Multiprovider display data issue

Hello,
I'm using BI7.0 and created Multiprovider using Custom DSO and Infocube1.
the problem is, when i use display data through multiprovider, I'm not able to see data from DSO .
I have considered all common fields from DSO and Cube and assigned in multiprovider.
basically I'm selecting all IO and Keyfigures from Infocube1 and few IO from DSO
some reason I am not able to see data from DSO when i view data through multi provider.
Please help me to view data from both cube and dso through multi provider.
Thanks
Ganga

Hi Ganga,
Please check whether there is any restrictions for the field 0PROVIDER. There may be restriction to get the data only from cube.
If there is no any restrictions then here may be your problem.
You need to maintain atleast one key figure in both targets.
Since there is no any key fig coming from DSO
please create a dummy key fig and try to check once again.
please go through the link.
Re: MULTIPROVIDER NOT GETTING DATA
hope this helps u.
Thanks,
Sai Chand

Similar Messages

HANA Analytical View Display Data Issue

SAP Experts,
Need your kind help for the below issue,
I've created an analytical view from a DSO Active Table in HANA Studio. Through IDT (Information Design Tool), when I tried to view the contents of this DSO table (AYPURDA0100) by connecting to HANA, I see the following error which is mentioned below,
Error:
Error while refreshing the data provider.
Cause of Error:
SAP AGSDBODBC DLLHDB General error;7 feature not supported: cannot execute select * on olap cube: zthd/AYPURDA0100: line 1 col 26 (at pos
Note: The AYPURDA0100 table contents are displayed in HANA Studio. However when a view was created with NO join conditions for the same table with few selected fields including measures, the display data is not working.
Your views are greatly appreciated. Thank You in advance

Check out the comments from Marc and Lars in the thread below.
http://forums.sdn.sap.com/thread.jspa?forumID=491&threadID=2138937

Issue in multiprovider/query data

Hi all,
I'm seeing an issue with my data in multiprovider/query which I cannot understand.
I have a multiprovider with a cube. I'm able to see data in the cube with a certain restriction but when I put the same restriction in the multiprovider I'm not able to see the data. I have a query with the same restriction as well and there too the results are not showing.
I have checked the assignment in the multiprovider and it is correctly assigned i.e. from the cube from where I want the data.
When I tried to display data in the multiprovider without any key figures selected then the data shows up correctly. Why is this happening and what can I do to fix this?
Thanks

Hi,
First check report data by using 0infoprov iobj in multi provider and restrict with cube . check either you are getting same data or not as cube including kfg's.
able to see data in the cube with a certain restriction : what type of restriction's applied if possible give detail.
Thanks.

Authorization issue when I display data from ODS, Infocube, Multirprovider

Hi Experts,
When I'm trying to display data for ODS, Infocube, Multiprovider, Infoset in production system, facing aurhorization issue.
Can anybody have idea what is authorization objects to display data from Infoproviders.
SIRI

Check for below authoriztions in your role:
S_RS_ICUBE
ACTVT          03
RSICUBEOBJ     AGGREGATE, CHAVLREL, DATA, DATASLICE,   DEFINITION, EXPORTISRC, UPDATERULE
RSINFOAREA     *
RSINFOCUBE     <your cubes>
S_RS_ODSO
ACTVT          03
RSINFOAREA     *
RSODSOBJ     <your DSOs>
RSODSPART     DATA, DEFINITION

Issue with display data from infoset

Dear Experts,
When I am trying to display data from BI INFOSET in (Execute in background ctrl+F2)backend it is working fine but when in try to run the execution in forground (execute F8) then the system gets hang.. and time out. could any one has this kind of experience. if so kindly let me know do i need to implement any patch or else which way i can do work to resolve this issue.
Thanks in advance.
Mannu

Hi Krishna,
I have tried as you have suggested ie. using Tcode RSISET for displaying data but still i have the same issue.
Could any one post any additional suggestions to follow.
Thanks in advance,
Mannu

Display data problem in MP

Hi all,
        Infoset is included in multiprovider. There is a keyfigure which has 0calyear in exception aggregation.Infoset is displaying without any error. 0CALyear is already present in Multiprovider.
What could be the reason to display that error message.
          When I am trying to display data of multiprovider, it is showing following msg   InfoProvider "ZINFOMP" does not contain characteristic 0CALYEAR. The exception aggregation for
keyfigure can therefore not be applied.
Thanks in advance!

hi vivek,
   plz go through the link and maintain the settings.
further issue on this,try to revert it back.
https://websmp203.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=012006153200001735542002
regards,
meiy

Report not displaying data from one of the infoproviders

Hi Experts,
Issue: Report not displaying data from one of the infoproviders
I have a report 'ReportA' which has multiprovider MP1 as the source.
MP1 has two Infocubes IC1, IC2 in its design.
Now, when i execute the report, data from IC1 is displayed. But no data from IC2 is displayed.
Is there a setting i need to enable in MP1 ? or is there anything else that needs to be enabled ?
Please reply.
Regards,
Suraj S Nair

Hi All,
When i display data directly from the multi provider, without any restrictions, i cannot view the data from infocube IC2.
I feel its not an issue with the Query. It must be a problem with the setting in the Multiprovider MP1.
Infocube IC2 is a copy of Infocube IC1. Multiprovider MP1 first only had IC1 in its design. It was recently IC2 was also included.
I checked the Characteristics, all of them are assigned corectly.
Now, this issue sure has something to do wiht the setting of Multiprovider or please correct me if wrong.
Regards,
Suraj S Nair

Master data Issue --- materials have unassigned or # values ...!!

