Multitap on touchpad no longer works after Xorg 7.4 upgrade

After upgrading to Xorg 7.4 I can no longer use a two finger tap to middle-click, where I could before. Two finger scrolling was on by default somehow, but turning that off didn't help. How can I get middle-click back.

Hotplugging is off. Both old and new xorg.conf are at http://pastebin.com/m23c8ea46
Not sure which fdi files to look for, but I've never made any changes to them.

Similar Messages

My Bluetooth device A2DP (life audio feed) no longer works after 5.1.1 upgrade

My Bluetooth device A2DP (life audio feed) no longer works after 5.1.1 upgrade. But phone call is still working. Tried resetting phone and repairing device. Still not working. Any suggestion?

You might get. Ore assistance in a different forum area. Maybe try Using pad. This is the forum for iPhoto for iOS.

Android remote iTunes app no longer works after 10.5.2 upgrade.

Until the 10.5.2 iTunes update, I was able to use the Android app, Remote for iTunes, to enable my Android tabs to control iTunes on my Windows 7 machine. After this upgrade, my tablets no longer show up as "devices" in iTunes. Am I the only one to experience this?

Thanks for your replies.
I don't think I described my problem adequately. Before updating to 10.5.2 the clamshell mode worked correctly: I closed the lid, waited 30 seconds, then touched the keyboard and - presto! - the cinema display came alive with the desktop shown. I understand how the clamshell mode is supposed to work because it used to work just fine.
My problem now is that it no longer works the way it is supposed to. If I wait 30 seconds after closing the lid of the MBP and then touch / attach an external keyboard, nothing happens. I am following the proper steps to use clamshell mode (at least the steps that previously worked), but they do not appear to be effective any longer.
I appreciate the advice I have received about how the clamshell mode is supposed to work. Unfortunately, following those standard steps is not leading to successful operation in clamshell mode.
Thanks,
Danny

Installed Apps No Longer Work After 3.1.3 Upgrade

Last night I upgraded to 3.1.3, and since then NONE of the Apps that I installed works... Each time I try to open any of them, it will open and stop just as quickly, taking me back to the Home screen...
I thought at first it was only the Apps that required Internet Access (IM and/or Email Apps)... However, I was able to open a web page using Safari, and the Email App included in iPhone STILL works... And, like it would normally do, it would check first for a local wireless network, and switch to 3G if it does not find one... However, in this case, when trying any of the Apps I've installed, it does not even check at all for a network or 3G, the Apps just shut down just as quickly as I launch them...
Since then I've discovered that ALL the Apps I've downloaded and installed prior to the upgrade no longer work...
I have cycled the power on the iPhone (Turning it OFF by means of the SLEEP button, and then back on minutes after than), but that doesn't solve the problem...
Any information would be appreciated...
Thanks for your time...

TainoV2 wrote:
I have cycled the power on the iPhone (Turning it OFF by means of the SLEEP button, and then back on minutes after than), but that doesn't solve the problem...
Did you try a reboot (by means of BOTH the Sleep and Home buttons and holding both IGNORING the slide to turn off, and keep holding until you finally see the Apple Logo?)
Message was edited by: DaVBMan

Mail search no longer works after 10.7.2 upgrade

The search field in the upper right hand corner no longer returns any results, from any mailbox, regardless of the text I type in. This was working fine until I upgraded to 10.7.2. I absolutely rely on the search feature as my mail messages are a wealth of information for me.
Help!
Brian

I've managed to get it working after trying the following:
1. Used Disk Utility to repair permissions on my main drive
2. In Terminal used the comand "sudo mdutil -v -i on /"
That tells spotlight to turn indexing on for that drive.
3. Did a restart
I'd recommend trying the permissions and a restart first and if that doesn't help then try the command line fix.
The first time I ran it without -v so got no feedback on what it was doing. Stopping it and trying to do it again gave me the message "Error: Index is already changing state. Please try again in a moment." After the restart it now says:
Indexing enabled.
Scan base time: 2011-10-19 07:40:10 +0100 (60 seconds ago), reasoning: 'scan not required - avoided catchup scan'
Now mail is back to how it was before the 10.7.2 update, happy days.

