Multisim model for the semicron AN-8005 module

Does anyone have a multisim model for the semicron AN-8005 module, this is an IBGT Power Electronics Teaching System Principle for sizing power converters. Or a model that has the same functional in- and outputs? I am using the hardware in a didactic setup for my thesis and would like to test my LAbview code through a simulation in Multisim.
Attachments:
AN-8005-Teaching-System.pdf ‏2020 KB

Hi GeoffreyDS,
I have searched to see if I could find a model for the product you mentioned, but have been unable to do so. Have you tried contacting the manufacturer?
Regards,
Al C
National Instruments,
Application Engineer

Similar Messages

Excel, PowerView error in SharePoint 2013: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source."

I've installed SQL Server 2012 SP1 + SP server 2012 + SSRS and PowerPivot add-in.
I also configured excel services correctly. Everything works fine but the powerview doesn't work!
While I open an excel workbook consist of a PowerView report an error occurs: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions
to access the data source."
error detail:
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">An
error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3128.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the
data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source></Source><Message>For more information about this error navigate
to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
Please help me to solve this issue. I don't know if uploading the excel workbook is enough or maybe It needed to connect to another data source.
I Appreciate in advance.

Hi Ali.y,
Based on the current error message, the error can be related to the
Claims to Windows Token Service (C2WTS) and is an expected error under certain conditions. To verify the issue, please check the aspects below:
     1. The C2WTS Windows service and C2WTS SharePoint service are both running.
     2. Check the SQL Server Browser service is running on the machine that has the PowerPivot instance of SSAS.
     3. Check the domain. You're signing into SharePoint with a user account in some domain (call it Domain A). When Domain A is equal to Domain B which SharePoint server itself is located (they're the same domain), or Domain
A trusts Domain B.
In addition, the error may be caused by Kerberos authentication issue due to missing SPN. In order to make the Kerberos authentication work, you need to configure the Analysis Services to run under a domain account, and register the SPNs for the Analysis
Services server.
To create the SPN for the Analysis Services server that is running under a domain account, run the following commands at a command prompt:
• Setspn.exe -S MSOLAPSvc.3/Fully_Qualified_domainName OLAP_Service_Startup_Account
Note: Fully_Qualified_domainName is a placeholder for the FQDN.
• Setspn.exe -S MSOLAPSvc.3/serverHostName OLAP_Service_Startup_Account
For more information, please see:
How to configure SQL Reporting Services 2012 in SharePoint Server 2010 / 2013 for Kerberos authentication
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

An error occurred while loading the model for the item or data source 'EntityDataSource'.

Hi Team,
We are trying to configure the Power View in SharePoint 2013. We did the entire configuration by following below steps. When we open the excel workbook (2013) containing
Power View sheet (using excel web services) deployed in SharePoint Document library, we get the below error.
“An error occurred while loading the model for the item or data source
'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.”
Steps followed for configuring Power View in SharePoint Server 2013 (Single Machine setup):
Installed SharePoint Server 2013 Enterprise edition
Did not configure it at this time
Installed SQL Server 2012 with default instance installation (selected every features)
Later installed SP1 for SQL Server 2012
After that installed Analysis Server in SharePoint mode (SQL Server PowerPivot for SharePoint)
Again installed another Analysis Server and selected the tabular mode of data model
Then ran the configuration wizard of Share point 2013 for farm configuration (only for central admin creation)
Later we ran the PowerPivot for SharePoint 2013 (spPowerpivot.msi)
Then using the Power Pivot Configuration tool for 2013 and completed all the steps and configured the excel service and registered the above two analysis service instances.
Questions/Doubts are:
Is our steps followed as mentioned above is correct for configuring Power View in SharePoint Server 2013 Enterprise edition?
Is the SQL Server 2012 Enterprise edition with SP1 installed is sufficient to view Power View sheets in SharePoint 2013 or we need to use the SQL Server 2012 SP1
CTP3 software for Power View feature as mentioned in the below link.
http://technet.microsoft.com/en-us/library/jj219634.aspx
but we don’t have an option to download CTP3 software now from Microsoft site
Or do we need to install
Microsoft SQL Server 2012 With Power View For Multidimensional Models
CTP
http://www.microsoft.com/en-sg/download/details.aspx?id=35822
Few blogs says that SQL Server 2012 instance should have been installed with SP1 at one go (not seperately).
http://www.microsoft.com/en-in/download/details.aspx?id=35575
Error detail :
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message
xmlns="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access
the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3000.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access
the data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source>Microsoft.AnalysisServices.SPClient</Source><Message>We
cannot locate a server to load the workbook Data Model.</Message><MoreInformation><Source></Source><Message>We cannot locate a server to load the workbook Data Model.</Message><MoreInformation><Source>Microsoft.Office.Excel.Server.WebServices</Source><Message>We
cannot locate a server to load the workbook Data Model.</Message></MoreInformation></MoreInformation></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices"
/></detail>
Please help me in configuring Power View for SharePoint 2013.
Thanks in advance.
Pavan Kumar

