MultiServer Monitor Works on one PC and not another??

Super strange, but I have two PCs at my desk. On one of them I can log into a CF 8 server and bring up the MultiServer Monitor and add all my CF 8 Servers and it works great. On my other PC (the one I setup JUST to display the Monitor all day) it always says Permission Denied for all the servers. The server I connect to and the credentials used are identical in both cases. Also, both PCs are on the same subnet (not on the same subnet as the servers). Anyone got any ideas?? Notice that in both screen shots (one from each PCs browser) the URL is the same and I've keyed the username/password used on the failing workstation more than a dozen times to make sure I'm keying it correctly. I've even copied and pasted it so I know it is correct. Thanks for any input.

When you upgraded, did you remove the first install? I can't think of a reason off-hand, but have screwed up java before, and an update file may not overwrite the messed uyp part. just a thought, tah.
--Jon Baumann

Similar Messages

c:set works in one page and not another.. rediculous problem

Hi all,
im having one hell of a strange problem..
i have this bit of code on one page..
profile_body.jsp
<jsp:useBean id="user" scope="request" beanName="com.insaini.publogs.business.UserBean" type="com.insaini.publogs.business.ProfileInterface" />
<jsp:setProperty name="user" property="user" value="<%=request.getRemoteUser()%>" />
<c:set value="${user.profile}" var="profile" />and i have this in my editProfile_body.jsp
<jsp:useBean id="location" scope="request" beanName="com.insaini.publogs.business.LocationBean" type="com.insaini.publogs.struts.listeners.LocationListener" />
<jsp:useBean id="org" scope="request" beanName="com.insaini.publogs.business.OrganizationBean" type="com.insaini.publogs.struts.listeners.OrganizationListener" />
<jsp:useBean id="user" scope="request" beanName="com.insaini.publogs.business.UserBean" type="com.insaini.publogs.business.ProfileInterface" />
<jsp:setProperty name="user" property="user" value="<%=request.getRemoteUser()%>" />
<c:set value="${user.profile}" var="profile" />the profile_body.jsp loads fine.. but the editProfile_body.jsp does not load at all and its throwing this error..
An error occurred at line: 17 in the jsp file: /jsp/includes/editProfile_body.jsp
Generated servlet error:
org.apache cannot be resolved or is not a field
where line 17 points to
<jsp:setProperty name="user" property="user" value="<%=request.getRemoteUser()%>" />
this makes absolutely no sense since this exact same line works in the profile_body.jsp..
any ideas?

I think the problem is that you have an object in scope that has the name "org". Then, somewhere in the Java Code generated by the offending jsp:setProperty tag, there is a line that looks like:
xxx = org.apache...
What ends up happening is Java is looking in the object you have named org for a public (or otherwise visible) member named apache, and not finding it.
This is a naming conflict, and gets resolved by renaming the <jsp:useBean id="org" object to something else (preferrably something other name org, com, net, or any other package name your system might have).

Why does new Skype work with one user, and not another?

Running 19.4.5, I installed the latest version of Skype. (I do not activate it on login) This opens, but crshes/unexspectedly quits on "sign in". I tried the same with a "new user", and the app opened fine. I compared the two users to make sure that Skype was correctly featured in my usual user. No difference. Still crashes.
Does anyone have an idea what could be conflicting with Skype?

Right, problem solved! . Am posting this as it may help in future. I use a useful little app called Window Dragon,(a haxie) which helps resize windows with the mouse. This was causing the conflict, but had not with earlier versions of Skype. All I had to do was exclude Window Dragon from working with the new updated version of Skype and everything back to normal.
Solutions to apps that "quit unexpectedly" or crash often mention that haxies can often come into conflict with apps. So best to start with any haxies one has installed, disable, test etc..

IMessage works in one network and not another...

Since I installed it I couldn't get iMessage Beta to work on my Mac at home. When I used it at work today, it worked perfectly. But now I'm back home and can't get it to work. Factime isn't working either. What's going on?

Hi,
In System Preferences <> Network > Advanced Button > DNS tab add the DNS server 8.8.8.8 (it's a Google Public one)
It seems some DNS servers are not working well with this.
10:36 PM Tuesday; February 28, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Send email works for one user and not another ?!

