 483 pkts/sec, 503200 bytes/sec
5 minute drop rate, 9 pkts/sec
Control Point Interface States:
Interface number is 1
Interface config status is active
Interface state is active
Interface Vlan2 "outside", is up, line protocol is up
Hardware is EtherSVI
MAC address 001f.9ee8.ffa3, MTU 1500
IP address 192.168.1.254, subnet mask 255.255.255.0
Traffic Statistics for "outside":
10750090 packets input, 10432619059 bytes
7541331 packets output, 870613684 bytes
109911 packets dropped
1 minute input rate 328 pkts/sec, 313770 bytes/sec
1 minute output rate 301 pkts/sec, 32459 bytes/sec
1 minute drop rate, 2 pkts/sec
5 minute input rate 485 pkts/sec, 503789 bytes/sec
5 minute output rate 387 pkts/sec, 57681 bytes/sec
5 minute drop rate, 2 pkts/sec
Control Point Interface States:
Interface number is 2
<--- More --->
Interface config status is active
Interface state is active
Interface Ethernet0/0 "", is up, line protocol is up
Hardware is 88E6095, BW 100 Mbps
Auto-Duplex(Full-duplex), Auto-Speed(100 Mbps)
Available but not configured via nameif
MAC address 001f.9ee8.ff9a, MTU not set
IP address unassigned
10749794 packets input, 10630700889 bytes, 0 no buffer
Received 2506 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 L2 decode drops
3 switch ingress policy drops
7541070 packets output, 1028190148 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 rate limit drops
0 switch egress policy drops
Control Point Interface States:
Interface number is unassigned
Interface Ethernet0/1 "", is up, line protocol is up
Hardware is 88E6095, BW 100 Mbps
Auto-Duplex(Full-duplex), Auto-Speed(100 Mbps)
<--- More --->
Available but not configured via nameif
MAC address 001f.9ee8.ff9b, MTU not set
IP address unassigned
7741977 packets input, 1064586806 bytes, 0 no buffer
Received 211282 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 L2 decode drops
0 switch ingress policy drops
10644663 packets output, 10543362751 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 rate limit drops
0 switch egress policy drops
Control Point Interface States:
Interface number is unassigned
Interface Ethernet0/2 "", is down, line protocol is down
Hardware is 88E6095, BW 100 Mbps
Auto-Duplex, Auto-Speed
Available but not configured via nameif
MAC address 001f.9ee8.ff9c, MTU not set
IP address unassigned
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants
<--- More --->
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 L2 decode drops
0 switch ingress policy drops
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 rate limit drops
0 switch egress policy drops
Control Point Interface States:
Interface number is unassigned
Interface Ethernet0/3 "", is down, line protocol is down
Hardware is 88E6095, BW 100 Mbps
Auto-Duplex, Auto-Speed
Available but not configured via nameif
MAC address 001f.9ee8.ff9d, MTU not set
IP address unassigned
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 L2 decode drops
0 switch ingress policy drops
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
<--- More --->
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 rate limit drops
0 switch egress policy drops
Control Point Interface States:
Interface number is unassigned
Interface Ethernet0/4 "", is down, line protocol is down
Hardware is 88E6095, BW 100 Mbps
Auto-Duplex, Auto-Speed
Available but not configured via nameif
MAC address 001f.9ee8.ff9e, MTU not set
IP address unassigned
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 L2 decode drops
0 switch ingress policy drops
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 rate limit drops
0 switch egress policy drops
Control Point Interface States:
<--- More --->
Interface number is unassigned
Interface Ethernet0/5 "", is down, line protocol is down
Hardware is 88E6095, BW 100 Mbps
Auto-Duplex, Auto-Speed
Available but not configured via nameif
MAC address 001f.9ee8.ff9f, MTU not set
IP address unassigned
