Multitake Editor and Slipping a Track

Hello,
I'm using the Multitake Editor to create a film commentary from three versions that were recorded; to find the most interesting flow through the commentary.
In the Multitake Editor, when you put cuts in a track and crossfade to another track or section it lets you slip a section if it's out.
The problem I've got is that there's a point at which it will not let me slip the track anymore. How can I fix this so I can slip the section to the point I want?
As they advertise this feature for ADR and I guess that means they expect only small slip adjustments, it may not be possible. I'm trying to slip the track by about 30 sec or more.
This is all in the Multitake Editor, within one cut section. It must have something to do with the start or end of the track, but I just can't figure out how to fix it.
Thanks for any help.
Matt

Thanks for the reply. That sounds like an explanation for what I'm experiencing.
Since my post I've gone back to a previous version of the project where I had composed a decent commentary from three different tracks of about 20 min. Going back, though, nearly every single cut is messed up and basically, to cut the story short, it just can't cope with the kind of thing I'm doing; you're right.
It seems that the tracks have minds of their own, or slipping a track down the timeline causes previous sections (even though seperated by cuts) to go out.
I'm going to start over (about 5 hours wasted!) and just do as you say.
I thought it would have been a good tool for that.
Anyway,
Thanks again,
Matt

Similar Messages

  • Error when trying to access the RBAC User editor and Message tracking

    Hi,
    I am getting an error when trying to access the RBAC User editor and Message tracking on the Web Mgmt interface. I verified that the admin account trying to access is in the Organization Management group and has the correct Role Assignment Policy applied.
    I searched through this thread below and saw that matching the msExchRoleLink and msExchUserLink attributes fixed the issue. 
    https://social.technet.microsoft.com/Forums/exchange/en-US/fc568cc6-8691-4127-b70b-bcc82f9b1f7f/first-2010-cas-server-no-administrator-rights-emc-permissions-gone?forum=exchange2010
    However I have another environment where this is not the case and works just fine; the msExchUserLink attribute has a value of CN=Organization Management,OU=Microsoft Exchange Security Groups,DC=Domain,DC=Local which is different as per the issue outlined in
    the above thread so I am not convinced that this will work and also don’t want to blindly edit something in adsiedit without being sure.
    I then checked the event logs on the server and saw the below error logged;
    Current user: 'Domain/Server Services Accounts/administrator'
    Request for URL 'https://server.domain.com/ecp/default.aspx?p=AdminDeliveryReports&exsvurl=1' failed with the following error:
    System.Web.HttpUnhandledException: Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the
    page. Please contact your administrator for the required credentials. For new credentials to take effect, you have to close this window and log on again.
       at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
       at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
       at System.Web.UI.Control.LoadRecursive()
       at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
       --- End of inner exception stack trace ---
       at System.Web.UI.Page.HandleError(Exception e)
       at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
       at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
       at System.Web.UI.Page.ProcessRequest()
       at System.Web.UI.Page.ProcessRequest(HttpContext context)
       at ASP.default_aspx.ProcessRequest(HttpContext context)
       at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
       at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
    Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the page. Please contact your administrator for the required credentials. For new credentials to take effect, you
    have to close this window and log on again.
       at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
       at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
       at System.Web.UI.Control.LoadRecursive()
       at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    I then had a look at the IIS permissions for ecp and owa. The account did not have permissions so I added them there but still got the same error. I’ve also tried all of the above with a newly-created account but still got the same issue.
    Any ideas as to what the above event log is specifically referring to?

    Hi,
    From your description, I would like to clarify the following thing:
    If you want to search message tracking logs, the account you use should be a member of the role groups below:
    Organization Management role group, Records Management role group, Recipient Management role group.
    Hope this can be helpful to you.
    Best regards,
    Amy Wang
    TechNet Community Support

  • Audio 1 & 2 crash sample editor but not other tracks

    I've been working out this problem for a while and while not getting any conclusive solution, I am narrowing the behavior down a bit. Because of my M-Audio Firewire Solo interface I record DI guitar parts in mono on input 2. If I open an audio file recorded this way in the sample editor and copy a section, I can pretty much count on getting "I/O error = -36" when I try to paste this copied selection into another section of the file. Frequently closing this error prompt crashes the editor or causes erratic behavior such as the black & white beach ball appearing elsewhere within Logic. This doesn't happen if I do one of two things: Either import a pre-recorded stereo audio file (AIFF, WAV or REX) into Audio 1 or 2, or create a mono or stereo track 3, 4, etc. and record in that. In either case I can edit normally without trouble. Why only these tracks? I've tried different buffer settings as well as trashing my preferences and it doesn't matter. Makes no difference if I'm writing to system disk or external HD. I'm recording AIFF at 24 bits. Thanks. - Emile

    That did it! For future users, make sure the link button in the upper right hand of the timeline is black (not green). Click on the audio track that you want to un-link. Go to modify->stereo pair. Then, you can delete either audio1 or audio2. Thanks so much!