AirPrint no longer works after 10.6.5 upgrade

I followed the instructions in the following discussion thread (i.e. ran the mentioned script) and Print was working perfectly from my iPhones and iPad. Then other day I updated the OS to 10.6.5 and printing no longer works. I assumed that the changes were overwritten by the OS update so I just ran the Script again, same as before, however Printing still does Not work. Please advise. Could it be that Apple realized this work around and plugged it just to **** their "valued" customers.
http://discussions.apple.com/thread.jspa?threadID=2658720&tstart=0
Thanks in advance.

Then other day I updated the OS to 10.6.5
The other day?
Your post in the other thread on 29 November shows you had 10.6.5 installed.
Also I can't explain why but it most certainly did work with the previous OS X
AirPrint is not dependent on the OS
It is dependent on the printer firmware. The printer needs to be on the local network and does not need to be connected directly to a computer.
The fix in that other thread allows iPads to print to printers connected to a Mac.
The code that allows this was not present in Mac OS prior to 10.6.5
If it worked previously, it sounds like you have an AirPrint compatible printer.

W520 webcam no longer working after Windows 8.1 upgrade

Hello,
I upgraded my w520 from Win 7 to Win 8 last year with zero problems.
Now I upgraded my W520 Win 8 to Win 8.1 via the store download. Except the webcam everything works fine.
In e.g. the Skype desktop application, Google Hangouts or the camera app, the built in webcam no longer works.
The green light turns on, but I just get the crossed out camra icon in e.g. the Skype video options. No video.
I see there are no drivers yet for Win 8.1 on the Lenovo support site for the w520 camera.
In device manager it still shows the 2011 camera driver 1.1.0.1147 and says "This device is working properly."
But it does not work properly.
Did anyone get the camera to work or is it just a matter of waiting for a driver to be released eventually?
I tried uninstalling, reinstalling, camera is enabled in the Bios and permissions are set to give Skype and the camera app access to the camera. I also tried the W530 drives as was suggested elsewhere.
Thank you!
Solved!
Go to Solution.

try getting the communicastion utility installed under 8.1. The crossed image is the cameras security mode.
W530(2436-CTO): i7-3720QM, nVidia Quadro K2000M,16GB RAM, 500 GB hard drive, 128GB mSATA SSD, Ubuntu 14.04 Gnome, Centrino Ultimate-N 6300.
Yoga 3 Pro: Intel Core-M 5Y70, Intel HD 5300, 8GB RAM, 128GB eMMC, Windows 8.1, Broadcom Wireless 802.11ac.

Internet sharing no longer works after 10.5.3 upgrade

I'm aware that a number of people seem to be having wireless networking problems after upgrading to 10.5.3. I apologise if this has been covered somewhere else, but after trawling the forum I haven't been able to find any posts which deal with my specific issue. So any suggestions would be gratefully received...
My 24" 2.8GHz Intel iMac (purchased in Feb 2008) is connected to the internet via ethernet cable through a Speedtouch router supplied by my ISP, o2.
This internet connection is shared wirelessly with the other computer in the house, a G4 MDD running 10.3.9. After switching on Internet Sharing within System Preferences on the iMac, the G4 picks up and connects to the network created by the iMac, which is called (My Name)'s iMac.
All very straightforward, and until a few days ago this set up worked perfectly.
Then I decided to upgrade the iMac from 10.5.1 to 10.5.3, using the Combo updater downloaded from the Apple website.
As far as the iMac is concerned, the upgrade went perfectly and I have no problems whatsoever. I can still access the internet without difficulty as before.
The problem is with the G4. It no longer picks up the network from the iMac. The network's name ((My Name)'s iMac) no longer appears in the drop-down list under the Airport icon in the G4's menu bar (although this list does still contain the names of various neighbours' networks, as it did before, so the Airport in the G4 does still seem to be functioning). Internet sharing on the iMac is still switched on, and the Airport icon in its menu bar indicates that it is "transmitting", but the G4 is just not "receiving" any more. As a result, we can't get online on the G4.
I would be very grateful if anyone could shed any light on this problem. If there is any further information I can supply which might help, please ask.
Steve