Hi there
Am Apex Newbie and am developing in-house helpdesk / ticket / call logging / issue tracker type system ..
Am putting final bells and whistles on app like sending email on raising of a problem. This is being done via Apex_Mail using new Send Email page process attached to a button.
I.e it's not being done via UTL_SMTP explicitly in a trigger or anything.
Here's the problem for userA the sending of email works perfectly for userB it doesn't work .. does anyone have any suggestions as to what may be wrong ?
I thought I read somewhere that UTL_SMTP wasn't granted publicly in Apex and had to be explicitly given to individual users but I may well be mistaken.
Any help / suggestions gratefully received .. all I can think of doing is logging onto Apex Admin and looking at the mail queue and see if that will give me any clue but Apex Admin is not really my bag per se ?!
Thanks in advance
Wiggywig

Hi,
Can you see any error from Apex logs?
Check mail queue and mail log
http://download.oracle.com/docs/cd/E17556_01/doc/admin.40/e15521/adm_mg_service_set.htm#sthref348
What email address you use in From field?
Somehow I think this relates more to SMTP server policy about sender than Apex.
Regards,
Jari

I just bought a cit 200 for my other house. It works on one computer and not another

Anyone have a CIT200 Linksys Skype phone? I've narrowed the problem down to one computer. When using on another computer it worked, the computer recognized the hardware. On the other computer, it doesn't recognize the hardware. Have loaded and reloaded the driver innumerable times using different usb ports etc. Could there be a virus. I've seen that before with hardware. Any ideas? Help!!!

could be your computer's firewall is preventing the proper installation of your CIT200. try disabling and reinstalling the drivers again.
"Don't fix it if it ain't broken."

Auto To working for one material and not working for other material

Hi,
Hope everybody is doing fine.
I have configured the auto TO. Its working fine for one material and not working for the other material. I checked the material master and wm 1,2 views have the same fileds / values. What could be wrong?
I didn't setup the back ground processing job. Is that is affecting it?
thanks for any help.
regrads,
KHAN

Thnaks,
You are right but then what could be wrong? Its working for one material and not working for otehr material? Any clue?
Appreciate your time charlie

Prgrmatic viewlink setting for hgrid is working for one level and not remai

Hi All,
I have create 2 VO objects dynamicaly and created 2 VL's dynamically .I have a static HGrid.and iam setting viewlinks dynamically.It is working for 1 level but not another leve..For Example.. Grid id displaying projects to Tasks but not tasks to subtasks.
here is my code
public void createViewLink(){
OADBTransaction dbTransaction=getOADBTransaction();
OAViewObject obj = (OAViewObject)this.findViewObject("TestProjects1VO1");
OAViewObject obj1 = (OAViewObject)this.findViewObject("TestTasks1VO1");
AttributeDef[] prjLinkAttrs = new AttributeDef[] { obj.findAttributeDef("ProjectId") };
AttributeDef[] taskLinkAttrs = new AttributeDef[] { obj1.findAttributeDef("ProjectId") };
ViewLink vl = createViewLinkBetweenViewObjects("TestPrjToTestTasksVL","TestPrjToTasksAcc",
obj,prjLinkAttrs,obj1,taskLinkAttrs,null);
//OAViewObject obj3 = (OAViewObject)this.findViewObject("TestTasks1VO1");
OAViewObject obj2 = (OAViewObject)this.findViewObject("TestRecTasks1VO1");
AttributeDef[] taskAttrs = new AttributeDef[] { obj1.findAttributeDef("TaskId") };
AttributeDef[] parentTaskAttrs = new AttributeDef[] { obj2.findAttributeDef("ParentTaskId") };
ViewLink vl1 = createViewLinkBetweenViewObjects("TaskToTestTasksVL","TaskToTasksAcc",
obj1,taskAttrs,obj2,parentTaskAttrs,null);
OAHGridBean hgrid=(OAHGridBean)webBean.findChildRecursive("HGridRN");
OAHGridHierarchyBean hgridHierarchy = (OAHGridHierarchyBean)hgrid.findChildRecursive("TreeRN");
OATreeLevelBean treeChild = (OATreeLevelBean)hgridHierarchy.findChildRecursive("TreeRN");
OAWebBean nodeDef1 = (OAWebBean)treeChild.findChildRecursive("nodeDef1");
nodeDef1.setViewUsageName("TestProjects1VO1");
nodeDef1.setViewAttributeName("ProjectName");
OATreeChildBean childNode1 = (OATreeChildBean)treeChild.findChildRecursive("childNode1");
childNode1.setAttributeValue(VIEW_LINK_NAME,"TestPrjToTestTasksVL");
childNode1.setAttributeValue(VL_ACCESSOR_NAME_ATTR,"TestPrjToTasksAcc");
OAWebBean nodeDef2 = (OAWebBean)childNode1.findIndexedChild(childNode1,"nodeDef2");
nodeDef2.setAttributeValue(VIEW_USAGE_NAME, "TestTasks1VO1");
nodeDef2.setAttributeValue(VIEW_ATTRIBUTE_NAME,"TaskName");
%%%%%%%%%%%%%%%Till Here grid is getting data%%%%%%%%%%%%
This node is not getting data............i.e sub tasks are not getting data
OATreeChildBean childNode2 = (OATreeChildBean)childNode1.findIndexedChildRecursive("childNode2");
childNode2.setAttributeValue(VIEW_LINK_NAME,"TaskToTestTasksVL1");
childNode2.setAttributeValue(VL_ACCESSOR_NAME_ATTR,"TaskToTasksAcc");
OAWebBean nodeDef3 = (OAWebBean)childNode2.findIndexedChild(childNode2,"nodeDef3");
nodeDef3.setAttributeValue(VIEW_USAGE_NAME, "TestRecTasks1VO1");
nodeDef3.setAttributeValue(VIEW_ATTRIBUTE_NAME,"TaskName");
Please help me .. ihave spent my whole daya on this issue.
Thanks
Soujanya

