Multisim user error user.ewfg not found

Hello ! I have a problem with Multisim 8: i've installed it as administrator and when i try to launch it as a user (the user name is student) i get this error: student.ewfg not found default.ewfg nor found! i have enabled Full control options and it still doesn't work. It would be great if anyone can help me. Thank you

If you logged on the machine with an ‘admin” account Multisim
starts but when logged on with a "user" account, it does not, then
this have to be a permission issue.  You need to give everyone full access
to the following folders:
1.  Multisim user
2.  Database
Double check mscomp_s.prd inside the database folder, the permission you set on
the Database folder does not inherent to this file.
Tien P.
National Instruments

Similar Messages

  • [User home directory property not found.]

    Our Roaming Profile policy does not work but exits with the following error message in the log file:
    RoamingProfile Policy] "...[POLICYHANDLERS.RoamingProfile.ErrorInEnforcement] .... [User home directory property not found.] ...."
    We are running ZCM 10.3.1
    We have the exact same environment at another customer where everything is just working fine. We compared the user properties and could not find any differences. eDirectory is fine, too
    Does anybody have the same problems or a solution to it?
    Thanks,
    Sebastian

    Yes, home directory is defined in eDir.
    In Novell Client for Windows XP there is no "Allow Roaming User Profile Paths to non-Windows servers" attribute, it is in Client for Win 7 only.
    In roaming policy, if I type the path to home directory manualy, it works fine.
    In our original environment I have ZfD 4 on Netware, roaming profiles save to home directories normally, without errors.

  • Import user drive (Mac HD) not found / not available as import source

    Hi,
    the Mac internal HD ist not shown on import screen (no user drive shown!). Whenn I select 'choose other source' I can see the user drive but no
    finder-structure an all!!! pictures appear for import (sorry if I don't use the
    right words no nativ!)
    pls tell me how to add screenshots to explain - thx

    Hi,
    thank you for this incredibly helpful advice.
    The vanished folders are back in place. :-D
    Great!
    Am 16.05.2014 um 23:31 schrieb blokfluitist <[email protected]>:
    import user drive (Mac HD) not found / not available as import source
    created by blokfluitist in Photoshop Lightroom - View the full discussion
    I just had the exact same problem !  And am delighted to say that it's fixed thanks to a friend who pointed me here... http://m.imore.com/how-unhide-your-users-directory-1093
    I followed the instructions and my user drive has now been restored to the image source list... phew !!
    https://forums.adobe.com/servlet/JiveServlet/downloadImage/2-6385792-640708/ScreenShot2014-05-16at19.21.51.png
    https://forums.adobe.com/servlet/JiveServlet/downloadImage/2-6385792-640715/277-605/ScreenShot2014-05-16at22.03.52.png
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6385792#6385792
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop Lightroom by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • I want to add refworks grabit to my tool bar, when I try to install for firefox it won' t let me this is what I get: HTTP Error 404.3 - Not Found The page you a

    this is the complete error I get. I just installed firefox so that I can use this feature and now it is useless.
    Error Summary
    HTTP Error 404.3 - Not Found
    The page you are requesting cannot be served because of the extension configuration. If the page is a script, add a handler. If the file should be downloaded, add a MIME map.
    Detailed Error Information
    Module StaticFileModule
    Notification ExecuteRequestHandler
    Handler StaticFile
    Error Code 0x80070032
    Requested URL http://www.refworks.com:80/refgrabit/install.xpi
    Physical Path E:\RefGrabIt\install.xpi
    Logon Method Anonymous
    Logon User Anonymous
    Failed Request Tracing Log Directory C:\inetpub\logs\FailedReqLogFiles
    Most likely causes:
    It is possible that a handler mapping is missing. By default, the static file handler processes all content.
    The feature you are trying to use may not be installed.
    The appropriate MIME map is not enabled for the Web site or application. (Warning: Do not create a MIME map for content that users should not download, such as .ASPX pages or .config files.)
    If ASP.NET is not installed.
    Things you can try:
    In system.webServer/handlers:
    Ensure that the expected handler for the current page is mapped.
    Pay extra attention to preconditions (for example, runtimeVersion, pipelineMode, bitness) and compare them to the settings for your application pool.
    Pay extra attention to typographical errors in the expected handler line.
    Please verify that the feature you are trying to use is installed.
    Verify that the MIME map is enabled or add the MIME map for the Web site using the command-line tool appcmd.exe.
    To set a MIME type, use the following syntax: %SystemRoot%\windows\system32\inetsrv\appcmd set config /section:staticContent /+[fileExtension='string',mimeType='string']
    The variable fileExtension string is the file name extension and the variable mimeType string is the file type description.
    For example, to add a MIME map for a file which has the extension ".xyz": appcmd set config /section:staticContent /+[fileExtension='.xyz',mimeType='text/plain']
    Warning: Ensure that this MIME mapping is needed for your Web server before adding it to the list. Configuration files such as .CONFIG or dynamic scripting pages such as .ASP or .ASPX, should not be downloaded directly and should always be processed through a handler. Other files such as database files or those used to store configuration, like .XML or .MDF, are sometimes used to store configuration information. Determine if clients can download these file types before enabling them.
    Install ASP.NET.
    Create a tracing rule to track failed requests for this HTTP status code. For more information about creating a tracing rule for failed requests, click here.
    Links and More Information This error occurs when the file extension of the requested URL is for a MIME type that is not configured on the server. You can add a MIME type for the file extension for files that are not dynamic scripting pages, database, or configuration files. Process those file types using a handler. You should not allows direct downloads of dynamic scripting pages, database or configuration files.
    View more information »