Hi SteveSCA-
Greetings and welcome to the Apple boards
Have you tried powering everything down and then back up again?
Have you repaired permissions on the iMac?
Luck-
-DP

HT6114 AirPort Utility and AirPlay no longer works after 10.9.2 upgrade.

After upgrading to v10.9.2 last night, iTunes no longer shows my AirPlay speakers (attached to an AirPort Express) as available (other devices on same network see them fine still).
After upgrading to v10.9.2 the AirPort Utility can no longer see/connect to manage the Airport Extreme Time Capsule or the AirPort Express (the Wifi works, I'm associated to the SSID and sufring the web just fine, but I can no longer manage the devices - they don't even show up (marked as 'missing' with the option to 'forget' them in the GUI).

This worked for me.
Joseph Rose's solution (in another discussion) finally fixed Airplay for me. I now have mirroring and extended Airplay functions again. It was a long road, but in the end, removing Air Parrot and Air Display was the solution for me.
Solution:
Ran the Air Display uninstaller that I found by searching in spotlight.
Ran the Air Parrot removal tool & confirmed that the files were deleted based on instructions from their website.
Thanks to all that participated and spent their valuable time offering assistance!

Ipod shuffle no longer works after 10.7.5 upgrade!

I have the late 2009 iPod (Product) Red Shuffle 2 GB, always worked fine but after the Mountain Lion (10.7.5) upgrade it does not show up in iTunes.
Yes I have the latest iTunes and latest everything. I've already tried unplugging it and resetting the actual iPod. All the USB hubs should be fine I don't
even have all of them filled except for 1 that goes to the printer so I don't understand WHY it won't connect and show. It apparently is charging but I cannot
edit the songs on this iPod anymore. Any advice?
Thanks
A

Morning Antone76,
Thanks for using Apple Support Communities.
First, try the steps in the iPod Troubleshooting Assistant which applies to your iPod.
http://www.apple.com/support/ipod/five_rs/
For more information on this, take a look at this article:
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Best of luck,
Mario

Help! my printer no longer works after 10.4.10 upgrade

I have a canon pixma ip4200 printer, worked fine for 2 years. Since I upgraded to 10.4.10 my ibook can't find it. I've reinstalled the canon latest driver, setup utility, checked my usb ports (both fine) and cable, tried disk utility on my hard drive, tried the native printer setup utility, all to no avail. Anyone have any ideas? I'm terribly vexed! thanks.

Welcome to Apple Discussions!
Printers can be a real headache sometimes. You might see if Cannon has a support site that can help you with this. All of my HP's worked fine after the 10.4.10 update. But when I got the MBP, which is also running 10.4.10, my 1022 LaserJet didn't install the same, and shows the generic printer icon instead of the LaserJet icon. Sigh. But at least it works.
Did you uninstall the previous driver? Sometimes that is recommended before installing a new one. Did you try uninstalling the printer and then reinstalling it?
Good luck!

External mouse and keyboard no longer work after 10.8.5 upgrade

Today I upgraded from OSX 10.8.4 to 10.8.5 on my macbook pro 17". This upgrade caused by external mouse and keyboard to completely stop working. I tried installing the 10.8.5 "combo" install (http://support.apple.com/kb/DL1676) and also tried resetting the PRAM, but neither action had any effect.
I also tried restoring to an older time machine backup with 10.8.4, but could only figure out how to restore files, not the entire system.
I've lost a day of work at this point, I need help... How can I get back to 10.8.4 or get the mouse/keyboard working again on 10.8.5??