Sure Sumit.
OADBTransaction dbTransaction=getOADBTransaction();
OAViewObject obj = (OAViewObject)this.findViewObject("TestProjects1VO1");
OAViewObject obj1 = (OAViewObject)this.findViewObject("TestTasks1VO1");
OAViewObject obj2 = (OAViewObject)this.findViewObject("TestRecTasks1VO1");
// OAViewObject obj3 = (OAViewObject)this.findViewObject("RecTasks1VO1");
AttributeDef[] prjLinkAttrs = new AttributeDef[] { obj.findAttributeDef("ProjectId") };
AttributeDef[] taskLinkAttrs = new AttributeDef[] { obj1.findAttributeDef("ProjectId") };
ViewLink vl = createViewLinkBetweenViewObjects("TestPrjToTestTasksVL","TestPrjToTasksAcc",
obj,prjLinkAttrs,obj1,taskLinkAttrs,null);
AttributeDef[] taskAttrs = new AttributeDef[] { obj1.findAttributeDef("TaskId") };
AttributeDef[] parentTaskAttrs = new AttributeDef[] { obj2.findAttributeDef("ParentTaskId") };
*************This cide was missing ...********************************
/* Retrieve the first row of the master rowset */
Row firstDept = obj.first();
/* Get iterator over details collection via the view link accessor attribute */
RowSetIterator empsInDeptRowSet = (RowSetIterator)firstDept.getAttribute("TestPrjToTasksAcc");
/* Get view object created by the framework to handle view link traversal */
ViewObject viewObjectForAccessorRowSet = empsInDeptRowSet.getRowSet().getViewObject();
/* Now, create the 2nd-level detail between this view object, and reports */
*************This cide was missing ...********************************
ViewLink vl1 = createViewLinkBetweenViewObjects("TaskToTestTasksVL","TaskToTasksAcc",
viewObjectForAccessorRowSet ,taskAttrs,obj2,parentTaskAttrs,null);
I the above vl1 i gave obj1 before .. that was the difference...BAsically using the accessor ... if we give as source for next levevl .. it worked.
Both ViewLinks were separate and now there is a link ............ :)
Now iam facing problem for recursion ......... :)
Soujanya

Implicit read with assembly module instance working on one computer, but not another

