Multiple WDS APs on a single IP range

I have 80+ APs on a single IP range. Can I have two WDS APs on a single IP range in order to service the 80+ APs? I was planning to configure 40 APs to point to one WDS AP and the other 40 to the other WDS AP

No, you cannot have 2 AP's acting as primary WDS servers on the same subnet. You can have 2 WDS servers on the same subnet, but the first will act as the primary and the second one would act as a failover. Together they would still only support 60 AP's.
You would have to either break the wireless network into 2 subnets, each with 40 AP's and 1 WDS server, or if you have a 6500 at the core you could purchase a WLSM which will support up to 300 Access Points per subnet.
I have had success with 2 wireless subnets, the only gotcha would be roaming from one network to the other. Roaming to a different subnet, your clients will have to obtain a new IP address which can take a little time. If you use your wireless network for internet and email, that should work fine. If you have mission critical applications, you may run into problems.

Similar Messages

Multiple bone animations in a single export

I was wondering how to attach multiple bone animations to a
single model, or if it is even possible.
Do I just need to have duplicates of the model, each with its
own animation?
Is there any way to specify a range of keyframes within a
single animation timeline?
It would be nicer if each animation could have its own name.
Is there a way to import a motion independent of a model?
These are all just different ways of asking the same
question, I know
Thanks for your help!

This is a multi-part message in MIME format.
------=_NextPart_000_005C_01C730C2.7EEBF4D0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
hi,
follow this steps
Create your character
apply animations as needed using the power of Softimage XSI
and the =
animation mixer if you want.
put the animations in secuence
example:
frames 1-25 standing
frames 26-50 walking
frames 51-60 attacking
and so on...
after exporting in Director use the range of motion needed in
your =
events.
whichModel.bonesPlayer.play("name", looped, startTime,
endTime, =
playRate, timeOffset)
REMEMBER that startTime and end time are in miliseconds so in
XSI you =
need to change your units in preferences to miliseconds also.
or you can code it in director to have passed fps to
miliseconds
Hope it helps,
Rafa
www.sintesys.net/exporter
------=_NextPart_000_005C_01C730C2.7EEBF4D0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0
Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1106"
name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY>
<DIV><FONT face=3DArial
size=3D2>hi,</FONT></DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>follow this
steps</FONT></DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Create your
character</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>apply animations
as needed using the =
power of=20
Softimage XSI and the animation mixer if you
want.</FONT></DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>put the
animations in =
secuence</FONT></DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial
size=3D2>example:</FONT></DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>frames 1-25
standing</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>frames 26-50
walking</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>frames 51-60
attacking</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>and so
on...</FONT></DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>after exporting
in Director use the =
range of motion=20
needed in your events.</FONT></DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial
size=3D2>whichModel.bonesPlayer.play("name", =
looped,=20
<STRONG>startTime</STRONG>,
<STRONG>endTime</STRONG>, playRate,=20
timeOffset)</FONT></DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>REMEMBER that
startTime and end time =
are in=20
miliseconds so in XSI you need to change your units in
preferences to=20
miliseconds also.</FONT></DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>or you can code
it in director to =
have passed =20
fps to miliseconds</FONT></DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Hope it
helps,</FONT></DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial
size=3D2>Rafa</FONT></DIV>
<DIV><A href=3D"
http://www.sintesys.net/exporter"><FONT
face=3DArial=20
size=3D2>www.sintesys.net/exporter</FONT></A></DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV></BODY></HTML>
------=_NextPart_000_005C_01C730C2.7EEBF4D0--

How to create the multiple spool requests for a single report.

Hi gurus,
I have one requirement to be completed , i need to send the out put of the report via mail in pdf format. for that what i did was, iam executing report in background and creating spool request and converting it to pdf and sending the file.
now the problem is, its a customer ledger report, for each customer i need to create a new spool request and send mail to that particular customer, now my dought is how to create multiple spool requests for a single pro and how i need to go about it.
And one more question is can we create a spool request for a report which is running in online.
waiting for inputs frm gurus.

Hello,
As per my knowledge for creating new spool id you will have to set
output_options-tdnewid = 'X'.
and then using
job_output_info-spoolids
create a pdf using
call function 'CONVERT_OTFSPOOLJOB_2_PDF'
Rachana.

