MultiProvider design CMP Warnings

Hello,
I'm trying to activate a MultiProvider using some infocubes including 0PA_C01 and 0PAOS_C01. When I check some warnings appears, among others:
Check of MultiProvider ZM:
Error messages from point of view of OLAP processor:
CMP problem occurred in characteristic [ZRUTA]Rutas for InfoProvider 0PAOS_C01
CMP problem occurred in characteristic [ZSTOR_LOC]Storage location for InfoProvider 0PAOS_C01
CMP problem occurred in characteristic [ZRUTA]Rutas for InfoProvider 0PA_C01
CMP problem occurred in characteristic [ZSTOR_LOC]Storage location for InfoProvider 0PA_C01
CMP problem occurred in characteristic [ZRUTA]Rutas for InfoProvider Z0PY_C02
as I can see it's because I'm using some characteristics that exists at some infocubes but not in the infocubes that originated warnings listed above. When trying to activate, Multiprovider activation is succesful, but when trying to retrieve info using Query Designer queries any info about involved infocubes is not available.
Has anyone experienced situations like this and what solution worked to fix it? what action(s) should I take into account?
Hope you could help me. Thanks a lot in advance.
Bernardo

Hi,
Our EDWH landscape was on SPS 13 earlier, for sreolving certain other issues SAP suggested us to with SPS 16 Upgrade. Post SPS Upgrade in our development system, when we tried to activate the Multiprovider we have faced this warnings of CMP( Common Multi Provider) mentioning about the Compounding Infoobjects.There has been no change the struture post SPS, but still we received this error messages, when contacted SAP for the same, it suggested to insert the values mentioned by Jose in RSADMIN table, which will convert the errors to warnings.
Even though the struture remained the same post SPS, these warnings are and added feature after SPS 13.
There is no problem after this data insertion in the RSADMIN table.
Regards,
Ganesh Thota.

Similar Messages

Multiprovider design (InfoObject assign) and query dehavior

Hi experts,
we have a hetergenous multiprovider, it has several InfoCube as the basis cube. when execute the query, it will display some duplicated records.
1) the two duplicated records are exactly the same, including characteristics, navigational atrribute, key figures.
2) the two duplicated records have the same characteristics, navigational attribute, with some of different key figures .
It's very hard to identify the root cause why for some of the records, it will have duplicated records. Meanwhile, I have some question for the multiprovider design..
For example, now we have 4 InfoCube..
In those 4 infoCube, we have the 0Material inside. at Multiprovider level, 0Plant are assign from those 4 infoCube
Only 3 of the InfoCube, have the 0Plant inside. at Multiprovider level, 0material are assign from those 3 infoCube.
1) what will happen , if I include 0plant and 0material as the rows in the query designer, will this cause some duplciated records ?
Now , 0Material, have the navigational attrribute, 0mateiral_0matl_type, If I only 3 Cube has the
0mateiral_0matl_type Open and assign into the Multiprovider..
In my query, I use the 0material, and also 0material_0matl_type as the variable , both could input the values, and display in the rows
What will happen ? if not all the navigational attribute are assigned at the Multiprovider level, but the master data InfoObject 0material it self are all assigned at the multiprovider level.
2 ) Is there any influence to retrieve the record ? I am not sure if 0Material are correctly assigned, 0material_matl_type will influence the result (number of records), or will this cause duplicate records ?
I think in some of the case, in the sub -cube, not all the required InfoObject, or navigational attribute are avalable at the ALL Cube level, but in the query level, they are used.
Finally, what could be the reason for duplicated records ?? they should be merged after execution..
Please share your comments. Thank you very much.
Best Regards,
muwenziwu

HI muwenziwu,
If you iunclude any characteristics or a navigational attribute which is not common in both the infoproviders
then the it will show the result in a seperate line ,
But you have a option to overcome this , refer the How to document in the below link
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/70dcd7b5-6a3d-2d10-c984-e835e37071a2
Hope this helps
Regards,
Sathya

Multiprovider design -problem

I am just creating the multiprovider on Custom Billing cube and Custom DSO .
In my billing cube , I have Billing document assigned to line item dimension
and Line item is also in another in another line item diemsion .
My DSO have Billing document number , Item number and Partner function as primary key .
Could you please let me know how should be my MP design ?
How to create a dimension in Multiprovider ?
Can I assign the Billing document from cube and Billing document from DSO to the same diemsion ?
How to figure out the Partner function Characterstic of DSO which is primary key of DSO but not having this fields in billing cube . ?
There are 2 other data fields available in DSO which is not there in Billing cube , Do i hv to create a new dimension for them ?
Please help me soon .
Regards

Can I assign the Billing document from cube and Billing document from DSO to the same diemsion ?
You can create a single dimension for this, in that you can use Billing document and right click assign/identify from the both DSO/Cube.
How to figure out the Partner function Characterstic of DSO which is primary key of DSO but not having this fields in billing cube . ?
Create separate dimension for these Partner function Characterisitcs
There are 2 other data fields available in DSO which is not there in Billing cube , Do i hv to create a new dimension for them ?
If those data fields related to Billing Document, then you can add these two fields to fisrt dimension (Billing Document Dimension).
Hope you get some idea.
Veerendra.

