MultiSelect field is displayed extra wide in IdM UI after Portal update (IdM 7.2 SP8)

Hello community,
it's time again, I need your help with a very strange IdM issue.
My problem:
Our 7.31 portal was just (read: today) updated from SP6 to SP10. Now my IdM is not only ignoring the portal theme (which I need to look into, too), but is displaying MultiSelect fields with a width, that seems to find no end.
The scrollbar looks like this,when I look at a UI mask with a MultiSelect field:
And when I scroll completly to the right, the rows of the field will go on and on and on for quite some time and then end (circa in the middle of the page) and then I can scroll the rest of the page with just seeing the background and at the end I find the arrows, but no second field with the selected values (even when I click on the arrows):
I can select a value and add it via the arrows, then save and it will perform normally, what the mask is for, so the field itself is working, it's just the display, that is totally wonky.
Some comments:
1. My user has admin rights in portal and IdM.
2. I'm using IE 9 to look at this mess, with Firefox 23.0.1 everything looks like it should.
My question(s):
Pretty simple at that... what's going on? I've never seen the IdM (mis)behave like this and it looks like it's just the case in the IE.
Has anyone of you guys an idea, what could be wrong here?
Could this be connected to the issue, that the IdM (and other webdynpro applications like the UWL) don't use the portal theme anymore?
I fixed this by implementing SAP-note 1910490, so no connection there.
Regards,
Steffi.
Message was edited by: Steffi Warnecke
Fixed the theme-problem and updated the post accordingly.

Hello Matt,
yes, that mode is standard for our portal, so that's not rescuing me this time. ^^
I have discovered that IE8 is working, too (that's installed on our IDM-server). But that doesn't help, when IE9 is our standard browser for clients. Updating the IDM components for the portal to SP9 didn't help either. Neither did another reboot of the portal server (one can dream ).
I created an OSS ticket with SAP for this today and will update this thread, when they come up with a solution. Maybe it's just a small thing like with the subscription emails back then.
It sure is fun, when you update one thing and another is acting up because of that. Oh how I hate updating stuff! GNAR!
Regards,
Steffi.

Similar Messages

Display no longer wakes from sleep after latest updates

G4 Quicksilver 933, nVidia Ti, 1.5GB, 20in Cinema Display
I applied the latest updates that were pushed out recently (10.5.2 and the "Leopard Graphics Update") and now my Apple display will not properly come up when I wake the box from suspend.
That is, it starts and runs fine, but if it goes into sleep, upon waking it will (sometimes) flash the contents of the desktop, and then go black. The litte green light is on. Happens from a logged in session, or from the main login screen.
I have to hit the reset or power button (or login via SSH and issue a shutdown) to get it to work again.
I only have a single monitor.
I tried:
o Powering the monitor off and on, both from the switch and by pulling the power cable
o Pulling the DVI cable and reinserting it
o Resetting NVRAM
o Re-applying both the 10.5.2 combo installer and the Leopard Graphics Update 1.0 in order
o Waving a magic wand... I mean, fixing permissions
o Changing the display resolution a few times
o Running fsck a few times (only because all these unclean shutdowns are making me nervous)
o Hitting the "Detect Displays" button in the Displays Prefs panel...
Aha! Hitting that button causes the display to flash and then go dark. I have to power cycle the unit to get the monitor to come up again.
I do have the special build option of the faster video adapter which was available all those years ago. It's quaint now, sure, but it was a fast card back then.
I'm stumped. It's surprising how something like this can turn a perfectly reasonable desktop into a boat anchor.
Message was edited by: John Verne