Can you have multiple itunes accounts on a single computer? want to open a separate one for our daughter (but we will manage it).

just got our daughter a new iTouch, but want to try and keep hers separate from our iPhone stuff. can you have multiple iTunes accounts on a single computer?

This is all i know but all you can do is just creat a new one for them both and send all the stuff to the one think u can do that i hope it helps

How can I combine multiple icloud calendars into a single published calendar?

I have several calendars in Ical where I map my activities and schedules. Like many I need several calendars to categorise events.
Now, I'd like others to see when I'm free and when I'm unavailable. For this, I'd need to find a way to copy multiple Icloud calendars into a single one for publishing - and the published calendar would also have to sync to any update I make in the original calendar.
Any way to make this happen? Any third party app? Tried a couple - they were outdated and / or cumbersome.
If only there was a "smart calendar" tool in Ical …

It worked - up to the crucial point: after combining icloud calendars into one "on the machine" calendar, the latter is ready for going public. But of course - this public calendar will only contain the .ics files and will not sync for updates from the icloud calendars.
And that's what I want.
If this problem is not possible to solve with the software available in the Mac - is there any known third party solution for this?
(Apple: "smart calendars" please!)

With Pages 5.2 how can i use multiple language types in a single document

My Macbook Air Has the version 10.9.3
I'm used to work with the old version of Page.
But now I am using the new version of Pages 5.2 (1860).
I want to know with the new version how do I use an multiple language types in a single document option.
In the old version of Pages I was using Inspector -> Text -> "More" tab -> Language: British Inglese.
In the new Pages 5.2 I do not know how to do it
Could you help me?
melo

It's not possible to tag text with multiple languages in Pages 5. Go back to Pages 4, which should still be in you iWork folder.
For the whole doc in Pages 5, use Edit > Spellling and Grammar > Show Spelling and Grammar.

How Can I Use Multiple Weblogic Instances in a Single OS

Hello Everyone,
Actually I have to install Some different applications. Few of them need weblogic 10.3.6 and others need 10.3.4. The OS am using is Oracle Enterprise Linux 5.
Now I am able to install 2 separate(One of 10.3.4 and 10.3.6) instances with two different users,In two different directories.
I have installed the weblogic 10.3.6 version with a user webadmin and installed node manager with port 5556. This is working fine.
The main problem here is :
In the second instance (10.3.4 ) installed with a a different user and gave the port number to NodeManager as 1600 and its not getting started. Its throwing error and also after some errors in the terminal am able to see that its reverting to port number 5556 only.
What might be the issue?
I have to install 2 different versions of weblogic in a single Server. But am failing with NodeManager. What Can I do to have multiple weblogic instances with multiple versions in a single server ?
Can anyone suggest a resolution for this please ?
Thanks in advance.

Pl do not spam these forums with multiple posts - How Can I Use Multiple Weblogic Instances in a Single OS

How can I allow multiple users to edit a single shared iCal calendar?

Is it possible to allow multiple users to edit a single shared iCal calendar? I also want to provide different permissions to those users. Is this possible through .MAC? Is it possible on Mac OSX Server?

I would like 2 agenda synced through .Mac but it does not work.
I have 2 computers and 2 laptops. A very simple agenda with 3 calenders. Myself my partner and the office calender. I want to publish my calender and that of my partner. The office calender I would like to sync so that we can change the office calender at any location.
I set up sync only for iCall and have a .Mac account. When I change anything on any of the calenders in iCall nothing happens on any of my other locations. Even though the locations are registered as synced. I can see the sync wheel turning but at the end of it the calenders are not synced.
At this moment I fully understand the publish and unpublished calenders but have no clue what so ever what syncing does for iCall. There seems to be no functionality to it. It does not transport any calender info over .Mac. There is no visable check to see what is happening and the process of syncing is not transperent. Lots of my friends go to me for advise on Apple issues but as far as sync wether iCall or Addressbook I always tell them sync does not work and I have no clue why others have it working. I haven't met any people here in Holland either that got in working. I suppose with iCall you have to get third party software to share calenders editable calenders. Really hopeless situation, wish Apple would just have a manual stating what sync can do and what it can not. Hours wasted on this issue trying to get it to work.
Hope anyone here can help out.

