Multiprovider containing non-cumulative KF and cumulative KF

I have two infocubes that I have placed in a multiprovidor. Infocube #1 contains one non-cumulative key figure and some cumulative key figures. Infocube #2 contains all cumulative key figures. When running a query against the multiprovider, all key figures (from both infocubes) are displayed except for the non-cumulative key from Infocube #1, in which case the value is blanks. Is there something I am missing?

Yes SAP has defined some Restriction for Creation of MultiProvider for Non Cummulatived Key Figures.
"<b>MultiProviders
When the reporting scenario is to be extended, use a MultiProvider as central interface between
query definition and basic InfoProviders. When another InfoProvider is added to the MultiProvider
definition, the technical name of a query based on the MultiProvider remains unchanged.
Use a MultiProvider to reduce the size of the basic InfoProviders. Advantages: parallel access to
underlying basic InfoProviders, load balancing, resource utilization, query pruning.
Make sure that your MultiProvider only retrieves data from relevant basic InfoProviders at query
runtime by
o Using constants in the design of the basic InfoProviders
o Using different key figures in the design of the basic InfoProviders
o Using characteristic 0INFOPROV when designing a query on the MultiProvider
Are you planning to use a MultiProvider? If so, you have to ensure that the characteristics you want
to report exist in all basic InfoProviders.
Do not use more than one non-cumulative InfoCube (InfoCube with at least one non-cumulative key
figure) because this could lead to incorrect query results.
Do not use calculations before aggregation on MultiProvider because this may lead to wrong query
results.
Do not combine basic InfoProviders having inhomogeneous data models in a MultiProvider. Use the
report-report interface between queries defined on the basic InfoProvider instead.
Avoid using only parts of compound characteristics in the constituent basic InfoProvider of a
MultiProvider. For more information, see SAP note 702542."</b>
RefS: How to Do Docs

Similar Messages

Architecture forum contains non-archit. questions and spam

Hi,
The Architecture forum sadly is made of with a majority of questions that have nothing to do with architecture. Please forgive me if this has already been reported.
e.g.
"how do I allocate 1TB of memory"
"how do I detect DVD insert"
"whether one should call Dispose()"
This really is not architecture but more like technical questions better suited for win32, .net or hardware forums.
to make matters worse, nearly every 4th post is spam relating to DVD ripping.
Could we have more control over content in these forums. Thank-you in advanceMicky D

Hi Cara,
Perhaps you misunderstood. I'm not 'asking a question' but rather 'providing feedback' on the junk posts in forums.
I would have thought the forum Suggestions and Feedback for the Forums for my complaint would have been the correct forum don't you agree?
MickyD | http://mickyd.wordpress.com/ Help others by voting my post as 'Helpful' if you think it is so.

Non Cumulative and Cumulative Key Figure

Hi all:
Can anyone clarify difference between Non cumulative KF and Cumulative KF.What is the use of these two and when we go for this.?
Please send me if any docs [email protected]
Rgds
MSK
Note: Points to be reward.

Hi,
Check this Link:
http://help.sap.com/saphelp_bw32/helpdata/en/80/1a62dee07211d2acb80000e829fbfe/frameset.htm
take a look to https://websmp105.sap-ag.de/bw -> SAP BW InfoIndex -> Non-cumulatives
here you can find:
Non-Cumulative Values 3.x (pdf)
Also Check this:
Cumilative and non Cumilative
Non cumulitive Key figures
Bye
R.Ravi

Q54: Cumulative quantity and value fields

Hi All,
Thanks for all previous help in getting me up and running but now I have a new challenge...........
Which table(s) can I find the fields for Cumulative Qty and Cumulative Value as reported in the Stock Audit Report?
Regards,
Robin

Hi Robin,
There is no fields in any tables hold those cumulative quantity and values. Those values are calculated on the fly by program. You can reproduce them easily through an excel formula to verify.
Thanks,
Gordon

The InfoCube contains non-cumulative values

Hi,
While creating multicube for inventory on two cubes its askin the below "The InfoCube contains non-cumulative values. A validity table is created for these non-cumulative values, in which the time interval is stored, for which the non-cumulative values are valid.
The validity table automatically contains the "most detailed" of the selected time characteristics (if such a one does not exist, it must be defined by the user, meaning transfered into the InfoCube)", what is that and how to solve this,
Please through some light on this its urgent.
Chandan