  • Premiere Elements 13 (not Pro), recorded a video with mono mic input (left channel only), need to create 2-channel (left and right) audio track for finished product. Help?

    The question says it all. I have been all over the tutorials as well as the menus inside Premiere 13 and cannot find how to edit the audio track beyond basic balance, volume, etc.
    I can see the Audio 1 track, shows audio in left channel only, but it will not respond to attempts to select, cut/copy, paste, etc.
    Basically I just want to turn one-channel audio into two-channel audio.

    25424...
    Sure you do not want to give the Fill Left and Fill Right another try?
    According to the Adobe document Adobe Premiere Elements Help | Effects reference
    Fill Left, Fill Right
    The Fill Left effect duplicates the left channel information of the audio clip and places it in the right channel, discarding the original clip’s right channel information. The Fill Right effect duplicates the right channel information and places it in the left channel, discarding the existing left channel information. For example, you might use this effect on footage shot with a monaural microphone plugged into only one channel of a camcorder, extending the voice of a speaker from one channel to both.
    From what you wrote, your Premiere Pro video seems to be saying the same.
    If that Premiere Elements Fill Left or Fill Right is no go, you might want to explore what you can do in this regard using the free audio editor Audacity.
    Audacity: Free Audio Editor and Recorder
    And, then import the Audacity edited audio back into Premiere Elements project as source media.
    Is the speaker system OK?
    We will be watching for your results.
    Thanks for the follow up.
    ATR

  • Help please! imac is completely full, FPC wont let me render! I'm a video editor and have over 70 gb worth of videos on the imac which all need to be kept but now beloved imac is full, only had it for 5 months! need external hard drive every 5 months??

    FPC wont let me render! I'm a video editor and have over 70 gb worth of videos on the imac which all need to be kept for various clients/backup/original versons but now beloved imac is full, only had it for 5 months! Will Ineed external hard drive every 5 months?? This can't be I've already resorted to getting rid of unsed applications such as garage band, iTunes,address book ect. I've trashed everything I could. what next ???
    My video files are massive, converting them to a different format doesn't reduce the size of them it just turns them into mp4 or apple pro res ect
    This iMac is for work only so there's no pictures, no music, no conacts, no messenger, no games, nonothing but videos!!

    Have a look at this: http://grandperspectiv.sourceforge.net/
    It will show you exactly what is taking up all of your space.
    You also may want to consider some kind of external storage just for your video projects.

  • I am using both PSE 13 and Lightroom 5.  When I use Lightroom as an external editor and save the photo, it shows up in PSE13 as an edited file but does not look any different.  Why doesn't it appear edited?

    I am using both PSE 13 and Lightroom 5.  When I use Lightroom as an external editor and save the photo, it shows up in PSE13 as an edited file but does not look any different.  Why doesn't it appear edited?

    People who have Photoshop, but don't have Lightroom, need ACR so that they can use Raw files. Without ACR they could do nothing with those (they may also like having ACR so that they can work on other kinds of image using the same kinds of adjustments and techniques, as are used with Raw files).
    People who have Lightroom, can get access to Raw files regardless whether ACR is present or not. They can use Lightroom on other kinds of image also, using the same methods. LR can pass images directly into Photoshop without passing via ACR (or else does so transparently, which amounts to substantially the same thing).
    ACR does not, strictly speaking, even need to be installed for this external editing to happen. In fact, not even PS needs to be - since a different image editor can be used instead, while still retaining the Adobe Raw conversion etc.
    Lightroom "subcontracts out" specialised external tasks, in this workflow, but is still your "main contractor": the image is otherwise located, viewed, managed, adjusted/presented and output entirely using LR.
    So IMO we can divide image processing into:
    operations that involve pixels and layers and layer masks and adjustment layers etc (of the kind done inside Photoshop)
    operations that involve parametric edits (of the kind done in ACR where you are not using a Lightroom based workflow; otherwise, done inside Lightroom)
    When PS is called in, that's because those tasks are impossible or unsuitable to do in Lightroom. But those tasks can't be done in ACR either - by definition, since LR and ACR have exactly the same image processing "feature set".
    Lightroom is irrelevant to the Bridge + ACR + PS workflow. This workflow requires both your PS and your ACR to be current enough, to support your Raw format etc.
    ACR and Bridge are irrelevant to the LR + (image editor) workflow. It is in this case, only LR which needs to be current enough to support your Raw format etc.
    RP

  • My ex husband had the kid's iPad.. how do I get rid of his info and ability to track me?

