Multiple wiki's on the same server

Is it possible to have multiple wiki's on the same server. I do not mean having 2 wiki pages. however more like having 2 websites from the same server and each having their own wiki sites.
From just a quick play with the possibility both sites still reference from the same place so both sites would see the same wiki pages.
I was thinking of trying to use realms however the wiki info is not kept in the folder that is managed by realms

This can be done, but it really depends on the load balancer you use.
There is no recommendation from BusinessObjects and you might want to consult the load balancer vendor for instructions and support.
Regards
Caroline

Similar Messages

  • Running Multiple ODI Agents On The Same Server

    Is it possible to run multiple ODI Scheduler Agents simultaneously on the same Server?
    As we provide Work repository name in ODI params file and if we have different work repository
    and we want to run schedular agent on same server how can we point to the other work repository.
    Do we need to create another installation of ODI agent files on same server?
    Thanks
    Kashi

    Hey Kashi,
    You do not have to instal a separate Agent files again. All you need to do is to make sure that each set of agent has all the required parameter files which inclues, odiparams.bat , agentstart.bat and agentstop.bat(names may not be exactly same). Here is a website that gives you more details regarding creating multiple agents on same server
    http://www.business-intelligence-quotient.com/?tag=odi-agents
    regards,
    k

  • Running Multiple Web Dispatchers On The Same Server

    Is it possible to run multiple instances of Web Dispatcher on the same server?  I want to have one instance pointing to my WAS 6.40 system and the other instance pointing to my BW system.  I have set up two services on the NT server:  One named the standard sapwebdisp.exe and the other named sapwebdispbw.exe.  I am using two separate profile files, one for each instance.  The services start O.K.  However, when I attempt to access my BW system using the HTTP port as defined in the BW profile and the Web Dispatcher profile, I get a message back saying that "The server you are attempting to access has refused the connection with the gateway. This usually results from trying to connect to a service that is inactive on the server."  I have double checked that the service is running and that the BW system is up and available.
    Any help is appreciated.
    Regards,
    Doug

    Hey guys,
    it seems you are web dispatcher specialists
    I have problems connecting even one server
    I would like to add an Enterprise portal (DEP) to the web dispatcher.
    My config file :
    SAPSYSTEMNAME = SDM
    SAPGLOBALHOST = webdispatch
    SAPSYSTEM = 00
    INSTANCE_NAME = W00
    DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTI386
    DIR_EXECUTABLE = $(DIR_CT_RUN)
    Accesssability of Message Server
    rdisp/mshost = 172.20.40.6
    ms/http_port = 8101
    Configuration for medium scenario
    icm/max_conn = 500
    icm/max_sockets = 1024
    icm/req_queue_len = 500
    icm/min_threads = 10
    icm/max_threads = 50
    mpi/total_size_MB = 80
    SAP Web Dispatcher Ports
    icm/server_port_0 = PROT=HTTP,PORT=80, TIMEOUT=120, EXTBIND=1, TIMEOUT=120, PROCTIMEOUT=120
    Is it possible for you to paste your config file here ? 
    With explanation what the portal name is en waht the web dispatcher name is ?
    The error I get :
    no valid destination server available for '!ALL' rc=7
    Where can I adjust this !ALL and !J2EE group ?
    Where can I manage the /link/ ? (like /irj/portal)
    If you need any info please let me know.
    THank you for your time & help
    BUD

  • How to make Adobe acrobat feature to convert SAP  Pages to PDF available for multiple users connected to the same server

    We have installed Adobe Acrobat X Pro- English,Francais,Deutsch version 10.1.9 in our test environment and tried  testing it for converting SAP pages into PDF with a few pilot users. In doing so we faced a challenge, where only one user at a time can use Adobe Acrobat PRO to convert SAP pages in to PDF.As long as the first user who  is connected to Adobe Acrobat Pro via SAP isn’t logged off, other users connected to the same  server  are not being able to get the “Save As” dialog box to save the PDF in their preferred location.
    This is a business requirement and we need an urgent solution for the same. Can anyone help us in telling us if this is possible and if yes the how to go about?

