Multipoint server - What licenses do I need for my classroom
Good day,
For our school we want to setup a Multipoint server for 10 user. We also want to use Microsoft Office.
Can someone help me please, I believe we also need calls? But how many office licenses do I have to buy?
Best regards
Paul
Hi,
general informations under :
http://www.microsoft.com/education/ww/buy/Pages/volume-licensing.aspx
...our "school" distributor in Germany said:
- multipontserver standard, over 10 users premium, Software assurance optional
- 1 CAL per device and 1 for the Server/teacher(!)
- office per device and 1 for the Server
...there are special conditions for schools.
Regards
Hubert
Similar Messages
-
What licensing do I need for this use ?
Lets say Im planning an application which does nothing but
allows the user to upload Adobe PDF documents to our server. Then
once on the server, parse the values from forms on the PDF's and
extract the data. We wont be distributing Acrobat reader or any
other Adobe product, but will provide a link where they can
download the reader.
Also, the PDF's would be created by someone with a copy of
Acrobat pro. These PDF's will need digital signature capability.
Can Acrobat reader handle signatures ?
Here are my questions:
- What licensing do I need, if any, in the above scenario,
other than that for a copy of Acrobat ?
- What are my options for capturing digitical signatures
within a PDF and will the publicly available version of Acrobat
reader allow the end user to sign the documents, provided they
install the extra requirements for handling the signatures ?This isn't the correct forum for this topic, but I may be
able to get you started...
The licensing restrictions on gathering form data from PDFs
is outlined in the EULA for Reader, I believe there is a limit of
500 copies, but I could be wrong ... you should look at the EULA to
be sure.
Beyond that, try posting to the
Acrobat
Forums or contacting a sales rep at Adobe, they may be able to
advise you further. -
What licenses do I need for CUCM and CME
Hi Experts,
I am a newbie to Cisco IP telephony and request your guidance.
My boss has asked me to order some 7942 phones for a CUCM based site and some 7942 phones for a CME based site.
For CUCM 9, I understand that we need an enhanced user licenses on CUCM side.
For the IP phone, I see 2 part numbers and am confused.
CP-7942G - Cisco Unified IP Phone 7942G
CP-7942G-CH1 - Cisco Unified IP Phone 7942G, for Channels, with one station user license
What is the station user license mentioned in the part number CP-7942G-CH1 ? Is it the same as the enhanced user licenses? Assuming i am ordering enhanced user licenses, what should I order CP-7942G or CP-7942G-CH1?
I also see a part number SW-CCM-UL-7942= ? What is this part? is it needed?
And what do I need for CME?
Is FL-CME-SRST-10 enough for the CME?
What is the part number for the phones? Is it CP-7942G or CP-7942G-CCME?
I also see another part number "SW-CCME-UL-7942="? What is it? And is it really needed?
I heard that Cisco simplified Licensing from version 9. At least it doesn't look simple to me :(
Can you please help me, Experts?
Thanks,
PeteHi without knowing your business goals, current network, etc here is some feedback.
Depending on your design, if the sites are connected via a reliable WAN you could run the branch site as SRST and not CME, this way you get a rich feature set of the centralised call manager and simplify licenses, etc.
Anyway, you need to size your CUCME (or SRST) correctly as each Cisco router hardware platform has a maximum supported handsets. If you have a SIP provider new purchased ISRs now come with 10 CUBE licenses other wise you will need something else such as a VIC for dial tone.
For instance the following is a router that comes with 25 CME
C2901-CME-SRST/K9
2901 Voice Bundle w/PVDM3-16,FL-CME-SRST-25,UC Lic,FL-CUBE10
You can add CP-7942G-CCME which is the physical phone and license for CME
Use CP-7942G= for the Call Manager Deployment as you will get UCL Enh or CUWL for the user side
If you have existing routers you will need to obtain upgrade licenses for voice/CME add DSPs if needed for conferencing, media termination, etc, CUBE or voice cards and you can add the phones.
Router handset capacities see Table 7
http://www.cisco.com/c/en/us/products/collateral/routers/2900-series-integrated-services-routers-isr/data_sheet_c78_553896.html
Hope this helps -
What license do I need for 25 SSL VPN Peers
Hi all,
I want to implement Active/Standby cluster with a pair of 5550 ASAs and I have a licensing question. Here is the "sh activation-key detail" output from both devices...
ASA1:
sh activation-key detail:
Serial Number: XXXXX
No active temporary key.