    Hello,
    I am recovering from a control freak.  Please help.  My ex husband took off with the children's iPad for over a year.  So the warranty is expired.  How do I keep the games he put on there (like Angry Birds) but get rid of a "restrictions Passcode" he refuses to give me and get his AppleID off of there and most importantly take his ability to stalk me via GPS tracking away?
    Yes he has been stalking me.
    I would like to add an internet browser and be able to have my own restrictions passcode so that when the children are not supervised I can turn off the internet. 
    How do I get rid of his passwords and ability to track me and set the iPad up for my children.  (I have no money, no child support and definitely no cash for tech support.)  I would deeply appreciate the help.  Even after I find a new job, it will be tight.
    Thanks so much!

    You'll have to restore the device, but with out the restricions passcode you'll have to put it into recovery mode first.
    Follow this:
    Unable to update or restore
    http://support.apple.com/kb/HT1808?viewlocale=en_US

  • Is it OK to re-use 1 instance of editors and renderers?

    Hi,
    The simple version of the question, is can I make 1 instance of my custom cell editor and cell renderer classes and safely use it in all my JTable instances?
    For example, I have a DateRenderer class, and instantiate it in a static member, and use it in all Date columns and tables, many of which will be instatiated at one time. If a column needs a non-default format, then I guess I'd create a special instance for it, other wise it would use the default instance.
    It seems to be OK so far, but but my program hasn't received any serious usage yet.
    As to why, I'm thinking this way, I've been messing around with CellEditors and renderers and despite wanting to use default functionality whenver possible, I find that I'm using custom versions for every situation... so if possible, I'd like to keep the number of instances to a minimum.
    Regards
    Iain

    OK, I see what you mean.
    Stop cell editing on focus lost isn't the default behaviour, but I've had to use it anyway (it seems to make sense).
    The reason I asked is that, to get the behaviour that I want, it looks like I'll have to have my custom renderers and editors on every column of every table so I'd like to avoid unneccessary instantiation.
    I'm aiming for a system where:
    - 1 click selects the row (default behaviour),
    - 2 clicks starts editing the cell (also default),
    - but tabbing or pressing enter after editing a cell keeps you in editing mode.
    I don't suppose that many people here have had experience with this, but entering Japanese (and presumably other non ascii type character sets) using MS's IME doesn't work very well with the standard JTable behaviour. If you don't double click, the entered japanese text appears in a little IME window somewhere on the screen (no neccessarily near the editing cell) and just gets lost when you press enter. You have to double click every time, and I can't see the users accepting that.
    I'll be investigating this over tme, and hopefully will be able to get it working smoothly.
    Thanks,
    Iain

  • In iTunes, is there any way to play one song at at time and have the song stop at its end.  I want to play guitar with a track and have that track stop playing rather than going to the next song.

    I want to play a single song in iTunes on my ipad and have the track stop when the song finishes, rather than itunes playing the next track.  I play guitar with the track and need iTunes to stop at the end of the song.
    I have worked around this issue by creating a separate play list for each song, then inserting the song into the play list.  I would like to find a more straight forward solution that would eliminate this extra step.  On my PC, I use QuickTime to bring up an individual song and then can play one track at a time.
    Thanks!

    On the IPod if the shuffle icon is colored blue it is ON, if it is colored white it is OFF. This control is global, if it is ON any album or list will be shuffled.

  • How do I re-number and re-order tracks in album view in iTunes 11 for Mac?

    When I manually transfered my iTunes library from an old PowerBook G4 to a used (but new to me) MacBook Pro, one of my albums has the same track numbers for multiple songs and so the songs are in the incorrect order.
    I know I can create a playlist of the album and re-rorder the songs, which I've already done.

    I found the answer in another thread.  I have to use Get Info -> Info for each song and change its track number to the correct number.

