Multiscreen panel in Preview - like in Dreamweaver?

Could Muse adopt the Multiscreen panel from Dreamweaver and add it as an option in the Preview mode?
That would be very useful for Web App development.
Dan

Hello,
This has already been logged as a feature request : http://forums.adobe.com/ideas/1446#comment-2949
Hopefully you will see it in future releases of Adobe Muse.
Regards,
Sachin

Similar Messages

Adobe Exchange panel doesn't appear in Dreamweaver CC

I've joined CC and I'm using Dreamweaver, I've also tried to download and install Adobe Exchange panel without success - I can see it in extension manager but the panel doesn't appear in Dreamweaver. I'm beginning to regret ever signing up for CC as it appears to be very glitchy. Could someone help me with this please.
I'm running Windows 7
Many thanks
Maddie

Hi Maddie,
Thank you for this extra information regarding the Exchange Panel not appearing. It's strange that the problem appears in both CC and CS6 - these use different processes and different installation directories for extensions and should be independent of each other.
A few questions -
Can you please look in Task Manager when Photoshop CC is running and see if there is a process listed called "Adobe CEP Service Manager"? Do you have any "system optimisation" or security software running which may be blocking processes that you haven't expressly permitted?
In Photoshop CC, can you see any other extensions listed in Window -> Extensions? Upon installation there should be other Extensions available, for example "Kuler" - can you see this in the dropdown? This will help us to work out whether this is a problem with Adobe Exchange specifically, or if it is an issue with all extensions in general.
If you can then turn on logging as follows, that would be very helpful:
In Registry Editor, regedit.exe:
HKEY_CURRENT_USER>Software>Adobe>CSXS.4
Increase the LogLevel to 6. Then run Dreamweaver or Photoshop CC - Log files will be generated in: C:\Users\<username>\[AppData]\Local\Temp. If you are in Photoshop the log file will have the filename csxs4-PHSP.log, and for Dreamweaver it will be csxs4-DRWV.log. Please email these log files to me at fgregor at adobe dot com.
Upon searching the forums, there was another user who may have had the same problem as you (http://forums.adobe.com/thread/1291469) - can you check whether C:\Program Files (x86)\Common Files\Adobe\CEPServiceManager4 contains CEPServiceManager.exe?
Regarding the "glitchy" issues you mention - this forum is for Adobe Exchange, but if you can provide a bit more information about what is going wrong then we'll try to redirect your question to someone else who can help.
Best regards,
Fraser

Does the new firefox work when previewing files from Dreamweaver?

I use Dreamweaver CS3. I always preview my pages that I build in Firefox. After just downloading the newest firefox version (3.6.10), I could no longer preview files in Dreamweaver. When I go to preview the file, it just opens a firefox the application, not my webpage within firefox. Any ideas? I even edited my browser list within Firefox, removing Firefox as one of my browser options and replacing it again.

Dreamweaver CS3 doesn't work correctly in any Firefox 3.6 version.
There is a fix for Dreamweaver, so it works in Firefox 3.6+ versions:
http://solutions.marketingmedley.com/
There is a $5.00 fee for that Dreamweaver fix. That website and the fix are not associated with Mozilla in any manner. Support for that fix is provided by that that website via email.

Previewing ASPX in Dreamweaver 8

I would like to preview ASPX files locally in Dreamweaver 8.
I suspect you need additional software other than Dreamweaver 8 and
an ASPX file to do this. Am I wrong? Could it be possible that I am
just not doing the TEST SERVER setup correctly?
So
1- Do I need extra software installed?
2- If not, what is the easiest way to set it up so
complicated path names etc don't muck up the solution?
Thanks!
Nostrildamus

Nostrildamus wrote:
> Oh yes, How do I point Dreamweaver file to this IIS
interpreter. Where does
> this interpreter reside? Is it an executalbe file or
dll? There is no query in
> the setup like this
>
> ENTER LOCATION OF ISS
EXECUTABLE___________________________
> otherwise I'd be done now.
It doesn't work like that, sorry.
You should have this folder structure:
C:\Inetpub\wwwroot\
That is the root of your testing server, or it should be
something like
that, have a look in the IIS manager and see what is set as
the home
directory. That is where you want to put your aspx files.
Then, when you browse to:
http://127.0.0.1 or
http://youripaddress or
http://yourcomputername
(this is your testing URL in your site definition)
IIS will server the pages to you. In IIS you can set the
default page
that gets served when you don't specify one.
This might help you understand it better:
http://www.adobe.com/devnet/dreamweaver/articles/setting_up_asp.html
Dooza
Posting Guidelines
http://www.adobe.com/support/forums/guidelines.html
How To Ask Smart Questions
http://www.catb.org/esr/faqs/smart-questions.html