Hello Experts,
I am facing an issue that the Customer Data is missing in a BEx Report.
Data Flow is 2LIS_13_VDITM --> DSO1 --> Merging DSO --> Cube --> Multiprovider --> Bex Report.
Exact issue is Customers in the Bex Report has unassigned to Sales Office, Sales Group, Sales District.
The only reason a customer should show up under u201Cunassignedu201D or u201C#u201D is if itu2019s improperly set up in the system.
customers are assigned with two values. one which has data and the other which has unassigned value.
I wanted to know, how do i check if the matierials are valid to have unassigned Values ?
Checked the Merging DSO and saw that there are actually values assigned values for the affected matierials.
After that checked the Cube data values are displayed except the Master Data values.
I guess..its completely related to Master data. I would like to know how can i resolve this issue.
Please reply me if you face this kind of master data issue in your expeiriance.
Thanks,
SN.

Hi,
Are Sales Office, Sales Group, Sales District are attributes of Customer?
In case they are, then the customers will be unassigned to Sales Office, Sales Group, Sales District in case the data for these attributes is loaded to the customer attributes.
and also check if the customer characteristic is properly assigned in the multiprovider.
Check if it helps.
Regards,
Joe

Short dump MESSAGE_TYPE_X in displaying data from BPC Virtualcube

Hi Experts,
I am experiencing an error when try to display data from a BPC VirtualProvider Infocube (both from Workbench and with LISTCUBE transaction).
This kind of virtualcube is auto generated by BPC.
When I do some kind of selection I obtain this error: MESSAGE_TYPE_X
Short text of error message:
System error in program SAPLRRK0 and form CHECK_KHANDLE (see long text)
Technical information about the message:
Message class....... "BRAIN"
Number.............. 299
Variable 1.......... "SAPLRRK0"
Variable 2.......... "CHECK_KHANDLE"
I have another BPC vitualprovider and this doesnu2019t happen.
I would use this cube inside a multiprovider, that has a BI cube too, and get the data through a BEx query. But the query throws the error and stopped.
I know that there could be problems with BPC structures (i.e. changes in tech name when transporting it), but at the moment I donu2019t see other solution to compare BI to BPC data.
I went through other posts in sdn forum for this issue, but I am not able to get the exact solution,
please help
Thanks,
Marco
System version:
BW: 701 level 0007
BPC: 750 level 0005

Hi Lokesh,
I read the note you have indicated.
For the first note 1479393: I donu2019t have hierarchies and the error appears in a different program to what is indicated in the note. This is where terminated:
Termination occurred in the ABAP program "SAPLRRK0" - in "CHECK_KHANDLE".
The main program was "GP4LQ7N6RS4RUB6HA69UREYGPKB ".
In the source code you have the termination point in line 34
of the (Include) program "LRRK0F05".
Furthermore, there are no calculated measures nor members in the MDX statement, because I just try to display the data from the virtualcube.
For the second 1448691: yes, it could be a performance related problem. Indeed, when I apply stronger filters, the error doesnu2019t occur and I got the data. But the system is already patched to SAPKW70107.
So, do you have any other ideas?
Thanks,
Marco

Query not displaying data

Hello BW experts,
I am having an issue where in my query is not displaying data even though there is data in the cube in production.
But the same query is displaying data for the same selection in QA system.
I have executed the tests in RSRT, but am not able to find anything.
Please give your valuable inputs.
Thanks in Advance
BW learner

Hi,
Check the filters of your query, Is there any selection made where you are going to get only march data which is present in your production system.
Check the info cube data by giving the same filter values as in the query definitation. If you didnt find any data, then your query is working fine.
check this and let me know...
if you find some data in the cube with the same filter selection, then give me the data flow of your query, which means, whether the query is executed on Multiprovider or cube?
Regards,
Patil.

