Multiprovider shows data from only one cube?

Hello
I have created one infoprovider for slow moving stock which has 2 cubes (ZIC_C03 & ZIC_C07) & 1 ODS (ZMM_ODS)..
I have loaded 4 records in 2 cubes & 1 ODS..
When I go in tcode listcube to see data of multiprovider, it shows me data only from one cube ie ZIC_C03..
It doesnt display data from remaining 2 data targets (I have same records in all 3 data targets)
Kindly tell me how to solve this probelm
Thanks
Neha

Dear Neha,
Check this info...might be helpful...
select the option "create reccomendations" in the bottom option in the identification tab.
and check now tf the data from alll the data providers is coming or not....
"Identification" is in the top just besides "dimension" option in the characteristics tab.
Just chose which infoprovider you want the respective char to come from.
"Selection" option will be in the key figure tab in the multiprovider....just chose the key figure you want to come from which underlying infoprovioder.
Identification tells which char will be populate in the multiprovoder through which infoprovider so if you have some char as A tehn identification should be from A char in all the infoproviders...just tick that option there.
In case of selections if you have same two key figures coming from two providers then select the provider which you want it come.
Hope this helps u...
Best Regards,
VVenkat...

Similar Messages

Multiprovider showing data from only one underlying object?

Dear Bwers,
I have a Multiprovider (MP) that is defined on an ODS object and an InfoCube. When i create a query on the MP, i can see values that are coming from only the ODS and not the InfoCube. I have identified the key characteristics from both the ODS and Cube and checked them in the MP in the identification tab.Can anybody suggest me something that i may be missing?
Thanks
Raj

Bhanu,
How do you include 0INFOPROV in the query? i have checked the underlying infoproviders (ODS and Cubes) and see that the objects have data based on sample key fields that i selected(using listcube). i have also run the query with RSRT option using the multiptovider explain option and got the message as below. Please help me with the message below. (remember the MP has four underlying objects, 2 ODS and 2 cubes).
Thanks
Raj
00010004              I*** MultiProvider ZPUR1: InfoProvider 0FIAP_O03 ***
00010004              I    OSS Note 489135 describes messages in more detail
00010004              I*** MultiProvider ZPUR1: InfoProvider ZDELFOR ***
00010004              I- Access to ZDELTEK was skipped. (MPR filter)
00010004              I*** MultiProvider ZPUR1: InfoProvider 0PUR_C01 ***
00010004              I- Access to 0PUR_C01 was skipped. (MPR filter)
00010004              I*** MultiProvider ZPUR1: InfoProvider 0PUR_C04 ***
00010004              I- Access to 0PUR_C04 was skipped. (MPR filter)
00010004              IThe MultiProvider query is executed sequentially (reason: ONE)

Ipad does not show email from only one sender

I have my outlook.com email address setup to come to my Ipad. I have noticed over the roughly year that I have had it that email messages from one particluar sender does not show up on the Ipad. All other emails come thorugh fine it is just this one sender, which I receive email from on a regular basis. Any thoughts on cause or remedy for this? I have added the sender to my contacts list,checked the junk file, deleted and reintalled the email account all with no luck.

If they are not being received by the server, then this is not a Thunderbird problem. So, first you need to determine if your server is receiving the emails.
Logon to your webmail account using a browser, are those emails shown in the webmail account?
Are they in the webmail Inbox folder or another folder - check the spam folder?
Do you use an IMAP or Pop mail account?
If the emails are not in webmail account, then Thunderbird cannot see them.
If the server is not receiving the emails, then check that the sender is actually using your correct email address.

Updating data from PSA to CUBE

Hi Experts,
i got a mismatch between R/3 and BW reports, one document number value has not updated in PSA and INFOCUBE, that's why it is showing wrong value in BW report, i know which value and in which field it has missed.
I want to enter that field value in PSA and again i want to load the data from PSA to CUBE.
is it possible or not,
shell i do like this.
thanks in advance
Venkat

It is very much possible In PSA.
But it is not the best way to do.
Maintain that in PSA and do a delta load to the cube.
Cheers,
Shana
assigning pts is the way of saying thanks in SDN

Is it possible to show data from two different sql tables?

Is it possible to show data from two different sql tables? Either to show combined data by using a join on a foreign key or showing a typical master detail view?
I have one table With data about a house, and another table With URL's to images in the blob. Could these two be combined in the same Gallery?
Best regards Terje F - Norway

Hi Terje,
If you have a unique key, you could use one of the following functions for your scenarios:
If you only have one image per house, you can use LookUp:
http://siena.blob.core.windows.net/beta/ProjectSienaBetaFunctionReference.html#_Toc373745501
If you have multiple images per house, you can use Filter:
http://siena.blob.core.windows.net/beta/ProjectSienaBetaFunctionReference.html#_Toc373745487
Thanks
Robin

How to ensure data from ods to cube are correct or not

hi all,
i am just trying to get data from ods to cube. how to make ensure that the records that i fetched from ods to the respective cube are correct and number of records are the same.
thanxs in advance
regds
hari

