Multiple webdynpro applications for single webdynnpro component

I am working on a object which have multiple webdynpro applications for single webdynnpro component.How to assign a different functionality to each application bcoz when we right click on webdynnpro component and select create webdynpro applications ,it just creates a application how so we assign diff functionality to each of them .Also in the parameter tab of the webdynpro applications ,there is a diff config id mentioned for each application.what is its relavance .
Rgds,
Praveen

Hi Saravanan,
I need to modify it from the portal end, not at the application level.
I need some configuration steps which specifies how to modify the Detail Navigation in PPM. Using SPRO we can do some configuration, i wanted to know whether its possible from portal end as well.
Regards
Shivas Bhan

Similar Messages

Multiple WD Applications for same WD component

Hello All,
How can we generate multiple web dynpro applications for the same Web Dynpro Component?
I think one way out was to specify different interface view name for each application. But in one of the applications, I can see that 2 different applications have same interface view but have generated different URL's and have different parameters.
Kindly help me out with this issue.

Hi Abhishek,
The functionality of a single Web Dynpro component can be accessed by defining multiple applications, each addressing a different interface view and/or a different inbound plug of the interface view. In order to define a Web Dynpro application, you must specify:
1) The component to be invoked
2) Which interface view of the root component will be used
3) Which inbound plug will act as the entry point for the nominated interface view (this inbound plug must be of type Startup)
Regards,
Uday

Use of multiple Applications for single webdynpro component in ABAP WEB DYNPRO

I am working on a object which have multiple webdynpro applications for single webdynnpro component.How to assign a different functionality to each application bcoz when we right click on webdynnpro component and select create webdynpro applications ,it just creates a application how so we assign diff functionality to each of them .Also in the parameter tab of the webdynpro applications ,there is a diff config id mentioned for each application.what is its relavance

Hi Sam,
Different functionalities for a single webdynpro component can be achieved by many ways. Among them is the use of multiple applications. Say for example if you want different views/windows to be displayed at the start up, you can achieve it by specifying at the default window, for each every webdynpro application.
And if you want control the fields, say for example you want to display input fields as editable for one application and read only for other application, you can achieve it through application parameters. Based on parameters, in HANDLEDEFAULT method of window controller , you can specify the type of behaviour , whether it has to editable or not based on parameters and same can be used at context binding of UI properties.
Application configuration can be used for personalization.Web Dynpro ABAP Application Configuration. This tutorial would help you understanding the concept much better. There can be multiple application configurations for a single application.
Regards,
Harsha

WebDynpro application for Blackberry - TextView problem??

Hello:
I am developing a WebDynpro application for Blackberry, which I show a TextView, but happens that the text leaves together all and the jumps of Line are not applied (\ n), as I can solve this?

Thanks, but it does not work very well the idea is to show a text that can be seen of ordered form but I have not been able, the IFrame give Error, etc. me. he is something simple that not yet I can solve.
in WebDynpro it is seen thus, in the TextEdit.
Datos de Sociedad
LACL Lan Airlines S.A.
Datos de Proveedor
169 EXEQUIEL VICENTE VASQUEZ MORALES
Información de Compras
Monto Total:               2.000 CLP
Solicitante: CYANEZM CLAUDIA ANDREA YAÑEZ MUÑOZ
Fecha Contabilización: 27.03.2007
Imputación
IMPUTACION DISTRIBUIDA
Notas para Liberador
Aprobadores
GONZALO IGLESIAS No Liberado
Detalle Compra
Descripción          Cantidad UM   Precio Bruto Por
ALIMENTACIÓNDESAYUNO..........         1 UN             1.000         1
     % ALIMENTACION ..........         1 UN             1.000         1
in BlackBerry it is seen thus, in the TextEdit.
Datos de Sociedad          LACL Lan Airlines S.A.
Datos de Proveedor           169 EXEQUIEL VICENTE VASQUEZ MORALES
Información de Compras          Monto Total:               2.000 CLP          Solicitante: CYANEZM CLAUDIA ANDREA YAÑEZ MUÑOZ          Fecha Contabilización: 27.03.2007          Imputación          IMPUTACION DISTRIBUIDA          Notas para Liberador          Aprobadores          GONZALO IGLESIAS No Liberado          Detalle Compra          Descripción          Cantidad UM   Precio Bruto Por          ALIMENTACIÓNDESAYUNO..........         1 UN             1.000         1               % ALIMENTACION ..........         1 UN             1.000         1
this it is my problem ...

