Multiplex files won't drag from source to edit window

I have .mov files from the SLR, the audio can been seen and played from the Source window. However, and this has occured withing past couple of days, I can not grap the file from the window and move it down to editing. The video will drag, but I can not get the audio to come down even as a seperate file. There must be something I did unknowingly a couple of days ago. I have been all over the menus and can't find a solution.
chuck

Mark said
I'm seeing exactly what you show, Steven. ....
However, if source patching is enabled for only a video track, then on dragging from the Source Monitor only the video gets added to the sequence. And, naturally, vice versa if source patching is enabled for only an audio track.
Thats what I am talking about too. ..and it suits me perfectly.
The anomally is that with neither A1 V1 selected ...audio and Video is styill both dropable.
I am fine with that too even though its a little illogical. (Dont fix it on my account)
Thanx for doing the great Vid Steven... you just missed out the important extra option but that was a good way to point out the difference in the discussion... before Jim and I came to blows!.
BTW - nice voice you have.
FWIW: Expanding on why it suits me to only drag one , the other or both by using the Source Selector.
In the case of a shoot (edit) where I have Synch scenes as well as MOS.. that selector is the fastest workflow for me because I can choose quickly on the fly what I want in the Timeline. (audio, video, both)
On a shoot (edit) with all MOS...I map all the clips to No Audio Channnels at the out set and never have to make the decison again.

Similar Messages

.mov files won't drag from library to timeline

Hi, I am new to Final Cut Pro X, so this might be a simple fix, but I when try dragging the file from the library to the timeline, it doesn't drop. Any help would be appreciated.

Not sure what you mean by dragging it "from the library." You mean from some directory within Finder?
That's not how FCPX works.
First, create an EVENT in FCPX. Then you can drag a clip from any EVENT into the timeline (project).

I recorded audio with Quicktime player and the sound files won't disappear from the desktop no matter how I try to put them in the trash...

I recorded audio with Quicktime player and the sound files won't disappear from the desktop no matter how I try to put them in the trash...tried xing out the red x, putting them in the trash...right clicking to make them disappear...nothing works...

Just got rid of them... I closed Quicktime and was asked to delete. So I deleted them. Problem solved.

I uninstalled itunes, downloaded new version and the setup file won't launch. I'm running Windows Vista 64-bit. Can anyone help?

I uninstalled itunes, downloaded new version and the setup file won't launch. I'm running Windows Vista 64-bit. Can anyone help?

Is there an error message when you try to launch the iTunesSetup.exe (or iTunes64Setup.exe)? If so, what does it say? (Precise text, please.)

Just purchased HP 8610 printer, but it won't print from my 8.1 windows computer

just purchased HP 8610 printer, installed it wirelessly to my network but it won't print from my 8.1 windows computer. I can print from my cell phone and I can print using the eprint function, but even though I can see it on the network I can't get it to print a document.

Hi,
Have you ilstalled it software and drivers on your computer yet ? Please download and run the following tool:
http://ftp.hp.com/pub/softlib/software12/COL50849/mp-136589-1/HPPSdr.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

When I record an audio track, there is a waveform. When I stop recording, the waveform disappears and becomes a straight line. It also disappears from the track edit window. But the sound is there. How can I stop the waveform from disappearing?

When I record an audio track using Logic Pro X, there is a visible waveform which appears as I record. When I stop recording, the waveform disappears and becomes a straight line. It also disappears from the track edit window. But the sound is still there. How can I stop the waveform from disappearing? And can I do something to view it after it has disappeared? Anyone know the anser?

In Logic:
Preferences/Audio Set Recording Delay to 0 <zero>
This should always be set to zero unless a specific set of circumstances exist and you're audio drivers do not report position correctly.
On occasion, usually when importing a Logic 9 project, Logic-X randomly changes this to a negative/positive number. It's actually a bug in Logic, as it should always display the waveform.

Files won't transfer from PC to Itunes

All of a sudden, I can't add mp3 files which are on my PC to iTunes. They are able to be dragged from the folder on the PC but don't show up in iTunes. I've tried dragging them and also using the file/add file to library command but neither works. I've tried adding them to My Ipod and to Playlists but nothing works. It all worked OK this morning! Help please!

i have the exact problem last week when I signed up to receive a free epub in the email.
When the email arrived I proceed to open it in ibook on my iphone and started reading, after 2 chapters I decided to sync the phone with my computer and found that it won't sync the newly downloaded epub, not even showing it in the device list in itunes.
So I tried the same thing on my ipad, download to ibook, sync with computer. Same result: the book was not synced and won't show in ipad's book folder in the device list.
Still haven't found a solution

Files won't drag to playlist/ipod since updating 2 diff computers/ipods?