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 L2 decode drops
0 switch ingress policy drops
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 rate limit drops
0 switch egress policy drops
Control Point Interface States:
Interface number is unassigned
Interface Ethernet0/6 "", is down, line protocol is down
Hardware is 88E6095, BW 100 Mbps
Auto-Duplex, Auto-Speed
Available but not configured via nameif
<--- More --->
MAC address 001f.9ee8.ffa0, MTU not set
IP address unassigned
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 L2 decode drops
0 switch ingress policy drops
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 rate limit drops
0 switch egress policy drops
Control Point Interface States:
Interface number is unassigned
Interface Ethernet0/7 "", is down, line protocol is down
Hardware is 88E6095, BW 100 Mbps
Auto-Duplex, Auto-Speed
Available but not configured via nameif
MAC address 001f.9ee8.ffa1, MTU not set
IP address unassigned
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
<--- More --->
0 L2 decode drops
0 switch ingress policy drops
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 rate limit drops
0 switch egress policy drops
Control Point Interface States:
Interface number is unassigned
------------------ show cpu usage ------------------
CPU utilization for 5 seconds = 12%; 1 minute: 11%; 5 minutes: 11%
------------------ show cpu hogging process ------------------
Process: Dispatch Unit, NUMHOG: 1, MAXHOG: 133, LASTHOG: 140
LASTHOG At: 04:45:59 UTC Nov 26 2013
PC: 8be0f7
Traceback: 8bed19 8bf553 302b87 3030a5 2fad69 7674bf 75ca16
c6251d c62a4c c62f6c 75c653 767820 797f64 769c85
<--- More --->
------------------ show process ------------------
PC SP STATE Runtime SBASE Stack Process
Mwe 00c9bb24 01bb8700 013e3250 0 01733fc8 15616/16384 emweb/cifs
Lwe 001072ac 0176f9c4 013e32d0 0 0176d9f0 8132/8192 block_diag
Mrd 00223a67 01783d5c 013e33b0 314854 0177be18 25752/32768 Dispatch Unit
Msi 00f82847 01b07b84 013e3250 229 01b05bc0 7984/8192 y88acs06 OneSec Thread
Mwe 0011b1a5 01b09cfc 013e3250 0 01b07d88 7864/8192 Reload Control Thread
Mwe 00120606 01b1260c 013e5258 0 01b10988 7256/8192 aaa
Mwe 001486aa 01b19404 013e5ae8 0 01b15450 16020/16384 CMGR Server Process
Mwe 0014c3c5 01b1b4d4 013e3250 0 01b19570 7968/8192 CMGR Timer Process
Lwe 002227a1 01b239b4 013ee360 0 01b219f0 7524/8192 dbgtrace
Mwe 004e1ba5 01b29c34 013e3250 157 01b27d50 6436/8192 eswilp_svi_init
Mwe 01064b1d 01b4a7f4 013e3250 0 01b48890 7848/8192 Chunk Manager
Msi 008b61b6 01b52d54 013e3250 230 01b50da0 7856/8192 PIX Garbage Collector
Lsi 00ecb6ac 01b54e94 013e3250 12 01b52ec0 7552/8192 route_process
Mwe 008a5ddc 01b5dc04 0133b430 0 01b5bc40 8116/8192 IP Address Assign
Mwe 00acb779 01b60604 01346e10 0 01b5e640 8116/8192 QoS Support Module
Mwe 0091eba9 01b6275c 0133c530 0 01b60798 8116/8192 Client Update Task
Lwe 01083c8e 01b656d4 013e3250 123088 01b63770 7840/8192 Checkheaps
Mwe 00acfd7d 01b6b824 013e3250 623 01b69ad0 3476/8192 Quack process
Mwe 00b2a260 01b6dad4 013e3250 22 01b6bbf0 7364/8192 Session Manager
Mwe 00c55efd 01b78564 031d0478 4 01b74a50 14768/16384 uauth
<--- More --->
Mwe 00be3c9e 01b7aaec 0135c010 0 01b78b28 7524/8192 Uauth_Proxy
Mwe 00c52759 01b80e0c 01361770 0 01b7ee88 7712/8192 SMTP
Mwe 00c3f7b9 01b82eec 01361710 0 01b80fa8 7412/8192 Logger
Mwe 00c3fd26 01b8502c 013e3250 0 01b830c8 7492/8192 Thread Logger
Mwe 00f62272 01b9596c 013ac520 0 01b939c8 7188/8192 vpnlb_thread
Msi 00b4097c 01c598c4 013e3250 190 01c578f0 8000/8192 emweb/cifs_timer
Msi 005bd338 017a909c 013e3250 25855 017a7108 7412/8192 arp_timer
Mwe 005c76bc 01b486e4 013fba50 20643 01b46770 7348/8192 arp_forward_thread
Mwe 00c5a919 023fa5fc 013619e0 0 023f8648 7968/8192 tcp_fast
Mwe 00c5a6e5 023fc624 013619e0 0 023fa670 7968/8192 tcp_slow
Mwe 00c754d1 0240d42c 013628a0 0 0240b478 8100/8192 udp_timer
Mwe 0019cb17 01b404a4 013e3250 0 01b3e530 7984/8192 CTCP Timer process
Mwe 00efe8b3 0308c15c 013e3250 0 0308a208 7952/8192 L2TP data daemon
