Multiple wifi configuration

Hi, i need help.
With my MacBookPro i connect to many wifi network everyone with different tcpip configuration. I'm looking for a way to manage these different configurations avoiding to reconfigure each time the one i'm using.
I tried by System preference-Network and selecting AirPort. In the Preferred Network i find all my wifi network, but the configurazion tcpip is always the last one i used;so every time i connect to a different one a have to change the parameters.
I have read in some magazine that there is also a free mac utility to manage this, but i don't remember the name.
Can someone can help me?
Thanks a lot

Nice thing is, if you leave Location set to Automatic, you won't even have to switch between them manually. Whichever of your location networks is found will be joined automatically. At one point I was moving between three different wifi networks, and never had to choose... I'd just open up my laptop and it would be on the network.

Similar Messages

Does apple allows to install multiple wifi configuration profile installation in a single device ?

Let know that whether there is an option to install Wi-Fi configuration profiles containing configuration for different SSID's in a single device so that I need not to install a new FileName.mobileconfig file via iPhone Configuration Utility everytime for different SSID's.

My question is does the reduction of throughput of Wifi occurs from the Extended Wi-Fi base station only, or it affects the primary base station as well?
The bandwidth loss would be for the "entire" extended wireless network, not just from the extending base station. To improve the overall bandwidth of the extended network, placement of each base station is an important factor.
I'm wondering would the thorughput be the same if I connect wired or the connection will be worse than 1.5MB/s thereabouts if I bridge wirelessly.
Bandwidth performance-wise, going from best-to-worst: 1) wired-to-wired, 2) wired-to-wireless, 3) wireless-to-wireless (extended network,) & finally 4) wireless-to-wired (aka, wireless Ethernet bridge).

How to create multiple pof configuration files for c# client

Is there a way to have multiple pof files for c# coherence client?
Can I create a file called my-pof-config.xml with the following line...
<pof-config xmlns="http://schemas.tangosol.com/pof">
<user-type-list>
<include>assembly://Coherence/Tangosol.Config/coherence-pof-config.xml</include>
<include>file://pof-config.xml</include>
and here is what pof-config.xml file look like
<?xml version="1.0" encoding="UTF-8"?>
<pof-config xmlns="http://schemas.tangosol.com/pof">
<user-type-list>
In my C# visual studio project, this is where I load my-pof-config.xml in app.config
<coherence>
<cache-factory-config>coherence.xml</cache-factory-config>
<cache-config>coherence-cache-config.xml</cache-config>
<pof-config>my-pof-config.xml</pof-config>
</coherence>
and this is what I saw in the log...
2012-02-23 14:35:35,529 DEBUG Coherence (null) - 2012-02-23 14:35:35.529 level(thread=System.Threading.Thread): Loaded POF configuration from "FileResource(Uri = file://my-pof-config.xml, AbsolutePath = D:\worktrees\ads\mainline\v2\ads\demos_cs\build\my-pof-config.xml)"
2012-02-23 14:35:35,545 DEBUG Coherence (null) - 2012-02-23 14:35:35.545 level(thread=System.Threading.Thread): Loaded included POF configuration from "EmbeddedResource(Uri = assembly://Coherence/Tangosol.Config/coherence-pof-config.xml, AbsolutePath = assembly://Coherence/Tangosol.Config/coherence-pof-config.xml)"
2012-02-23 14:35:35,623 DEBUG Coherence (null) - 2012-02-23 14:35:35.623 level(thread=ExtendTcpCacheServiceCSharp:TcpInitiator): Loaded POF configuration from "FileResource(Uri = file://my-pof-config.xml, AbsolutePath = D:\worktrees\ads\mainline\v2\ads\demos_cs\build\my-pof-config.xml)"
I don't see pof-config.xml is loaded at "Loaded included POF configuration....". How do I get around it so I can load multiple pof configuration files for c# client?