Hi,
I'm trying to set up an on-site computer to run a VI which uses assembly instances for data communication, but for some reason I'm unable to establish a connection to the PLC.
I'm running the example vi "CreateAssemblyInstance.vi" to try and get the communication set up before I start using my actual program.
When I run this code on my development machine, I'm able to establish a connection to the PLC and read data. I then go into RSLogix 5000 and change the IP address to the on-site machine and try to run the test VI there, but I'm unable to make a connection. LabVIEW-side, the program thinks that it's established a connection and is reading/writing data, but PLC-side I'm getting a "Connection Failed" message in RSLogix.
I find it weird that LabVIEW thinks the connection was established just fine, which the RSLogix says it can't connect to the VI.
Just wondering if anyone else has had this happen. We aren't sure why the same VI runs on one machine but not another. We used RSLogix to change the IP address of the target machine, so we don't think that's the issue. And both computers are on the same network, so we don't think it's a firewall issue either.
LabVIEW-side, things should be identical. I'm running the same example VI that came with the Ethernet/IP module. PLC-side, we're changing the target IP of the module within RSLogix 5000 (and we're sending the updated information to the PLC) to match the machine we're trying to make a connection with. Are we missing any steps? This is the first time we've tried using an assembly module, so we're having a hard time troubleshooting.
Any ideas on why this is happening?

I'm pretty sure we're using a generic ethernet module:
I can communicate explicitly with the problem computer, it's able to use 'Tag Read' and 'Tag Write' to communicate with the PLC.
We started having another problem just recently too. The Tag Read and Write commands are almost always timing out. I keep getting the error message -251723752:
Detailed error info: Error -251723752 occurred at EthernetIP Tag Read REAL.vi;Details: The request response was not received in the requested timeout period Possible reason(s): Ethernet/IP Industrial Protocol: (Hex 0xF0FF0018) The request response was not received in the requested timeout period
I can't figure out what's causing this all of a sudden, could these issues be related?

XML Query works on one database and not working on others with errLPX-00241

I have one query as below
SELECT EXTRACTVALUE
(VALUE (xml_node),
'/inspectionActivityArtifact/ns2:landfillTypes/ns2:type[position()=1]',
'xmlns:ns2="http://dwm.sw.xmlNamespace/InspectionActivity"'
) AS TEST
FROM artifacts a,TABLE (XMLSEQUENCE ((XMLTYPE (NVL (artifact_data, '<empty></empty>'))))) xml_node
this works well on other databases but not working on one database. Everything is same configuration and OS and everything.
I can work on other XML parsing which is working fine but not this query.
Any idea ?
Viral Dave

post versions and patch levels for both databases eg 10.2.0.1.0 and the error message you are getting.

GL security works for one report and not for other report.

Hi everybody,
We have setup GL security and for our discoverer reports we are calling
APPS.GL_SECURITY_PKG.VALIDATE_ACCESS( sl.SET_OF_BOOKS_ID,gl.CODE_COMBINATION_ID ) = 'TRUE' in the query.
Now among 3 reports, 2 are working fine but one report is not showing any data if i use the above condition.
Hint: That particular report is based on a Materialized view.
Any ideas??
Thank you
--Kumar

Hi Rod,
Thanks for your reply but when i try to use the where
condition in the folder in Admin, its not recognizing the Apps.GL_SECURITY_PKG.VALIDATE_ACCESS....
Any Suggestion on this?
Thank you
--Kumar

PO approval hierarchy working on one user and not on other

Hi all,
I am using an approval hierarchy with one preparer and one approver for Purchase order and requisition.
User A is preparer and User B approver.
Requisition hierarchy is doing fine but the Purchase Order Hierarchy gives this error on forewarding the PO..:: " PO Approval Top Process : Error, Wait for Concurrent Programme"
If i assign a different user to this Preparer, the process works fine.
What am i doing worng or what issue am i over looking.
Thanks in Advance.

Found the solution.
Apperently on this installation, my preset named RegularExport should be found with name [RegularExport].
Strange that this works on on installation.

I have 2 ipad 2s. On the newer one I can log in and update to IOS 5 with no problem. On the older one I get the message "Your Apple ID has been disabled." Why does it work on one ipad and not on the other?

I have 2 ipad 2s. On the newer one I could log in and update to IOS 5 withno problem. On the older one I get the message "Your Apple ID has been disabled." No other explanation. Why can I log in on one ipad and I'm disabled on the other?

Well, I spoke too soon. Yes, I'm using the same account on both iPads, but I just changed my password for the umpteenth time and now I get the disabled message on both iPads. Just yesterday I was able to upgrade one to IOS 5 but got the error message on the other. I'm getting more confused by the minute.