Mwe 00efef23 0308e194 013e3250 0 0308c230 7968/8192 L2TP mgmt daemon
Mwe 00eea02b 030c62ac 013a5c10 43 030c2338 16244/16384 ppp_timer_thread
Msi 00f62d57 030c82f4 013e3250 264 030c6360 7924/8192 vpnlb_timer_thread
Mwe 001b96e6 01b7cbbc 01b1e9c8 1 01b7ac48 7728/8192 IPsec message handler
Msi 001c9bac 01b8d4dc 013e3250 2917 01b8b548 7648/8192 CTM message handler
Mwe 00af93b8 031465b4 013e3250 0 03144640 7984/8192 ICMP event handler
Mwe 00831003 0314a724 013e3250 387 031467b0 16100/16384 IP Background
Mwe 0021b267 031a83c4 013123c0 31 03188450 123488/131072 tmatch compile thread
Mwe 009f2405 03290044 013e3250 0 0328c0c0 16072/16384 Crypto PKI RECV
Mwe 009f305a 03294144 013e3250 0 032901e0 16040/16384 Crypto CA
Mwe 0064d4fd 01b3e24c 013e3250 8 01b3c2f8 7508/8192 ESW_MRVL switch interrupt service
<--- More --->
Msi 00646f5c 032c134c 013e3250 3059378 032bf448 7184/8192 esw_stats
Lsi 008cbb80 032dc704 013e3250 3 032da730 7908/8192 uauth_urlb clean
Lwe 008afee7 034a0914 013e3250 197 0349e9b0 6636/8192 pm_timer_thread
Mwe 0052f0bf 034a35ac 013e3250 0 034a1648 7968/8192 IKE Timekeeper
Mwe 00520f6b 034a8adc 0132e2b0 0 034a4e38 15448/16384 IKE Daemon
Mwe 00bf5c78 034ac7ac 01360680 0 034aa7f8 8100/8192 RADIUS Proxy Event Daemon
Mwe 00bc32de 034ae79c 034dcbe0 0 034ac918 7208/8192 RADIUS Proxy Listener
Mwe 00bf5e0f 034b099c 013e3250 0 034aea38 7968/8192 RADIUS Proxy Time Keeper
Mwe 005aac4c 034b3154 013fb980 0 034b1250 7492/8192 Integrity FW Task
M* 008550a5 0009fefc 013e33b0 3183 034e3b20 24896/32768 ci/console
Msi 008eb694 034ed9d4 013e3250 2370 034ebc40 6176/8192 update_cpu_usage
Msi 008e6415 034f7dac 013e3250 1096 034f5eb8 6124/8192 NIC status poll
Mwe 005b63e6 03517d1c 013fbd10 1963 03515d78 7636/8192 IP Thread
Mwe 005becbe 03519e4c 013fbcb0 3 03517e98 7384/8192 ARP Thread
Mwe 004c2b36 0351befc 013fbae0 0 03519fe8 7864/8192 icmp_thread
Mwe 00c7722e 0351e06c 013e3250 0 0351c108 7848/8192 udp_thread
Mwe 00c5d126 0352008c 013fbd00 0 0351e228 7688/8192 tcp_thread
Mwe 00bc32de 03a6982c 03a5ee18 0 03a679b8 7512/8192 EAPoUDP-sock
Mwe 00266c15 03a6b614 013e3250 0 03a699e0 7032/8192 EAPoUDP
Mwe 005a6728 01b27b94 013e3250 0 01b25c30 7968/8192 Integrity Fw Timer Thread
- - - - 47686621 - - scheduler
- - - - 51253819 - - total elapsed
------------------ show failover ------------------
<--- More --->
ERROR: Command requires failover license
------------------ show traffic ------------------
inside:
received (in 51429.740 secs):
7749585 packets905087345 bytes
67 pkts/sec17013 bytes/sec
transmitted (in 51429.740 secs):
10653162 packets10355908020 bytes
40 pkts/sec201026 bytes/sec
1 minute input rate 412 pkts/sec, 51803 bytes/sec
1 minute output rate 475 pkts/sec, 522952 bytes/sec
1 minute drop rate, 24 pkts/sec
5 minute input rate 399 pkts/sec, 59676 bytes/sec
5 minute output rate 483 pkts/sec, 503200 bytes/sec
5 minute drop rate, 9 pkts/sec
outside:
received (in 51430.240 secs):
10758403 packets10441440193 bytes
42 pkts/sec203021 bytes/sec
transmitted (in 51430.240 secs):
7548339 packets872053854 bytes
<--- More --->
63 pkts/sec16037 bytes/sec
1 minute input rate 479 pkts/sec, 523680 bytes/sec
1 minute output rate 387 pkts/sec, 46796 bytes/sec
1 minute drop rate, 3 pkts/sec
5 minute input rate 485 pkts/sec, 503789 bytes/sec
5 minute output rate 387 pkts/sec, 57681 bytes/sec
5 minute drop rate, 2 pkts/sec
_internal_loopback:
received (in 51430.740 secs):
1 packets28 bytes
0 pkts/sec0 bytes/sec
transmitted (in 51430.740 secs):
1 packets28 bytes
0 pkts/sec0 bytes/sec
1 minute input rate 0 pkts/sec, 0 bytes/sec
1 minute output rate 0 pkts/sec, 0 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 0 pkts/sec, 0 bytes/sec
5 minute output rate 0 pkts/sec, 0 bytes/sec
5 minute drop rate, 0 pkts/sec
Aggregated Traffic on Physical Interface
<--- More --->
Ethernet0/0:
received (in 51431.740 secs):
10758462 packets10640075825 bytes
42 pkts/sec206042 bytes/sec