Since allowing our pc's to update to the latest itunes (7) (we are both using windows xp, one is a lap tap and we have min ipods gen 2) we cannot drag tracks that are waiting in the file area to our playlists.
All we get is a round symbol with a line through as you try and drag. I have tried to add music from a cd, changed the format to mp3 and all the other options to see if that works, all the tracks have a little green tick next to them, so they have actually loaded into the library when I’ve asked them to, but they still won't move. In fact now nothing will drag from the right into the left playlist column, or into the ipod when it's connected, on 2 different PC's and ipods. This has only happened since updating itunes, so it most certainly is something to with the program and not our equipment.
I’ve checked that drag and drop is ticked in the start menu too!
Has anyone else experienced a similar problem and found a cure, as now we really can’t add any new stuff to our mini ipods

hiya!
okay, you currently have "automatically update selected playlists only" engaged:
hudgie: iPod syncing options, OR, My iPod is locked in iTunes!
so unless a song is picked up by your "ipod selection" playlist, it won't sync to the ipod:
How to sync music to your iPod when your library is bigger than your iPod storage space
for some tips on how to better control what goes into your ipod when you have that syncing option engaged, see:
hudgie: iPod cannot sync because one or more playlist …
love, b

Web-downloaded epub files won't transfer from iBooks to iTunes

Hi!
Yesterday, on my iPad, I downloaded two epub files from a website (using Safari) and opened them directly in iBooks. They work fine, show up in my Library with no problem. However, I can't get them to sync down to iTunes. This is definitely not the first time I've downloaded directly to iBooks from an app on the iPad (although maybe a first for an epub from Safari?), but this is the first time I've had issues syncing down to iTunes.
I've synced and resynced and resynced and they won't transfer; not only do they not transfer, but if I open the Books folder on the iPad when it's mounted in iTunes, they're not listed. I could put them on my laptop first and then load them into iTunes and to the iPad from there, but I've highlighted and bookmarked in both books and don't want to lose all of that if it's avoidable.
Any ideas? I'm wondering if there's some limitation of iBooks that I don't know. And if there is, is there a way to now get the epub files out of iBooks some other way? (To maintain bookmarks/highlighting.)
Anyway, thanks in advance
P.S. As a test, I just did the same thing on my iPhone with the same results: file won't sync down and doesn't show up when I browse the phone in iTunes.

i have the exact problem last week when I signed up to receive a free epub in the email.
When the email arrived I proceed to open it in ibook on my iphone and started reading, after 2 chapters I decided to sync the phone with my computer and found that it won't sync the newly downloaded epub, not even showing it in the device list in itunes.
So I tried the same thing on my ipad, download to ibook, sync with computer. Same result: the book was not synced and won't show in ipad's book folder in the device list.
Still haven't found a solution

Pdf file won't print from adobe footer pop up

Pdf file won't print form adobe footer pop up

Attached is screenshot. The menubar footer that allow you to print from adobe.

Some iPhoto files won't transfer from external drive to the hard drive.

I had all of my photos on an external drive and I wanted to put them on the hard drive of my iMac.
While copying all of the photos over, some of the files copied as 0 bytes into the "Data," "Originals," and "Modified" folders, but not the same files. So, some images have no thumbnail image in iPhoto (guessing from "Data"), some have no original image, but have a modified image, and some have no image at all (the 0 byte files that are only in "Originals."
The images are all fine on the external drive still.
Any idea of what I can do? Any file I can zap from the library or something to make this work?
Thanks for your help.

Open the library on the EHD with the Finder as shown in this screenshot
and look in the Masters folder to see if any of the original files have zero bytes? Do not make any other changes/alterations, i.e. look but don't touch. If you do find zero byte image files then it's not the copy process that is the culprit but the files are bad to start with.
OT

Premiere CC 7.2.2 Won't display in Source or Program window on startup (just grey)