Try booting into the Safe Mode. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application uninstaller. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About

Mail no longer works after 10.5.1 upgrade

Mail didn't really work as well after my Leopard upgrade, but not horrible. Now that the 10.5.1 upgrade has been installed, it doesn't work at all. I get the error "Some actions taken while the account "XXXX" was offline could not be completed online. Mail has undone actions on some messages so that you can redo the actions while online. Mail has saved other messages in mailbox "On My Mac" in "On My Mac" so that you can complete the actions while online. Additional information: The IMAP command "APPEND" (to Drafts) failed with server error: Invalid mailbox name..."
I've made no changes to the mailbox or server settings and I can't get to the "On My Mac" because the app shuts down too quickly.
Frustration!
Anyone else with a similar problem or anyone know what to do to fix it?

It seems as though the problems are multiplying. Other programs are acting funny now - I had to force quit iTunes yesterday and then the Finder froze. Keyboard response was nil, so I couldn't Force quit the Finder, so I had to resort to more drastic measures. It took two reboots to get things running again. I'm going to review some other threads to see if there are any clues there, then probably wipe the hard drive and do a clean install if nothing else seems to address the issue.

Mythweb no longer works after PHP 5.3 upgrade

After upgrading to php 5.3 and manually patching up the configurations according to the news post, I'm now seeing the following error in /var/log/httpd/error_log when starting mythweb:
[Mon Sep 28 10:26:23 2009] [error] [client 127.0.0.1] PHP Fatal error: Call to undefined function posix_uname() in /home/mythtv/mythweb/includes/defines.php on line 21
Here is the php and all the split packages I've installed.
ocal/php 5.3.0-3
An HTML-embedded scripting language
local/php-apache 5.3.0-3
Apache SAPI for PHP
local/php-gd 5.3.0-3
gd module for PHP
local/php-mcrypt 5.3.0-3
mcrypt module for PHP
local/php-sqlite 5.3.0-3
sqlite3 module for PHP
Anyone knows what package posix_uname should be included in, or if it's no longer compiled in? Here's a mythtv ticket on the issue:
http://www.gossamer-threads.com/lists/m … its/388774
It suggested manually patching mythweb, but I prefer not doing that. Another suggestion was to use the php-process package on Fedora. Any idea what this now corresponds to in Arch, if any?

Thanks a lot. It was in my old php.ini file, but I missed merging that change into the new config file.

Satellite C850 - HDMI out no longer working after Windows 8.1 upgrade

Hi
can anyone help,
I have trawled the web to no avail.
I can no longer project the laptop screen to my plasma,
I have tried the Win + P buttons and nothing happens, turned on amd off with the hdmi cable connected etc.
Thanks in advance.

Hi Palacio
So you upgraded the system to Win 8.1 as mentioned here:
http://www.toshiba.eu/innovation/generic/windows8_1-message/
From my point of view some of the Win 8.1 drivers are either missing, not upgraded or not installed properly.
Check this driver installation order and update the drivers if essential:
Intel Wireless Display - Uninstall
2 Windows 8.1 update - Install
3 TOSHIBA Desktop Assist - Upgrade
4 Intel Display Driver - Upgrade
5 AMD Display Driver - Upgrade
6 Realtek Audio Driver - Upgrade
7 ATI HDMI Audio Driver - Upgrade
8 Intel PROSet/Wireless WiMAX Software - Upgrade
9 TOSHIBA System Driver - Upgrade
10 TOSHIBA Function Key - Upgrade
11 TOSHIBA Service Station - Upgrade
12 TOSHIBA eco Utility - Upgrade
13 TOSHIBA PC Health Monitor - Upgrade
14 TOSHIBA VIDEO PLAYER - Upgrade
15 TOSHIBA Blu-ray Disc Player - Upgrade
16 TOSHIBA Resolution+ Plug-in for Windows Media Player - Upgrade
17 TOSHIBA Media Player by sMedio TrueLink+ - Upgrade

Multitap on touchpad no longer works after Xorg 7.4 upgrade

Similar Messages

Maybe you are looking for