    That file might have moved to a different location on the server. I think you'll need to check with RefWorks support or your local IT department on why the install page links do not work.

  • Error CREDIT_SEGMENTS_ADD COIOB NOT FOUND FOR object CC...

    Hi All,
    My user is geting the ERROR while running the actual OH calculation through CJ45 as below:
    Error CREDIT_SEGMENTS_ADD COIOB NOT FOUND FOR object
    Message NO k5011.
    As this is more ralaing to the costing sheet, this refers to controlling module.
    We have verfied the Note 515426, but the correction were delivered in 4.7 itself. My client is using the  6.0 verion.
    Can anybody suggest the reason for the above error.
    Thanks & Regards
    Shankar

    HI,
    whats the message class, message number?
    BR Christian

  • PI MDM Adapter Error - MDM port not found

    We are working on an R/3 - PI - MDM scenario using the PI MDM Adapter. We are currently encountering the following errors.
    In RWB - Communication Channel Monitoring
    MDM Adapter listener could not start due to: Can not create repository session '<server=XXXXXXXX serverUser=Admin repository=Product user=Admin>' caused by: Connection Failed: Cannot create connection to MDM Server 'XXXXXXXX' for one of the following reasons: (1) server does not exist, (2) server is not started, or (3) input/output problem while creating connection, error code: UnknownServer
    In RWB - Message Monitoring
    2009-09-08 15:31:22 Error Message could not be forwarded permantely to the JCA adapter. Reason: System error: MDM port not found
    2009-09-08 15:31:22 Error Message could not be forwarded to the JCA adapter. Reason: Permanent error: Adapter call failed. Reason: com.sap.aii.af.lib.ra.cci.XIAdapterException: System error: MDM port not found
    2009-09-08 15:31:22 Error Adapter Framework caught exception: System error: MDM port not found
    2009-09-08 15:31:22 Error Delivering the message to the application using connection MDM_http://sap.com/xi/MDMAdapter failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.af.lib.ra.cci.XIAdapterException: System error: MDM port not found.
    Is there an issue with our receiver communication channel and the MDM Access Parameters? We are using the Port code and Remote System code provided by the MDM team.
    Anyone experience this same issue?