Hi,
Not sure about C# but I would suggest try removing file:// from
<include>file://pof-config.xml</include>and keep pof-config.xml and my-pof-config.xml in the same directory.
Hope this helps!
Cheers,
NJ

Question: Best practices for dealing with multiple AM configurations

Hello all,
I have a project using ADF Business Components and ADF Faces. I would like to set up multiple configurations for the Application Modules to support the following scenarios:
1). Local testing and debugging - using a connection defined in JDeveloper and AM Pooling turned off.
2). Testing and debugging on an application server - using a JDBC Data Source and AM Pooling turned off
3). Production deployment - using a JDBC Data Source and AM Pooling turned on.
It is no problem to create multiple AM configurations to reflect this scenario. In order for the web part of the application to use the correct configurations, the DataBindings.cpx file must specify the correct ones. I was thinking to have 3 different DataBindings.cpx files and to change the CpxFileName context-param in the web.xml file as needed.
My questions:
1). Does this make sense as an approach? It should be better than having to change a single AM configuration every time I deploy or test. Is there any easy way to keep multiple DataBIndings.cpx files in synch, given that we may add new pages from time-to-time? Alternatively, can we do some type of "include" processing to include just the dataControlUsages section into a common DataBindings.cpx file?
2). How would you manage the build-and-deploy process? For the most part, in JDev we would be using configuration #1. The only time to switch to configuration #2 or #3 would be to build an EAR file for deployment. Is this something that it would make sense to accomplish with ANT? I'm not an ANT expert at all. The ANT script would have "build-test-ear" and "build-prod_ear" targets which would swap in a correct web.xml file, recompile everything, build the EAR, then put the development web.xml file back. I'm relatively sure this is possible... comments?
3). Is there some other recommended approach?
I appreciate any insights from experience, or even just ideas or thoughts that I can test out.
Best regards,
John

Hi K,
Sorry for the long long delay in responding I've been traveling - and thanks for the e-mail tickler too...
To answer your question in short, I do think that ANT is the right way to go; there is an extra ANT task called XMLTask that I was able to download and play with, and it seems it would make this manipulation of the cpx file (or the xcfg file, for that matter) pretty straightforward. I don't have any code to post; it's just in the conceptual stage for me right now. I didn't see anything magical in JDev 11 TP3 that solved this problem for me either.
Having said all of that, it's more complicated than it might appear. In addition to the DataBindings.cpx file (stores, among other things, which AM configuration to use for each data control), it's certainly possible to programmatically access an AM (specifying the configuration either directly in the code or via a properties file/etc). I'm not sure what the most common use case for AM configurations is, but in my case, I have a Test configuration and a Prod configuration. The Test config, among other things, disables AM pooling. When I am developing/testing, I always use the Test config; in Production, I always use the Prod config. Perhaps the best way for me to do this would be to have an "Active" config and use ANT tasks to copy either Test or Prod to "Active." However, our Subversion repository is going to have a few complaints about this.
John

Multiple runtime configurations

Hi,
I'd like to set up multiple runtime configurations on a project. i.e. I want to be able to run the same java class with multiple program arguments or virtual machines. Is there any way I can do this without creating a separate project or using <target> in an ant file?
Thanks in advance for any help,
Venura

Hi Venura,
You can do this in Project Properties. On the Profiles page, click New... to create a new profile. You can change many of the runtime settings associated with the project for each individual profile.
Thanks,
Brian
JDev Team

T530 multiple display configuration lead to errors when closing the laptop

Hello,
I have a Lenovo T530 2429CTT and I am having some trouble when trying to set up my multiple display configuration with a Lenovo ThinkPad Mini Dock Plus Series 3.
I have an external Samsung LCD monitor which is connected to the Mini Dock via DisplayPort.
I am running Win 7 Prof.
The problem I see is with an application which uses DirectX. The display looks fine in the following configuration:
- Laptop open
- External Samsung LCD Monitor on
- Display cloned so that both devices show my desktop
The issues appear when I close the laptop. I do this because in my office I only work with the external monitor so I don't need the internal display of the laptop at that moment.
When I close the laptop the following happens:
The external display gets dark for some seconds. It comes up again, gets dark and after a while (maybe 10 sec) it stays active. Sometimes I see a notification that the color scheme has changed to Win 7 basic.
Everything seems to be fine now but when looking at the DirectX based display of my application I have some problems for example with the refresh (the display looks very weird).
BTW: The laptop has an internal and an external graphic card (Internal: Intel HD 4000, External: NVIDIA NVS 5400M).
So it seems as when the laptop gets closed, the internal graphics will be turned off. Due to this the display on the external monitor also changes the settings of the graphhic card (maybe it gets turned in an energy saver state).
I was looking at many of the NVIDIA settings without any success so hopefully somebody in this forum has an idea what is happening there.
Thanks,
Andreas