Can you combine multiple itunes accounts into a single one?

I set up separate itunes accounts for my (2) sons (8 & 10) because one had an iPod and the other had an iTouch.
They just got an iPad for X-mas (that they'll share) ... I want to set up the iCloud and create a "joint" account.
Is it possible to combine their multiple itunes acounts into a single account?

This is all i know but all you can do is just creat a new one for them both and send all the stuff to the one think u can do that i hope it helps

Is it possible to set up multiple iTunes accounts on a single computer?

is it possible to set up multiple iTunes accounts on a single computer?

If you do it with a single user account, you will receive update notifications for purchase made on both IDs regardless of which one you're using at the time. That's slightly frustrating as you get the notification BUT you can't actually update! In any event, separate user accounts on the computer is the cleaner way to go.

How to provision multiple AD Accounts to a single User Profile in OIM

Hi,
We are using OIM 11g R2. We have implemented AD Provisioning/Reconciliation using Active Directory 11g Connector.
The correlation rule for linking AD accounts with OIM during target recon is set as “Email ID”
We have some business requirement where we want to provision multiple AD Accounts to a single User Profile in OIM.
Issue we are facing:
Suppose we have USERID1 in OIM which has email id as USERID1@ XYZ.COM .
After that we have provisioned sAMAccountName=USERID1 (Email ID as USERID1@ XYZ.COM )& sAMAccountName=USERID2 (Email ID as [email protected]) to the user User Login = USERID1 in OIM.
Both the AD User accounts can be seen as provisioned.
After we run the AD Target Recon, the target recon is failing because of “Multiple Process Matches Found” issue.
Question here is:
Is it possible to maintain/manage multiple AD Accounts (Same AD is used for all the multiple AD Accounts) to a single OIM profile user ?
Regards,
J

Hi,
We have seen its working and linking multiple accounts when we have Key field as "User ID" in the Process Defn & RO and the recon matching rule has email ID as the matching rule.
Please suggest, if we are having the above kind of rule/config...will it not cause any issue?
Regards,
J

Multiple post requests using a single HttpConnection

Hi,
is it possible to send multiple post requests using a single Http connection.
i am currently trying to simulate the preformance overhead because of creating HttpURLConnection to talk to my servlet. But, that made me wonder, if is there a way to send multiple post requests using a single HttpURLConnection.
can anyone help me with this.
thanks in advance

Hi
I found this article through Google. I hope it helps a little
http://www.developer.com/tech/article.php/761521
D

Multiple file links in a single page: A better way to/efficient way to handle ?

Aloha Everyone!
I would like to ask the community how they have handled multiple file links in a single page. Sort of a pseudo database of files.
Here is the webpage I have been working on:http://huichawaii.org/
Here is what I have done to show files so far:
old version:http://huichawaii.org/proceedings---2012-education%2c-math---engineering-technology.html
new version: http://huichawaii.org/ahs2013-proceedings.html
The website works best in Chrom or Firefox, still have to convert the flash header to an edge animate .
Mahalo in advance for everyone's input!

Depending on what other text you might have, you could use the data list component.
To get the text to have underlines, you will need to edit the repeated item. You can also adjust colors and fonts as well. The default rollover and selected states will probably not be the UI that want, so make sure you change those as well.
Now for the interactivity, select the datalist, and use the interactions panel, choose "On Select", then "Go To Url", the trick is to make sure the "When a specific item is selected" is also set. Here are the basic settings to get your links working:
Add new interactions for each item you want to be functional.

Multiple DataBase Connection in a Single Form

hi all
Is it Possible to have Multiple Database Connection With a Single Form
Block a : Retriving data from a database Service a/Schema A.
Block b : Retriving data from a Remote Database Service b / Schema B.
If yes how to do this.
regards
jai
email:[email protected]

Sure you can access a database this way,
but can you base a block on this database connect? No you can't.
Frank

How do I bind multiple PDF Documents into one single document?

I am trying to bind multiple PDF documents into one single document can anyone please help me?

You would need Adobe Acrobat to do that. Reader doesn't have the ability.

Multiple WDS APs on a single IP range

Similar Messages

Maybe you are looking for