Multiple contact persons for single vendor--LSMW

Hi experts,
i want to upload multiple contact persons for single vendor. using lsmw direct input method or recording method is it possible..if possible can u let me know the procedure.
Thx in advance,
Neelu

Hi
in our company v wil upload contact person details in Sales Data......
so its not possible to upload more than one contact person for vendor....
can u tell me wr u people wil enter the contact person details?
Regards
Smitha

Multiple storage locations for single material - ECC 6.0

Hi
Can anyone let me know, how one can map multiple storage loctions for single material?
regards
Sanjay

hello,
Go to SPRO --> IMG --> Materials Management --> Inventory Management and Physical Inventory --> Plant Parameters.
Tick Create storage locations automatically. System will extend the material to the storage location maintained in the transaction.
Nikhil

WebDynpro Application for Create Sales Order

Hi All,
Can any one help me to get the right documentation on How to create a WebDynpro Application for Create Sales Order, Calling BAPI.

In NWDS, click Help-->Welcome...Netweaver Developer Studio. Under "Developing WebDynpro Applications" click the link to the chapter.
Go to....
SAP WebAS for Java Applications
Development Manual
Developing Web Application
Web Dynpro
Tutorials
Advanced Tutorials
Model Tutorials
Creating a Web Dynpro Appliation Accessing ABAP Functions.
This should get you started.
Regards,
Rich Heilman

Multiple HTTP requests using single HTTPService component

Hi,
I am having one requirement, I need to use a single HTTPService component to send request to a same and single ASP.net multiple times.
How can I acheive that..? I know that I can acheive this by sending one request at a time and after the "result" event is called for the first request then sending the second request and so on...
But if I do so then it will be delayed response as I need to wait until the result handler for the previous request is called...
So how do I do this..?
Any help greatly appreciated....:)
Thanks in advance..
Thanks,
Bhasker Chari

yep, the setting works when set to 10. Seemed to not work when set to 20. Anyways, summary is "long polling" and Flex
or Flash are not good compatriates. So, you will need to work out your own mechanism on the server or client
side to limit the sockets used/wasted. Painful but true.
<?xml version="1.0" encoding="utf-8"?>
<mx:Application
xmlns:mx="http://www.adobe.com/2006/mxml">
<mx:Script>
<![CDATA[
import com.util.HTTPServiceProxy;
import mx.rpc.events.FaultEvent;
import mx.rpc.events.ResultEvent;
import mx.rpc.http.HTTPService;
private var urlOpenTasksDefault:String = HTTPServiceProxy.servercontext + "/blahblah?something=somethign";
private var waitRequestPart:String = "&wait=5000&lastUpdate=" // long polling period for now for testing
private var iResponses:int;
private function runTest(urlString:String):void{
var service:HTTPService = new HTTPService();service.url= urlString;
service.resultFormat =
"e4x";service.method =
"get";service.contentType=
"application/xml";service.addEventListener(
"result", httpResult);service.addEventListener(
"fault", httpFault);service.send();
public function httpResult(event:ResultEvent):void {
trace("httpResult " + iResponses++ );}
public function httpFault(event:FaultEvent):void {
trace("httpFault " + (iResponses++) + event.fault.faultString);}
private function test1(evt:Event):void {iResponses=0;
var reqs:int = parseInt(requests.text);
for( var i:int=0; i<reqs; i++ ){runTest(urlOpenTasksDefault);
private function test2(evt:Event):void {iResponses=0;
var reqs:int = parseInt(requests.text);
for( var i:int=0; i<reqs; i++ ){runTest(urlOpenTasksDefault+waitRequestPart+
"0");}
]]>
</mx:Script>
<mx:Label text="Requests"/>
<mx:TextInput id="requests"/>
<mx:Button label="Test Requests-Responses" click="test1(event)"/>
<mx:Button label="Test Long Polling" click="test2(event)"/></mx:Application>

How to enable a partner application for Single Sign-On?

Can someone please advise me on how to enable my existing J2EE web application for the Oracle Single Sign-On?
My requirement is i want to provide the single sign-on authentication service to my J2EE web application. For this, I would like to make my application as a partner application similar like the OracleAS Portal.
I am using Oracle 10g ( OralceAS, Oracle Infra, OID ...)
I found the following service/APIs which Oracle provides. I am not sure which one is suitable for me.
1. mod_osso ( Static)
--- In this case, I have to make a entry in mod_osso.config file to protect the URL. should I have to register the URL again through single sign on admin page ("Administer Partner Application") after make a entry in config file?
2. mod_osso ( Dynamic directive)
-- in this case, I have to modify the code by providing the directives like 401, 499.. etc. So i don't prefer this as i don't want to touch my app.
--If I go with this option, should i have to register the URL with Single sign on server through SSO admin page ( as mentioned in the above step#1) ?
3. SSO SDK
- Since it was deprecated and need java coding, i am prefer this option.
-- however, if i go with this option, i will develop code by using SDK. in this case i need to register the URL in SSO server through admin page.. am i right?
Note:- OSSO server integrated with Active Directory for the authentication.
Thanks,
-Senthil

sharon38_74 wrote:
they said that our internal application needs to send a "login request" to etran via SSL with the user's information encoded in base 64 format. etran captures the HTTP header containing user authentication and authorization information, and parses the required information from the HTTP header.
My question is that how I set user information in HTTP header? From my understanding, once I am able to set the user information in HTTP header, it is in base 64 format?Your application need to act like a proxy. You can invoke a HTTP request programmatically using java.net.URLConnection. You can set request headers using URLConnection#setRequestProperty(). Also see the API docs: [http://java.sun.com/javase/6/docs/api/java/net/URLConnection.html]. You only need to know the header field name where to set the Base64-encoded value in. You need to Base64-encode the value yourself.

