Multiple web content animations in one article

Hi
I have three animations, that works perfect when placed in seperate articles.
Problem is, when I try to collect them in one article it crashes.
Each animation is set up to loop until you touch the screen, the things happens.
But when swiping to next screen in the article, the first animation is still looping, when in seperate articles no problem
Anyone have an idea
Best regards
To all of you helpful people in here

You can do this in a few ways (as with most things in Flash). You can put them in the timeline sequentially as you said. Not sure why that's not working for you. Maybe you can elaborate?
Or you can export each as a SWF with the publish command, then import those swfs into a new fla and put them in the timeline sequentially.
Or you can have a FLA that plays one and then loads the other as an external swf. Or just load them both, one after the other. Loading etxrenal swfs is discussed here: http://forums.adobe.com/thread/897397?tstart=0

Similar Messages

  • Link from Web Content overlay to another article

    Thinking caps on, guys. I am trying to reduce the overall size of a folio that contains a pop-out panel (a two-state MSO) that reveals image thumbnails in a vertical scrolling content frame. Each thumbnail is a button that takes the user to another article in the folio. The panel is repeated across all articles, which is handy for the user but wasteful in file size.
    In theory, I ought to be able to reduce the file size of the pages containing these panels if I was to replace the vertical scrolling content frame with a tall Web Content frame that would point to an appropriately designed HTML doc in HTMLResources.zip. This would minimise repetition of all those thumbnails.
    The problem, if you haven't already guessed it, is that DPS does not allow you to link from a Web Content overlay to folio articles. The 'navto://' convention simply won't work in this scenario.
    Is there ANY way to jump a Web Content frame to other locations in the folio? A non-standard, non-supported workaround would do me just fine.
    Thanks for reading this far.
    Ali

    Ali - Check out the new "Linking" article in the Advanced Overlays issue of DPS Tips. It explains how to use an unsupported method for cross-folio linking. I explained how to create buttons with this format, but the same format would work using <a href="URL"> in HTML.
    Johannes also breaks down this method here:
    http://digitalpublishing.tumblr.com/post/26564811021/cross-publication-linking-bonus-qr-co des

  • Indesign CS5.5 Web Content Animation Cutoff

    Hi,
    I'm currently working in Indesign CS5.5 and I'm trying to add Web Content to a folio that I'm making. It's for an animation on the cover.
    I get all the way to testing it on the Content Viewer on my iPad and when I open it up, it gives a little loading circle for half the animation.
    Does anybody know how to get rid or cut back the loading time so my full animation is visible? There's no loading circles on Wired's magazine whenever they have these types of animations.
    Thanks,
    Rob

    I've got it working.
    Perhaps the problem was the numbered list used in the Chapter Title paragraph style? I had said to convert numbered lists to text in the ePub Export dialog.
    Some combination of these steps solved the problem in case others encounter the same thing:
    a) Changed the chapter headings using the Chapter Title paragraph style to Chapter Title FM. This style does not used a numbered list. Of course, I had to manually type "Chapter 1" - before each chapter title.
    b) Once all occurences of the Chapter Title paragraph style were gone, I redefined the TOC definition to remove Chapter Title. This leaves me with a single Level 1 and a single Level 2.
    c) Updated the TOC with the new definition.
    d) Moved the TOC frame from the pasteboard to some blank space in the front matter. I did not bother to make the frame large enough for all the text, since InDesign will delete this upon export.
    e) Export to PDF. On the third panel, changed the "break at: Chapter Title" to "break at: Chapter Title FM"
    My theory is getting rid of the numbered list in the chapter paragraph styles probably solved the problem. Thanks to all who took the time to check out the discussion.
    Bill

  • Multiple web content overlays on a page

    I'm using Edge to make some vector animations--3 separate infographics--in my DPS publication. I'm placing them all on one single page, but only the first animation that is tapped by the user "plays" all the way through like it should. That is, once I tap and successfully play one animation, I try a second animation, but it loads but doesn't play.
    Is there some limitation on the number of web overlays--or HTML5 animations--that can be on a page?
    For background on my workflow, my organization doesn't yet have a DPS subscription. We are simply building folios with CS6 and testing with our accounts on the iPad with the newest Viewer (23).
    thanks,
    Scott

    We are having the same problem here. It's seems to be related with the iOS 6 update. We have two iPads, one with the updated software (iOS 6) and the other without it (iOS 5). Both of these have been updated with the new Adobe Content Viewer. The one with the old iOS works perfectly (HTML, Edge Animation, Videos) but the other with the most-up-to-date software does not. The HTML doesn't play and some times plays it once. We even tried by adding it to the HTMLResource folder to be trigger by a button to open a new window by itself, but no joy. Again we don’t have any of these problems on the iPad without the current software update. They all work perfectly
    Please advise since most users have upgraded their iPads and iPhones.
    Thanks,
    Daniel Rodriguez

  • Move multiple Web dynpro projects to one DC

    Hi all,
    I have got around twenty local web dynpro projects. Now i want to move them to a DC. I have created the domain,track,imported the Development Configuration and created the DC. Now i want to move the local projects which are there in the NWDS to the new DC. I could move one project. But how can i move multiple projects??
    regards
    Shyam.