    We are no longer seeing the MDM Port Not found error, but we are still seeing the UnknownServer error. Looking at RWB Message Monitoring it appears that the message is successfully sent to the MDM server, but nothing is coming into the Ready folder. Any ideas on where the message is going, and why it is not showing up in the Ready folder?
    In RWB - Communication Channel Monitoring
    MDM Adapter listener could not start due to: Can not create repository session '<server=XXXXXXXX serverUser=Admin repository=Product user=Admin>' caused by: Connection Failed: Cannot create connection to MDM Server 'XXXXXXXX' for one of the following reasons: (1) server does not exist, (2) server is not started, or (3) input/output problem while creating connection, error code: UnknownServer
    In RWB - Message Monitoring
    2009-09-11 14:04:15 Information The message was successfully received by the messaging system. Protocol: XI URL: http: //XXXXXXXX/MessagingSystem/receive/AFW/XI Credential (User): PIISUSER
    2009-09-11 14:04:15 Information Using connection MDM_http ://sap.com/xi/MDMAdapter. Trying to put the message into the receive queue.
    2009-09-11 14:04:15 Information Message successfully put into the queue.
    2009-09-11 14:04:15 Information The message was successfully retrieved from the receive queue.
    2009-09-11 14:04:15 Information The message status was set to DLNG.
    2009-09-11 14:04:15 Information Delivering to channel: MDS_TEST_CC
    2009-09-11 14:04:15 Information The message was successfully delivered to the application using connection MDM_http ://sap.com/xi/MDMAdapter.
    2009-09-11 14:04:15 Information The message status was set to DLVD.
    I thought the implementation of the MDM Adapter was suppose to be straightforward and simple
    Edited by: Chris Williar on Sep 11, 2009 9:56 PM

  • Safari 7.0.6 crashes: Dyld Error Message: Symbol Not Found

    After I did the latest MacOS update (10.9.5) Safari (7.0.6) no longer runs. I repaired permissions and also rebooted in safe mode so I could potentially remove any spurious plug-ins, but the last time I did this was with MaxOS 6 so I have no idea where to look in the current version.
    The error message that pops up is:
    Process:         Safari [1279]
    Path:            /Applications/Safari.app/Contents/MacOS/Safari
    Identifier:      com.apple.Safari
    Version:         ???
    Build Info:      WebBrowser-7537085010017001~4
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [194]
    Responsible:     Safari [1279]
    User ID:         505
    Date/Time:       2014-09-26 08:16:17.066 +1000
    OS Version:      Mac OS X 10.9.5 (13F34)
    Report Version:  11
    Anonymous UUID:  84ADDFB5-CAD4-0759-3667-8E0B47E8E995
    Sleep/Wake UUID: 51EC656E-25AB-4167-810D-D7A644340E28
    Crashed Thread:  0
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Application Specific Information:
    dyld: launch, loading dependent libraries, ignoring DYLD_* env vars
    Dyld Error Message:
    Symbol not found: __ZN3JSC10JSDataView6s_infoE
    Referenced from: /System/Library/StagedFrameworks/Safari/WebCore.framework/Versions/A/WebCore
    Expected in: /System/Library/Frameworks/JavaScriptCore.framework/Versions/A/JavaScriptCore
    in /System/Library/StagedFrameworks/Safari/WebCore.framework/Versions/A/WebCore
    (insert a 'shed load' of other lines of log data which you probably don't need, right?)

    If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
    If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
    *The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later.

  • Quicktime would fail to write/export to server windows share with "Error -43: file not found" errors

    Summary:
    With the combination of Windows 7 and Quicktime 7.x, Quicktime would fail to write/export to server windows share with "Couldn't create output movie storage" and "Error -43: file not found" errors
    Steps to Reproduce:
    Trying to render to Quicktime files using network shared folders as a destination:
    Unable to open file. (-1610153459)
    The funny thing: it only happens when there are at least two shared folders mapped on the workstation, and the destination folder used for the rendered movie is not the first one.
    If we have only two mapped drives, F: and G: for example, and we try to render something to F:, everything works fine and no error is showed. But, when the destination is the G: drive, rendering never works, the error is showed, but a zero-byte file is created in F: (!!). ODD! If we remap F: drive with a different letter, but a letter BEFORE G:, the problem always happens. If we remap drive F: to any letter AFTER G:, making G: the first available network drive, rendering works. Also, simply unmapping F: and leaving G: as the only connected network folder makes render to work.
    We do not have a D: drive in our Windows 7 workstations, they are all C: only.
    It is a 100% reproducible problem. We tried with three different Active Directory networks and workstations. It has all of the features of a software bug.
    Any help would be appreciated.
    Cheers!
    Expected Results:
    Error -43: file not found
    Actual Results:
    The workaround seems to be to use the full path to the servers instead of the mapped mount point (ie //server/z/... instead of Z:/...
    Regression:
    All versions of quicktime 7 in combination with windows 7 client and more than one smb share point mapped in a letter.
    Notes:
    All software that uses quicktime movie exports showed this error.

