Multitenant Hosting Pack
Hi,
I looking to install Microsoft Lync Server 2013 Multitenant Hosting Pack, i have setup running lync 2013 standard edition. But for Microsoft Lync Server 2013 Multitenant Hosting Pack, i can only get deployment guide in download. I don't get any installer
to install this. Is there any installer available, what is requirement to get it. does it work independently or it will work as addon on over lync 2013 standard edition.
Hi,
The hosting pack is available through the volume licensing site if you are a volume licensed customer of Microsoft's.
If you want to download and install the Lync Server 2013 Multitenant Hosting Pack software, you need to log on to the Microsoft Volume Licensing Service Center at
http://go.microsoft.com/fwlink/?LinkId=238381
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support
Similar Messages
-
In post http://social.technet.microsoft.com/Forums/lync/en-US/8a22eed7-cc63-4f9e-b422-3c5a57fb32b0/lync-2013-multitenant-pack-and-lync-2010?forum=lyncdeploy , which was already answered, the answer is no, you cannot migrate from 2010 on-prem. to lync 2013
hosted pack.
Trying to get my head around #1 -why, and #2 -what other alternatives are available.
Lisa answered that there can only be 1 CMS per forest. Is it one CMS per forest, or
one CMS per front end pool in a forest? Meaning you can have different CMS pools. If that were true, we could migrate users to a different front end pool in a coexistence scenario between 2010 on-prem to 2013 hosted pack.
Has anyone done this?
This is tough. I guess a cutover then from 2010 to 2013 multitenant hosted pack would be what?
1. Uninstall 2010, decommission users, decom environment/servers.
2. Fresh install in same AD environment of 2013 hosted pack.
That's tough for our users to make such a transition and have potentially days of downtime.
Is there no other way to do this?
JoshIt is one CMS per forest.
There is no official guide to move from Microsoft Lync Server to Microsoft Lync Server Multitenant Hosting Pack.
This topic has been discussed several times before:
http://social.technet.microsoft.com/Forums/lync/en-US/9d438b55-ec53-478a-9247-6d355abedb78/started-installing-lync-2010-enterprise-discovered-multitenant-hosting-pack-do-i-need-to-uninstall?forum=ocsplanningdeployment
http://social.technet.microsoft.com/Forums/lync/en-US/ad0b77ca-d47e-457b-8f77-33f84409a119/schema-update-lync-hosting-pack?forum=ocsplanningdeployment
Lisa Zheng
TechNet Community Support -
Lync multitenant hosting pack install guide
Hi
any one have Lync multitenant pack for hosting installation/deployment guide to setup for lab, tried Microsoft deployment guide but that is not more usfull. if some one have the guide or step by step share the details.For Lync Server 2013 Multitenant Hosting Pack, you should check the deployment guide below:
http://www.microsoft.com/en-in/download/details.aspx?id=39101
Lisa Zheng
TechNet Community Support -
Hi everyone!
I have 2 Lync Server Setups. In 1st setup I have deployed "Lync Server 2013 Multitenant Hosting Pack" and in 2nd setup I have deployed "Lync Server 2013 Standard Edition". Both Setups
are isolated and have their independent SQL servers and ADs. Now the problem is I am unable to get the edition of Lync Server through powershell.
When I run Get-CsServerVersion command, it returns same output on both setups.
#For Lync Hosting Pack
PS C:\Users\administrator> Get-CsServerVersion
Microsoft Lync Server 2013 (5.0.8308.0): Volume license key installed.
#For Lync Standard
PS C:\Users\administrator> Get-CsServerVersion
Microsoft Lync Server 2013 (5.0.8308.0): Volume license key installed.
What can be the way to determine the edition of Lync Server through Powershell or .NET?
Thanks in advance.
Rizwan Ahmed. Software Engineer - Microsoft Lync | Exchange | SharePoint | Blackberry Enterprise Server | .NETHi,
So far, I don’t know how to identify with Lync Powsershell or .NET as well.