I'll bet that I know the answer to this one - and you probably won't like it ;)
Here's the telling portion of that error: "We cannot locate a server to load the workbook Data Model."
This error is thrown in two scenarios; the first, when you haven't registered an analysis server. The second appears to be the issue you're having:
PowerPivot requires SQL Server 2012 SP1. Microsoft issued a release of SQL Server 2012 SP1 that really wasn't SP1...
Check the version of SQL that you are running. It should be version 11.0.3000 or greater. If it's not, you have the wrong "SP1" installed. The correct one is
here.
Here's the bad news- you can't simply redeploy the correct one... because the installer already thinks that SP1 is installed. You'll have to backup (or detach and copy) your databases, then re-install SQL with the correct SP1, then restore or reattach
the databases. Once you've done that, PowerPivot and PowerView will work properly.
I sincerely hope this resolves your issues - we wasted TWO WEEKS of our time with this problem!

Unable to get the SharePoint 2013 List names using Client object model for the input URL

Please can you help with this issue.
We are not able to get the SharePoint 2013 List names using Client object model for the input URL.
What we need is to use default credentials to authenticate user to get only those list which he has access to.
clientContext.Credentials = Net.CredentialCache.DefaultCredentials
But in this case we are getting error saying ‘The remote server returned an error: (401) Unauthorized.’
Instead of passing Default Credentials, if we pass the User credentials using:
clientContext.Credentials = New Net.NetworkCredential("Administrator", "password", "contoso")
It authenticates the user and works fine. Since we are developing a web part, it would not be possible to pass the user credentials. Also, the sample source code works perfectly fine on the SharePoint 2010 environment. We need to get the same functionality
working for SharePoint 2013.
We are also facing the same issue while authenticating PSI(Project Server Interface) Web services for Project Server 2013.
Can you please let us know how we can overcome the above issue? Please let us know if you need any further information from our end on the same.
Sample code is here: http://www.projectsolution.com/Data/Support/MS/SharePointTestApplication.zip
Regards, PJ Mistry (Email: [email protected] | Web: http://www.projectsolution.co.uk | Blog: EPMGuy.com)

Hi Mistry,
I sure that CSOM will authenticate without passing the
"clientContext.Credentials = Net.CredentialCache.DefaultCredentials" by default. It will take the current login user credentials by default. For more details about the CSOM operations refer the below link.
http://msdn.microsoft.com/en-us/library/office/fp179912.aspx
-- Vadivelu B Life with SharePoint

Error (Data mining): The specified mining structure does not contain a valid model for the current task.

I'm trying to run the Cross validation report on a mining structure that contains just Microsoft Association Rules mining model. In Target Attribute, I've tried:
Actual(Service Description).SE value
Actual([Service Description]).[SE value]
Actual(Service Description)
Actual([Service Description])
just because i don't know what is the exact correct format, but none of them worked, and I always get the following error:
Error (Data mining): The specified mining structure does not contain a valid model for the current task.
the following is my mining model structure

Association rules does not allow for cross-validation
Mark Tabladillo PhD (MVP, SAS Expert; MCT, MCITP, MCAD .NET) http://www.marktab.net

F4 help for the screen fields in module pool program

Hi All,
I have a requirement that, i want to provide F4 help for the 2 fields in module pool program. the fields are document number and fiscal year from rbkp table.
i could provide search help for two fields.
but how to select matching fiscal year for that document number.
problem: i am getting fiscal year as first four digits of document number.
please help me to solve this problem.
Thanks & Regards,
Namratha.V

Hi,
If your requirement is after selecting the document no from f4 help then the corresponding year should be updated in the document year field then use FM --> DYNP_VALUES_UPDATE
In this function module pass the screen no program & field for which u want to update value

Distribution Model for the Message

want to create a filter for my Distribution Model for the Message Type HRMD_A .
The filtering should be based on Company Code .
I'm getting only infotypes but now should I filter based on Field BUKRS ?