Jquery Mobile Website does not preview properly in Dreamweaver's Live View or in my web browser

I'm using Dreamweaver 12.0 Build 5861.
I can't figure out what I'm doing wrong. I go
File / New / Page from Sample / Mobile Starters / JQuery Mobile with theme (local).
I then save my page.
Then when I go to preview my new page in Live View, it shows a page without any styles, etc.
When I upload the page and additional files created by Dreamweaver to my server. I preview it and it will look like the default style JQuery page, but when I click on the button to see the content for that page, there is not a "back" button to come back to my home page.
Also, when I try to implement a JQuery mobile swatch, the Swatch window says "No Theme Applied."
I feel like I'm missing something really simple,,, but what? Is there a setting I need to change or am I missing a step? I have looked at many video tutorials online and I believe I am taking the same steps.

You're missing the viewport meta attribute. Add ths to your <head> section.
<meta name="viewport" content="width=device-width, minimum-scale=1, maximum-scale=1">
And add this to Line 13:
<div data-role="page" id="page" data-add-back-btn="true">
Do this for all page IDs.

Editing rule in separate panel in CC like in CS5

In Dreamweaver CS5 when I wanted to edit a style on a style sheet, I would highlight the style in the css panel and there was a little pencil icon which when clicked would open the whole rule in a separate window. This panel listed all the options you could click on for the rule.
In Dreamweaver CC you only get those choices when you are first creating a style, not editing it. Is there a way to set up CC like CS5 for this? I found it much easier to work with.

To get the old CSS Panel back into DWCC hit Ctrl + Alt/Cmnd + Shift + P
I'm not 100% sure it works exactly the way it did in DWCS5, but it's much closer then the CSS Designer.
From what I've heard, the CSS Designer is powerful once you have it figured out though.
Personally, I write all my css by hand.

Audio Preview - like in Mac OS X Finder

I like to add on this side (http://www.royalrichmanrecordings.de/#8) a audio snippet to each cover. The best would be to do it, like Mac OS X handels audio in the preview if navigate in FInder. See the attached picture. It´s not neccesary to look like it is in MAc OS X. But it would be great, to start and stop the snippet by clicking the Cover. Any ideas.
Regards Martin

Hey Martin.
I'm looking feverishly for explicit instructions on how to install bumpbox to get it working in Dreamweaver CS4. I can't find anywhere on the web where exactly the folder or files should be installed (locally) and a good example of code to make it work for a pdf. Do you either know of a site that spells it out for novice to mid-level user or can you possibly provide me with what worked for you?
With thanks.
Paul
P.S. By the way, to those who watch for such things, I'm posting a new discussion asking the same question of the entire forum since this is the only discussion on bumpbox that came up on my search of all forums.

Can't see swf file in live view or browser preview mode in Dreamweaver

I inserted a swf file into a div and it works fine in the standard edit mode (it plays when I push the play button on the properties panel). When I attempt live mode or preview in browser I get the message that i need flash player 10.3, which I have already installed. This is my code:
<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="750" height="500" align="middle" id="FlashID" title="slideshow">
      <param name="movie" value="slideshow.swf" />
      <param name="quality" value="high" />
      <param name="wmode" value="transparent" />
      <param name="swfversion" value="11.0.0.0" />
      
      <param name="expressinstall" value="Scripts/expressInstall.swf" />
      
      
      <object data="slideshow.swf" type="application/x-shockwave-flash" width="750" height="500" align="middle">
        
        <param name="quality" value="high" />
        <param name="wmode" value="transparent" />
        <param name="swfversion" value="11.0.0.0" />
        <param name="expressinstall" value="Scripts/expressInstall.swf" />
        
        <div>
          <h4>Content on this page requires a newer version of Adobe Flash Player.</h4>
          <p><a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" width="112" height="33" /></a></p>
        </div>
        
      </object>
      
    </object>
Help!

There were some Firefox plugin issues a while back
Please upload the page and any dependant files on the web, and post a link.
Many eyes, many browsers should reveal the problem

Extract panel does not show in Dreamweaver CC 2014 - using Mac - Why?

It is odd - as I used the Extract workspace, the Extract panel does not show - not even if I try opening it via Window -> Extract.
I have updated my Dreamweaver 2014 to the most recent version.
Can anyone help me?

Good to know that your issue has been resolved.
To further investigate why that issue happened we would need some more information from you.
Please tell us more about the settings of DW before applying patch
> Which workspace you were working before applying the patch ?
> What all panels were ON before applying the patch ?
> Did you perform any specific steps before applying the patch ?
> What is the version of your Mac ?
> Any extensions of DW installed?
Thanks,
Lalita

How can I save space on Hard Drive? Lo-Res Previews like Aperture.