Multiprovider design between characterstics and KF

Hi Experts
I have 2 MP , i have to design new MP using these 2MP.
I have to integrate these 2 MP, here challenging key point is:
I have to integrate between characteristics of 1st MP to KF of 2nd MP, But there are some common characteristics between these two MP's, Can Any experts give suggestion on this design.
Thanks in Advance

Hi Meena,
If your data from ODS is not available in Multiprovider then there can be following three cases:
1> Data is not activated in ODS
2> Data is acitvated in ODS but you have not provided characteristic identification from ODS in multiprovider
3> THe Calendar Day for which you want to see the data from Multiprovider; you may not have any data for that calendar day in your ODS.
Please check this and let us know if there are any issues.
Regards,
Nilima Rodrigues

Multiprovider design

dear all,
The dimension design of infocube are important for performance and each dimension will link to some master data and SID id.
but is this concept still true for a multiprovider? thanks.

Hello,
Check this Thread:
Analysis and Performance tuning of a query
u2022 When the reporting scenario is to be extended, use a MultiProvider as central interface between
query definition and basic InfoProviders. When another InfoProvider is added to the MultiProvider
definition, the technical name of a query based on the MultiProvider remains unchanged.
u2022 Use a MultiProvider to reduce the size of the basic InfoProviders. Advantages: parallel access to
underlying basic InfoProviders, load balancing, resource utilization, query pruning.
u2022 Make sure that your MultiProvider only retrieves data from relevant basic InfoProviders at query
runtime by
o Using constants in the design of the basic InfoProviders
o Using different key figures in the design of the basic InfoProviders
o Using characteristic 0INFOPROV when designing a query on the MultiProvider
u2022 Are you planning to use a MultiProvider? If so, you have to ensure that the characteristics you want
to report exist in all basic InfoProviders.
u2022 Do not use more than one non-cumulative InfoCube (InfoCube with at least one non-cumulative key
figure) because this could lead to incorrect query results.
u2022 Do not use calculations before aggregation on MultiProvider because this may lead to wrong query
results.
u2022 Do not combine basic InfoProviders having inhomogeneous data models in a MultiProvider. Use the
report-report interface between queries defined on the basic InfoProvider instead.
u2022 Avoid using only parts of compound characteristics in the constituent basic InfoProvider of a
MultiProvider. For more information, see SAP note 702542.
Assign points if this helps,
Regards,
Jorge Diogo

How to view all designer resource warnings?

We have hundreds of dialogs in XAML.
When we make a global resource change,
it can break the resource links in the XAML.
When we open the XAML view in VisualStudio 2012's designer,
it show these broken links as resource warnings:
"Warning 43 The resource "XamSliderNumericThumbStyle" could not be resolved."
Is there some way to view all of the designer warnings without manually opening up each dialog?

Don't you get warnings when you compile?
Or even just open the solution.
You can CTRl+A, Ctrl+C all errors and warnings out the Error window.
Paste into excel.
No good?
Never tried it for this specifically but you can use msbuild from a bat file.
There's an option to send warnings to a separate file.
(I use this with errors usually for server builds.)
You can do:
msbuild MyProject.proj /t:go /fl1 /fl2 /fl3
/flp2:logfile=JustErrors.log;errorsonly
/flp3:logfile=JustWarnings.log;warningsonly
https://msdn.microsoft.com/en-us/library/ms171470.aspx
That'll output warnings to a separate log file.
You can adjust verbosity.
https://msdn.microsoft.com/en-us/library/ms164311.aspx
Hope that helps.
Recent Technet articles:
Property List Editing ;
Dynamic XAML

Question about the dimensions of a multiprovider

Hi all,
I need to create a multiprovider based on 2 infocubes. They have 22 dimensions altogether, without taking the default ones in account.
I'm able to group 6 dimensions into 2 because they have characteristics in common, but after this action there will still be 16 dimensions.
My question is: is there any problem in putting unrelated dimensions together? Would there be some problem related to the multiprovider design?
Thanks and regards,
Tiago.