However, you can identify from Lync Server Control Panel. For Lync Server Multitenant Hosting Pack, it is incompatible with Lync Server Control Panel, this means you should use the Lync Server Control Panel only in read-only mode. For example, enabled
users are not displayed in the User section of the Lync Server Control Panel. So you can identify with the way of enabling users on Lync Server Control Panel, Lync Server Standard/Enterprise Edition will show the users on Lync Server Control Panel.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
Lync 2013 Multitenant hosting meeting URL
I have a Lync 2013 multitenant hosting environment. Lync Meeting Add-in for Microsoft Outlook 2013 closes itself a split second after it opens, no
error, no pop-up, and no message to say what’s going on. Yet within the Lync client, I can still start an ad-hoc meeting (“Meet Now”), But the
Meeting Entry Info URL looks like this conf:sip:bongani@......... Instead of a norma https link. I also have the event below on the Lync server event
viewer. but the meeting URL are configured in the format https://meet.hosterdomain.co.za/tenantdomain.co.za
Event ID 32148 – LS User Service
A user tried to create a conference with no Simple URL of type Meet available. This configuration will not work for scheduled conferences. Ad-hoc
conferences may be created but join functionality will be impaired.
And if I do a Set-CsSimpleUrlConfiguration -UseBackEndDatabase $false as recommended. I get the following when I run enable-cscomputer.
WARNING: No patterns found. Skipping rewrite rules creation for Meet simple URLs.
WARNING: No patterns found. Skipping rewrite rule creation for dial-in conferencing.
WARNING: No patterns found. Skipping rewrite rule creation for Web Scheduler.
WARNING: No patterns found. Skipping rewrite rule creation for dial-in conferencing.
WARNING: No patterns found. Skipping rewrite rule creation for Web Scheduler.
WARNING: "Enable-CsComputer" processing has completed with warnings. "5" warnings were recorded during this run.
WARNING: Detailed results can be found at "C:\Users\xxx\AppData\Local\Temp\Enable-CsComputer-26374787-f6b5-4a07-b8f4-7bd819d3ffc3.html".
I tried following http://www.lyncexch.co.uk/lync-2013-hosting-pack-tenant-meet-dialin-urls/ but the URL doesnt change.
Not sure if all these are related or what needs to be corrected please assist.For Event ID 32148 – LS User Service, you can refer below links
http://www.lyncexch.co.uk/lync-2013-hosting-pack-tenant-meet-dialin-urls/
http://www.lyncexch.co.uk/2014/02/
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali -
Hi,
Who are all the third party vendors that can integrate with Lync 2013 Multi-tenant hosting pack V2 features that are supported Via 3rd party.
1) Call park
2) Outgoing DID manipulation
3) E-911
3) Dialplans & Policies
4) Support for Analog devices (e.g. FAX)
5) Response groups
6) Network QoS - DSCP
7) Phone number management
8) IM/P & Voice with Skype.
9)Inteoperability with on-premises video conferencing systems
Regards,
SRHi,
Base on my understanding, as it is the Mutli-Tenant environment, in internal DNS server, there is no need to add the DNS A record
lyncdiscoverinternal. However, you can try to add the DNS record in internal DNS server to test the issue as well.
Also, please make sure you have updated both Lync Server 2013 and Exchange 2013 to the latest version. If not, update it and then test again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
Lync Hosting Pack and Public IM
Hello
I have Lync Server 2013 installed and using Lync Hosting Pack. I am trying to enable Skype connectivity for my users but have encountered some issues. On a global level I have enabled the MSN Public IM Service Provider. When I run the "Get-CsTenantPublicProvider"
I get the following error:
Get-CsTenantPublicProvider : Cannot find public internet connectivity certificate "PICWebService".