    It's not something we deal with here, the LiveCycle products are a different world. Key points: Adobe LiveCycle is a range of products, some desktop, some server. LiveCycle PDF Generator is the one you should look at, it comes in 3 editions. License terms are by negotiation. Key management is via its Java API.

  • Multiple users connected to the same server

    Hi there,
    I was wondering if this scenario would be possible to be implemented on a Snow Leopard Server installed on Mac Mini 2.66:
    - one iphone developer that needs to be remotely connected to the server to develop apps
    - one project manager that will handle the project files and documentation. He will login to the server and upload/download files
    - one app GUI designer that will login from time to time, to make the design in photoshop.
    Can these 3 users be logged in the same time on the same server without any lag? Or this version of server will only support one user at a time?
    Thank you!

    Yes, you can do ssh and terminal connections, but I'm guessing that's not what you want here; I'm guessing you're headed over from X Windows or (more likely) Windows Terminal Services.
    Google for Aqua Connect and related for the path that you're headed toward.
    In general, Apple Mac OS X and Mac OS X Server runs one seat and one keyboard and one display per station, whether it's an Xserve server or a MacBook or whatever.

  • Multiple application instance on the same server instance

    Can we have multiple instances of the same application on a single WLS?? For ex, can I have two app.ear files in different application directories??
              

    Hi Nilesh,
    Can you please clarify your landscape as this will help in getting answers to your question.
    In general adding instances (and/or server nodes) should be considered for increasing capacity rather than impoving performance. Specifcially, adding instances (and/or server nodes on the same host you risk a situation where the processes compete for resources which will have a negative effect on performance. If you do need to combine instances on the same host, make sure there is enough hardware (specifically memory in case of JAVA).
    Hope this helps,
    Best regards, Walter

  • Multiple Tomcat instances on the same server

    Can we have multiple tomcat instances load balanced on the same physical box without VM. Has there been any such implementations. How can CMS be distributed across. What can the know architecture for the same.
    Regards
    Vijsy

    This can be done, but it really depends on the load balancer you use.
    There is no recommendation from BusinessObjects and you might want to consult the load balancer vendor for instructions and support.
    Regards
    Caroline

  • Running multiple oracle versions on the same server...

    Hi, I have a server that is currently running oracle rdbms 10.2.0.3 on linux Itanium platform and the database that is currently on that server uses oracle ASM for it's files.
    We have a need to also run a oracle rdbms 10.1.0.3 on the same sever and I would like to know if this is possible and will the 10.1.0.3 database be able to use the already installed and running ASM instance that has been created during the 10.2.0.3 install?
    Thx.

    Because it is not just a new database we are trying to migrate an exisiting database to this new server and there is too much data which is time sesitive and the original machine is not very powerful and the only way I can foresee us being able to migrate in a time that would meet our requirements in to use dataguard to setup a physical syandby on the new server and then perfrom a failover to get the database live on the new hardware.
    Thats why we are kinda stuck with the 10.1.0.3 database at this point in time until we can get it moved onto a server and staorage platform that will also allow us to upgrade in a timely fashion as welll. So your next question is why don't we just upgrade the existing database where it is know well the reason I am reluctant to upgrade on the existing server is because we only have access to tape backups on this system and I do not have alot of faith on the tape restore as it take a long time to complete and can be error prone.