Running Activation Key: XXXXX XXXXX XXXXX XXXXX XXXXX
Licensed features for this platform:
Maximum Physical Interfaces : Unlimited
Maximum VLANs : 250
Inside Hosts : Unlimited
Failover : Active/Active
VPN-DES : Enabled
VPN-3DES-AES : Enabled
Security Contexts : 2
GTP/GPRS : Disabled
SSL VPN Peers : 2
Total VPN Peers : 5000
Shared License : Disabled
AnyConnect for Mobile : Disabled
AnyConnect for Cisco VPN Phone : Disabled
AnyConnect Essentials : Disabled
Advanced Endpoint Assessment : Disabled
UC Phone Proxy Sessions : 2
Total UC Proxy Sessions : 2
Botnet Traffic Filter : Disabled
This platform has an ASA 5550 VPN Premium license.
The flash activation key is the SAME as the running key.
ASA2:
sh activation-key detail:
Serial Number: XXXXX
No active temporary key.
Running Activation Key: XXXXX XXXXX XXXXX XXXXX XXXXX
Licensed features for this platform:
Maximum Physical Interfaces : Unlimited
Maximum VLANs : 250
Inside Hosts : Unlimited
Failover : Active/Active
VPN-DES : Enabled
VPN-3DES-AES : Enabled
Security Contexts : 2
GTP/GPRS : Disabled
SSL VPN Peers : 25
Total VPN Peers : 5000
Shared License : Disabled
AnyConnect for Mobile : Disabled
AnyConnect for Cisco VPN Phone : Disabled
AnyConnect Essentials : Disabled
Advanced Endpoint Assessment : Disabled
UC Phone Proxy Sessions : 2
Total UC Proxy Sessions : 2
Botnet Traffic Filter : Disabled
This platform has an ASA 5550 VPN Premium license.
The flash activation key is the SAME as the running key.
So it looks obvious that I'll have to upgrade the first ASA to support 25 SSL VPN Peers in order to build HA cluster, right?
Now I want to know do I need the "ASA5505-SSL25-K9" license or something else.
Thanks much in advance for any help!Hi all,
as I said I tried to upgrade the ASA1 to version 8.3, but unfortunately the limit of 2 SSL VPN Peers remained.
It seems so that I’ll have to buy that license, although I don’t need that functionality. If someone has some more hints left, I’d be grateful to hear them.
Here is the output from “sh activation-key detail” and below the output from “sh ver”:
Licensed features for this platform:
Maximum Physical Interfaces : Unlimited perpetual
Maximum VLANs : 250 perpetual
Inside Hosts : Unlimited perpetual
Failover : Active/Active perpetual
VPN-DES : Enabled perpetual
VPN-3DES-AES : Enabled perpetual
Security Contexts : 2 perpetual
GTP/GPRS : Disabled perpetual
SSL VPN Peers : 2 perpetual
Total VPN Peers : 5000 perpetual
Shared License : Disabled perpetual
AnyConnect for Mobile : Disabled perpetual
AnyConnect for Cisco VPN Phone : Disabled perpetual
AnyConnect Essentials : Disabled perpetual
Advanced Endpoint Assessment : Disabled perpetual
UC Phone Proxy Sessions : 2 perpetual
Total UC Proxy Sessions : 2 perpetual
Botnet Traffic Filter : Disabled perpetual
Intercompany Media Engine : Disabled perpetual
This platform has an ASA 5550 VPN Premium license.
Licensed permanent key features for this platform:
Maximum Physical Interfaces : Unlimited perpetual
Maximum VLANs : 250 perpetual
Inside Hosts : Unlimited perpetual
Failover : Active/Active perpetual
VPN-DES : Enabled perpetual
VPN-3DES-AES : Enabled perpetual
Security Contexts : 2 perpetual
GTP/GPRS : Disabled perpetual
SSL VPN Peers : 2 perpetual
Total VPN Peers : 5000 perpetual
Shared License : Disabled perpetual
AnyConnect for Mobile : Disabled perpetual
AnyConnect for Cisco VPN Phone : Disabled perpetual
AnyConnect Essentials : Disabled perpetual
Advanced Endpoint Assessment : Disabled perpetual
UC Phone Proxy Sessions : 2 perpetual
Total UC Proxy Sessions : 2 perpetual
Botnet Traffic Filter : Disabled perpetual
Intercompany Media Engine : Disabled perpetual
The flash permanent activation key is the SAME as the running permanent key.
Cisco Adaptive Security Appliance Software Version 8.3(2)
Device Manager Version 6.4(7)
Compiled on Fri 30-Jul-10 17:49 by builders
System image file is "disk0:/asa832-k8.bin"
Config file at boot was "startup-config"
xxxxx up 12 mins 33 secs
Hardware: ASA5550, 4096 MB RAM, CPU Pentium 4 3000 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash M50FW016 @ 0xfff00000, 2048KB
Thanks,
Simo -
How many server licenses do I need for SharePoint 2013?
