Multiprovider: Info object not available
Hello Experts,
When iam creating a MP, unable to find Info Object in the selection screen.
IO is activated and also done "Generate Export Data Source"
plz help.
KV
Hi KV,
Just a thought, if you are refering to navigational InfoObjects and you do not see it available in the Multiprovider/Infocubes it is most likey maked as an 'attribute only' infoobject.
to make availble in Infoprovider uncheck this on the InfoObject.
regards,
CH
Similar Messages
-
SU24 - Search by Auth object returns "Authorization object not available"
If I try to select by Authorization Object :
F_CLOS_BKA
or
M_MATE_DG
I got "Authorization object not available" error
I can't find F_CLOS_BKA and M_MATE_DG in the TOBJ table as well.
But if I select by Transaction :
F975
or
DGR3
It display
F_CLOS_BKA CHECK YS
M_MATE_DG CHECK YS
Question : Is this Normal?Hi Dominick,
I recommend to open a ticket at SAP to clarify that....
The correct components should be:
F975-->IS-B-BCA-PT-GLP
DGR3-->EHS-DGP
I suggest to ask them (as they are responsible for delivering the values for SU22) why the deliver proposals for
objects, which do not exist (I have found note #1170774 for F_CLOS_BKA (but this note is 'brand new'), M_MATE_DG seems not to be delivered at all).
It would be nice, if you would post the result of your queries...
thx,
B.rgds,
Bernhard -
Urgent: Linked object not available
We imported one role from one EP7 (DEV) into another EP7 (QAS).
At target QAS PCD, we see the role has a path:
pcd:portal_content/com.sap.portal.migrated/SAPComponentSystems/roles/DEVCLIENT10/ROLE1.
1) We changed above path to:
pcd:portal_content/com.sap.portal.migrated/SAPComponentSystems/roles/QASCLIENT10/ROLE1;
2) We made sure EP7 QASCLIENT10 is connected to the backend well;
3) the backend QAS/10 indeed has the role called ROLE1.
But we still see on PCD, this imported role (ROLE1) has no any transaction. It shows a lot of "linked object not available".
I remember a place to activate it but anyway cannot figure out.
Please advise. Points guaranteed. Regards.Greg,
I am quoting from SAP Help regarding the folder where the role uploaded objects should be stored.
<i>The folder in which the objects are stored after the upload is defined in service com.sap.portal.pcd.rolemigration. The path portal_content/com.sap.portal.migrated/SAPComponentSystems/ is entered as default value. You can also define a different path in the service.
The default folder can be found in the Portal Catalog under Portal Content -> Migrated Content -> SAPComponentSystems. You find further sub-folders that are created automatically with the upload below folder SAPComponentSystems. The objects uploaded from the backend systems are automatically sorted according to the following criteria in this folder: by the portal object type to which they are converted and by the logical system from which they are uploaded.</i>
You can check what path you have in your portal under the service com.sap.portal.pcd.rolemigration from System Admin -> System Config -> Service Config -> Applications. There you should find the location where your objects should be stored.
get the complete documentation <a href="http://help.sap.com/saphelp_nw04/helpdata/en/d1/95584035a0987ee10000000a1550b0/content.htm">Here</a>
Regards,
Shubhadip -
HT5312 Forgot your answers? Send reset security info email not available?
send reset security info email not available plese help me how can reset security question if not available.
If you forgot the answers to your security questions and don't have a rescue address with which to reset them, you need to contact Apple's Account Security team for assistance.
You can speak to an Account Security Advisor by calling AppleCare technical support. To find the right contact option for your country, see this article:
Contacting Apple about your Apple ID account security
http://support.apple.com/kb/HE131 -
Package Linked Smart Objects not available
Hello,
I have Photoshop CC on my pc and Windows 8.
File > Package is not available...
Can anybody help me!It is missing from the menu. I tried to save the file as tiff or psd, but no Package...
I've attached a printscreen from the menu, the language is Dutch, I put an elipse on the smart object options. -
Info Object not visible in Dimension Reporting
Hallo,
I've created a multi provider which includes 2 infocubes.
I added a new Infoobject to 1 of the cubes and added it into the Identification and also to the Dimensions of the Multi.
Strangely, when I create a query, the Info-object is not shown into the dimension.
Any suggestions?
Regards,
KurtCheck if the multirovider is active or not and also the infocube. Again check the identification. if every thing is fine, just logout of the system and login again.
-
Info Object Not seen in the catalog
BW experts,
I installed the infoObject 0SHIPPTYP from the Business content. But I am not able to see this in the info object catalog. Can anybody tell me if there is something to be done?
Thanks
AshwinThanks Bhanu, But no, it has not gone to the unassigned node. Bhanu I remember there was some function module to run in case of these scenarios (i.e when you install objects from Business content and they dont appear in RSA1)....I dont remember what it was......do you or anybody know this?
Thanks
Ashwin -
Server Admin iCal Overview shows info as "Not Available"
Next to each topic (Accounts, Calendars, Groups, Locations, Resources, Events & Todo Lists) Server Admin displays "Not Available". The iCal server is running and users are interacting with it OK. The disk usage is 0.0B, there are about 10,000 events.
Since this happened there have been problems accessing calendars via the web (hardly used so not sure what others are seeing).
