Multisim toolbars are missing and cannot be re added by right clicking
In multisim 10 tool bars were disabled. I tried to update to Multisim 10.0.1 to resolve. Now the tool bars are all missing and there is no file menu. Also right clicking on the menu bar does not give any options.
I goofed up on my explaination. I am going to try again and do it right this time. You still have to have your CD in the drive for this to work.
Goto your National Instruments Folder on your hard drive.
Goto the Shared Folder.
Goto the folder that is labeled NIUninstaller.
Click the file named "uninst". Now you you will be presented with the menu. Highlight the product you wish to work with and then click Repair.
The above post I made I got confused. You can Un-install and Re-istall using that procedure but it doesn't offer a repair option. I apologize for my error.
I would recommend trying Nestor's suggestion first as it may be less of a headache and sounds like a better option. If that doesn't work for you, then try my technique.
Kittmaster's Component Database
http://ni.kittmaster.com
Have a Nice Day
Similar Messages
-
As question states, the menu toolbar and bookmark toolbars are missing upon restart.
Both are fully recoverable as customized, but then disappear again upon restart.I deleted the localstore.rdf.
But, I usually run Norton's Utilities 2012 "clean disk" upon closing down computer. The problem is something Norton is doing.
Firefox is storing my configuration/profile related to showing the two toolbars in some fashion (perhaps as a temp file), that Norton is erasing it.
Norton isn't deleting the customization/uniqueness of the toolbars.
Just that they don't show upon restarting.
There is probably a way for Firefox to store this "permanently".
Thanks for the help so far. The fix may not be something Firefox can do. -
Navigation and bookmark toolbars are missing
The navigation and bookmark toolbars are missing. They are checked in toolbars menu, when I try to customize a toolbar and drag a item onto the toolbar, it disappears. I clicked on reset the default configuration, nothing has changed. I tried starting safe mode and resetting the toolbars, didn't help. I tried re-installing firefox, didn't help. Any ideas?
Did you find the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] ?
Help > Troubleshooting Information > Profile Directory > Open Containing folder
Create a new profile as a test to check if your current profile is causing the problems.
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins"
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
My toolbar is missing and there is a button at the top left that asks me to "Please re-install the Toolbar" but when I click on it nothing happens???
Then when I start Mozilla I get a long delay before it launches and a script running error "A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete.
Script: chrome://tavgp/content/libs/include.js:595"
How do I solve these issues???No idea - and you provide no clues
what version of iPHoto do you have? Of the OS? is the iPhoto icon you are speaking of in the Dock?
re-read your post and try to provide information using standard Mac terms since we can not see you or your computer and only have your worrds to let us try to help you
Somehow my "IPhoto" icon now says "Preview". When I click on "Preview" nothing opens up except the bar says Preview. When I click on the Preview on the bar, a box opens up with different items, except when I click on any of them, there is nothing there. The only thing that work is the "quit preview". However, it is still there where my IPhoto icon should be. I can't get into my IPhoto. How do I get rid of this "Preview" and how did it end up taking over the IPhoto icon???
If you go to your Applications folder and double click on iPhoto what happen?
LN -
I have reset my macair because of another software issue I cannot solve. It solved my issue but now I noticed that iPhoto and iMovie are missing and if I searched it in the appstore it is not free. I check the updates, it is also not there. Help please.
Hi Loca Latte,
This might help:
http://offers.adobe.com/en/na/audition/offers/audition_dlc.html
- Dave -
Yahoo toolbar is missing and won't reinstall
My yahoo toolbar is missing and won't reinstall. The yahoo icon is there and the space to type for the search engine is there but the search engine doesn't do anything when I try to use it. The apps/icons are all missing too. I uninstalled the toolbar and have reinstalled it 10 tomes and it won't work.
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
My Wife and I have separate accounts on the same Macbook Pro. I have moved the iTunes library to a shared area and we can both access it, however, my Wife (secondary user)can't import cd's. Is there something we are missing and is there a way to do this?
You are more likely to get relavant and useful suggestions posting to the Mac forums instead of the iTunes for Windows forum where you've posted.
-
A library on my hard drive became corrupted, so I over-wrote it from an external hard drive. When I now access the library on my hard drive, many of the images are vertical, and cannot be rotated other than one at a time. Ideas to correct this?
You had already done "Repair" and "Rebuild"? These usually takes scores of minutes or hours.
Does the Library on your external drive work from the external drive? Navigate to it in Finder and double-click the name.