HI,
This mainly depends on the reporting requirements you have. If you want to do better on the reporting performance since the requirement is on the two cube with more number of characteristics. While design the cube take only those char which are useful for reporting. Group the char in dimension as per the reportign requirements like the two char collectively used in a query can be used in one dimension.
assigning dimensions in a multiprovider
Use of Dimensions in Multiprovider?
http://help.sap.com/saphelp_nw70/helpdata/en/52/1ddc37a3f57a07e10000009b38f889/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/cf/bc734190ba137de10000000a155106/frameset.htm
Tarak

Delivery Quantity not Populating in Multiprovider

Hi
I created a Multiprovider on ORDER and DELIVERY cubes, and created a QUERY on this Multipartite. In the QUERY OUT put I am not able to get the DELIVERY QUANTITY where as I am able to get ORDER QUANTITY. but iam able to get both in the LISTCUBE of MULTIPROVIDER.
Please help in this regard
Thanks
BHANU

Bhanuprakash,
Just try listing out characteristics from both cubes in your query , if they come out matched with each other , then your multiprovider is working right , else it means that the multiprovider design should be relooked.
Arun

Steps to create Multiprovider and infosets..

Hi gurus,
Can anyone post me steps to create multiprovider and infosets..
Points will be awarded.
Thanks in advance,
Venkatesh

A MultiProvider is a type of InfoProvider that combines data from a number of InfoProviders and makes it available for analysis purposes.
The MultiProviders itself does not contain any data. Its data comes entirely from the InfoProviders on which it is based. MultiProviders only exist as a logical definition. These InfoProviders are connected to one another by a union operation.
One can combine InfoCube, ODS objects, InfoObjects and InfoSets in a MultiProvider.
A union operation is used to combine the data from these objects into a MultiProvider.
Here, the system constructs the union set of the data sets involved. In other words, all values of these data sets are combined.
InfoSets allows reporting on several InfoProviders by using combinations of InfoObjects (master data-bearing characteristics) and ODS objects via a join condition.
An InfoSet can have following join conditions
Inner Join
Left Outer Join
Inner join and left outer join are only different in the situation where one of the involved tables does not contain any suitable record which meets the join conditions.
steps for creatin multiprovider.
Step1: Enter Transaction RSA1. Right Click on Infoarea and select u2018Create MultiProvideru2019. Provide technical name and description for the MultiProvider.
Step2: Select Data Targets (InfoCube, ODS and InfoObject or Infosets) on which MultiProvider should be based.
Step3: Select the Characteristics which should be part of the MultiProvider design.
Step4: Select Time Characteristics and Key figures.
Step5: Create dimensions and assign the characteristics to the dimensions.
Step6: Identify the characteristics, time characteristics and key figures in u2018Identificationu2019 tab.
Step7: Save and Activate the MultiProvider.
steps for creating infoset.
Step1: Enter Transaction RSA1. Right Click on InfoArea and select u2018Create InfoSetu2019. Provide technical name and description for the InfoSet.
Step2: Choose ODS or InfoObject on which you want to build InfoSet.
Step3: Select the characteristics/key figures required in InfoSet design and join the common characteristics via Inner or Left Outer Join.
Step 4: Save and Activate InfoSet.
hope this helps you in creating them...

Query performance on Multiprovider(Remote Cube)

Hi All,
I have to increase the query performance for a report which built on Multi provider.
This multiprovide designed from several remote cubes,but for this report data will bring through one remote cube from R/3.
In filter i had one remote cube, which bring data from R/3.
Now in ST03 the stats are like
%init Time - 0, %DB time - 0, %OLAP time - 16.67, %Front end - 83.33.
Now i have to improve the %Front end lapsed time.
Could you please guide me.
Thanks
Srinivas

Hi Srinivas,
Please see this document
https://websmp105.sap-ag.de/~sapidb/011000358700001394912002
And this Discussion Thread
Re: Deactivate Hierarchy symbols in excel
See whether this is helpful in case of Remote Cubes.
Thanks
CK

Designer 9.0.2.7 - problems with capturing PL/SQL packages

Hello,
I would appreciate any help regarding the following issue:
We tried to capture in Designer 9.0.2.7 the existing PL/SQL packages from an Oracle 9i database and we have met some problems.
Even the package has a body containing two public procedures, when capturing, the Designer generates warnings that say the PL/SQL package body is empty. Therefore, the Designer capture the body content and write it in the PL/SQL Block of the PL/SQL Definition property, but the content of the body is preceded with the " character.
This makes problem when generating the "ddl" for the package (the package is not created correctly in the DB).
In addition, when generating the "ddl", the "END package_name" is added twice.
Other problem is that the package specification information from Designer is just "END package_name;"
For some of the packages containing only a list of public procedures, without any other variables declarations, the Designer does not capture these procedures as separate subprograms in the package definition, as it does other times. In this case, the package body is entirely captured in the PL/SQL Block and with the " character before content.
Is it some settings that can be done or some rules about the format of the PL/SQL procedures in order for Designer to capture all packages in same manner and correctly?
Thank you,
Claudia