Hi,
Your multi cube is probably based on the infociune 0IC_C03 containing non cumulative key figures taht's why you get this message.
You generaly don't have to maintain validity area unless you are in a special configuration (for exemple loading data from two source systems).
UThe following link should give more information about validity area with non cumulative :
[http://help.sap.com/saphelp_nw04/helpdata/en/02/9a6a1c244411d5b2e30050da4c74dc/frameset.htm|http://help.sap.com/saphelp_nw04/helpdata/en/02/9a6a1c244411d5b2e30050da4c74dc/frameset.htm]
Hope this helps.
Cyril

Error while activating cube contains non cumulative key figures

Hi all,
when i am trying to activate a cube which contains non cumulative key figure it is showing out the following error:
DDIC Object TABL /BIC/LZATTR1NON has not been activated
Table /BIC/LZATTR1NON could not be activated
Please let me know if any one come across with such error
Help are appreciated

Before activating an infocube with non-cumulative keyfigures, the system
design forces the user to enter at least once the screen: maintain
non-cumulative values (validity table). If that step has been performed, activation will work fine.
In the meantime, please do this step explicitly, at least once, when
configuring such an infocube, then you should not have any problem.
Please follow the same process while activating the infocube
Goto Infocube ->Goto Change mode->Menu ->Extra-> goto the screen:
maintain non-cumulative values once.
Walter Oliveira.

Non-Cumulative vs. Cumulative KeyFigures for Inventory Cube Implementation?

A non-cumulative is a non-aggregating key figure on the level of one or more objects, which is always displayed in relation to time. Generally speaking, in SAP BI data modeling, there are two options for non-cumulative management. First option is to use non-cumulative management with non-cumulative key figures. Second option is to use non-cumulative management with normal key figures (cumulative key figures). For SAP inventory management, 0IC_C03 is a standard business content cube based upon the option of non-cumulative management with non-Cumulative key figures. Due to specific business requirements (this cube is designed primarily for detailed inventory balance reconciliation, we have to enhance 0IC_C03 to add additional characteristics such as Doc Number, Movement type and so on. The original estimated size of the cube is about 100 million records since we are extracting all history records from ECC (inception to date). We spent a lot of time to debate on if we should use non-cumulative key figures based upon the standard business content of 0IC_C03 cube. We understand that, by using Non-Cumulative key figures, the fact table will be smaller (potentially). But, there are some disadvantages such as following:
(1) We cannot use the InfoCube together with another InfoCube with non-cumulative key figures in a MultiProvider.
(2) The query runtime can be affected by the calculation of the non-cumulative.
(3) The InfoCube cannot logically partition by time characteristics (e.g. fiscal year) which makes it difficult for future archiving.
(4) It is more difficult to maintain non-cumulative InfoCube since we have added more granularity (more characteristics) into the cube.
Thus, we have decided not to use the Cumulative key figures. Instead, we are using cumulative key figures such as Receipt Stock Quantity (0RECTOTSTCK) , Issue Stock Quantity(0ISSTOTSTCK)
, Receipt Valuated Stock Value (0RECVS_VAL) and Issue Valuated Stock Value (0ISSVS_VAL). All of those four key figures are available in the InfoCube and are calculated during the update process. Based upon the study of reporting requirements, those four key figures seems to be sufficient to meet all reporting requirements.
In addition, since we have decided not to use cumulative key figures, we have removed non-cumulative key figures from the 0IC_C03 InfoCube and logically partitioned the cube by fiscal year. Furthermore, those InfoCube are fiscally partitioned by fiscal year/period as well.
To a large extent, we are going away from the standard business content cube, and we have a pretty customized cube here. We'd like to use this opportunity to seek some guidance from SAP BI experts. Specifically, we want to understand what we are losing here by not using non-cumulative key figures as provided by original 0IC_C03 business content cube. Your honest suggestions and comment are greatly appreciated!