mjelacic wrote:
This Discussion is marked as Answered, but with my apologies to the other respondents, it is NOT. There is a problem. The software/hardware do NOT work as they are supposed to. Apple needs to address this problem immediately. Mac Book Pro will not wake from sleep when connected to a Cinema Display 23". The problem lies in the most recent operating system updates. Before the update the products worked as advertised, since then they do not. Period.
With all due respect, I am the one who posted this, and I marked it "answered." Yes, there very well may be a problem with the Leopard Graphics Update 1.0 (what a mouthful! I dub it "LGU v1.0" from this point on.), but this is so far only a hypothesis.
I found an immediate workaround which suits my purpose. If this does not suit the purposes of completely foreign (to this discussion) symptoms related to Intel-based Apple laptops and external displays, then so be it. I recommend splitting off your own symptoms to a new thread.
Certainly, my reading of the symptoms described after I posted mine mostly do not sound like what I ran into at all. For example, I never once said that my computer had problems waking from sleep. I said the /display/ had problems waking/starting up after sleep, and this is probably related to the "detect displays" mechanism that the OS uses to find attached displays when it comes out of suspend. Even if this is my misunderstanding it does not matter, since this is how it comes across to a reader. This may indicate that someone may want to clearly and carefully describe /exactly/ what they are seeing, and the steps they took in order to come to any conclusions they might have.
This will help Apple, and it will certainly help others that search these threads with their own similar but different issues they need solved.
If there is a common reproducible issue related to displays and the most recent update(s), then Apple already knows about it, or soon will. As far as my immediate needs are concerned, this is answered.

Display extra values not displaying extra value

Hi,
I have a SQL query that returns a LOV. I have "Display Extra Values" set to Yes. However, I don't see my "extra value" in the Select List. ?? Yet, when I check the session state, the value in the session state is the extra value. So how come I don't see it in my Select List?
Thank you.

This is from the on-line docs:
To define a value that does not display in the list of values:
a) From Display Extra Value, select Yes.
The extra value is used if the actual column value is not part of the LOV. In that situation, the actual value is shown. If you do not display extra values, you may end up with the wrong value and unintentionally update your data incorrectly.
b) In Null Value, specify the value that displays.
c) If you have not selected a Named LOV, enter the query used to display a select list in the LOV Query field.
Hope that helps.
Thanks,
Joe

Extra Wide Video Dimensions

I am by no means a Premiere power user, but I've been creating pretty simple videos for the web for several years.
Recently I've had a strange problem with the widescreen output dimensions, where the video becomes "extra wide" compared to the source file. I've spent a lot of time trying different things to fix this, with no luck.
Details:
1) A client sends us a .vob file they capture from TV (yes, they have approval to use the clips online).
2) We run the clip through Cinematize (output to .mov because the .avi output always fails). The original clip is in a widescreen format (720 x 480).
3) We import the .mov files into Premiere to adjust anything needed and output to flash.
4) I just put the video in Premiere to 100%, did a screen capture and then opened that in Photoshop. Intead of being 720 x 480, the video dimensions are 720 x 400, so the vidoe is being compressed on its vertical axis.
5) On output, the video shows in the widescreen dimensions, with a large black band on both the top and bottom of the clip within the window, so that it is now squished on its vertical axis.
6) I have the added problem of having a black band appear on the top and bottom of the video on the output screen - this happens when I select flash for the output. The only way I can fix it is to change the video dimensions to 720 x 400.
Can anyone help me understand why this is happening and what I need to do to correct the problem? I've checked the knowledge base and other sources with no luck.
Thanks!!
Julie

Julie,
This sounds like there is still a heat related problem going on. Other than heat, the only time that I have experienced similar was when a MoBo was headed "South." Replaced that, and added more/better cooling, and that box is still working fine.
When the thermal load on a computer gets up near critical, it *should* shutdown by default. If one is doing heavy NLE work, then things WILL heat up and in a hurry. A computer that works fine with a word processing program going, will often display its weaknesses when working in a program like Premiere.
If this has happened several times before, the BIOS chip might have been weakened to the point that it now looses its memory. Premiere just gets the machine hotter than most other programs will likely do.
Flashing the BIOS is but a stop-gap measure. Will possibly work, until the next bout of heat-stress, then it goes blank, or at least daffy. Some BIOS chips can be user-replaced, but I think I'd be shopping for a new MoBo and some heavy-duty cooling to go with it. When installing the new MoBo, bind all cables, so they do not impede the airflow. Besides looking neater, more cool air can reach components.
Good luck,
Hunt