Hi,
I'm trying to buy the exact same configuration.
although i cannot find this 2429CTT on lenovo site anywhere, is available for selling on a known european supplier.
and my propose is to have 2 Monitors connected, so I'll follow this inquire very closely and hold my order until then.
do you have any update on it?
just by curiosity, what about the rest? how does the PC feels to you? everything else is working?
thanks

My motorola Maxx indicates multiple WiFi networks available but will not connect to any of them.

My motorola Maxx indicates multiple WiFi networks available but will not connect to any of them.

We want to bring back the control over your data access, LeRoyN! Thanks to rcschnoor for offering this support. Also may I ask what type of error messages are you seeing when attempting the connection? Have you been able to connect to these same networks in the past?
Thank you,
YaleK_VZW
Follow us on Twitter @VZWsupport

Multiple Workspace configuration in single environment

Hello Gurus,
Just a small doubt here.
Can we have multiple workspace configured within a single environment.? If Yes, how ?
Thanks and Regards,
Saurabh

Hello Gurus,
Still looking for the answer for the same.
Thanks
Saurabh

Using multiple Development Configurations

Hi,
I am runningn NWDS 7.0.0.6 and I want to configure multipe Development Configurations because I have to connect to serveral NWDIs (to differenct customers).
Any Idea?
Kind regards
Michael

With a single NWDS instance you <b>can</b> actually import multiple development configurations, not just one. If you want to import configurations from different NWDI servers, you would have to switch the Development Configuration Pool settings under Window -> Preferences -> Java Development Infrastructure to point to the other NWDI's SLD.
The biggest problem with the current releases of NWDS is however that they cannot use multiple sets of credentials for logging on to these development configurations: You can only log on to configs of multiple NWDI servers if you have the same userid and password on these servers.
Note that the Development Configuration Pool setting is only used when you want to import configurations, it is not used during the log on process.

WRT160N - does it support multiple vLan configurations?

I'm trying to find more detailed tech. specifications of this thing (WRT160N), but unfortunatelly I get only some basic marketing messages... I need to understand if this router supports vLAN configuration, as I'm thinking to have IPtv and internet on the same. My provider does integrates the IPtv into separate vLAN, but their HW is not too good in other perspectives... So I'm thinking about linksys.
So does it support multiple vLAN configuration (i.e. dedication of separate vLAN to exact port)?

No. VLANs are not supported in Linksys devices. You'll have to look at Cisco Small Business or better.

Multiple application Configurations /Component Configurations.

Hi,
I want to know in which scenario we have to create multiple application Configurations and multiple Component Configurations.
Plz explain With examples...
Best Regards,
dev

A component config controls the component it self. All views.
eg a Component when called with config SALES, hides all PRODUCTIN fields.
Or a Component called with config EXTERNAL automatically switches fields to DISPLAY only. whatever...
You can see why many configs of 1 component make sense.
Now you also know a component can embed other components.
SO how to you string these all together.
When you configure an application:
You simple choose one of the configurations for all embedded components
that should be used.
The APPL config tool, looks inside components to find other embedded components.
You can have a deep selection of component configuration until you reach the lowest level.
Hence why APPLICATION configuration is required and not just component configuration.
The application config can have many component config selections inside it.
Cheers
Phil

My early 2011 Macbook Pro on start up has wifi, but drops it soon after and never comes back, AHT shows nothing wrong. Multiple wifi's tried and same on all.

My early 2011 Macbook Pro on start up has wifi, but drops it soon after and never comes back, AHT shows nothing wrong. Multiple wifi's tried and same on all. I have also re-installed OSX from scratch and still happens.