Hello Marc,
Thanks for the reply.
I work for Dongxin, and would like to add couple of points to the original question...
Based on the requirements, we decided to add Doc Number and Movement type along few other characteristics into the InfoCube (Custom InfoCube - article movements) as once we added these characteristics the Non Cumulative keyfigures even when the marker was properly set were not handling the stock values (balance) and the movements the right way causing data inconsistency issues.
So, we are just using the Cumulative keyfigures and have decided to do the logical partitioning on fiscal year (as posting period is used to derive the time characteristics and compared to MC.1 makes more sense for comparison between ECC and BI.
Also, I have gone through the How to manual for Inventory and in either case the reporting requirement is Inception to date (not just weekly or monthly snapshot).
We would like to confirm if there would be any long term issues doing so.
To optimize the performance we are planning to create aggregates at plant level.
Couple of other points we took into consideration for using cumulative keyfigures are:
1. Parallel processes possible if non-cumulative keyfigures are not used.
2. Aggregates on fixed Plant possible if non-cumulative keyfigures are not used. (This being as all plants are not active and some of them are not reported).
So, since we are not using the stock keyfigures (non cumulative) is it ok not to use 2LIS_03_BX as this is only to bring in the stock opening balance....
We would like to know if there would be any issue only using BF and UM and using the InfoCube as the one to capture article movements along with cumulative keyfigures.
Once again, thanks for your input on this issue.
Thanks
Dharma.

Opening and Cumulated Balances of PCA

Dear BI Gurus,
I am using two standard (PCA) Data Sources
<b>1. 0EC_PCA_3 and
2. 0EC_PCA_4</b> to Load data into my Custom Cube.I need Cumulated balance and Opening Balance of Actual Line Items for my reporting purpose.
There is an object 0BALANCE which is not getting populated from the 0EC_PCA_3 Data Source.
We are able to get only the Cumulated Balances of Periodic Transfer, but unable to get the Balances of all the other Accounts.
So, can anyone please help me out in getting the Cumulated Balances and Opening Balances of the Account Numbers.
With regards

For Delta update
The extract structure does not contain the BALANCE field. To get the inventory for balance sheet account, 0BALANCE can be filled in BW in den updating rules. For further information, see note 577644.
Or you can do full load
http://help.sap.com/saphelp_nw04/helpdata/en/5d/ac7d8082a27b438b026495593821b1/content.htm
Hope it Helps
Chetan
@CP..

Service Packs, Security Updates and Cumulative Updates

I would like to find a document that would help me understand and clarify Service Packs, Security Updates and Cumulative Updates versions and relationships.
Things like. Cumulative Updates include old Security Updates. Cumulative Updates do not overwrite applied Security Updates, etc.
For instance,
I am upgrading a server from: 10.0.5512 (SQL 2008 SP3, After Security Update MS12-70) To: 10.0.5861 (SQL 2008 SP3 CU17).
Would the MS12-70 (2754849) I installed still be present after installing CU17? The reason for doubt was that I saw another version of MS12-70 that includes
CU 1 to 7(KB2716435). So makes me wonder about it.
I am probably not able to explain myself right but, the idea is to find a document that can explain how the build information and versioning works.
Some how I have the idea that Cumulative updates would not include Security Updates.
Thanks beforehand
Paulino

Hi,
Below will give you list of Service packs and Cumulative updates for SQL Server
http://support.microsoft.com/kb/321185
http://sqlserverbuilds.blogspot.co.uk/
Security updates are for Windows not SQL Server. SQL server releases Cumulative updates after that a comprehensive service pack is released which includes all fixes that were done in Cumulative updates.
Cumulative updates fix only a certain type of problem(for which they are created) and should only be applied if facing issue
Service packs are more through and Inclusive and should be applied and contains many fixes and sometimes introduces few features as well. SP are more thoroughly tested as compared to CU For Cumulative
update from Microsoft:
We recommend that you test hotfixes before you deploy them in a production environment.
This cumulative package is intended to correct only the problems that are described in this article. Apply it only to systems that are experiencing these specific problems.
This cumulative update contains all the hotfixes and all the updates that were included with the previous SQL Server 2014 update release.
Windows patch has hardly any relation to SQL server SP and CU.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