1. Go to Tcode BD59.
2. Create a Custom ALE Object Type
3. Specify the corresponding Segment name where BUKRS exists and the Field Name as BUKRS.

Tcode for the execution of function module

Hi!
A very simple question:
What is the Tcode for the execution of function module? (Se38,???)
I have to execute the function module RRSI_INITIAL_LINE_INSERT with import parameter I_CHABASNM = 0REQUID.
Thank you very much!
regards
Thom

hi,
You create new or edit Fm in SE37. You also put the code for that FM in SE37.
You can call it through pattern button in SE38, where u pass the importing and exporting parameters of that Fm
Hope this helps, Do rewad.

Replacement Model for the discontinued HP Photosmart C4783 All-in-One Printer

Hello,
Can anyone tell if there is a very similar replacement model for the C4783? I need the same forn factor.

I am not sure you can find replacement models for this printer but I will do my best to find out. The entire product line for Photosmart C4600 and C4700 are the last models to use that same printer shape and size. I checked for compatible printers that used that kind of ink and none even looked like the same kind of printer. The next generation was the Photosmart D110 which would have been the possible upgraded version of this printer but it is hard to say if it is going to have the same "forn factor."
Are you referring to the form factor as the chassis or as an electrical component? I found your exact model of printer at the HP Parts Store listed as a replacement model (product #: Q8380B) suggesting to contact one of these available resellers. I hope this answers your questions. If not, define forn factor and hopefully I can help you more.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Integration Model for the resources terminates with an error

Hi
we have deleted the existing Integration model for the Resources and trying to create a newones, when iam activating the new resource integration model it is terminating with an error "Resource already exists(mapping error occured)".
we did the consistency check for the resources and ran OM17 everything seems OK. when tried to the same in the test system it works fine...
How to rectify this..

5,
Deleting integration models for master data is a poor way to start any process.
The message implies that the offending resource probably was created locally in SCM, or perhaps to support a different Business System Group. The easiest solution is to delete the resource and then recreate via Core Interface.
Best Regards,
DB49

How to create the select option for the Plant in screen (Module pool)

HI,
I am developing one module pool program and I have below requirement,
currently plant is acting like PARAMETER and the now it should be changed to select option.
how to create the select option in the screen
Thanks and regarding,
Malla
Moderator message - Cross post locked
Edited by: Rob Burbank on Dec 16, 2009 1:41 PM

Steps to get SELECT-OPTIONS in module pool programs.
1.Start one dialog program with SAPMZ_001.
Place the below code in the TOP include of the dialog program.
TABLES marc.
SELECTION-SCREEN BEGIN OF SCREEN 3200 AS SUBSCREEN.
SELECT-OPTIONS: werks FOR marc-werks.
SELECTION-SCREEN END OF SCREEN 3200.
2 .Create one screen 3000.
Go to Layout of the screen and Define subscreen area on the screen and Name it as l_subscreen.
Place the below code in the Flow logic of the screen.
PROCESS BEFORE OUTPUT.
CALL SUBSCREEN l_subscreen INCLUDING 'SAPMZ_001' '3200'.
PROCESS AFTER INPUT.
CALL SUBSCREEN l_subscreen.
Activate all.
Create Transaction code for the dialog program .
Execute the transaction code. You will see the select-option for werks how we see on Selection-screen.

How can I set the timebase in the FPGA API for the NI 9853 CAN module?

Hallo,
is there anybody familiar with cRIO, especially the NI CAN 9853 Modul?
When starting communication with a CAN Bus you can get a receiving CAN Frames from the FPGA I/O Node with a timestamp.
How can I set this timebase in the CAN Controller, because the CAN communication starts every time with the same timebase.
Compared to the CAN API on a PC the timebase for the communication is set when the Open Frame API VI is used?
From that time the CAN Contoller assume the timebase from the PC.
Whats about the FPGA API?
Martin

Hallo Dirk,
thanks you
for your answerer regarding my question.
The last
question belongs to my intention, to get absolute Timestamps from the NI 9853
CAN interface. As you said it always starts from zero when starting the
application.
For my application
I would like to get a timestamp with the local time I start the CAN communication
and every CAN Frame should be logged with the Timestamp it is actually send on
the CAN BUS.
How can I achieve
it?
My first
thoughts were to add up the timestamp for every CAN Frame counted from zero to
an absolute Timestamp when starting communication. But I have got some wrong values.
Maybe I did something wrong using the high and low part of the Timestamps I got
from the CAN API.
Do you have
a suggestion for me?
MartinW

Reference information model for the manufacturing industry?