    Hi,
    well though I would not recommend to move 20 projects into a single Dc you can still do it. Just create the DC and then goto the file navigator and copy everything from the src/packages folder from the local WD project to the src/package of the DC project. After that you should do a Reload on the DC project.
    rgds
    David

  • Is Spotlights ability to search web content limited to one word searches?

    I have my website setup and Spotlight enabled.
    I have several thousand pdf documents indexed and would like to be able to search them by "Content" "Contains or equals".
    The problem is, that when I search using 2 words that I know are contained in several documents, the results returned are 0, yet searching with 1 word yields plenty of results, I really need to be able to narrow my results down by being able to search for more than 1 word at a time.
    Thanks for your help.

    This is normal, because some environments have servers with names like intranet. When your DNS returns a plain 404, Firefox then sends the word to your preferred search engine. But if the DNS service sends back its own results page, that preempts the normal behavior.
    Perhaps there is an add-on to work around this? I do not recall seeing one, but you can search here: https://addons.mozilla.org/en-US/firefox/
    For many years the address bar search was called the keyword service, so in addition to other queries, you might search for add-ons related to keywords.

  • Web Content Overlay - iFrame Width Issue

    I'm adding a web content overlay in one of my articles. I've created and hosted a webpage that contains an iFrame of a Google Form.
    When I select my text frame in the article, apply the Web Content Overlay option, add the URL, and load/test the folio on my iPad, the iFrame width I set in my html file isn't taking effect. The web overlay isn't displaying (and wrapping the text and form) according to the width that I specified in the html file. Testing the html file in different browsers on my desktop shows a change in width, but not so on the web content overlay frame in my article. Vertical scrolling is working just fine but I'd like to have a narrower width for the form so that a user only scrolls vertically; instead of having to scroll left/right to read more information on the form.
    I've tried editing the iFrame width in the code: inside the iframe element, adding a div wrapper, defining a table width... No adjustments in the html seem to be rendering correctly on iPad.
    And I'm not a huge fan of the Web Content Overlay's option of Adjusting content to fit the frame since it makes the form very small.
    I'm running on CS5.5; I haven't tested the direct embed into
    Any help is greatly appreciated!

    Try to paste the code directly into InDesign. Sometimes it creates better results than just using a web overlay. I'm also dealing with some similar problem trying to get SoundCloud into the document.

  • Multiple HTML5 Content on One Page Issue...

    I have created a couple really basic animated graphs for a DPS article in Adobe Edge Animate but am having issues with them once they are previewed or pushed to the cloud.  Both graphs are created and published exactly the same way from Edge and placed in the InDesign document the exact same way.  Both are published with web settings and the frame that I am creating is set as a web object and pointed towards the appropriate folder and .html file.
    If either is added and previewed individually, both work just fine.  However, if both are placed on the same page, only one will work properly.  To more specific, both will load their backgrounds but neither only ones animated feature (a line graph and a bar graph) will work.  It varies which one will load and work properly so trouble shooting has been difficult.
    Has anyone run into this issue and/or no a way to solve it?
    Thanks.

    That is what I was doing.  Both frames are set as web content overlays and link back to their separate folders & respective index.html files. 
    If I turn off auto play I can tap on both and get them to work individually.  i.e. if I tap graph 1, it works but then tapping graph 2 does nothing.  If I reload the page and try the opposite, graph 2 tapped first, it loads but now graph 1 does not.
    I attempted to load them as .oam packages however I can't place them in InDesign 5.5.  Is there a known issue with that as well?
    Thanks again.

  • Can't interact with Web Content Overlay when article is zoomed in

    I have a problem with Web Content Overlay. It's working (interacting) only when article is viewed in 1:1 scale. Articles are added as PDF's, and when i do pinch zoom on them - Web Content Overlay stops reacting on click events.
    Is it a general WCO limitation?
    Can article with Web Content Overlay be zoomed in and still give user the ability to play with HTML content?
    Piotr

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

  • InDesign Crashes when uploading an article with Web Content Overlay - have checked forums

    I'm making a folio for my design portfolio in InDesign CC
    I currently have one article uploaded, when I try to add my next article InDesign crashes.
    I have previously uploaded the article without the single web content overlay and it uploads fine.
    The status bar gets stuck at the end 'Building folio ... Processing overlays...'
    The content is a simple web form and is only on page 6/6 - not sure why it's freezing by adding a small page on the end.

    I've just tried uploading a single page article with the Web Content overlay and it's crashed again.
    Not sure if that means it's the web content?