Daily sales by month and cumulative sales for year

Hi Experts,
I have a reporting requirement where I have to show daily sales by month and cumulative daily sales for particular month for the year.
e.g. If the current month is January then my result shows fine. see below
Calendar Day
Net Sales
Target
Sales Year
Actual
Target
01/01/2014
100
90
01/01/2014
100
90
02/01/2014
200
180
02/01/2014
300
270
03/01/2014
300
290
03/01/2014
600
560
04/01/2014
400
350
04/01/2014
1000
910
But If I am in the month of Feb and I want to show sales for the month and cumulative sales for the year for just Feb but instead of showing cumulative total from 01/01/2014 to end of Feb it starts again at begining of Feb - See below
e.g.
Calendar Day
Net Sales
Target
Sales Year
Actual
Target
01/02/2014
200
190
01/02/2014
200
190
02/02/2014
400
380
02/02/2014
600
570
03/02/2014
600
590
03/02/2014
1200
1160
04/02/2014
800
750
04/02/2014
2000
1910
Expected Result - sales for the year shoud show cumulative result from 01/01/2014 - 31/12/2014
Calendar Day
Net Sales
Target
Sales Year
Actual
Target
01/02/2014
200
190
01/02/2014
1200
1100
02/02/2014
400
380
02/02/2014
1600
1480
03/02/2014
600
590
03/02/2014
2200
2070
04/02/2014
800
750
04/02/2014
3000
2820
How do I achive this?
please help.

What else you need?
looks like you got #working days for the month, use that metric as of jan 15th

Project mat. proc. report with monthly breakup and cumulative for year

Hi All,
can any body suggest a report for "Project material procurement report with monthly breakup and cumulative total for a financial year "
Thanks in Advance.
Regards,

Hi Ahmed,
Thank you very much for the response.
I am seeking the std sreport which can give the details for the project material consumption report with monthly breakup with the cumulative month total to year.
ex. jan 10 units , june -10 units , nov 10 units, total (year) =30
regards,

Is there a way to find out how much data was used over the lifetime of my phone (cumulative cellular and wifi)?

Is there a way to find out how much data was used over the lifetime of my phone (cumulative cellular and wifi)?
I was just curious

Given that the phone doesn't track how much data is used over WiFi, no. And cellular data usage can be reset.

Saxon and Supplied NodeList contains non-Saxon DOM Nodes error

Hi all,
I am writing an extension function for my xslt. So far, it was working fine, but since I switched from xalan to saxon, my function is giving me the following error:
Supplied NodeList contains non-Saxon DOM Nodes
I understand that I can not use non-saxon DOM nodes with saxon. The question is, how would I construct a saxon DOM objects???
my function looks like this:
public static NodeSet splitPortsAndResults(String portList, String resultList) {
// in here I am creating a document and node set to be returned to my xsl
I can not find any documentation on how to create a document using saxon.
I have spent a lot of time researching this. I would greatly appreciate any help.
Namrata

Dr. Clap,
Thanks again!!! I have been looking for this information for atleast two days. Wow! I have printed the pages that explain how to return NodeList. I will implement it on Monday or Tuesday and will let you know by Wednesday. It should be pretty straight forward.
Again, you are the best!!!
Namrata

Can I use ADF Logger in non-ADF applicaiton and outside container?

Hi all,
I want to use ADF Logger feature in non-ADF applicaiton and outside container. Is that possible?
Thanks,
Xianyi.Ye

I figured out "partially" the problem, I tried to overrid the create method, and for any reason the commit operation wasn´t working.
I was trying to set a value for a proprety, but it did not work as a wish.
My intention was.... when an user execute the form. one specific field brings a value.. however I cannot set default value. cause it´ll change sometimes.
it´s something like this
protected void create(AttributeList attributeList) {
super.create(attributeList);
setMyProperty(new Number(0));
do you know how can I figure out this problem?

Install the latest Service Pack and Cumulative Update

Hi Expert,
I am installing SAP on SQL SERVER 2008 R2. The database software installation is done,but as per
installation guide it is recommending to install "Service Pack and Cumulative Update" as SAP Notes 62988
Please suggest me if i donot install service pack then will it impact our installation?
Please relply ASAP.

Its always recommanded to have your database at patch level and cummulative update supported by SAP.
If you don't perform now then you have to take again downtime to perform this activity.
Regards,
Nikunj Thaker

Multiprovider containing non-cumulative KF and cumulative KF

Similar Messages

Maybe you are looking for