Hi Keith,
I am connecting to the database as the package owner..
I have noticed earlier that I have problems when capturing triggers also.. The content of one large trigger contains 36371 characters and when capturing it from DB, the content was truncated to 28020 characters in Designer.
Our ideas with capturing the DB packages/procedures were to use the Designer as version control system.
We wanted to have all objects used in a project in Designer.. entities, tables, triggers, packages, procedures, Forms files, etc. in order to make a configuration for a project release.
Thank you,
Claudia

Create form in SFP

Hi,
We are trying to created a Form in SFP, then we wrote some java script in it, but it is not executing the java script as expected. please let me know, if any one have clue? please tell me step by step...
Any settings we need to do on ADS server??
ADS connection is fine, RFC connection also good..no issues ADS configuration check
Thanks & Regards
Jay

Hi Jay,
try to execute javaScript from client(right upper corner) or start Designer in Offline modus (Mostly: C:\Program Files\Adobe\Adone Designer 7.X)
There is an additional windows within the designer called: "Warnings" Is there anything listed?
Best
Carsten

Multi provider report

HI experts
im reporting on a multi provider, i have key figures in columns invoice and tax, when i take 1-rowcount in column im not getting facts for the key figures, can u suggest how to resolve.? without 1-row count im getting facts for the key figures in reporting,
Thanks in advance

I think there may be some problem with key figure assignment of different source infoprovider in you multiprovider. filter you query result for each source infor provider and check the result. 1ROWCOUNT only available in DSO so in multiprovider if you have taken DSO and cube both than 1ROWCOUNT will not be ther against cube characteristic. Kindly share your multiprovider design and key figure mapping.
Manish

New key figures in multiprovider not visible in query designer

Dear Experts,
I added a cube and keyfigures to the multiprovider definition.
The multiprovider is activated successfully.
The added keyfigures come only from this new cube.
I identified these new keyfigures to this new cube only.
There is an existing query based on old version of the multiprovider without the new cube.
When i relaunch query designer and re-open this query, i could not see the new keyfigures.
When i create a new query, also its not showing the new keyfigures.
Is there something not refreshed that I do not see these new key figures?
Kindly advise. Thank you!
Best regards
Bass

Hi,
Some time it happens that newly added key figures and characteristics are not visible immediately in Bex query designer. Just check for warnings if any encountered while activating else try editing and re activating your Multiprovider and also proper field assignment.
Newly added Key Figures should be visible in both New and Old queries without any differentiation. Just log off and log in back after some time, there is a good possibility that this inconsistency would be resolved.
Regards
Raj Rai

Design issue with the multiprovider

Design issue with the multiprovider :
I have the following problem when using my multiprovider.
The data flow is like this. I have the info-objects IobjectA, IobjectB, IobjectCin my Cube.(Source for this data is s-systemA)
And from another s-system I am also loading the masterdata for IobjectA
Now I have created the multiprovider based on the cube and IobjectA.
However, surprisingly join in not workign in multiprovider correctly.
Scenario :
Record from the Cube.
IObjectA= 1AAA
IObjectB = 2BBB
IObjectC = 3CCC
Records from IobjectA =1AAA.
I expect the record should be like this :
IObjectA : IObjectB: IObjectC
1AAA       :2BBB       :3CCC
However, I am getting the record like this:
IObjectA : IObjectB: IObjectC
1AAA       :2BBB       :3CCC
1AAA         : #             :#
In the Identification section I have selected both the entries for IobjectA still I am getting this error.
My BW Version is 3.0B and the SP is 31.
Thanks in advance for your suggestion.

May be I was not clear enough in my first explanation, Let me try again to explain my scenario:
My Expectation from Multi Provider is :
IObjectA
1AAA
(From InfoObject)
Union
IObjectA     IObjectB     IObjectC
1AAA     2BBB     3CCC
(From Cube)
The record in the multiprovider should be :
IObjectA     IObjectB     IObjectC
1AAA     2BBB     3CCC
Because, this is what the Union says .. and the Definition of the multiprovider also says the same thing :
http://help.sap.com/saphelp_bw30b/helpdata/EN/ad/6b023b6069d22ee10000000a11402f/frameset.htm
Do you still think this is how the behaviour of the multiprovider.. if that is the case what would be the purpose of having an infoobject in the multiprovider.
Thank you very much in advance for your responses.
Best Regards.,
Praveen.

MultiProvider design CMP Warnings

Similar Messages

Maybe you are looking for