Regarding Selection Screen field making display field in ALV report

Hi All,
In ALV Report, at runtime how can i make the field as Display Field in selection screen .
Thks & Regds
Shailesh

hii,
Go to se38 and give the below progra name execute.... check the source code it is very easy to understand.
1.demo_dynpro_modify_simple
2.demo_dynpro_modify_screen
if tou are using grid,u can refer to foll link
sequencing / choosing fields in report screen at runtime,
Display the Columns in the grid at run time
rgrds,
Shweta

Master-detail: detail field not displayed after changed by master field

I want to use the Depends on item with Clear/refresh value functionality in a master detail situation. Within the same group it is no problem to use the setter method of a field to change a second field and then displaying this new value. But in the detail group, I can not select items from the master group as a depends on item.
In the setter of the master field, the value in a field for each row in the detail (table layout) is updated. The only problem is that this updated value is not displayed, the old value doesn't change. When saving the changes, the displayed value is committed to the database. When de updated field is not displayed at all, the correct value is saved, so I know the detail field is updated.
How can I make sure the displayed value in the detail is displayed after changeing a master field? I already gave the detail field the correct partial trigger.

Wouter,
I guese you don;t see the changed value when you display the detail item because after the depends on item update changed the detail item, JSF procesing continues and the detail table changes are sent to the server which will override again the detail item attriibute, resetting it to the old, still displayed value.
So, the trick is to get PPR working. Make sure the partialTYriggers property of the detail item is set to the value of the id property of the master item. If it still doesn't work, try setting the partial triggers property on the table, instead of the individual item.
Steven Davelaar,
JHeadstart team

Performance degradation: unfetched field [PublishingPageContent] caused extra roundtrip