transmitted (in 51431.740 secs):
7548383 packets1029818127 bytes
63 pkts/sec20023 bytes/sec
1 minute input rate 485 pkts/sec, 537048 bytes/sec
1 minute output rate 395 pkts/sec, 54546 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 485 pkts/sec, 511723 bytes/sec
5 minute output rate 387 pkts/sec, 65495 bytes/sec
5 minute drop rate, 0 pkts/sec
Ethernet0/1:
received (in 51433.570 secs):
7749780 packets1066328930 bytes
67 pkts/sec20064 bytes/sec
transmitted (in 51433.570 secs):
10653359 packets10552787020 bytes
40 pkts/sec205006 bytes/sec
1 minute input rate 419 pkts/sec, 59621 bytes/sec
1 minute output rate 480 pkts/sec, 533950 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 399 pkts/sec, 67618 bytes/sec
<--- More --->
5 minute output rate 482 pkts/sec, 511073 bytes/sec
5 minute drop rate, 0 pkts/sec
Ethernet0/2:
received (in 51434.730 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
transmitted (in 51434.730 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
1 minute input rate 0 pkts/sec, 0 bytes/sec
1 minute output rate 0 pkts/sec, 0 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 0 pkts/sec, 0 bytes/sec
5 minute output rate 0 pkts/sec, 0 bytes/sec
5 minute drop rate, 0 pkts/sec
Ethernet0/3:
received (in 51434.730 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
transmitted (in 51434.730 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
1 minute input rate 0 pkts/sec, 0 bytes/sec
1 minute output rate 0 pkts/sec, 0 bytes/sec
<--- More --->
1 minute drop rate, 0 pkts/sec
5 minute input rate 0 pkts/sec, 0 bytes/sec
5 minute output rate 0 pkts/sec, 0 bytes/sec
5 minute drop rate, 0 pkts/sec
Ethernet0/4:
received (in 51434.870 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
transmitted (in 51434.870 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
1 minute input rate 0 pkts/sec, 0 bytes/sec
1 minute output rate 0 pkts/sec, 0 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 0 pkts/sec, 0 bytes/sec
5 minute output rate 0 pkts/sec, 0 bytes/sec
5 minute drop rate, 0 pkts/sec
Ethernet0/5:
received (in 51434.870 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
transmitted (in 51434.870 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
<--- More --->
1 minute input rate 0 pkts/sec, 0 bytes/sec
1 minute output rate 0 pkts/sec, 0 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 0 pkts/sec, 0 bytes/sec
5 minute output rate 0 pkts/sec, 0 bytes/sec
5 minute drop rate, 0 pkts/sec
Ethernet0/6:
received (in 51435.010 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
transmitted (in 51435.010 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
1 minute input rate 0 pkts/sec, 0 bytes/sec
1 minute output rate 0 pkts/sec, 0 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 0 pkts/sec, 0 bytes/sec
5 minute output rate 0 pkts/sec, 0 bytes/sec
5 minute drop rate, 0 pkts/sec
Ethernet0/7:
received (in 51435.010 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
transmitted (in 51435.010 secs):
<--- More --->
0 packets0 bytes
0 pkts/sec0 bytes/sec
1 minute input rate 0 pkts/sec, 0 bytes/sec
1 minute output rate 0 pkts/sec, 0 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 0 pkts/sec, 0 bytes/sec
5 minute output rate 0 pkts/sec, 0 bytes/sec
5 minute drop rate, 0 pkts/sec
Internal-Data0/0:
received (in 51435.510 secs):
18513901 packets11784250044 bytes
25 pkts/sec229023 bytes/sec
transmitted (in 51435.510 secs):
18207269 packets11641332179 bytes
19 pkts/sec226078 bytes/sec
1 minute input rate 891 pkts/sec, 595715 bytes/sec
1 minute output rate 863 pkts/sec, 588935 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 885 pkts/sec, 584035 bytes/sec
5 minute output rate 870 pkts/sec, 580393 bytes/sec
5 minute drop rate, 0 pkts/sec
Internal-Data0/1:
received (in 51436.010 secs):
18207323 packets11641364184 bytes
<--- More --->
19 pkts/sec226076 bytes/sec
transmitted (in 51436.010 secs):
18513954 packets11784281987 bytes