I am new to the concept of CAL. I am reading about it. I found this linkhttp://sharepoint.stackexchange.com/questions/101914/how-many-server-licenses-do-i-need-for-sharepoint-2013
Suppose there are 2 users in the sharepoint farm. As per above link we requires 7/8 server license. So my question is do we requires 7/8 licences per user basis (2*7/8) or we requires 7/8 licences once only then we require 2 more licenses for 2 users (7/8 +2)?The second option.
If you have 7 SharePoint servers then you need 7 SharePoint Server Licenses.
If you have two people in your company who can use SharePoint then you need two Client Access Licenses (7 server, 2 CAL).
If you had two hundred thousand users who could then you would need two hundred thousand CALs, but the number of server licenses would not change. (7 server, 200,000 CALs). -
What licenses do I need to get a virtual desktop environment up and running?
I’m trying to figure out what licenses I need to get a full Windows Virtual Desktop Infrastructure (VDI) up and running with the Remote Desktop Service (RDS) roles.
I have Win.Server 2012 running Hyper-V, which has about 10 different virtual machines (VM) with either Win.7 or Win.8 installed on it. These VMs will act as virtual desktops (VD) for about 200 people to remotely access and use.
My question is, what licenses do I need to support this scenario?
So far, I’m planning to purchase a few Windows Server 2012 Standard Edition with 10 Client Access Licenses ( $1414.19 each). I’m assuming that’s 1 license for the server and 10 Client Access Licenses (CAL) for users who will access the VDs. I’m also planning
to buy about 200 RDS CALs ($149 each) for the rest of the users to access the VDs. Do I need to buy additional licenses for each VM image I create (the 10 images I mentioned earlier)? These VMs are in a pooled virtual desktop collection, so they reset themselves
when users disconnect from them. If I have personal desktop collections which give unique desktops to each user and saves their settings, will my license have to change if I have that too?
At first I thought just buying the RDS CALs will allow me to install windows where ever I want, how many times I want and all I have to worry about is paying for the client access, but do I need to pay for the OS as well? So essentially I’m doubling the
license?
A side question not really related is, if I have Windows Thin PC, (which was said to come free if I have SA with another product) and bought the Windows Server license, does that come with SA and I can install Windows Thin PC as many times as I want
on which ever desktop I have that will connect to this VDI system?The 10 server licenses are fine, but they don't help you with VDI or remote desktops. I you want to install the Remote Desktop Session Host (formerly known as Terminal Server) role on all your servers und provide remote desktops for your 200 users, 200 RDS
CALs are the right choice (per user or per device).
But if your 200 users have access to virtual desktops, you need 200 VDI licenses. It doesn't matter if you only have 10 virtual desktops if potentially all your 200 users have access to them. VDI licensing is not based on a concurrent model, so every client
that can connect to a VM needs its own license. If Windows 8 Enterprise with SA is on all your client devices, you're set because SA gives users access rights to up to 4 Win8 or Win7 VMs concurrently (local or remote). In addition
it gives them a so-called companion subscription license for personally owned, non-primary devices.
For those primary corporate devices that are without SA, you'll need to purchase a single VDA license for each device that connects to any number of your Win7 or Win8 VMs. The same applies to personally owned devices of users who don't have a primary
corporate device with SA. In other words, BYOD is supported if your primary device is under SA.
For neither VDI/SA nor VDA it does matter if users are connecting to different VM images or only one. Typically, they cannot connect to more than 4 VMs at the same time in order to stay within the licensing limits.
Benny -
What technical components are needed for integration of SAP BI and BO?
Hello,
What technical components are needed for integration of SAP BI and BO?Hi,
you need to setup a BOBJ server (eg. BusinessObjects Enterprise XI 3.1 or BO Edge 3.1) and then install the BusinessObjects integration Kit for SAP on the same machine your BOBJ server runs.
In order to build reports you can either use Crystal Reports (eg Install Crystal Report Designer 2008 V1 if you have an XI 3.1 server installed), WebIntelligence (Install the Business Objects XI 3.1 Client Tools in order to be able to build universes), BusinessObjects Voyager or XCelsius. Please note that you have to always install the BOBJ integration Kit for SAP (should be the same version as your server and client installation) on your clients AFTER you installed one or more of the above client tools.
Please take again a look at the following link for more detailed information (from Ingo) on this:
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a00ee3b2-5283-2b10-f1bf-8c6413e0898f]
Regards,
Stratos -
I have three users that each wanting a copy of Photoshop, InDesign and Illustrator.