I have searched these forums and the internet but not found a solution as yet.
My problem is I have a MacBook Pro and the hard drive is getting full.
I want hi-res images on an external hard drive but have a lo-res preview on my hard drive so I am never without all my pictures. I think from memory Aperture dose this, but I like iphoto's simplicity. I don't want to have aperture installed as well as iphoto.
Hope this makes sense.

Let me reinforce Larry's concern about the "referenced" mode. All it takes is to have an interruption between iPhoto and the external HD while you are working in iPhoto and the library will lose the links between the alias files in the library and the source files on the external HD. It will be very difficult to relink all of the alias files when that happens. Maybe one event at a time but that's no assurance.
Also you will not be able to use the library without the external HD mounted if you have any movies in the library. It's best to have a separate library for movie files in that event.
One option would be to run your primary library from the external HD and have a smaller one with the most current or needed photos on the boot drive. You can copy events and albums between the two libraries with the paid version of iPhoto Library Manager while keeping keywords, comments and titles intact.
Another issue with the "referenced" library is the fact that if you delete a photo from the library you will have to locate and delete the source file from the external HD. Additionally you cannot rename or move any source files with the Finder or add new photos to an existing source folder and expect it to be automatically imported into iPhoto. It's best for each new source import to have its own folder.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.≤br>
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

How can I get Firefox to display 'preview in browser' Dreamweaver Web-page files?

I chose Firefox as the primary browser for Adobe Dreamweaver's 'Preview in Browser' to display Web pages as I develop them. '''Firefox used to work just fine'''. Recently, however, when choosing Firefox to Preview in DW, FF merely opens to my home page. Once opened, FF will not accept/preview any files from Dreamweaver, regardless of how many times I choose to Preview. Safari and others - when selected as the preview browser - display them perfectly.
PPC Mac, OS X 10.4.11, Firefox v. 3.6.21

Have you tried the update to Fast Dial, version 4.2.1 or later? It should override the built-in new tab page: https://addons.mozilla.org/en-US/firefox/addon/fast-dial-5721/ ''(Note: I haven't tested it myself)''
If you are using a similar add-on that isn't the same "Fast Dial", which one is it?

In Indesign 2014 can you scroll through fonts to preview like you can in photoshop

In Indesign 2014 can you scroll through fonts to preview what the font will look like as you can in photoshop

http://indesignsecrets.com/test-font-choices-quickly-indesign-cc.php

Pyfmii - nine panel wmii/mc-like file manager

pyfmii - git repository
AUR: http://aur.archlinux.org/packages.php?ID=25148
Git Source: git clone git://github.com/Procyon2/pyfmii.git
A file manager with nine panels with the looks of wmii and behavior of mc
Dependencies: python
Screenshots:
Features:
- Nine panels
- Colorize by extension
- Command box that runs everything in a shell
- Tab-completion in command box
- While command box is up browse around and add items with alt+enter
- Command box pops up as soon as you start typing
- Customizable with ini-like rc file: ~/.pyfmiirc
- Multi session history (alt+p, alt+n): ~/.pyfmii_history
Usage:
./pyfmii -h
./pyfmii [ACTIVEPAD [OPENPADS]] [DIRECTORIES]
Default: ./pyfmii 1 . ~ ~ ~ ~ ~ ~ ~ ~
e.g.: ./pyfmii 2 1 9 /usr/bin ~/bin
will have panels 1 2 9 open with 2 active and 1 = /usr/bin, 2 = ~/bin, 3 = ~, 4 = ~ etc
Keybindings are on the git site
Bugs:
Recently/probably fixed bug:
- Restoring keypad mode in command win after resizing
- Files with macros work
- Opening vim in pyfmii and resizing gives an EINTR that will now be ignored.
- Resizing to a really small window caused a crash/infinite loop
Different behavior/features that I won't change:
- if with tab-completion you have a full match and there are more matches it will behave as if there was just a full match
- e.g.: dirs: "aa, aab" type: "aa<TAB>" -> "aa/"
- F2 advanced menu is not context sensitive like mc's
- you can't browse search results from '/'
- no bookmarks, ^\ will quit python actually
- F2-@ doesn't put the cursor at the start, F7/mkdir doesn't add a space so you can't begin typing right away
- mark all items marks directories too
- cd'ing to symlinks is like cd'ing to the actual file, unlike in bash/mc. I don't think this can be fixed in python
Last edited by Procyon (2009-04-06 20:07:33)