If it does, delete the problem Library, empty the System Trash, reboot, Verify your system disk using Disk Utility (and might as well repair permissions while you're at it), reboot, test the external drive Library once more to confirm it works properly, then close it and copy the Library to your system drive. When the copying is done, double-click the Library (now on the system drive) and see what you get. -
I installed windows 7 on my iMac 21.5 (late 2009) and when I boot windows 7, the lag drivers are missing and bootcamp is not installed. The windows package would not download through bootcamp, even when left alone for 2 hours. Don't have the lion disk... Drivers seem impossible to get. Please help!
lan drivers*
-
Help! I upgraded to 11 and it worked once. Now, when I connect to itunes it tells me that required files are missing and please reinstall. I have reinstalled, I have deleted and reinstalled and the same message appears. Thanks.
Windows XPMeanwhile, I tried someone's suggestion to delete ITunes and Quicktime and reinstall both; still got the same mesage.
-
I tried to open Photoshop Elements 11. I got a message that components of the application are missing and that I needed to reinstall Photoshop Elements. I purchased the software by downloading it from Adobe so how can I reinstall it?
Are you launching Pages from an icon in your Dock? Installing the update does not change the Dock icons & it does not remove the older versions. Go to your Applications folder & launch the new Pages from there.
-
I just installed the latest version of iTunes, but when I went to open iTunes I got a message saying registry settings used to for importing and burning CDs and DVDs are missing and I should reinstall iTunes. Really?
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
My computer had to be repaired and i lost some of my purchases. my purchase history does not include the ones that are missing and the ones that do appear indicate they are free purchases. none of my purchases are free i paid so how do a recover them?
asuming you are talking about the app store try signing into your account using your apple id into the app store.
-
I am using Adobe Photoshop Elements 11, I just transferred all of my data from an old computer to a new computer, all my pictures and documents transferred fine but, my albums are missing and the date and time that is usually under the picture are missing.. How do I get them back?
Hi,
Which operating system are you running on?
The date & Time can be displayed by going to the View menu and checking Details - also File Names if you want them displayed.
The Album information is saved within the catalog so it sounds as though you didn't do a catalog backup on the old computer and a catalog restore on the new computer which is the recommended way of transferring elements data. Did you just copy the photos over?
Brian -
When combine multiple PDFs into one, some letters are missing and display wrong letter
Hi all. I get a problem with combine multiple PDFs into a single PDF document. There are some PDF documents and they are working fine to open each document separately. But after I use Adobe Acrobat 8 Standard to combine them into one, some letters are missing and some display wrong letter (e.g. "forums" display "fo ums"). Our company has Adobe Acrobat 8 Standard, Adobe Acrobat 7 Professional and Standard. But all of them have some problem. Does anyone have idea for that? Please help me! Thanks very much!
I have a similar situation, but my PDFs look fine in Acrobat Pro 8,Acrobat Reader 8, and Apple preview, but are missing letters in Acrobat Pro 7. I think it stems from the files being combined all having the same font, but each having a unique subset stored in the respective files, but with the same name (and ID?), and when they are combined, the character sets are getting hosed somehow.
Maybe you are looking for
-
27" display and late '09 MBP 13" - Display software update **doesn't work**
Hello All, My shiny new 27" LED cinema display arrived today. The display is stunning, but when I downloaded and installed the "LED Cinema Display Software Update 1.0" (http://support.apple.com/kb/DL1107) on my mid-'09 MBP 13" it doesn't work!! The i
-
I have a macbook ( late 2008 ) and plan to buy a mac mini for office. I have a screen which can be used as an external diplay there. However, if i needed to work at home can I use my macbook or macbook pro as a display for mac mini? Thank you ASmac
-
Post Author: sampolo CA Forum: Crystal Reports I am running Crystal Reports Product Version - 11.5.7.770, On MS windows Server 2003 R2 standard Edition SP2 But every time I launch Crystal Reports I am getting the following error message.. An error ha
-
PreferenceStoreException when selecting a Remote Portlet
I endup in this error when I add a non-weblogic Producer to Portal Admin console Library. The producer gets added correctly and lists all the protlets from the producer. Here are the steps I follow. 1.Click on the Producer just added under Left navig
-
The size of my exported FCP movie is too big for DVD studio pro
Hey, I have been editing for 4-5 years now and have never had a problem with size of a project to put into DVD Studio Pro to burn. However, I just finished a 2 hour project in which exported as a FCP movie it is 23.97 gb in size. When i put this into