Dear Hari,
There are two ways of confirming correct loads:
1. Level by Level Analysis
2. Comparision with Virtual InfoProvider
First method is by analysing data at each level. First at Database Table (if loading from R/3) or Excel (if loading from flatfile), then at extraction level (See data at RSA 3, not possible with flatfile). After this load data to BW through PSA and check the content of PSA. After that load it to Infoprovider and varify there.
Second method is to create a Virtual Infocube on the datasource (extract exact data through FM). And create a multiprovider by combining this Virtual cube and original Cube. Then create a Query with calculated key figures as difference of each key figures from two cubes. This way you can say that which value is not matching.
I suggest you the first method, but the standard way would be second one at highly critical loads where you cannot match huge ammount of data.
Hope it helps...
Regards,

Issue when uploading Sales data from DSO to Cube.

Dear All,
I have an issue when I am uploading Sales data from DSO to Cube. I am using BI 7.0 and I have uploaded all sales document level data to my DSO. Then I use a transformation rule to calculate the Sales Value when I am doing DTP to cube. Cube has customer wise aggregation data.
In DSO I have NetPrice(KF) and Delivered_QTY(KF). I do a simple multiplication routine in the transformation from DSO to Cube.
RESULT = SOURCE_FIELDS-NET_PRICE * SOURCE_FIELDS-DLV_QTY .
At the moment I use Active Table(With out Archive) on the DSO to get the data since this is my first load.
Issue is that the figure (Sales Value) in the cube is incorrect. I am getting a very large values which is impossible.
Can someone please help me.
Shanka

Hi,
are you sure that cube has customer wise aggregated data..since it will always aggregate the values of the key figures for the same set of characters...
did you checked the values for the key figures as well and if even they are inflated or is the problem with this key figure only.
During the data load the records may aggregates first for the same values of characters and then multiplication will be happening....if that is the case then you may have to multiply the values before storing it in the data package and then let it aggregate....can be achived through start routine...
but first verify if other key figures are also having the same issue.
Thanks
Ajeet

ERROR : "Exceptions in Substep: Rules" while loading data from DSO to CUBE

Hi All,
I have a scenario like this.
I was loading data from ODS to cube daily. everything was working fine till 2 days before. i added some characteristic fields in my cube while i didn't do any change in my key figures. now i started reloading of data from ODS to cubes. i got the following error "Exceptions in Substep: Rules" after some package of data loaded successfully.
I deleted the added fields from the infocube and then i tried toreload data again but i am facing the same error again "Exceptions in Substep: Rules".
Can any one tell me how to come out from this situation ?
Regards,
Komik Shah

Dear,
Check some related SDN posts:
zDSo Loading Problem
Re: Regarding Data load in cube
Re: Regarding Data load in cube
Re: Error : Exceptions in Substep: Rules
Regards,
Syed Hussain.

When I extracting data from DSO to Cube by using DTP.

When i am extracting data from DSO to Cube by using DTP.
I am getting following erros.
Data package processing terminated (Message no. RSBK229).
Error in BW: error getting datapakid cob_pro (Message no. RS_EXCEPTION105).
Error while extracting from source 0FC_DS08 (type DataStore) - (Message no. RSBK242).
Data package processing terminated. (Message no. RSBK229).
Data package 1 / 10/04/2011 15:49:56 / Status 'Processed with Errors'. (Message no. RSBK257).
This is the brand new BI 7.3 system. Implementing the PSCD and TRM.
I have used the standard business content objects in FI-CA (dunning history header, item,activities) and standard Datasource (0FC_DUN_HEADER ,0FC_DUN_ITEMS, 0FC_DUN_ACTIVITIES). I have extracted data till the DSO level . when I try to pull the data to info provider level(cube) using DTP . I am getting fallowing error.
my observation: when ever I use the DSO as source to any target like another DSO or cube. its throwing same kind of error for any flow including simple Flat file .
please suggest any one whether do I need to maintain basic settings since its a brand new BI 7.3.
please help me out on this issue . I am not able to move forward .its very urgent

hello
Have you solved the problem ?
I have the same error...
as you solve this error,
can you help me please I have the same error
yimi castro garcia
[email protected]

Error while uploading data from ODS to Cube

Hi All,
Will you please help out this issue.As this is a priority high issue,please reply if you know the answers.
I am facing an error while loading the data from ODS to CUBE,the error
is
<b>1.Name is not in the namespace for generated BW Metaobjects
2.Error 18 in the update</b>
And this error is occuring only in quality server.
Thanks,
Ram.

HI RAM SIVA,
make sure that the Data source is replicated and tranfer rules r active.
And also check whether the all transport requests r imported properly.
hope it helps
bhaskar

Error while loading data from ODS to CUBE.