25 pkts/sec229022 bytes/sec
1 minute input rate 855 pkts/sec, 575808 bytes/sec
1 minute output rate 884 pkts/sec, 582339 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 869 pkts/sec, 578350 bytes/sec
5 minute output rate 883 pkts/sec, 581924 bytes/sec
5 minute drop rate, 0 pkts/sec
------------------ show perfmon ------------------
PERFMON STATS: Current Average
Xlates 0/s 0/s
Connections 17/s 6/s
TCP Conns 8/s 2/s
UDP Conns 7/s 2/s
URL Access 0/s 0/s
URL Server Req 0/s 0/s
TCP Fixup 0/s 0/s
TCP Intercept 0/s 0/s
HTTP Fixup 0/s 0/s
<--- More --->
FTP Fixup 0/s 0/s
AAA Authen 0/s 0/s
AAA Author 0/s 0/s
AAA Account 0/s 0/s
------------------ show counters ------------------
Protocol Counter Value Context
IP IN_PKTS 168960 Summary
IP OUT_PKTS 169304 Summary
IP TO_ARP 61 Summary
------------------ show history ------------------
------------------ show firewall ------------------
Firewall mode: Transparent
------------------ show running-config ------------------
<--- More --->
: Saved
ASA Version 7.2(3)
firewall transparent
hostname ciscoasa
enable password
names
interface Vlan1
nameif inside
security-level 100
interface Vlan2
nameif outside
security-level 0
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
<--- More --->
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
passwd
regex domain1 ".facebook\.com"
regex domain2 ".fb\.com"
regex domain3 ".youtube\.com"
ftp mode passive
access-list ACL_IN extended permit ip any any
pager lines 24
mtu inside 1500
mtu outside 1500
ip address 192.168.1.254 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-523.bin
no asdm history enable
<--- More --->
arp timeout 14400
access-group ACL_IN in interface outside
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
telnet timeout 5
ssh timeout 5
console timeout 0
class-map type regex match-any DomainBlockList
match regex domain1
match regex domain2
match regex domain3
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
<--- More --->
message-length maximum 512
match domain-name regex class DomainBlockList
drop-connection log
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
service-policy global_policy global
prompt hostname context
Cryptochecksum:bb5115ea1d14ee42e7961ef0c9aaed86
: end
<--- More --->
------------------ show startup-config errors ------------------
INFO: No configuration errors
------------------ console logs ------------------
Message #1 : Message #2 : Message #3 : Message #4 : Message #5 : Message #6 : Message #7 : Message #8 : Message #9 : Message #10 : Message #11 : Message #12 : Message #13 : Message #14 :
Total SSMs found: 0
Message #15 :
Total NICs found: 10
Message #16 : 88E6095 rev 2 Gigabit Ethernet @ index 09Message #17 : MAC: 0000.0003.0002
Message #18 : 88E6095 rev 2 Ethernet @ index 08Message #19 : MAC: 001f.9ee8.ffa1
Message #20 : 88E6095 rev 2 Ethernet @ index 07Message #21 : MAC: 001f.9ee8.ffa0
Message #22 : 88E6095 rev 2 Ethernet @ index 06Message #23 : MAC: 001f.9ee8.ff9f
Message #24 : 88E6095 rev 2 Ethernet @ index 05Message #25 : MAC: 001f.9ee8.ff9e
Message #26 : 88E6095 rev 2 Ethernet @ index 04Message #27 : MAC: 001f.9ee8.ff9d
Message #28 : 88E6095 rev 2 Ethernet @ index 03Message #29 : MAC: 001f.9ee8.ff9c
Message #30 : 88E6095 rev 2 Ethernet @ index 02Message #31 : MAC: 001f.9ee8.ff9b
Message #32 : 88E6095 rev 2 Ethernet @ index 01Message #33 : MAC: 001f.9ee8.ff9a
Message #34 : y88acs06 rev16 Gigabit Ethernet @ index 00 MAC: 001f.9ee8.ffa2
Message #35 :
Licensed features for this platform:
Message #36 : Maximum Physical Interfaces : 8
<--- More --->
Message #37 : VLANs : 3, DMZ Restricted
Message #38 : Inside Hosts : Unlimited
Message #39 : Failover : Disabled
Message #40 : VPN-DES : Enabled
Message #41 : VPN-3DES-AES : Enabled
Message #42 : VPN Peers : 10
Message #43 : WebVPN Peers : 2
Message #44 : Dual ISPs : Disabled
Message #45 : VLAN Trunk Ports : 0
Message #46 :
This platform has a Base license.