Hi All,
   I am facing some serious application pool crash in one of my customer's Production site SharePoint servers. The Application Error logs in the event Viewer says -
Faulting application name: w3wp.exe, version: 7.5.7601.17514, time stamp: 0x4ce7afa2
Faulting module name: ntdll.dll, version: 6.1.7601.17514, time stamp: 0x4ce7c8f9
Exception code: 0xc0000374
Fault offset: 0x00000000000c40f2
Faulting process id: 0x1414
Faulting application start time: 0x01ce5edada76109d
Faulting application path: c:\windows\system32\inetsrv\w3wp.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Report Id: 5a69ec1e-cace-11e2-9be2-441ea13bf8be
At the same time the SharePoint ULS logs says -
1)
06/13/2013 03:44:29.53 w3wp.exe (0x0808)                       0x2DF0 SharePoint Foundation
        General                                8e2s
Medium              Unknown SPRequest error occurred. More information: 0x80070005      8b343224-4aa6-490c-8a2a-ce06ac160773
06/13/2013 03:44:35.03 w3wp.exe (0x0808)                       0x2DF0 SharePoint Foundation
        General
8e25      Medium              Failed to look up string with key "FSAdmin_SiteSettings_UserContextManagement_ToolTip", keyfile Microsoft.Office.Server.Search.
8b343224-4aa6-490c-8a2a-ce06ac160773
06/13/2013 03:44:35.03 w3wp.exe (0x0808)                       0x2DF0 SharePoint Foundation
        General                                8l3c
Medium              Localized resource for token 'FSAdmin_SiteSettings_UserContextManagement_ToolTip' could not be found for file with path: "C:\Program Files\Common Files\Microsoft Shared\Web
Server Extensions\14\Template\Features\SearchExtensions\ExtendedSearchAdminLinks.xml".              8b343224-4aa6-490c-8a2a-ce06ac160773
2)
06/13/2013 03:44:29.01 w3wp.exe (0x0808)                       0x2DF0 SharePoint Foundation
        Web Parts
emt4     High       Error initializing Safe control - Assembly:Microsoft.Office.SharePoint.ClientExtensions, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c TypeName: Microsoft.Office.SharePoint.ClientExtensions.Publishing.TakeListOfflineRibbonControl
Error: Could not load type 'Microsoft.Office.SharePoint.ClientExtensions.Publishing.TakeListOfflineRibbonControl' from assembly 'Microsoft.Office.SharePoint.ClientExtensions, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c'.
8b343224-4aa6-490c-8a2a-ce06ac160773
06/13/2013 03:44:29.50 w3wp.exe (0x0808)
0x2DF0 SharePoint Foundation                 Logging Correlation Data
xmnv     Medium              Site=/    8b343224-4aa6-490c-8a2a-ce06ac160773
3)
06/13/2013 03:43:59.67 w3wp.exe (0x263C)                       0x24D8 SharePoint Foundation
        Performance                   9fx9
Medium              Performance degradation: unfetched field [PublishingPageContent] caused extra roundtrip.     at Microsoft.SharePoint.SPListItem.GetValue(SPField fld,
Int32 columnNumber, Boolean bRaw, Boolean bThrowException)     at Microsoft.SharePoint.SPListItem.GetValue(String strName, Boolean bThrowException)     at Microsoft.SharePoint.SPListItem.get_Item(String fieldName)
at Microsoft.SharePoint.WebControls.BaseFieldControl.get_ItemFieldValue()     at Microsoft.SharePoint.Publishing.WebControls.RichHtmlField.RenderFieldForDisplay(HtmlTextWriter output)     at Microsoft.SharePoint.WebControls.BaseFieldControl.Render(HtmlTextWriter
output)     at Microsoft.SharePoint.Publishing.WebControls.BaseRichField.Render(HtmlTextWriter output)     at Microsoft.SharePoint.Publishing.WebControls.RichHtmlField.R...
b8d0b8ca-8386-441f-8fce-d79fe72556e1
06/13/2013 03:43:59.67*               w3wp.exe (0x263C)
0x24D8 SharePoint Foundation                 Performance
9fx9       Medium              ...ender(HtmlTextWriter output)     at System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection
children)     at System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children)     at System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children)
at System.Web.UI.HtmlControls.HtmlContainerControl.Render(HtmlTextWriter writer)     at System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children)     at System.Web.UI.HtmlControls.HtmlForm.RenderChildren(HtmlTextWriter
writer)     at System.Web.UI.HtmlControls.HtmlForm.Render(HtmlTextWriter output)     at System.Web.UI.HtmlControls.HtmlForm.RenderControl(HtmlTextWriter writer)     at System.Web.UI.Control.RenderChildrenInternal(HtmlTextWrit...
b8d0b8ca-8386-441f-8fce-d79fe72556e1
06/13/2013 03:43:59.67*               w3wp.exe (0x263C)
0x24D8 SharePoint Foundation                 Performance
9fx9       Medium              ...er writer, ICollection children)     at System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer,
ICollection children)     at System.Web.UI.Page.Render(HtmlTextWriter writer)     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()     at System.Web.UI.Page.ProcessRequest(HttpContext context)
at Microsoft.SharePoint.Publishing.TemplateRedirectionPage.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     at System.Web.HttpApplication.ExecuteStep(IExecutionSte...
b8d0b8ca-8386-441f-8fce-d79fe72556e1
06/13/2013 03:43:59.67*               w3wp.exe (0x263C)
0x24D8 SharePoint Foundation                 Performance
9fx9       Medium              ...p step, Boolean& completedSynchronously)     at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception
error)     at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb)     at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)     at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr managedHttpContext,
IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)     at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr module...
b8d0b8ca-8386-441f-8fce-d79fe72556e1
06/13/2013 03:43:59.67*               w3wp.exe (0x263C)
0x24D8 SharePoint Foundation                 Performance
9fx9       Medium              ...Data, Int32 flags)     at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr managedHttpContext,
IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)                b8d0b8ca-8386-441f-8fce-d79fe72556e1
06/13/2013 03:43:59.67 w3wp.exe (0x263C)
0x24D8 SharePoint Foundation                 Performance                   g4zd
High       Performance degradation: note field [PublishingPageContent] was not in demoted fields.          b8d0b8ca-8386-441f-8fce-d79fe72556e1
Anybody has any idea whats going on? I need to fix this ASAP as we are suppose to go live in next few days.
Soumalya

Hello Soumalya,
Do you have an update on your issue? We are actually experiencing a similar issue at a new customer.
- Dennis | Netherlands | Blog |
Twitter

Field doesnu0092t display in alv , why ?