At line:1 char:1
+ Get-CsTenantPublicProvider -Tenant 1a82fa12-bff0-42a2-a641-e56e5e80647f
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Get-CsTenantPublicProvider], PICCertificateException
+ FullyQualifiedErrorId : Microsoft.Rtc.Management.Hosted.PICCertificateException,Microsoft.Rtc.Management.Hosted.
GetTenantPublicProviderCmdlet
When I try and send an IM to a Skype user, I get the following error:
504 Server time-out
ms-diagnostics: 1063;reason="Cannot route to blocked IM Service Provider";domain="outlook.com";fqdn1="federation.messenger.msn.com:5061";source="lync.domain.com";OriginalPresenceState="0";CurrentPresenceState="0";MeInsideUser="No";ConversationInitiatedBy="6";SourceNetwork="5";RemotePartyCanDoIM="Yes"
Does anyone have any ideas?
PeterEric
Yes I did. I suspect that this may be part of the problem. When I run the following command, I receive an error telling me that I can only have certain providers:
Set-CsTenantPublicProvider -Tenant 1a82fa12-bff0-42a2-a641-e56e5e80647f -Provider "Skype"
Set-CsTenantPublicProvider : Public provider "Skype" is invalid. The public provider can only be "AOL", "WindowsLive",
or "Yahoo".
At line:1 char:1
+ Set-CsTenantPublicProvider -Tenant 1a82fa12-bff0-42a2-a641-e56e5e80647f -Provide ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Set-CsTenantPublicProvider], ArgumentException
+ FullyQualifiedErrorId : System.ArgumentException,Microsoft.Rtc.Management.Hosted.SetTenantPublicProviderCmdlet
When I run Get-CsTenantPublicProvider I receive an error.
Any ideas?
Regards
Peter -
Hello
I currently have a deployment of Lync Hosting Pack V2 on Lync Server 2013. I give my users the ability to use Enterprise Voice features. However, when a user from Tenant A calls a user from Tenant B, the users display name is presented as opposed to their
caller ID. Is there anyway for me to prevent this from happening?
Regards
Peter DeeganHi,
Did you do Lync federation between the two Tenants?
Please try to configure Caller ID or set transfer rule on Lync Server Control Panel Voice Routing interface.
More details:
http://technet.microsoft.com/en-us/library/gg412757.aspx
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
Lync 2013 Hosting pack tenant meet url returns 404
Hi all,
I have a 2 problems in the Hosting pack:
1. Meet urls are correctly generated for tenants (IE https://meet.hoster.com/tenantdomain/user/confID) but they return a 404 when browsing to the meeting from a browser
2. Office web apps presentations just never work. It just says that it cannot connect to the presentation server.
For problem 1, what I tried was:
1. Set Set-Cssimpleconfiguration -UseBackendDatabase $True -Tenant <TenantID>
2. Tried repairing the IIS Rewrite module as per http://social.technet.microsoft.com/Forums/lync/en-US/e1fbdaa9-0961-4171-ab51-91b8d37432de/action?threadDisplayName=lync-meetings-not-available-404-for-every-url
3. Made sure all my domain maps are correct
4. All certs seem 100% fine.
What is weird is:
https://dialin.hoster.com/dialin - works
https://meet.hoster.com/meet - works (Default cannot join the meeting page)
https://meet.hoster.com/tenantdomain/tenantuser/confid - Does not work
Any help will be greatly appreciated.
\\Tjopsta// http://www.tjopsta.netHi,
For first question, try the following steps:
Remove IIS URL Rewrite Module 2 in Control Panel.
Run Step 2: Setup or Remove Lync Server Components with Lync Server Deployment Wizard.
For second question, check if you can access Office Web Apps Server discovery URL via browser.
Check if you associate Office Web Apps Server with Front End pool.