Downloading a file via a procedure works in one app but not another

Obviously I've overlooked something. I have this procedure (following). It works in one application that has been running for a couple years. It is called from Column Link with this value #OWNER#.DOWNLOAD_ATTACHED_FILES?p_file=#DOWNLOAD_LINK#
I'm now making a new application and want the same facility but this same procedure gives me a page not found error even though the error page URL looks like: .../apex/GMCTRL.DOWNLOAD_ATTACHED_FILES?p_file=42 which seems to me that it should work correctly. (the row with the value 42 does exist in the DB)
Is there a setting/flag/thing that I have to set to make this work in my new application that I've overlooked? (both are APEX 3.1.1 and oracle 11g)
create or replace PROCEDURE "DOWNLOAD_ATTACHED_FILES" (p_file in number) AS
v_mime VARCHAR2(48);
v_length NUMBER;
v_file_name VARCHAR2(2000);
Lob_loc BLOB;
BEGIN
SELECT MIME_TYPE, RPT_DOCUMENT_BLOB_IMG, RPT_DOCUMENT_FILE_NAME_TX, DBMS_LOB.GETLENGTH(RPT_DOCUMENT_BLOB_IMG)
INTO v_mime, lob_loc,v_file_name,v_length
FROM RPT_DOCUMENT_BLOB
WHERE RPT_DOCUMENT_BLOB_ID = p_file;
owa_util.mime_header( nvl(v_mime,'application/octet'), FALSE );
htp.p('Content-length: ' || v_length);
htp.p('Content-Disposition: attachment; filename="'||substr(v_file_name,instr(v_file_name,'/')+1)|| '"');
owa_util.http_header_close;
wpg_docload.download_file( Lob_loc );
end download_attached_files;

Hello:
Ensure that
GMCTRL.DOWNLOAD_ATTACHED_FILES is executable by oracle account used by APEX to connect to the database (apex_public_user or anonymous)
GMCTRL.DOWNLOAD_ATTACHED_FILES is included into 'WWV_FLOW_EPG_INCLUDE_MOD_LOCAL' as an authorized procedure. See Re: link can't find a stored procedure
Varad

Synaptics touchpad on 4540s works for one person but not another

The Synaptics touchpad on my ProBook 4540s (Win 7) works normally when I use it but when my wife tries to use it, the touchpad is unresponsive after a very slight initial cursor movement.  (Anticipating replies - Yes, she casts a shadow, pictures of her come out normally, and she has a visible reflection in a mirror.)     The touchpad sensitivity setting is maxed on light touch and cursor speed is maxed.
She has relatively small hands, and long nails, but she had no difficulty using the touchpad on our old HP dv9910us and has no problem with an iPad touchscreen.  This week she tried the touchpad on a Sony VAIO that was so worn most of the original surface coating is gone, and had no problem moving the cursor on that machine either.   She even tried the awkward solution of using her knuckle instead of her fingertip on the HP in case her nails were getting in the way, but that didn't work either.
Not having used a 4540s before, and not having access to another one to compare, I have no way to tell whether this is a bad individual touchpad unit or a design issue.   If a design issue, what's the workaround?     For instance, is there a skin I can put on the touchpad to increase its conductivity?

A friend of mine bought a ProBook 4540s yesterday. At Microcenter we noticed that the touch pad often would stop working for her, and sometimes for me, but it usually worked for me. She bought the laptop, and we she got it home we noticed the same problem. I played with the touchpad a little and noticed this pad has a very narrow window of operation. With the 14.1" HP's like the nc6220 or nc6400, you can use one finger, two fingers, even three fingers, and the mouse responds nicely. However if too much surface area is in contact with the touchpad of the 4540s it doesn't work. Too much surface area is the pad of your finger. Because my friend has long nails, she was laying her finger pretty flat on the touch pad, and it wouldn't work. When I used the pad like this it wouldn't work for me either. Because I have short finger nails I have always used the lower end of my tip. This works pretty well with the 4540s. Pressure seems to have little affect. It is a matter of surface area, and the acceptable area has a small range!

MultiServer Monitor Works on one PC and not another??

Similar Messages

Maybe you are looking for