WHEN 'NETPR' .
      LS_FCAT-COLTEXT = TEXT-031 .
      LS_FCAT-COL_POS = 29.
      LS_FCAT-OUTPUTLEN = 15 .
    LS_FCAT-DATATYPE   = 'CURR' . "'QUAN'.
    LS_FCAT-rollname = 'NETPR'.
when the report is display , the field doesn't show up ?
also if i reduce the number of Columns ( in the field catalog )
for display there is no change
all the other fields are display except the "NETPR"
when i check the "layout change" he is there   ,
also he is display if i reduce the number of columne for display ( by layout change)

hi,
see this.
did u append the data to field catlog internal table also please check .
fieldcatalog-fieldname   = 'NETPR'.
fieldcatalog-seltext_m   = 'Net Price'.
fieldcatalog-col_pos     = 7.
fieldcatalog-outputlen   = 15.
fieldcatalog-do_sum      = 'X'        "Display column total
fieldcatalog-datatype     = 'CURR'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
Regards
Anver

Custom fields not display in SRM5.5 Basic Data Frame

Hello Everybody,
      I am working on SRM5.5 Server which i have to add two custom fields in Basic Data Frame..
     No field is display in basic data frame After I added those fields in INCL_EEW_PD_ITEM_CSF_SC and INCL_EEW_PD_ITEM_CSF.
    I added these fields by help of 672960 OSS notes..
   Add also when i execute the program BBP_DYNPROS_GENERATE where I entered the program name as SAPLBBP_PDH_CUF and execute but non of them is working fine..
Is there anything else do i need to display custom fields in basic data frame??
I have one more question..
When you logon through SAPGUI and goto BBPSC01 t.code where you see lots of fields in basic data frame such as unloading point and all.. But those all fields does not display when you logon through WebURL..
I checked is there any BAdi such CUF or Screenvarient or some Badi has been actived but non of the Badi has been implemented..
To display all the fields which are display in GUI Mode also should display in URL..
To bring this functionality , What do i need to do?
I appreciate if you answer these questions..
Thanks,
John.

Hi Disha,
We are trying to add custom fields to the Shopping Cart Header. We are using SRM 5.0. We added the fields to the structures "INCL_EEW_PD_HEADER_CSF_SC" & "INCL_EEW_PD_HEADER_CSF". We are able to see the custom fields. But the issue is , we are able to see the custom fields in the Shopping Cart one step shop scenario. Whereas when we run the wizard which is a 3 step scenario, we are not able to see the custom fields.
Technically speaking, the custom fields are visible for the ITS BBPSC01 & BBPSC03 , where as these custom fields are not visible for the ITS BBPSC02.
Please let me know, if we need to append the fields to some other structure to be able to see them in the Shopping cart wizard also.
I will be gald to provide any kind of info.
Thanks in advance...

Industry sector field for display only.

Dear All,
Does anybody know the setting to make Industry sector for display only, so that the enduser cannot change industry sector while creating material.
I know to hide industry sector from DEFAULTS menu, but i need to freeze that field for display only.
Regards
Rang

Hello Ranganath,
You can use transaction exit. for more information check this thread.
Industry sector (MBRSH) field in display mode.
Hope this helps.
Regards
Arif Mansuri

How to make 'Overall Limit' field as display only in ME22/ME22N

Hi,
I want to make the 'Overall Limit' field as display only in transation ME22/ME22N (only for Service Items).
I can make the field display only for ALL Service Items by going to:
SPRO u2013 IMG - Material Management - External Services Management - Define Screen Layout
and making the 'Overall Limit' display only for PT1 (Blanket Items). But this also stops any entry into this field even for creation of Purchase Orders! When I try the same thing for ME22 (Change Purchase Order) it does not work.