  • I imported a video I make in another program and I played it back in the video editor and I like the pan and zoom that was added by the program how do I save a copy with the effect of Premiere elements 12

    I imported a video I make in movie maker program and I played it back in the premiere video editor and I like the pan and zoom that was added by the program how do I save a copy with the effect of Premiere elements 12
    all I did was played it back how do I save that and make a new version of the video beacause when I save a copy the effect look I was trying to save was not there.
    Rodney
    [personal information removed... Mod - https://forums.adobe.com/docs/DOC-3731]
    [This is an open forum, not Adobe support, please do not post personal information]
    [If you are posting using email, please turn your 'sig file' function OFF for posting]

    silkman1
    I would be glad for the opportunity to customize a Premiere Elements 12 answer to your Premiere Elements 12 issue.
    But, I want to make sure that we are together on the details. This is my understanding of what you have written. Please review and let me
    know if I am misinterpreting anything that you have written.
    You have a video created in Windows Movie Maker.
    How did you output the video from Windows Movie Maker...wmv or mp4, what was the frame size and frame rate of that export?
    Next you import that video into Premiere Elements 12 (can we assume that this is on Windows 7, 8, or 8.1 64 bit?)
    From what you wrote, you have applied a pan and zoom effect to your video in Premiere Elements.
    Now you go to export the Premiere Elements 12 Timeline content with your video with the pan and zoom applied.
    But, the pan and zoom effect is not seen in playback of the export.
    Is all of the above correct so far?
    If so....we are going to need some more details from you...
    a. What is the project preset that you or the project are setting to match the properties of the video coming from Movie maker? See Edit Menu/Project Settings/General and the readings for Editing Mode, Timebase, Frame Rate, and Pixel Aspect Ratio even if the fields look grayed out.
    b. Are you applying the pan and zoom effect with the Pan and Zoom Tool, fx Effects Presets, or keyframing the Scale (for Zoom) and
    Position (for Pan) in the Motion Panel expanded?
    c. What are you selecting as your export in Publish+Share/. Please give details...are you using default settings or customizing the export
    setting under the Advanced Button/Video Tab and Audio Tab of the preset selected?
    I am suspecting some sort of mismatch of your project settings or some problems with working with the Pan and Zoom tool. I need
    your answers to help me help you. If I have written anything that you do not understand, please let me know. I will re-write if necessary
    so that we are in sync to resolve the issue.
    Thanks.
    ATR

  • My iP5 will not play any track not purchased from itunes Store, red circle with red square inside appears and skips the track, any ideas?

    my iP5 will only play songs purchased formmthe itunes store.
    all over songs, uploaded from cd's on my laptop and dragged into itunes will no longer play, a red circle with a red square in the middle appears and skips the track.
    anybody know why Itunes / iP5 will no longer play all tracks, has worked for years, only stopped with the latest itunes update.

    Hey Kelsieee,
    First, I would try to resolve the issue with the ! in a circle that you're seeing in iTunes. There's some steps in the following article that go over what that ! usually means and how to fix it:
    iTunes: Finding lost media and downloads
    http://support.apple.com/kb/TS1408
    Welcome to Apple Support Communities!
    Best,
    Delgadoh

  • Can find my iPhone be turned on remotely? I had it turned off, and twice in the last month I've found that it is turned on and someone was tracking my location. I'm a little freaked out!

    Can find my iPhone be turned on remotely? I had it turned off, and twice in the last month I've found that it is turned on and someone was tracking my location. I'm a little freaked out! Is there any way that someone could be turning "find my iPhone" on remotely? I was under the assumption that the only way to turn the service on was from my phone itself.. Is there any way that my phone is somehow resetting itself to a time when the app was turned on? I'm just grabbing straws here... I have no idea. I just know that the location arrow came on at the top of my phone, and it showed that someone was tracking my phone at that very moment... Any help would be appreciated!

    Welcome to the Apple Community.
    Find my phone can only be enabled from the device itself.

  • How can you turn your iDevice on remotely because it is offline and i cant track it through find my iphone app

    how can you turn your iDevice on remotely because it is offline and i cant track it please help

    You can not turn on an iDevice remotely.

  • I lost my iphone and i couldnt track it because the one who stole it shut it down,, what to do plz help

    i lost my iphone and i couldnt track it because the one who stole it shut it

    you've lost you're phone, you can report it stolen but i doubt they will find the person, or if you had insurance use that. there is like a 1% chance you will find it. &like someone else said, the theif cant use it if it had a passcode lock or without your apple id and password

Maybe you are looking for