  • Multiple presentation servers using the same RPD

    Hi everyone,
    So as most people know, the iPhone has a cool app that allows you to login and look at your OBIEE content. In theory it's really cool, but as it turns out, a lot of the cool graphs default to Flash and Flash is not supported by the iPhone.
    Using a flag in the instance config file, its possible to default all graphs to png's instead of Flash. But that causes all the interactive drillability to go away since it's just a flat picture.
    It seems that an elegant solution to this issue would be to have two presentation services running; one that defaults to Flash and one that defaults to png's. Then let the OC4J container determine if the device accessing the website is a mobile device or a full client browser. Mobile devices get routed to the png's and non-mobile devices go to the standard Flash page.
    Although not supported by Oracle, it is possible to setup multiple presentation services on the same server. In fact, RNM has a great blog about how to accomplish this (http://rnm1978.wordpress.com/2009/08/25/multiple-rpds-on-one-server-part-1-the-bi-server/).
    I was able to setup two presentation services (AnalyticsWeb and AnalyticsMobile) and point them at the same catalog folder. That way you don't have to duplicate you're work.
    The one thing I couldn't figure out how to do was to point them at the same RPD file. Ideally, we would have one rpd file with the master metadata definitions, and both presentation services would drive from that single RPD. However, the BI Server throws and error of the same RPD appears twice in the NQSConfig.ini file. I also created a shortcut to the master RPD, but upon startup, the BI Servers said that it was not a valid repository file.
    Worst case scenario, I could just use copy & paste to duplicate the single repository. And then each time I updated one, I would just need to delete the other and re-copy. But that seems a little tedious and I was hoping for a more elegant solution.
    Does anyone know how I could get the NQSConfig.ini to let me point to the same RPD twice? Is there some kind of symbolic link or image I could create?
    If it helps, I'm working with OBIEE 10.1.3.4 on a Windows Server 2003 environment with the OC4J standalone container.
    Thanks for the help!
    -Joe

    Hey Everyone,
    Just to add the finishing touch to this thread, the following can be implemented to perform the redirect based on mobile versus traditional PC devices.
    In the folder: C:\OracleBI\oc4j_bi\j2ee\home\default-web-app
    I created the following OBIEE.html file
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
    <html lang="en,us">
    <HEAD>
    <TITLE>Test OBIEE Redirect Page<TITLE>
    </HEAD>
    <BODY>
    <script type="text/javascript">
    var agent = (navigator.userAgent).toLowerCase();
    var weburl = './analytics/';
    var moburl = './analyticsMobile/';
    var reg_exp = /(ipod|iphone|android|opera mini|blackberry|palm os|palm|hiptop|avantgo|plucker|xiino|blazer|elaine|windows ce; ppc;|windows ce; smartphone;|windows ce; iemobile|up.browser|up.link|mmp|symbian|smartphone|midp|wap|vodafone|o2|pocket|kindle|mobile|pda|psp|treo)/;
    if( reg_exp.test(agent) ) {
         window.location = moburl;
    else {
         window.location = weburl;
    </script>
    </BODY></HTML>
    The javascript gets the USER agent variable and does a regular expression match to see if it's any popular handheld device. If so, it redirects them to the mobile address. Otherwise the user is directed to the standard site.
    All I need to do is pass around the URL:
    http://localhost:9704/OBIEE.html (instead of the standard http://localhost:9704/analytics)
    And users will be dynamically sent to the correct location.
    thanks everyone!
    -Joe

  • Running Cluster LDOMs on the same server

    I'm doing some testing of moving ldom's to multiple servers and sometimes the same server. I'm running into a problem where I can't bind the same vdsdev device to multiple ldom's on the same machine. I'm doing CFS within the guest domain and it works fine across machines but not on the same one. Anyone else run into this kind of issue.
    Thanks
    Buck

    I have tested it, but the documentation does not recommend using this feature in production. You can achieve the same thing with creating test applications/databases.Also, when you run 2 instances of the agent on one box, you must modify the essbase.cfg of the client machine to indicate which instance (port) that client will connect to.Regards,Jade------------------------------Jade ColeSenior Business Intelligence ConsultantClarity [email protected]

  • Can you run multiple APEX listeners for different instances on the same server

    Please confirm that we can run multiple APEX listeners for different instances on the same server?  Is it an xml setup configuration or do we need to do more??
    Thank You,
    Tony Miller
    SmartDog Services
    Austin, TX

    Yes.. Just exactly what I was looking for...
    Thanks Jari!!
    Thank You,
    Tony Miller
    SmartDog Services
    Austin, TX

  • DataGuard - multiple standbys on the same server

    DataGuard - multiple standbys on the same server
    I have my primary database on one server and I have 2 physical standby databases on another server. Is it possible to configure it so that the archive logs are pushed to the backup server only once? Can they be written to a single location on the backup server and accessed by both standby databases?