Message #47 :
Message #48 : Encryption hardware device : Cisco ASA-5505 on-board accelerator (revision 0x0)
Message #49 : Boot microcode : CNlite-MC-Boot-Cisco-1.2
Message #50 : SSL/IKE microcode: CNlite-MC-IPSEC-Admin-3.03
Message #51 : IPSec microcode : CNlite-MC-IPSECm-MAIN-2.04
Message #52 : --------------------------------------------------------------------------
Message #53 : . .
Message #54 : | |
Message #55 : ||| |||
Message #56 : .|| ||. .|| ||.
Message #57 : .:||| | |||:..:||| | |||:.
Message #58 : C i s c o S y s t e m s
Message #59 : --------------------------------------------------------------------------
<--- More --->
Message #60 :
Cisco Adaptive Security Appliance Software Version 7.2(3)
Message #61 :
Message #62 : ****************************** Warning *******************************
Message #63 : This product contains cryptographic features and is
Message #64 : subject to United States and local country laws
Message #65 : governing, import, export, transfer, and use.
Message #66 : Delivery of Cisco cryptographic products does not
Message #67 : imply third-party authority to import, export,
Message #68 : distribute, or use encryption. Importers, exporters,
Message #69 : distributors and users are responsible for compliance
Message #70 : with U.S. and local country laws. By using this
Message #71 : product you agree to comply with applicable laws and
Message #72 : regulations. If you are unable to comply with U.S.
Message #73 : and local laws, return the enclosed items immediately.
Message #74 :
Message #75 : A summary of U.S. laws governing Cisco cryptographic
Message #76 : products may be found at:
Message #77 : http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
Message #78 :
Message #79 : If you require further assistance please contact us by
Message #80 : sending email to [email protected].
Message #81 : ******************************* Warning *******************************
Message #82 :
<--- More --->
Message #83 : Copyright (c) 1996-2007 by Cisco Systems, Inc.
Message #84 : Restricted Rights Legend
Message #85 : Use, duplication, or disclosure by the Government is
Message #86 : subject to restrictions as set forth in subparagraph
Message #87 : (c) of the Commercial Computer Software - Restricted
Message #88 : Rights clause at FAR sec. 52.227-19 and subparagraph
Message #89 : (c) (1) (ii) of the Rights in Technical Data and Computer
Message #90 : Software clause at DFARS sec. 252.227-7013.
Message #91 : Cisco Systems, Inc.
Message #92 : 170 West Tasman Drive
Message #93 : San Jose, California 95134-1706
ciscoasa# -
Firewall Cisco ASA 5505 new interface license problem
Hi
I have one ASA 5505 with a Base License
The problem is when i want to use a new named interface the system says "With current License maximum number of named interfaces allowed is 3. Name cannot be set for this interface"
And the question is if with this base license the interface cannot be used or only cannot be named?
here the output of my firewall:
Cisco Adaptive Security Appliance Software Version 8.2(5)
Device Manager Version 6.4(5)
Hardware: ASA5505, 512 MB RAM, CPU Geode 500 MHz
Internal ATA Compact Flash, 128MB
BIOS Flash Firmware Hub @ 0xffe00000, 1024KB
Encryption hardware device : Cisco ASA-5505 on-board accelerator (revision 0x0)
Boot microcode : CN1000-MC-BOOT-2.00
SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
IPSec microcode : CNlite-MC-IPSECm-MAIN-2.05
0: Int: Internal-Data0/0 : address is e02f.6de6.7843, irq 11
1: Ext: Ethernet0/0 : address is e02f.6de6.783b, irq 255
2: Ext: Ethernet0/1 : address is e02f.6de6.783c, irq 255
3: Ext: Ethernet0/2 : address is e02f.6de6.783d, irq 255
4: Ext: Ethernet0/3 : address is e02f.6de6.783e, irq 255
5: Ext: Ethernet0/4 : address is e02f.6de6.783f, irq 255
6: Ext: Ethernet0/5 : address is e02f.6de6.7840, irq 255
7: Ext: Ethernet0/6 : address is e02f.6de6.7841, irq 255
8: Ext: Ethernet0/7 : address is e02f.6de6.7842, irq 255
9: Int: Internal-Data0/1 : address is 0000.0003.0002, irq 255
10: Int: Not used : irq 255
11: Int: Not used : irq 255
Licensed features for this platform:
Maximum Physical Interfaces : 8
VLANs : 3, DMZ Restricted
Inside Hosts : Unlimited
Failover : Disabled
VPN-DES : Enabled
VPN-3DES-AES : Enabled
SSL VPN Peers : 2
Total VPN Peers : 10
Dual ISPs : Disabled
VLAN Trunk Ports : 0
Shared License : Disabled
AnyConnect for Mobile : Disabled
AnyConnect for Cisco VPN Phone : Disabled
AnyConnect Essentials : Disabled
Advanced Endpoint Assessment : Disabled
UC Phone Proxy Sessions : 2
Total UC Proxy Sessions : 2
Botnet Traffic Filter : DisabledHi,
The ASA5505 has with Base License the limitation of 3 Vlan interface of which 1 is also limited in access (shown by the above output mentioning DMZ Restricted)
For an interface on the ASA to operate it must have a name with the command "nameif"
If you already have 3 Vlan interfaces in use then with this license you wont be able to configure 4th Vlan interface without getting a license that supports more interfaces. I guess that would be the Security Plus license.