I just realized that alt+1-9 is commonly used in WMs, am I right? And the same for Alt+F1-F9
CTRL+1-9 doesn't seem possible because CTRL+1 = 1 and CTRL+4=^\ which, as I said before, immediately quits python.
CTRL+F1-F9 is possible. I had previously bound ^F5-^F8 to a no-confirm version.
Shift+F1-F9 is also possible
EDIT:
There is a mismatch:
Xterm Shift+F1 = F13
URxvt Shift+F1 = F11
/EDIT
EDIT: that leaves CTRL+F1-F9. I will remove all no-confirm keys. I have also put the command of F5-F8 in the configuration file so having two versions is not necessary (this will be in the next git push)
BTW Alt+1-9 (and now CTRL+F1-9) is used for setting the selected dir in the panel of the number (or cwd if a file), and it is also used in the command box to change panels (like regular 1-9) (after all you want "1-9" and "!-(" for commands)
And I noticed that the unicode space does not just not work on VC but also any non-unicode term like aterm. A normal space does work in all except in screen where it will cut off. If you go to the next window and back the bar restores, but any movement will cut it off again. Maybe there's a setting in screen that can control it. For now I removed all hardcoded unicode.
EDIT:
Screen behaves differently with "bce on" and "bce off",
off -> the long selector line is not drawn at all
on -> the long selector line is only drawn after refresh, and disappears when changing selection
/EDIT
aterm also seems to not work with curs_set(2) but it does with 1 and that is the same for everything (maybe not VC, haven't tried).
EDIT:
Config changed
If you made no changes you can remove it to let pyfmii autogenerate one, or add the following to ~/.pyfmiirc:
[basic]
#F5
copy = :cp -R -v -i -- %t %D
#F6
move = :mv -v -i -- %u %D
#F7
mkdir = :mkdir -p -v
#F8
remove = :rm -R -v -I -- %u
EDIT:
Besides Ctrl-F1-F9, I have also made F1-F9 have the same behavior in the command box.
Last edited by Procyon (2009-01-29 13:58:50)

Fireworks Rollover previews OK from Dreamweaver, breaks when uploaded

Hi,
I'm trying to add popup menus to the menu bar for one of my clients. Everything looks great when I preview the page in Firefox, Flock and Explorer. However, when I upload the page, the rollover behavior quits working for the menu items with popup menus and the popups do not display in either Firefox or Flock. In Explorer, I get bunches of script error messages.
Here's the location of the uploaded page: http://www.davidmontgomerypaintings.com/new/index.htm
I also attached the .png file below.
The "Gallery," "About" and "Events" buttons are the three with the rollover behavior and popup menu issues.
I have a Flash animation on the page and had used the transparent command to allow the popup menus to overlay the animation sequence. I thought that was the problem, so I removed the transparent parameter and used Fireworks to located the popup menus above the animation sequence. Same result.
I had the "Use CSS for Popup Menus" and the "Write CSS to an external file" options turned off in Fireworks because we are avoiding CSS on this site (easier for client to edit later on). I went in and turned both of those on, wrote new html code from Fireworks, opened Dreamweaver and used the edit in fireworks option to update the html code changes. Same result.
Does anyone have any ideas what the problem is? Help. This is getting really frustrating.

Actually, this did help the rollover behavior.
However, the popups still do not show up on the
page I was editing, the new index page. Weirdly
enough, if you click on any other page on the
entire site, the pop up menus now work. They
didn't before. And I didn't make any edits on any
page other than the index page, they work as
originally designed and use all the code from the
original (ie. last week's) Fireworks menu bar file.
So, I don't quite get it. If the.js and .css
files were written based upon the new Fireworks
menu bar I created via the editing today, and
this is what I uploaded, why would that make the
original menu bar work? These pages even work in
Internet explorer now. The only page that doesn't
work is the index.htm page, the one I've been
messing with all day! LOL Maybe I need to go back
to my idea that this is linked to the Flash
animation and the transparent parameter.
By the way, I tried copying the table with the
menu bar from one of the working pages to the index page with no luck.
Thanks for the idea though. It may have gotten me
part way to the final solution.

3.6.10 no longer lets me preview sites from Dreamweaver CS4 - my bug or theirs?

I updated my Mozilla Firefox browser via the automatic updates the other day, and I can no longer use Firefox to preview pages designed in Dreamweaver.
The other browsers still work, just this one.

There is a fix for Dreamweaver, so it works in Firefox 3.6+ versions:
http://solutions.marketingmedley.com/
There is a $5.00 fee for that Dreamweaver fix. That website and the fix are not associated with Mozilla in any manner. Support for that fix is provided by that that website via email.

Multiscreen panel in Preview - like in Dreamweaver?

Similar Messages

Maybe you are looking for