Hello,
Do anybody know about some kind of reference information model in the manufactoring industry or any organization that are working on devloping this (doesn't have to be for the full information landscape, could be for bits and picees)?
Thanks for your help and support,
Markus Johansson

Hi Markus,
There is a project plan for manufacturing on master data. Check this out:
http://searchmanufacturingerp.techtarget.com/news/article/0,289142,sid193_gci1360459,00.html
Some info you can see this docs also:
http://searchmanufacturingerp.techtarget.com/news/article/0,289142,sid193_gci1360448,00.html
http://searchmanufacturingerp.techtarget.com/news/article/0,289142,sid193_gci1360466,00.html
Regards,
---Satish

Not allowed to buy TV model for the advertised price

My current TV stopped working and I found on BestBuy.com a Samsung 55" 1080p Smart 3D model that asked for my name and email before I could receive a price. Once doing so I was told the 55" was no longer available, so I tried the 60" and was quoted $1104.99 (SKU:4327014). I decided to stop by my local store (New Hope Commons, Durham, NC) who said they were out of stock for that SKU and didn't have a like comparison for under $1,200.
Before leaving the store, I decided to purchase what I had in my online cart from my phone. Checkout would not complete the order stating item not available for shipping to your store. So I tried a different store and tried shipping to my home address. I could not find a store in my state, that it would ship. So I called the customer service number and was told that model is no longer available in my region. Even though the site asked for my information before I continued to check out and had some basis for inventory since it knew that the 55" I originally wanted, was not available.
While the customer service rep was looking up similar models for an alternative, I walked passed a Samsung 55" 1080p Smart 3D on the wall as a display unit being sold as an open item for $1439 (SKU:4323036). During the "negotiation" over the next 30 min, with me attempting to have Best Buy honor something close to it's advertised price. The instore representatives (professional and courteaous) would only reduce the open box item to $1263 (No accessories, I would still have to purchase 3D glasses). Even though the same piece of paper was advertising the 46" and 60" of the same model NEW for $1,199 (They are just not available). My apoligies I didn't catch the SKU of the 60" version on the instore ad, though I did get a picture of it.
So, you have the TV I want in my local store, but want to charge me more than the next size up for the current sale? The 60" shows as available online, but the phone representative stated Best Buy was not willing to ship it from "a warehouse in a different region".

Hello dp0akley-
When searching for my last TV, I did a lot of comparisons around picture quality, size and definitely pricing, so I can understand your frustration at finding the TV you wanted, but not at a price you would have liked.
There are occasions where a promotion with the manufacturer or the pricing from the manufacturer may cause a larger size TV to be cheaper than smaller TV’s. In those situations, we are not able to lower the price of a smaller TV to match that of a larger TV. In general, open box pricing is not negotiable and is set, so hearing that the store was willing to work with you to find a good price is nice to hear. The open box TV you listed is not available on BestBuy.com, so it wouldn’t have been the same price as the one you saw on BestBuy.com.
BestBuy.com represents the entire US, so depending on the product, it may not be available everywhere. In this case, the 60” TV you were looking at is a discontinued model, so would most likely explain the lack of availability in your area. We do not ship TV’s of this size from store to store unless the stores share a common warehouse.
It sounds like in this case, of the TV’s you are interested in; your best bet may be the open box one the Durham store has available.
I apologize for any disappointment that this may cause you.
Sincerely,
Bill|Senior Social Media Specialist | Best Buy® Corporate
Private Message

UML Model for the Petstore application

can sun provide us with an UML model of the petstore application so that java designers and programmers can better understand the design. The browsable source code is nice but going through that is a big time consuming task which few can afford.
I hope some more of U guys out there also agree with me and if so please suggest the same.

http://forums.java.sun.com/thread.jsp?forum=166&thread=156279

Multisim model for the semicron AN-8005 module

Similar Messages

Maybe you are looking for