I know that this has come as a surprise to several users that have posted here on the forums. I too think that its a needles "feature" in the ASA to limit the use of the device in such a way.
- Jouni -
Cisco ASA 5505 and comodo SSL certificate
Hey All,
I am having an issue with setting up the SSL certificate piece of the Cisco AnyConnect VPN. I purchased the certificate and installed it via the ASDM under Configuration > Remote Access VPN > Certificate Management > Identity Certificates. I also placed the CA 2 piece under the CA Certificates. I have http redirect to https and under my browser it is green.
Once the AnyConnect client installs and automatically connects i get no errors or anything. The minute I disconnect and try to reconnect again, I get the "Untrusted VPN Server Certificate!" which isn't true because the connection information is https://vpn.mydomain.com and the SSL Cert is setup as vpn.mydomain.com.
On that note it lists the IP address instead of the vpn.mydomain.com as the untrusted piece of this. Now obviously I don't have the IP address as part of the SSL cert, just the web address. On the web side I have an A record setup to go from vpn.mydomain.com to the IP address of the Cisco ASA.
What am I missing here? I can post config if anyone needs it.
(My Version of ASA Software is 9.0 (2) and ASDM Version 7.1 (2))It's AnyConnect version 3.0. I don't know about the EKU piece. I didn't know that was required. I will attach my config.
ASA Version 9.0(2)
hostname MyDomain-firewall-1
domain-name MyDomain.com
enable password omitted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
passwd omitted
names
name 10.0.0.13.1 MyDomain-Inside description MyDomain Inside
name 10.200.0.0 MyDomain_New_IP description MyDomain_New
name 10.100.0.0 MyDomain-Old description Inside_Old
name XXX.XXX.XX.XX Provider description Provider_Wireless
name 10.0.13.2 Cisco_ASA_5505 description Cisco ASA 5505
name 192.168.204.0 Outside_Wireless description Outside Wireless for Guests
ip local pool MyDomain-Employee-Pool 192.168.208.1-192.168.208.254 mask 255.255.255.0
ip local pool MyDomain-Vendor-Pool 192.168.209.1-192.168.209.254 mask 255.255.255.0
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address Cisco_ASA_5505 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address Provider 255.255.255.252
boot system disk0:/asa902-k8.bin
ftp mode passive
clock timezone PST -8
clock summer-time PDT recurring
dns domain-lookup inside
dns server-group DefaultDNS
name-server 10.0.3.21
domain-name MyDomain.com
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network MyDomain-Employee
subnet 192.168.208.0 255.255.255.0
description MyDomain-Employee
object-group network Inside-all
description All Networks
network-object MyDomain-Old 255.255.254.0
network-object MyDomain_New_IP 255.255.192.0
network-object host MyDomain-Inside
access-list inside_access_in extended permit ip any4 any4
access-list split-tunnel standard permit host 10.0.13.1
pager lines 24
logging enable
logging buffered errors
logging asdm informational
mtu inside 1500
mtu outside 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-712.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (inside,outside) source static Inside-all Inside-all destination static RVP-Employee RVP-Employee no-proxy-arp route-lookup
object network obj_any
nat (inside,outside) dynamic interface
access-group inside_access_in in interface inside
route outside 0.0.0.0 0.0.0.0 XXX.XXX.XX.XX 1
route inside MyDomain-Old 255.255.254.0 MyDomain-Inside 1
route inside MyDomain_New_IP 255.255.192.0 MyDomain-Inside 1
route inside Outside_Wireless 255.255.255.0 MyDomain-Inside 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
action terminate
dynamic-access-policy-record "Network Access Policy Allow VPN"
description "Must have the Network Access Policy Enabled to get VPN access"
aaa-server LDAP_Group protocol ldap
aaa-server LDAP_Group (inside) host 10.0.3.21
ldap-base-dn ou=MyDomain,dc=MyDomainnet,dc=local
ldap-group-base-dn ou=MyDomain,dc=MyDomainnet,dc=local
ldap-scope subtree
ldap-naming-attribute sAMAccountName
ldap-login-password *****
ldap-login-dn cn=Cisco VPN,ou=Special User Accounts,ou=MyDomain,dc=MyDomainNET,dc=local
server-type microsoft
user-identity default-domain LOCAL
aaa authentication ssh console LOCAL
http server enable
http MyDomain_New_IP 255.255.192.0 inside
http redirect outside 80
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec ikev2 ipsec-proposal DES
protocol esp encryption des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal 3DES