    Justin... Hold on !!! it seems that user is asking for test, not for real scenario.
    Anyways, it could be possible without mentioning undocumented parameters. You just need to enable log_archive_dest_n and log_archive_dest_state_n parameter and configure tnsnames so you can mention service there.
    Pls. check and revert back if I am wrong here.
    Cheers !!!
    Star Nirav
    Personally, I would be suprised if you could get two
    standby databases to run on a single failover machine
    without resorting to some of the unsupported
    parameters that are required to get a primary &
    secondary running on a single machine for development
    purposes. I can't imagine how two standby databases
    could pull archived log files from the same directory
    and apply them at completely different times.
    Generally, you would want your failover system on a
    different machine than the reporting system since
    they serve relatively different purposes.
    Alternately, have you looked at using a logical
    standby to serve both purposes?
    Justin

  • Running multiple agents on the same server

    Has anyone run multiple instances of essbase on the same server, using the agentport command? If so, how well did it work and what do you think about running it in a production environment?Thanks alot!

    I have tested it, but the documentation does not recommend using this feature in production. You can achieve the same thing with creating test applications/databases.Also, when you run 2 instances of the agent on one box, you must modify the essbase.cfg of the client machine to indicate which instance (port) that client will connect to.Regards,Jade------------------------------Jade ColeSenior Business Intelligence ConsultantClarity [email protected]

  • The Windows SMB feature has file locking if multiple users are accessing the same file.  Does Snow Leopard Server File Sharing (AFP) provide similar features?

    The Windows SMB feature has file locking if multiple users are accessing the same file.  Does File Sharing (AFP) on Snow Leopard Server provide similar services?

    Were you ever able to solve this problem. I'm having similar issues since upgrading to snow leopard. Four macs connect to a Windows Server 2003 for shared files. Each user has full permissions & when we "get info" it shows read & write permissions. Two of the computers were running 10.4, two were running 10.5. Everything worked properly until upgrading to snow leopard. Some files let me copy, move, delete. Others either just hang up or we get a "no permission" error. Also getting a "pdf is in use" error, even when the file/folder doesn't contain a pdf. We had our IT rep check the server who said everything is in working order. They don't represent macs any longer but feel that it's a mac problem. I would have to agree since this problem only started after the upgrade, and the one machine that was not upgraded (still running 10.5.8) is not dealing with these problems.
    Lastly, I would install 10.5 back on all of the computers if I could, but the leopard disk that came with one of the computers wouldn't work with the 2 machines running 10.4 and I didn't see it available at the apple store. I'll buy it if it's still available, but why wouldn't the disks that I have work?
    Thanks for any help

  • Multiple Apps on the same server

    Hope you can help and point me in the right direction.
    I am managing a CF internet based application built using CF
    6.1 and which talks to a MS Access 2K dB. The app is running on a
    MS Windows 2K Adv Server, IIS [with a SSL cert.] and CF 6.1 Std
    Server.
    I now need to run a second separate application on the same
    server.
    My questions are:
    1. Is this possible?
    2. If yes to 1 can anyone point me in the right direction as
    to configuring IIS and CF to run the second application? This
    second app will also require a SSL.
    TIA, K

    First off run as far and fast away from using Access for your
    DB back end as possible. Access isn't meant for this kind of work.
    Next, you'll need to setup a new virtual server (with its own
    dedicated IP address) in IIS.
    Configure your new server to its new web root and optionally
    reconfigure your log files.
    Create a new CSR with all the right information and send it
    to your SSL creator. Pay for cert with them, and wait for it to
    come back. Install new cert and optinally reconfigure the site to
    force SSL where necessary.
    Add any necessary data sources in the ColdFusion admin
    If your root config stuff for CF was setup correctly
    everything should just magically work (tm).

Maybe you are looking for