    Not sure what file your are referencing?  Thanks for your suggestion, however, it's not relavant.
    It renders fine if you render to either the UNC path or the first mapped drive.
    i.e. If you have two mapped drives G: and H:
    they both point to \\fileserver\share1\folder
    If you render to H: it will fail, if you render to G: it works!  Same path, same user, same permissions.
    The only difference is H comes after G, so it fails... BUG.  If it was to do with anything else, underscores, permissions etc, it would fail on both.

  • XML Publisher Loading data error "Run-Time Error '76' Path Not Found"

    Hi,
    I am trying to preview the PDF output in the XML Publisher Desktop Application.
    I am able to LOAD the data successfully.
    But whenever we try to preview the output, we are getting an error saying "Run-Time Error '76' Path Not Found".
    I am running in Vista OS and MS Office 2007.
    What to be done after this? Do I place the .xml and .xsd in Temp folder?
    Kindly pls help me out in this. It would be really a very great.
    Thanks & Regards,
    Santhoshkumar.M
    Edited by: 882342 on Aug 31, 2011 3:24 AM

    You must give your user full control to C:\program files\Oracle i.e. the folder where your BI Publisher or XML Publisher Desktop is installed, see http://boardreader.com/thread/xml_publisher_error_Run_Time_Error_76_Pa_lsptXmonb.html

  • Firefox 7.0 - Can not upload the file from local machine to server...gives "error 404 : file not found"

    firefox 7.0 - Can not upload the file from local machine to server...gives "error 404 : file not found"

    you have not understood my point
    how does this code will run on servlet when I want to upload a file from client's
    machine to server machine
    what I am doing is I am giving an option to the user that he/she can browse the file and then select any file and finally it's action is post in the jsp form for which I have sent the code
    All the computers are connected in LAN
    So how to upload a file from client's machine to server's machine
    Plz give me a solution

  • UI Error 'Method clone not found in class java.lang.Class'

    When attempting to view an application window in the User Interface error I receive the error 'Method clone not found in class java.lang.Class'. The window will run correctly when I execute the application and other objects on the window are displayed correctly in the UI editor.
    Within the window class I have used the following line of code to clone a reference list of values that is loaded just once when the application starts up: -
    dsDefaultComboBoxModel priorityComboBoxModel = (dsDefaultComboBoxModel) dsReferenceLuLists.priorityComboBoxModel.clone();
    And then this line of code to create a combo box: -
    dsGuiComboBoxRefelu priorityComboBox = new dsGuiComboBoxRefelu(priorityComboBoxModel,ReportWindowSql.priorityCodeBuffer);
    And then later on the combo box is displayed.
    detailsArea.add(priorityComboBox, new XYConstraints(250,10,dsGlobalVariables.gvFieldWidthLarge,-1));
    'dsDefaultComboBoxModel' is defined as follows: -
    public class dsDefaultComboBoxModel extends DefaultComboBoxModel implements Cloneable
    public dsDefaultComboBoxModel()
    public Object clone()
    try
    return super.clone();
    catch ( CloneNotSupportedException e )
    // Shouldn't happen.
    throw new InternalError( e.toString() );
    This error occurs using the latest v903, but was also present in previous versions of JDeveloper.
    At the moment this means that I did to execute the window in order to see all of the GUI elements that are displayed. As on option I could use something other than the clone method, but it seems to be such a nice way of copying the static reference lists.
    Thanks for any help.

    Hi Darren,
    My guess is that since DefaultComboBoxModel doesn't implement Cloneable, you can't call super.clone(). Does your code compile?
    Later.
    Dennis

  • Hp 5535 will not scan, error message printer not found

    I have a HP Envy 5535. I have only been able to scan one time with it. I scanned 22 documents, after running HP Scan Doc 4.4. Each time the HP Scan Doc states that everything is OK, yet as soon as I try to do even a test scan, I get the error message "Printer not found." I have also tried to run this scan with my McAfee virus firewall off, and it still doesn't work. I have also identified it on McAfee as part of my network.
    This question was solved.
    View Solution.

    Hi @prazdancr,
    Welcome to the HP Forums!
    I am sorry that you cannot scan with your HP Envy 5535, but I am happy to help!
    For further assistance I will need to know:
    If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
    If the printer is connected, Wireless, or USB.
    If the printer is able to make copies by itself.
    If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
    In the meantime, please try going through this scanning guide. A 'The computer is not responding' Error Message Displays During Scanning.
    Hope to hear from you soon, and have a nice day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Error 7: File not found occurs in 8.2 from transition of 4.1. Specifying the file in file dialog returns error although file is in the directory.