protocol esp encryption 3des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES
protocol esp encryption aes
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES192
protocol esp encryption aes-192
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES256
protocol esp encryption aes-256
protocol esp integrity sha-1 md5
crypto ipsec security-association pmtu-aging infinite
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto ca trustpoint LOCAL-CA-SERVER
keypair LOCAL-CA-SERVER
no validation-usage
no accept-subordinates
no id-cert-issuer
crl configure
crypto ca trustpoint VPN
enrollment terminal
fqdn vpn.mydomain.com
subject-name CN=vpn.mydomain.com,OU=IT
keypair vpn.mydomain.com
crl configure
crypto ca trustpoint ASDM_TrustPoint1
enrollment terminal
crl configure
crypto ca trustpool policy
crypto ca server
shutdown
crypto ca certificate chain LOCAL-CA-SERVER
certificate ca 01
omitted
quit
crypto ca certificate chain VPN
certificate
omitted
quit
crypto ca certificate chain ASDM_TrustPoint1
certificate ca
omitted
quit
crypto ikev2 policy 1
encryption aes-256
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 10
encryption aes-192
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 20
encryption aes
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 30
encryption 3des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 40
encryption des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 enable outside client-services port 443
crypto ikev2 remote-access trustpoint VPN
telnet timeout 5
ssh MyDomain_New_IP 255.255.192.0 inside
ssh timeout 5
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
dynamic-filter updater-client enable
dynamic-filter use-database
dynamic-filter enable
ssl encryption rc4-sha1 aes128-sha1 aes256-sha1 3des-sha1 rc4-md5 des-sha1
ssl trust-point VPN outside
webvpn
enable outside
anyconnect-essentials
anyconnect image disk0:/anyconnect-macosx-i386-2.4.1012-k9.pkg 3
anyconnect image disk0:/anyconnect-linux-2.4.1012-k9.pkg 4
anyconnect image disk0:/anyconnect-win-3.1.01065-k9.pkg 5
anyconnect profiles MyDomain-employee disk0:/MyDomain-employee.xml
anyconnect enable
tunnel-group-list enable
group-policy DfltGrpPolicy attributes
dns-server value 10.0.3.21
vpn-tunnel-protocol ikev1 ikev2 l2tp-ipsec ssl-client
default-domain value MyDomain.com
group-policy MyDomain-Employee internal
group-policy MyDomain-Employee attributes
wins-server none
dns-server value 10.0.3.21
vpn-tunnel-protocol ssl-client
split-tunnel-policy tunnelspecified
split-tunnel-network-list value split-tunnel
default-domain value MyDomain.com
webvpn
anyconnect profiles value MyDomain-employee type user
username MyDomainadmin password omitted encrypted privilege 15
tunnel-group MyDomain-Employee type remote-access
tunnel-group MyDomain-Employee general-attributes
address-pool MyDomain-Employee-Pool
authentication-server-group LDAP_Group LOCAL
default-group-policy MyDomain-Employee
tunnel-group MyDomain-Employee webvpn-attributes
group-alias MyDomain-Employee enable
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:1c7e3d7ff324e4fd7567aa21a96a8b22
: end
asdm image disk0:/asdm-712.bin
asdm location MyDomain_New_IP 255.255.192.0 inside
asdm location MyDomain-Inside 255.255.255.255 inside
asdm location MyDomain-Old 255.255.254.0 inside
no asdm history enable
Maybe you are looking for
-
Read from xls file and put it in a table
Hi, I've an xls file while is having 8 cells with some thousands of rows. i've to write a procedure to read that file and put it in a table(each cell as each column). pls help me how to proceed. i'm using oracle 9i Regards Abdul Muthalef
-
Does anyone can tell me how to use ResultSet.getDate(String field, Calendar cal)method,, I have tried many way,,, but if I use this method, everytime throw a AbstractMethodError... thanks
-
How do I decide which PDF version for print?
Hi I'm almost finished this project and have another issue with printing. The colours aren't matching. I've used 'Kuler' for all my CYMK colours and for whatever reason, I can't nail the colours in my test runs and the client isn't happy. There ar
-
Checking the content of the file
Can somebody help me my problem is that I need to check whether a certain program places the comments correctly ex. /**/ this is the only comment that we are going to chek. I do have the program however it doesn,t work . Here is the code can somebodu
-
Hello, I want my web application uses a log4j.properties file located in a directory outside Tomcat, in /var/app/conf/. I'm using the PropertyConfigurator to configure log4j. If I put log4j.properties in the WEB-INF/classes directory all works fine,