I've checked & fixed the POSIX permissions for the /Library/CalendarServer hierarchy. I tried deleting the .db.sqlite files & letting iCal repopulate them.
All the settings are intact and haven't changed. The logs show no culprit entries, just the usual. /etc/caldavd/caldavd.plist does not appear to be corrupted.
Ideas?A hard drive started having RAID errors around 5/1, so the server is being rebuilt from scratch.
I'm still curious if anyone knows the how & why of this issue. -
Info object not found at query level
Dear Experts,
I have a issue in concern of Query dsigner. I have designed a query on the basis of ODS & i is working fine on dev system. Then i transport the same query on the QAS system, when i executed the same on QAS syste, it gives an error Characteristic BAS: Place Name was not found in InfoProvider when I analyse the same i found that the query is not able to find one field. then I check the same field in ODS, but the field is available in ODS. I am not able to find out the solution or other way that why this type of error is coming.
I also re transport all the things but still getting the same error.
thanks in advance
NehaHi Neha,
Try re-importing(with overwrite mode) the query once in QA and if the error still persists, collect the query once again and transport it to QA.
I'm saying this because you have made enough checks at all levels, hence try this option.
if structure of the DSO's in both the systems are identical and if you transport the query once again...the error should be fixed.
if the structures are not indentical or any of the objects are inactive then you may face the problem. consider all these things before collecting the query.
Regards,
Sudheer. -
help
With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
Create Object - Mappin Object not available in ESB
Hi,
strange behavior:
One of our users can´t create new mapping objects.
While clicking the Create Objects button in ESB the pop-up is openening, but without the Mapping Objects entry.
The user has sufficient authorizations:
All "XI" roles are assigned.
Any ideas?
Thanks in advance,
AndréWhile clicking the Create Objects button in ESB the pop-up is openening, but without the Mapping Objects entry.
can be because of the Application Profile selected for this user....check with Unrestricted view.....if a custom profile was build for this user then contact the system admin for the same. -
Audible book info/description not available? on the iTouch?
I've downloaded Audible books thru iTunes to my Touch. The books are in the Audiobook tab in iTunes. 1) Where is the description for the book? 2) Can I sort the books by Author?
Have you looked at the support page for this app?
http://audible.custhelp.com/app/answers/detail/a_id/3971 -
Hi,
I am facing strange issue. we have one iview and it assigned to one. this link(role-->i view) is working fine from longtime.
but last week onwards for some users(they have access) this iview disappearing some time and appearing some time.
when i verify in the content admin i was able to see the link ,(in the role also). then i cleared cache ,and then when i verify in the content admin i was not able to see the link . and in the role i am seeing as ' linked object not available" .
please let me know why this happend is there any note available to resolve this.
Thanks
SuryaHi,
I assume you have enabled the Connector for Caching Roles.
Please Check the Property of the iView under the Property Category : Navigation >> "Metadata for the Navigation Hierarchy".
Ensure that the Property is set to "Cacheable".
Also Synchronize Cache for the Connector under System Administration >> Navigation >> Navigation Cache.
Kind Regards,
Mrityunjay. -
Hello Experts, when i replicate a COPA DS to BI7.0 i got the message that some objects r not in active version.But when i tried to search them in BI-CONTENT for activation ....i couldn't find them......r all objects not available in BI-CONTENT ....if so do need to customize a relevant object eg: ZCURTYPE....what is the best solution
Check the Object status M or A..and simply activate the IO and collect in a transport and then replicate the data sourceu2026
-
Info-Object data not appearing in Multiprovider
Guys,
I got a problem here. I have created a multiprovider based on master data and cube. My master data has certain attributes which are not present in the cube. I want to display data for those fields in the multiprovider.
I can see cube data in the multiprovider view but i don't see any data coming from the master data info-object. 0INFOPROV shows only cube name.
Is there something i am missing or any setting that i need to do ?
Points will be awarded to the helpful answers.
Thx,
SoumyaHi All,
Multiprovider always has issues when you are trying to link two objects vary in their structure. Lets say if you are creating a multi-provider on a ODS object & Cube or Cube & Info-object. Lets say CHAR X is available in Cube and not in ODS or master data.
Any selection on char X will not fetch you any record from ODS / master data as it is not available in ODS / master data. You need to add the characteristic to ODS / master data and update the same way as you are updating it in the cube. Otherwise don't make any selections based on this characteristic.
Hope it helps.
Thanks
Soumya
Maybe you are looking for
-
I just upgraded to 4.2 and my iPad will no longer sync my photos from iPhoto. They synced just fine before I upgraded but now I get an error: "Some of your photos, including the photo "IMG_1402.JPG, were not copied to the iPad because they cannot be
-
I have to extract all files from a hard drive of a macbook pro that is no longer working. All I have to access the hard drive is a PC, is this possible, and if so how?
-
Edit/Options button not working on Droid 2
Edit/options button randomly stopped working, home and all other buttons work. have factory reset my phone and taken the battery out. any other suggestions?
-
Editing narration on multiple slides
Two problems I'm encountering (w/Captivate 7): A) Words break across slides & B) Volume is not matching. Thank you for any assistance!
-
Having architectural difficulty, need help. advice.
Here is my situation. I have a program that draws pictures which represent real things. There is a database underneath. The pictures represent things and I need to use the database to discern a lot of the info. I split the logic database tables from