    Copied a program from 4.1 to 8.2 recently and receive an error 7: File not found at open file+.vi.  The program is built so a file dialog will pop up and ask for the destination of the file.  Eventhough there is a file in the specified directory, an error is returned.  Running open file+.vi by itself returns no error with the same file designation.  Any clues?

    noviceak,
    Welcome to the NI Discussion Forums.
    I created a quick VI in LabVIEW 4.1 that displays a file dialog and then passes that file path to "Read Characters from File.vi" (which in turn calls Open File+.vi).  I then opened this file in LabVIEW 8.2 and ran it successfully (see code screenshot below).
    When you say there is a file in the specified directory are you using the file dialog to browse to the directory or to select the specific file?  Open File+.vi expects the path to a file rather than a directory - that is C:\folder\file.txt rather than C:\folder.  You might also want to create an indicator or probe to see what path is being passed to Open File+ to ensure it is what you expect.
    I feel like I should also say that in the days (years) inbetween LabVIEW 4.1 and 8.2 the file operation VIs have changed significantly.  While the old Open File+.vi still lives in vi.lib for compatibility purposes we no longer recommend using it for new applications.
    I hope this helps and again, welcome to the community.
    Regards,
    Simon H
    Applications Engineer
    National Instruments
    http://www.ni.com/support/
    Message Edited by Simon H on 01-18-2007 08:01 PM
    Message Edited by Simon H on 01-18-2007 08:03 PM
    Attachments:
    LV4 File Dialog.png ‏3 KB

  • Error encountered while signing. Windows cryptographic service provider reported an error. Object not found. Error code:2148073489. Windows 7, Adobe Reader XI, Symantec PKI, Smart Card and CAC. I have seen other threads for this error but none have a reso

    Error encountered while signing. Windows cryptographic service provider reported an error. Object not found. Error code:2148073489. Windows 7, Adobe Reader XI, Symantec PKI, Smart Card and CAC. I have seen other threads for this error but none have a resolution. Any help would be appreciated.
    Sorry for the long title, first time poster here.

    This thread is pretty old, are you still having this issue?

  • Error "Run-Time Error '76' PAth Not Found" in XML Publisher Desktop

    Hi All,
    we are trying to preview the PDF output in the XML Publisher Desktop Application.
    We are able to LOAD the data successfully.
    But whenever we try to preview the output, we are getting an error saying "Run-Time Error '76' Path Not Found".
    We are using the XMLP Desktop application on the Client Machine.(Citrix)
    Can anybody help us in this regard?
    Thanks,
    Sachin.

    Hi.
    You are posting in the wrong forum.
    Please post to the BI Publisher Forum:
    BI Publisher

Maybe you are looking for

  • Levelling: Work Distribution based on Resource Capacity and Project Priorities.

    Hi team, I have inherited about 25 projects and 15 resources spread across these projects. We use project server 2010 to manage projects....we launch any lest a new project each month. We run Weekely modelling.Having a nightmare managing shared resou

  • Display blank, key board light not working, won't wake up if sleeps.

    Hi. I just bought a Toshiba Satellite P850 and after two weeks I had the first big problem. It starts normally first time but after a shut-down and a few hours later start,the display is blank, any light on.The back light keyboard the same - only the

  • ICCMP_INBOX/InboxResultView - Link to open document

    Hello, in the view ICCMP_INBOX/InboxResultView there is a link to open the selected document on attribute STRUCT.ITEMTYPE. We need this same Link to open the document on the STRUCT.DESCRIPTION because we will not use STRUCT.ITEMTYPE in our UI configu

  • Need to use BAPI_RE_CN_CREATE to create an unlimited contract

    Hi, I would like to create an unlimited contract using BAPI above. I tried to change the 1st end date to 31.12.9999, but the status still show fixed term contract. Any guys can shade some light on this? Regards, Zheng

  • IPhone 3G S in Europe

    We currently live in France and want to purchase the new Iphone here. We will likely be returning to the USA after our job is over here in less than a year. Can we bring the Iphones into the USA and set them up on the AT&T system? or do we have top p