I have the same problem. I have a white macbook 2010, with mavericks os. I just found my mac not powering on and then I tried to run it on safe mode by holding the shift button but it will turn off seconds after I let go of the shift button. I am able to access the desktop and use it while holding the shift button the whole time. It's a bit slower than before but I figured maybe it's because of holding down shift button.
I went to the Apple Store to have them look at my mac and I was told it's a failed hard disk. I wasn't told why he was able to conclude that a failed hard disk is causing the problem, I was just told to get a replacement. But the thing is when I ran Disk Utility it says, "disk appears to be okay." So I also feel like it's possible it's not a hard disk issue because it's also the first time it happened. My mac was working perfectly fine before all this.
Do you know anything else that could cause this problem? Were you able to find out what's wrong?
Thanks.

How to set up multiple log4j configurations for multiple WAR packages?

hi all,
the EAR that i am trying to deploy has multiple WARs.
I need to configure separate loggers for each these WARs.
Could any of experts can help me out.

Hi
Depending on your needs, you may find that Set level offers the best approach:
Within a Set you have the Playbacks (Set Level, so they work for the entire set) with individual patches in the set "live" for the EWI etc as needed.
You need only map one set of controls for all the Playbacks since only 1 set can run at a time.
CCT

Multiple vlans configuration issue with RV016 router and SG 300-10MP witch

Hi,
I have to configure multiple vlans served with a unique DCHP server . As first step, I just will The DHCP server to serve 2 vlans. The following is the hardware and configuration that I implemented :
Router (RV016 10/100 16-Port VPN Router) as gateway mode:
IP : 172.16.0.1/24
DHCP Server :
IP : 172.16.0.2/24 GW: 172.16.0.1
2 subnets :
172.16.1.0/24 GW: 172.16.1.1 to serve vlan 1
172.16.2.0/24 GW:172.16.2.1 to serve vlan 2
Switch (SG 300-10MP 10-Port Gigabit PoE Managed Switch) as layer 3 mode:
IP 172.16.0.254 (vlan 8 default)
Vlan 1 : 172.16.1.1
Vlan 2 : 172.16.2.1
1 device connected on each vlan
a workstation on the vlan 1
a laptop on the vlan 2
In this scenario (see the attached pdf file) the DHCP server is connected on a router, hosts on vlans dont receive any IP address.
But If I connect the DHCP server on a trunked switch port and adapt the DHCP server gateway 172.16.0.1 to 172.16.0.254, hosts receive ip address properly.
I have to connect the DHCP server directly to the router. How can I do that, what is wrong in the configuration ?
I hope the explanations are clear enough and my English too
Any help will be highly appreciated,
Zoubeir

Hi Eric, the small business group doesn't support the ASA config, but I can help with the switch.
A couple things I notice in your description-
48 port (192.168.1.254) and the other 24P (192.168.1.253) we have a second vlan 20 set up on the 24P switch (192.168.2.253) we have ports 1-12 set for vlan20 (untagged and trunk), the remaining ports on on the default vlan 1.
The connection between the switches, is it 1u, 2t?
The link between the switches should be 1u, 2t, the switches support the trunking and vlan tagging, meaning all communication will work fine.
We have the 24p and 48p switches connect using GE1 and GE1. We are unable to ping a device on vlan 20 ( on the 24p switch
The 24p switch should be in layer 2 mode, if you have the 48 port l3 switch upstream. Additionally, you need to have the default gateway set on the 24p switch.
We have a static route set on the 24p switch (0.0.0.0 192.168.1.0).
Between the switches, it shouldn't require any static routes, assuming you correctly trunk / tag your ge1 ports, with both switches operating in l3, the ip route table dynamically builds the connected routes, therefore a static route is redundant.
-Tom
Please rate helpful posts

Handling Unit label (V6) - multiple printers configuration

I would like to print the handling unit label (V6) in multiple printers. Currently the condition records are set to plant/Packaging material combination with printing in one printer. I would like to have the ability to print to different printer in HU02 t-code based on userID. Can I configure it based on storage location or userid? Thank you.

Are you using WM+HUM or only IM+HUM?
In OMJ3 you can define printer by Storage Location,
in OMLV you can defin printer by WM organizational levels (storage types), movement type etc.
You can use NACE t-code to set the output type you want in addition to MDoc printout.
Can you explain your config, when are you printing your HUs at the moment?

Multiple wifi configuration

Similar Messages

Maybe you are looking for