I of course want to do this in the most administratively and financially efficient way.
What licenses do I need?
I though at first it would be one cc4t for the company and then three single licences for each user (nine in total)
My reseller is just making me more confused!The links to adobe site just made the confusion worse. :-(
Thankfully I found Wikipedia much clearer.
It looks like the three apps they want are included in cc4t so all I need is three cc4t licences and as an (un-creative) admin there is no charge for me having a "control panel"
Thanks though for trying.
Neil
https://en.wikipedia.org/wiki/Adobe_Creative_Cloud -
What license does VSS need 4500 WS-X45-SUP7-E?
what license does VSS need in 4507R chassis?
1. IP base
2. IP services
Which soft i need to choose in CCM?
Cisco CAT4500E IOS ENTERPRISE or CAT4500e SUP7-E/SUP7L-E Universal or BASE?Fedor,
The 4500X switch the feature VSS is supported on IP-Base.
Is there any info on the VSS license for SUP7L-E ?
http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/release/note/OL_27990-01.html
Under Table 5 - Support by Image Type; VSS is listed as available on IP Base (SUP7E only) and a plain Yes under Enterprise Services
http://www.cisco.com/en/US/prod/collateral/switches/ps10902/ps12332/at_a_glance_c45-696645.pdf
Under Table 1 - Minimum License for VSS; IP Base or higher (7-E) or special license (7-LE and Catalyst 4500-X)
There appears to be no option on the CCO configuration tools to add VSS license on 4500R+E chasiss bundles with for example dual SUP7L-E and IP Base
HTH
REgards
Inayath
*Plz rate al usefull posts. -
What drivers do I need for a dell V515w AIO printer on my MacBook Pro OX S 10.7.2
What drivers do I need for a Dell V515w all in one printer for my MacBook Pro OS X 10.7.2 ????
Uh, tough call, you'll have to check what is used with a PC, drivers or driver+software.
If driver+software then that's a problem as they likely won't write one for OS X.
If drivers you can install these open source one and hopefully it might work, Dell and Apple don't get along so you likely won't see Dell drivers installed by Apple in OS X like they do for others.
http://sourceforge.net/projects/gimp-print/files/ -
What cable do I need for a full migration from a 2011 MacBook Pro to a new current one-wireless migration way too slow.?
All you need is an Ethernet cable.
Just plug it into both machines. Don't bother with a crossover cable, just a plain old Ethernet cable will do. The Ethernet ports on the Macs are smart and will adjust appropriately. -
What adapter do i need for my macbook pro for a presentation
what adapter do i need for my macbook pro for a presentation
What model/Year MBP do you have and what are you connecting it to?
Ciao. -
What cables do I need for Apple TV streaming from my iPad to my tv
What cables do I need for Apple TV, streaming fom my iPad to a HD tv?
if you have an Apple TV it's don over wifi as in wireless so no cable would be required apart from the hdmi cable the Apple TV connects to the tv with
-
What charger do I need for my 2008 macbook pro 15"
what charger do I need for my 2008 macbook pro 15"?
This one:
http://store.apple.com/us/product/MC556LL/B/apple-85w-magsafe-power-adapter-for- 15-and-17-inch-macbook-pro
Ciao. -
What app do i need for my phone printer officejet pro 8500a
what app do i need for my phone printer officejet pro 8500a
Hi tiys,
If you have a Android phone you can download HP home and biz app from the andriod market.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
Maybe you are looking for
-
I can't seem to get the cursor(s) to function on the 3D Surface Plot. I right-click on the front panel plot, go to properties, and select cursor - but then I get an error and LabVIEW crashes. Has anybody had any sucess with this? I've tried it in bot
-
How can i get software off my mac laptop that was put on there by accident ?
how can i get software off my laptop that was put on by accident
-
Hello, first thing: sorry for my poor english. I'm running PS6 (CS6 Design Standard) on Mac OS Mavericks, all up to date. And there is some problem with printing: cmd+P results with "There was an error opening your printer. Printing functions will n
-
Is there a default jabberlocalconfig.xml location
I am currenlty trying to roll out Cisco Jabber 9.6 out to 300+ pcs. I have tried using the .mst file, i have tried using the msi switches, but I cannot get jabber to open to the correct settings on first launch for each user. Currently they have to
-
Problems With Downloading Videos..
Okay, so, today, when I went to download a TV show on iTunes, of course, it charged me and began to download as usual. Once the video was done downloading, before it could process, a box came up saying something along the lines of, "Windows has disco