Display Data Flow - Short Dump

Hi all,
When i select display data flow of any cube...it is going for a short dump.
I have searched for the answer in previous Forum questions. I could find only for previous BW versions but not for for BI7.
Could you please let me know the solution for this issue.
Thanks & Regards,
Eswari

Hi All,
Thank you very much for all of your responces.....
I am working on Support Package 10.
Here is the detailed description of the short dump.
Short text
    The current application triggered a termination with a short dump.
What happened?
    The current application program detected a situation which really
    should not occur. Therefore, a termination with a short dump was
    triggered on purpose by the key word MESSAGE (type X).
What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
    Short text of error message:
    GP: Control Framework returned an error; contact system administrator
    Long text of error message:
     Diagnosis
         The Graphical Framework is based on the basis technology known as
         the Control Framework. A method in the Control Framework returned
         an error.
     Procedure
         It probably involves a programming error. You should contact your
         system administrator.
     Procedure for System Administration
         Check the programming of the graphics proxy especially for the
         parameters that were sent and, if necessary, correct your program.
    Technical information about the message:
    Message class....... "APPLG"
    Number.............. 229
    Variable 1.......... " "
    Variable 2.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "MESSAGE_TYPE_X" " "
    "CL_AWB_OBJECT_NET_SAPGUI======CP" or "CL_AWB_OBJECT_NET_SAPGUI======CM005"
    "PBO"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
   4. Details about the conditions under which the error occurred or which
   actions and input led to the error.
Thanks,
Eswari.

Display data from CSV file in iWeb page

Hi,
I like to display data from a CSV file in iWeb page if a date value from CSV file matches todays value from the system. Here is an example.
CSV data values
01/20/2011,Sunny,87
01/21/2011,Cloudy,100
01/22/2011,Rainy,60
If today's date value is 01/21/2011 the page should display 01/21/2011 Cloudy 100 in a tabular format.
Appreciate your help in providing HTML code for this issue.
Thanks

I suspect there is a soft return in the excel database somewhere that can't be seen. Take the csv/txt file into notepad and look for a line that starts oddly compared to the others.
I haven't had luck removing soft returns from excel files so I do this a rather odd way. I take the excel file into InDesign as a table, and then use find/change to replace any soft returns with nothing, then convert the text to table and then export the text out again by going export, and selecting text from the dropdown menu.
For my money, I always save tab delimited text files from excel so that if a field does contain commas, it doesn't "trick" indesign into thinking a new field is beginning or not... instead the field delimiters are tabs and they are unlikely to have been used in the excel database.
If you do choose to use this indesign import method of mine to clean up the database, i also noticed two things in your screengrab: first was that some fields have spaces at the start of the text... easy enough to fix with a GREP that looks for ^\s (start of a sentence followed by a space) and replace with nothing. The second thing is the T&C field that all entries (at least in the screengrab) all start the same – if all entries in the database start the same, couldn't that line be in the indesign file? Its only a small detail I know.

Display data in diagonally in table using XML publisher

Hi,
I need to display data of the invoice which contains columns ( invoice_number,receipt_number,amount,quantity)
where i need to dispay amount and quantity diagonally for the invoces i.e. the data will extend dynamically.
please give me an idea to resolve this issue.
Thanks in advance

in wdinit(),
Collection col = new ArrayList();
try{
MyCommandBean bean = new MyCommandBean();
col = bean.getDataFromDbViaEJB();
wdContext.nodeMyCommandBean().bind(col);
} catch (Exception ex) {
   ex.printStackTrace(ex);
in your JavaBean model class, MyCommandBean getDatafromDbViaEJB() method:
Collection col = new ArrayList();
Collection newcol = new ArrayList();
//include your own context initialization etc...
col = local.getDataViaSessionBean(param);
// if your returned result also a bean class, reassigned it to current MyCommandBean
for (Iterator iterator = col.iterator(); iterator.hasNext();) {
    MyOtherBean otherBean=(MyOtherBean)iterator.next();
    MyCommmandBean bean = new MyCommandBean();
    bean.attribute1 = outBean.getAttirbute1();
    // get other attibutes
    newcol.add(bean);
return newcol;

Display data of query in Analysis Process Designer mismatch query result

Hi experts,
I am having an issue with APD.when ii am display data of the query in apd i am having wrong values for key figures.
any solutions?
Thanks

Hi,
after doing a check by restricting data in the query, I see that the condition I have set in the query, to only give me the data where keyfigure X <= 2, the DSO is updated with all the values. So it seems that conditions in queries are ignored by the APD. Does anybody know anything more about this? Then I can understand why the job was taking so much time...
Regards,
Øystein

Display data problem

Hi all,
Infoset is included in multiprovider. There is a keyfigure which has 0calyear in exception aggregation.Infoset is displaying without any error. 0CALyear is already present in Multiprovider.
When I am trying to display data of multiprovider, it is showing following msg InfoProvider "ZINFOMP" does not contain characteristic 0CALYEAR. The exception aggregation for
keyfigure can therefore not be applied.But when I create a query on multiprovider,it is showing data properly.
What could be the reason to display that error message.

Change your query to display both Infoprovider & CalYear. Retry.

Multiprovider display data issue

Similar Messages

Maybe you are looking for