Hi
You can make it greyed out like this:
Go to materials management -> external service management -> define screen layout -> copy field selection key ME22 -> enter new key as ME22N -> choose category of field selection to 2 -> click on value limit -> make overall limit as display.
Then for Tcode ME22N, this field will be greyed out.
Thanks

"File Path and Name" field not displaying correctly

Post Author: DaveWoo
CA Forum: General
Hello,Here's my situation: I'm currently upgrading from Crystal Reports for Visual Studio .NET 2003 to Crystal Reports for Visual Studio 2005. I have several reports (programmatically generated using VB.NET) that use the "File Path and Name" special field. Now, in the old version of Crystal Reports (2003), the field properly displayed the original file path and name; however, in the new version (2005), the field displays as "C:\DOCUME1\Username\LOCALS1\Temp\Filename{F2459406-3719-4C8B-917C-4A7055A18C76}.tmp" - in other words, the location of the temporary .rpt file.How do I get the "File Path and Name" field to correctly display the path & name of the original file, like it did in the prior version?- Dave

This is a known issue tracked under ADAPT0000962216. At this time I do not know when this will be resolved, however Service Pack 2 for CR 2008 is targeted to be released by September and this may contain the fix.
Ludek

G/L Account Long Text Field in Display

Dear Sir,
I want G/L Account long text field be displayed along with G/L account number in G/L Account line item display report (FBL3N)
I cheched the layout, the option of G/L account number is available but option of G/L account Long text is not available.
Kindly guide me as to how can I do it?
Regards
Chirag Shah

You must do some development for it.
You can add additional field to FBL*N reports with using BTE exit.
First of all, if you don't use BTE before, you must create a product on FIBF.
Call FIBF transaction -> Settings -> Products -> ...of a customer
Create a new line,
Product: ZFI
Text: BTE Products for FI Exit
Product active: tick checks from activation.
Then you must call SE11 for structure RFPOS.
You must use append structure function for this structure and you can define ZFI_RFPOS append structure
Define 4 fields.
Component: KUNNR - Component type: KUNNR
Component: NAMED - Component type: NAME1
Component: LIFNR - Component type: LINFR
Component: NAMEK - Component type: NAME1
Then save and active your RFPOS structure.
After that, you must do same step for structure RFPOSX.
Then go to SE37 and copy from SAMPLE_INTERFACE_00001650 to ZFI_INTERFACE_00001650 FM.
After copy action, you must uncomment this line on ZFI_INTERFACE_00001650 FM's source code. It's very important;
E_POSTAB = I_POSTAB.
Then you should add some ABAP code for getting customer & vendor details.
I give you some examples, you can use it. (Next message on this thread, please check)
Then save and active FM.
Call FIBF transaction again.
FIBF -> Settings -> Process Modules -> ...of a customer
Define a new line.
Process: 00001650
Function Module: ZFI_INTERFACE_00001650
Product: ZFI
and this customizing.
Then you go to SE38 transaction.
start report RFPOSXEXTEND. After starting, a pop-up appears, you must click YES.
After those operations, you can see customer/vendor code and their names on FBL3N.
ABAP source example,
TABLES : bseg, kna1, lfa1.
IF sy-tcode = 'FBL3N'.
CLEAR: bseg.
SELECT SINGLE *
FROM bseg
WHERE bukrs = i_postab-bukrs
       AND belnr = i_postab-belnr
       AND gjahr = i_postab-gjahr
       AND koart = 'K'.
IF sy-subrc EQ 0.
    e_postab-lifnr = bseg-lifnr.
    CLEAR: lfa1.
    SELECT SINGLE *
    FROM lfa1
    WHERE lifnr = bseg-lifnr.
    IF sy-subrc EQ 0.
      e_postab-namek = lfa1-name1.
    ENDIF.
ENDIF.
CLEAR : bseg.
SELECT SINGLE *
FROM bseg
WHERE bukrs = i_postab-bukrs
       AND belnr = i_postab-belnr
       AND gjahr = i_postab-gjahr
       AND koart = 'D'.
IF sy-subrc EQ 0.
    e_postab-kunnr = bseg-kunnr.
    CLEAR: kna1.
    SELECT SINGLE *
    FROM kna1
    WHERE kunnr = bseg-kunnr.
    IF sy-subrc EQ 0.
      e_postab-named = kna1-name1.
    ENDIF.
ENDIF.
ENDIF.