Regards,
Lisa Zheng
Lisa Zheng
TechNet Community Support -
Lync 2013 Hosting Pack v2 Skype integration
I have a Lync 2013 Hosting deployment. Hosting Pack v2 supports public IM with Skype, but in the guide the setup steps are missing. I configured the Federation
(federated provider ect.) like an on premise deployment and enabled Public IM connectivity on the Tenant:
Identity
: Global
AllowedDomains
: Microsoft.Rtc.Management.WritableConfig.Settings.Edge.AllowList
BlockedDomains
AllowFederatedUsers : True
AllowPublicUsers
: True
SharedSipAddressSpace : False
When I add a skype user to my buddy list, I cannot see the presence and in the Lync Front End Logs I get the following failure that the domain is not part of the tenant allow list.
Message-Body: <reportError xmlns="http://schemas.microsoft.com/2006/09/sip/error-reporting"><error toUri="sip:***[email protected]"
callId="c46a551b0e28439482edd9f3cbbc4a78" fromTag="eeef2d866f" toTag="F89423B3CF5DDBEF396B7A8FD53211EF" contentType="application/sdp;call-type=im" responseCode="403" requestType="INVITE"><diagHeader>27000;reason="To-Uri
Domain is not in the sender-tenant allow list";source="FRONTEND.DOMAIN.COM";appName="OutgoingFederation";OriginalPresenceState="0";CurrentPresenceState="0";MeInsideUser="Yes";ConversationInitiatedBy="6";SourceNetwork="5";RemotePartyCanDoIM="Yes"</diagHeader><progressReports/></error></reportError>$$end_record
What can I do to enable public connectivity on the tenant without adding the skype Domain (could be any Live ID) to the tenant allow list?
GreetingsDid you provision Skype Federation for the specific domain?
https://pic.lync.com/provision
Download Provisioning Guide for Lync-Skype Connectivity
http://www.pro-lync.be/blogs/lync2013/archive/2013/05/31/download-provisioning-guide-for-lync-skype-connectivity.aspx
Howto enable audio between Lync & Skype (What the Skype provisioning guide
is not telling you)
http://www.pro-lync.be/blogs/lync2013/archive/2013/06/06/howto-enable-audio-between-lync-amp-skype-what-the-skype-provisioning-guide-is-not-telling-you.aspx
- Belgian Unified Communications Community : http://www.pro-lync.be - MCM/MVP/MCT -
Lync 2013 hosting pack - CU July 2013 Support
Does the Lync 2013 Hosting Pack support the cumulative update of July?
What are the known issues?My experience was running the LyncServerUpdateInstaller and run Install-CsDatabase on the servers. I haven't had it break mobility though.
With that in mind so far you only do that when you first install it because there hasn't been any further updates to Lync 2013 Hosting since it was released.
I have a ticket opened right now about the bad documentation on the deployment guide. My simple url wasn't working because the document says to provide -Tenant $GUID for the meeting URL but it didn't work 100%. However it worked sometimes!!
The Microsoft tech pointed me to a guys blog (yes thats right.. a non-microsoft blog) that shows to drop the -Tenant $GUID from the meeting URL but make sure you keep the -Tenant $GUID for the dialin url.
I basically wined and told them I wanted the 100% right way to do it. I wanted them to tell me either the deployment guide was wrong or there was a bug. Two weeks and no reply yet and they just update to say "They are still looking into it"
Not to mention when I opened the ticket they tried saying "Well this is still a new product". I said its been out for almost a freakin year and its not a NEW product. -
Lync 2013 Hosting Pack - cannot join external non federated meetings anonymously with desktop client
Hello,
I Have a setup of LHP 2013. We have been testing federation and connections to external on-premises meetings.
Right now users with lync desktop client (2013 and patched) cannot connect to external 3rd party meetings without using the ?SL=1 and using the Wep App.