Hi friends,
When l am loading data from ODS to Cube with help of data mart, I am getting error in QA system , IN DM system ,every thing went well.IF i see the detail tab in monitor under Processing .
Its is showing like this .
Transfer Rules : Missing Massage.
Update PSA : missing massage.
Processing end : missing message.
I have checked the coding in update rules, everything is ok.
Plz any inputs.
hari
Message was edited by:
hari reddy

Might means that IDocs flow is not defined properly in your QA system for myself-SourceSystem.
Regards,
Vitaliy

Why does my iphone send all text from only one of my contacts to my email?

Why does my iphone send all text from only one of my contacts to my email? I'm curious to know if anyone else has had this issue with the Iphone 5s...

imessage has a new setting that shows all emails associated with your apple id. There are two sections, send and receive. Since you are using the same apple id, Im sure if you adjust one of those settings to your mobile number instead of your appleid, it wont send double.
You might also have to adjust your wifes settings too, so those emails dont overlap

Error when trying to load data from ODS to CUBE

hi,
Iam getting a short dump when trying to load data from ODS to CUBE. The Run time error is 'TYPELOAD_NEW_VERSION' and the short text is 'A newer version of data type "/BIC/AZODS_CA00" was found than one required.please help me out.

Hi,
Check this thread.........Ajeet Singh has given a good solution here.........
Re: Error With Data Load-Getting Canceled Right Away
Also check SAP note: 382480..................for ur reference............
Symptom
A DART extraction job terminates with runtime error TYPELOAD_NEW_VERSION and error message:
Data type "TXW_INDEX" was found in a newer version than required.
The termination occurs in the ABAP/4 program "SAPLTXW2 " in "TXW_SEGMENT_RECORD_EXPORT".
Additional key words
RTXWCF01, LTXW2U01, TXW_INDEX
Cause and prerequisites
This problem seems to happen when several DART extraction jobs are running in parallel, and both jobs access table TXW_INDEX.
Solution
If possible, avoid running DART extractions in parallel.
If you do plan to run such jobs in parallel, please consider the following points:
In the DART Extract configuration, increase the value of the parameter "Maximum memory allocation for index (MB)" if possible. You can estimate reasonable values with the "File size worksheet" utility.
Run parallel DART jobs on different application servers.
As an alternative, please apply note 400195.
It may help u.........
Regards,
Debjani.......

Show data from sql server to oracle db

Hi,
I am using oracle 10g R1 on windows 2003 platform. On one machine database 10gR1 is running and on other machine sql server is running. I want to retrieve some data from sql server to oracle database. Please tell me how I can show data from sql server to oracle db.
Thanks

To make heterogeneous connection with oracle:
1.First make an ODBC connection, make entry in System DSN(to create a data source)
2.Make an entry in tnsnames.ora
3.Make an entry in listener.ora under SID_LIST_LISTENER
4.Make an entry in file named init<HS>.ora file located "oracle_base\oracle_home\db\hs\admin"
5.Restart the listener
e.g:
1. create a odbc system dsn named like 'sqlserver'
2. sqlserver= (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp) (HOST=xx.xx.xx.xx) (PORT=1521))
(CONNECT_DATA = (SERVICE_NAME=sqlserver))
(HS = OK)
3. (SID_DESC = (SID_NAME = sqlserver) (ORACLE_HOME = oracle_base\oracle_home\db) (PROGRAM = hsodbc) )
4.Create a file named initsqlserver.ora and make the following entry:
HS_FDS_CONNECT_INFO = sqlserver
Alternatively, you can copy the file named inithsodbc.ora and rename it to initsqlserver.ora
and edit as HS_FDS_CONNECT_INFO = sqlserver
5. lsnrctl reload listener_name
regards
adnan kaysar

I want to get data from only RESB table without loss of any deltas

i have to fetch the reservation details for the production orders.
we are using descrete manufacturing method to keep track the Work in process and cost .
for addition of components manually in the production order we can track thru change date i.e From AUFK table with field name AEDAT. for each time when we are adding the components the system will create a new line item In tableRESB-OBJNR(field)
i need very few fields from RESB table to be pulled into SAP BW.
how should i proceed creating a generic exractor without any loss of deltas.
i want to get data from only resb table into sap bw.
how should i proceed with Generice extractor with single table RESB and what would be the delta field . could any one throw some light .
all answers would be rewarded with points

I have few reports for BOM data is to be pull into bw
all the reports contain the same tables Mentione below
MAST- material to BOM LINK
STKO- BOM header
STPO- BOM ITEM
STAS- BOM ITEM SELECTION
how should i create ageneric datsource satisfying that all the data comes from these tables without fail of deltas,
my doubts.1. Do i have to create a separate data sources (generic) for all these individually and load into separate ODS'S AND CLUB THEM into single ODS further.?
if i create i dont know what should be delta field that has to be picked for each datasource
2. Do i have to create a view on all these tables and create a generic datasource.if created what would be the delta field i have to select.
could you pls let me know how should i pull the data without loosing any deltas
could you pls let me know the flow with delta fields mentioned
regards,
P

Multiprovider shows data from only one cube?

Similar Messages

Maybe you are looking for