Created By field shows display name.

Hi,
I have a SharePoint list and the created By Field exports as Display name when I export to excel. I would like to auto -populate a field in the SharePoint list that will auto populate the Field with display name of the field when an item is created.
How can I make this possible?
Thanks,
techie

hi
you need to use JavaScript code for the same.
<script src="/my/Style%20Library/jquery-1.11.2.js"></script><script language="javascript" src="/my/Style%20Library/jquery.SPServices-0.6.2.js" type="text/javascript"></script><script language="javascript"
type="text/javascript"> </script>
<script language="javascript" type="text/javascript">
$(document).ready(function() {
var userName= $().SPServices.SPGetCurrentUser();
$(".sp-peoplepicker-initialHelpText.ms-helperText").text("");
$(".sp-peoplepicker-topLevel").val(userName);
$(".sp-peoplepicker-topLevel").text(userName);
</script>
http://www.enjoysharepoint.com/Articles/Details/auto-populate-current-logged-in-user-name-in-sharepoint-2010-20799.aspx
http://www.enjoysharepoint.com/Articles/Details/auto-populate-current-logged-in-user-name-in-sharepoint-2010-20992.aspx
or set column deafault value as [Me]
http://sharepoint.stackexchange.com/questions/118932/sharepoint-2013-auto-populate-person-column-in-list-with-creator-name
Rajendra Singh
Walking on water and developing software from a specification are easy if both are frozen
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

Custom module pool + Amount field decimals display same as standard screen display

Hi All,
Requirement: A custom module program screen field has to be designed which displays decimal values of amount fields same as amount fields in standard screen.
Standard screen behavior: If the standard screen fields are observed, they refer to data elements WRBTR or AZSOL_F05A (transactions FB50/FB03/FB01). However, number of decimal places that are visible on screen are dependent on the currency that is provided.
Both the data elements have 2 decimal places.
For currency USD two decimal places are displayed - in TCURX - decimal places are two.
For currency JPY or CLP - zero decimal places are displayed - in TCURX - decimal places are zero.
i.e., even though the screen field refers to data element or domain that has the characteristic to show 2 decimal places, based on currency, decimal places are adjusted.
I would like to know how this is happening on standard screen fields.
Solution Required for: How to make the custom screen amounts to display same number of decimal places as standard screen amount fields.
P.S: Before posting the query here, research has been done in SDN and other places. It has been identified that quantity fields adjustments are discussed. However for amount field even though discussed earlier, did not reach a conclusion.
I would like to get a solution for this one.
Thanks in advance.
Goutham.

Thank you all for taking time to take a look at this query.
This issue has been resolved.
Resolution: If the standard transactions (FI transactions in specific) are observed, whenever there is a field that displays amount value, there will be a corresponding field (may not be beside the amount field, somewhere on the screen or in the same sequence of screens) where the currency key value would be entered.
For instance, if you look at FB50 - there is field on top for the user to input currency key value (like USD or CLP or INR).
When any amount field is declared - this currency key field is provided as the reference field in the screen attributes of the amount field.
In short, in the custom module pool program, provide a field that holds currency key value and use this field as reference field for the amount fields.
Do repond to this thread if the resolution is not clear.
Thank you all once again.
Goutham.

MultiSelect field is displayed extra wide in IdM UI after Portal update (IdM 7.2 SP8)

Similar Messages

Maybe you are looking for