WebDynpro Application for WinMobile 6.5

Hi Experts,
Can anybody tell if there is an official SAP statement that WebDynpro supports or not Windows Mobile 6.5 devices? I can not find anything about that in the PAM.
WebDynpro supports the URL Parameter sap-wd-client=PieClient to render WebDynpro applications on mobile Devices (Pocket Internet Explorer in our case). Our application works fine on a 5.5/6.0/6.1 device but with view bugs on a 6.5 device (seems that using ParameterMapping on IWDButton and IWDLinkToAction is ignored).
Regards
Michael

Hello Michael,
Windows Mobile 6.5 device has to be certified and for this the customer vendors should contact SAP to get it certified.
So, new devices that come out with 6.1 and later versions shall be supported by SAP, provided the devices are certified. Certification will be on a "device-level".
So, all you have to do is to ask your device vendor to get the devices certified with SAP.
So, if a device vendor wants to get a device certified - then they can approach SAP. We shall do the testing and then certify that the device can run SAP NetWeaver Mobile client. So, it does not matter if the device OS is 6.0 or 6.1 or later. We shall certify the device, and then customers can run the application on the certified mobile device.
I hope this helps you.
Regards,
Blanca

Multiple email addresses for single characteristics in Email Bursting

Hello Experts,
We have requirement of Bursting email to external sales representative with only their relevent data.
We have used Bex Broadcaster with email Bursting as distribution type . But the problem is we have to send out
email to multiple sales reps for a particular sales rep i.e for a particular Sales rep we have to maintain multiple
email ids of sales rep and infoObj can have only 60 chars long. So I cannot put more than one email id.
Is there any work around to overcome this difficulty.
Also I could have use individula schedule but number of schedleis very high around 200.
Thanks,

I understand you issue and I dont think It can be solved in BW as they system is not expecting the users email address to be more that 60 chars, however you could create a rule in outlook (or whatever mail application you use) to forward all emails containing this header to the other email addresses. Thats my only idea

How to use multiple tape drive for single filesystem on single client.

Hello All.
I want to backup single filesystem with multiple tape drive.
Incase of Symantec veritas netbackup "NEW_STREAM" for multi-stream backup.
Backup client has a single backup filesystem like /data1 directory with 4 LTO6 drives.
/data1 directory doesn't have a sub-direcotry, just present a files.
If /data1 directory has a sub-directory like /data1/aaa, /data1/bbb, /data1/ccc , Is it possible to use multiple drives?
Please anybody answer the questions.
Thanks advanced.

See how to use multiple tape drive from single client when I want to backup single filesystem?

Multiple Excise Invoice for Single GRPO

Hello All
How do we create multiple excise invoices from a single GRPO document.
Thanks
Santhosh.K

Hi
As per the scenario you mentioned.
You can't create multiple Excise Invoice against Single GRPO. And as per the law of excise also there is no way to do like this.
Gate Pass made against delivery when some vendor send the item to the client. Time quantity and rate with the duties are mentioned in that.
similarly when client received the material all the above should be there in the gate pass.
Ashish Gupte

Is it possible to install multiple AIR applications from single install?

I've been asked to find a way to install multiple air applications in one install. Is this possible, or am I going to have to use a 3rd party tool like InstallShield?

I guess it's possible to create a meta-installer, which fires up the individual installers using the command line. It's not the ideal way to do this, but it might work.
Sample code to use the command line from within Flex:
<fx:Script>
if(NativeProcess.isSupported)
    var file:File = File.desktopDirectory;
    file = file.resolvePath("secondAirProgram.air");
    var nativeProcessStartupInfo:NativeProcessStartupInfo = new NativeProcessStartupInfo();
    nativeProcessStartupInfo.executable = file;
    var process:NativeProcess = new NativeProcess();
    process.start(nativeProcessStartupInfo);
</fx:Script>

Multiple Work Center for single internal activity ?

If more than one work center used for single internal activity how can work center be allocated ?

Hi Yogesh,
I understand that, you have a project activity in which different groups of people are working and you want to plan costs for all these groups of employees under the same project activity.
To achieve this, create different activity elements under that activity and assign specific WCs and Work duration to all these activity elements so that system will calculate aggregated costs and scheduling dates accordingly.
Hope this helps

Multiple webdynpro applications for single webdynnpro component

Similar Messages

Maybe you are looking for