  • One IDP and multiple web applications

    Continuing to look at the configuration necessary to enable SAML on my 2013 farm, I have two web apps which i would like to have SAML running on, both leveraging the same 3rd party IDP for authentication. As I dug into the various stages of configuration
    there is a part that establishes the SharePoint site realm identifier...researching what this is for, i found an article by Steve Peschka (http://blogs.technet.com/b/speschka/archive/2010/04/27/how-to-create-multiple-claims-auth-web-apps-in-a-single-sharepoint-2010-farm.aspx)
    in it he talks about if you have one IDP but multiple web apps that must use that IDP.
    Am i correct in understanding that when steve mentioned "You can only associate a token-signing certificate from an STS with one SPTrustedIdentityTokenIssuer." That the TS cert I import from my IDP is unique and is only able to be linked to one
    Web Application...unless i create a URI that makes Sharepoint aware of the additional web app?
    Going further...I can't just import another copy of the TS cert and set it to another name unique from the first one?, once this is done i could then create a new unique realm for that additional web app with that other cert. Then when configuring the web
    apps it would list two IDP's for me to choose from and i would assign them individually to on or the other.
    His article covered 2010 not sure how 2013 works with this stuff...new territory for me here so forgive my lack of knowledge on how this all comes together.
    Also, is there some sort of configuration necessary for Office web apps farm to work with SAML or is that handled through S2S communication and is beyond SAML?

    Right, so your IDP will have a single certificate which will be single-instanced on the SharePoint farm. Steve's article is accurate for SharePoint 2013 and I've used this method with ADFS. It should be no different, on the SharePoint side, with other IDPs.
    WAC is beyond SAML. The S2S/JWTs take care of it.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • URLs to specific articles in Web Content Viewer

    I'm placing the Web Content Viewer on a custom site for free viewing of all articles in the folio. Is it possible to get a URL of individual articles that be links sent to people? So if there is an email blast, can  there be a URL that will lead a reader to a certain article in that online folio? Thanks.

    Is this the reason (under "Known issues with social sharing / web viewer)? Digital Publishing Suite Help | DPS Bug Fix Release Notes
    I'm not using V32 on this folio.

  • Multiple Web Services in one Jdeveloper project

    Hi all,
    I'm currently trying to implement a series of web services, all relating to one application. I'm using the top-down approach, where I generate the web service from a WSDL file, and add my implementation to the generated classes. The WSDL file imports all sorts of XML Schemas (xsd-files) and Jdeveloper correctly generates all the necessary java-classes for me. Lets call the first web service I create WS-1.
    This all works fine and I'm a happy panda. I can call the web service, it works, I can modif the wsdl and regenerate the web service to e.g. change the input etc. All this works.
    Just until the point where I want to create a second web service (lets call this WS-2). This new web service doesn't use all the XML Schemas that the first web service does, it is more simple with regards to in-/output. The problem arises when I modify WS-2 and Jdeveloper regenerates the Web service files (.java and the files in the WEB-INF/wsdl-directory). When I do this, it deletes the imported xsd-files that WS-1 uses (removes them from WEB-INF/wsdl).
    And when I regenerate WS-1 to get my xsd-files in again, then when I regenerate WS-2 it imports all the unnecessary xsd-files into the wsdl for WS-2.
    Something tells me, that there is a connection or shared library between all web services in one Jdeveloper project. That they all imports and uses the xsd-files in WEB-INF/wsdl.
    Is this true? Can't I have multiple web services (and wsdl-files) using different types (schema definitions) in the the same Jdeveloper project?
    One solution I can think of, is to have all my web services in different projects under the same application. But is this really necessary?
    I'm using Jdeveloper 10.1.3.3.0.

    Hi,
    pure from a coder instinct I think I would prefer them to be in separate projects for better reuse and clean separation. If I need project 1 to access aclass from Project 2, I can check the dependency check box in the project properties. Is there any business requirement that makes you think having all of these in a single project will help ?
    Frank
    Btw.: I agree that JDeveloper shouldn't constraint developers from doing what they want and if this is a limitation the feel free to file a bug

  • Pros & Cons of having multiple web applications under one EAR project

    Could anybody let me know what are the advantages and disadvantages of having multiple web applications under one single EAR project?

    Either this is homework, in which case, do it yourself, or you already think you have some pros for doing this. Share with us

  • Multiple Web Connectors in one machine

    We are running iAS and iWS in the same machine in NT. When I have installed
    the WebConnector for another web instance. kxs crashed and iAS is not able
    to start anymore.
    Can we put multiple web instances accessing the same iAS in one single
    machine?
    Thx.
    - Rebecca

    You can do this on Solaris, but not NT. Multiple webconnectors (and iAS
    instances) are only supported on UNIX.
    It surprises me you got a KXS crash. (In fact, it might be theoretically
    possible to get working, but I wouldn't recommend it.)
    David
    Rebecca wrote:
    We are running iAS and iWS in the same machine in NT. When I have installed
    the WebConnector for another web instance. kxs crashed and iAS is not able
    to start anymore.
    Can we put multiple web instances accessing the same iAS in one single
    machine?
    Thx.
    - Rebecca

Maybe you are looking for