Hey there,
When I load a recent project I am faced with a grey screen (on both source and program windows) and pressing play does nothing.
In this state, trying to load any clip also crashes premiere.
I have checked composite video is checked and enable transmit but I still get no playback.
I have however found a work around to fix the problem which seems to work but it is rather frustrating to have to do everytime i want to load the project.
The workaround I have found is to load a project without any footage in, then go media and clean the cache.
Now when I load the grey screen project, it generates new preview files and allows me to playback the timeline.
I have deleted all audio files and it still gives the grey screen and checked built in audio is set in preferences therefore feel it may not be an audio issue
I am not using any third party plugins but I do have warp stabiliser applied to some clips and then some nested so I can apply timeremapping.
I wondered if you have ever encountered a similar issue before and could help me find a way of working without the need to clean cache everytime.
Many thanks

I have tried this and sadle I get the same grey screen if I save and attempt to reload the project

New oj5745 won't print from dell laptop using Windows 10

New HP OJ5745 won't print from laptop using Windows 10. Set up is wireless. Norton firewall shutoff during set up. Uninstalled all HP products and reinstalled new printer program. Printer acknowledges connection to wireless network. Printer shows up as default device on laptop. When print command is sent, the printer indicates whirling circle but no results. Bought printer yesterday. Should I return it?

Hi , Welcome to the HP Forums! I see that you cannot print with your HP Officejet 5745 on your Windows 10 PC, and I am happy to help! To verify the printer's hardware is functioning, are you able to make copies from the scanner glass? Copying Documents or Photos with an HP ENVY 5640, 5660, 7640 e-All-in-One, HP Officejet 5740 and 8040 e-All-in-One Printer Series. Have you completed the hardware setup before trying to print from the computer? As shown in this guide, Set Up an HP ENVY 7640, Officejet 5740, or Officejet 8040 e-All-in-One Printer. If you are able to make copies, and completed the hardware setup, then try the steps within this guide, 'Offline' Printer Status Message Displays (Windows 10), and let me know what happens! Hope to hear from you soon! “Please click the Thumbs up icon below to thank me for responding.”

Files won't open from finder or by dragging to application icon in dock

Clicking or double clicking on a file in finder causes it to blink as if it is opening but it does not open. Dragging the file to its application in the dock causes the application to open but the file does not open. I can only open a file from inside an application using File > Open.

Welcome to Apple Discussions.
First of all, are running you have any third party apps that change your system appearance?
If so, try removing them from login items (see below).
Then, create a new account, name it "test" and see how your apps work in that User acct? (That will tell if your problem is systemwide or limited to your User acct.) This account is just for test, do nothing further with it.
Open System Preferences >> Accounts >> "+" make it an admin account.
If the problem is present in the test account also, then it is systemwide. In this case try repairing this with the 10.5.2 Combo Update This is a fuller install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before.
(Note: If you are running build 9C7010 do not install the Update.)
Remember to Verify Disk before update and repair permissions after update from /Applications/Utilities/Disk Utility.
If the problem does not appear in the test account try starting in "Safe Mode" (It will take a bit more time to startup because it runs a directory check first).
If that works go to System Preferences >> Accounts >> Login Items and remove them. Boot normally and test. If there are still problems, go to ~(yourHome)/Library/Contextual Menu Items and move whatever is there to the desktop. Then do the same with /Library/Contextual Menu Items. Lastly, try moving /Users/Home)/Library/Fonts to your desktop and restarting.
Log out/in or restart, if that sorts it start putting items back one at a time until you find the culprit.
Let us know.
-mj

Haguichi won't build from AUR, and won't build from source tarball.

I managed to get Hamachi installed. Go me. But I like having a frontend for things like that, so I tried to build Haguichi from the AUR. Didn't work. I downloaded the source tarball, and running ./configure returned the same error as yaourt.
redpill% ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking for pkg-config... /usr/bin/pkg-config
checking for dmcs... /usr/bin/dmcs
checking pkg-config is at least version 0.9.0... yes
checking for GTK_SHARP_20... yes
checking for NOTIFY_SHARP... yes
checking for GCONF_SHARP_20... yes
checking for GLIB_SHARP_20... yes
checking for DBUS_SHARP_10... no
configure: error: Package requirements (dbus-sharp-1.0) were not met:
No package 'dbus-sharp-1.0' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.
Alternatively, you may set the environment variables DBUS_SHARP_10_CFLAGS
and DBUS_SHARP_10_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
I made sure the dependencies were installed and updated to the latest versions, but it still won't build. What am I doing wrong?

Scimmia wrote:Did you read the comments on the AUR page?
Just did. I guess I'm still a bit noobish

Multiplex files won't drag from source to edit window

Similar Messages

Maybe you are looking for