Desktop Client gives error on log file:
ms-user-logon-data: RemoteUser
Authentication-Info: TLS-DSK qop="auth", opaque="58FBAFA0", srand="0B8651AD", snum="15", rspauth="b63e033e6376b48ec973718f7369e3b90b0d75ba", targetname="lyncfe2.hoster.fi", realm="SIP Communications
Service", version=4
Content-Length: 0
Via: SIP/2.0/TLS 172.20.10.7:49680;received="public.ip";ms-received-port=55863;ms-received-cid=48400
From: "cloud.testuser"<sip:[email protected]>;tag=8f59b0fb81;epid=c7d2e31185
To: <sip:[email protected];gruu;opaque=app:conf:focus:id:5P20J0SK>;tag=C258840F87FD8713D4ADE01307F32C5B
Call-ID: 386e091eb7794fb286b858984349fccd
CSeq: 1 INVITE
ms-diagnostics: 27000;reason="To-Uri Domain is not in the sender-tenant allow list";source="LYNCFE2.hoster.fi";appName="OutgoingFederation"
Server: OutgoingFederation/5.0.0.0
From some old post I have read that was a bug in Lync client that did not allow fail-back to anonymous login with non-federated lync organization, but this has been fixed long ago.
If I do setup a federation beetween the organizations the meetings connect ok.
Thanks for help!
BR, JouniHi Johan,
Lync client in test has been fully updated.
I Think I found what was causing this. In my tests, I added and removed domains from allowed and blocked domains list, in tenant config.
First after tenant organization has been provisioned the AllowedDomains looks like this:
Get-CsTenantFederationConfiguration -Tenant 10828ff2-165d-440f-9c00-6ce374ff0c6d
Identity : Global
AllowedDomains : Microsoft.Rtc.Management.WritableConfig.Settings.Edge.AllowAllKnownDomains
BlockedDomains : {}
AllowFederatedUsers : True
AllowPublicUsers : True
SharedSipAddressSpace : False
And joining to non-federated meetings works correctly.
After fiddling with the allowed and blocked domains settings (adding and removing domains) settings look like this:
Identity : Global
AllowedDomains : Microsoft.Rtc.Management.WritableConfig.Settings.Edge.AllowList
BlockedDomains : {}
AllowFederatedUsers : True
AllowPublicUsers : True
SharedSipAddressSpace : False
When I check what the "AllowList" keeps in, it is empty as it should:
$tenant = Get-CsTenant | Where-Object {$_.Name -eq "tenantname"}
$x = Get-CsTenantFederationConfiguration -Tenant $tenant.TenantId
$x.AllowedDomains
AllowedDomain : {}
If I set the AllowedDomain backup to original form meeting connections begin to work.
$all = New-CsEdgeAllowAllKnownDomains
Set-CsTenantFederationConfiguration -Tenant 10828ff2-165d-440f-9c00-6ce374ff0c6d -AllowedDomains $all
But now im just not very sure how I should setup the federation settings as per tenant/ExternalAccesspolicy/AccessEdgeConfiguration.. hmm..
BR, Jouni -
Exchange 2010 Domain Name change in a multitenant (hosted) environment
Is there a way to change a domain name from one of our domains?
We have exchange 2010 SP1 in hosted mode so we have several domains we deliver to our customers.
However, now 1 of our customers would like to change their domain name.
For example abc.com should become 123.com
To make it even a litle bit more complicated, in the first instance they want to add the 123.com domain so they receive emails on both domains. After a month they want to delete the old domain ( abc.com ) and keep on receiving emails on the new domain
( 123.com ).
Please keep in mind that the other domain that we also provide must not be affected.
Any help would be grate as I am stuck on this one.
I simply don't know the correct powershell commands.Hi Peter,
I read the email and as I was writing a reply I thought by myself, why not share it with the rest.
I am sure other people need this to so I copy paste it in here :-):
===================================
Hi Peter,
If this helps you out, the only thing I want back is for you to help 3 others and share this message so they help out other people aswell. :-D peace
Unfortunately there is no way according to microsoft ( as far as I am aware ) to make a domain change in the hosted edition and for this reason I had to figure it all out myself.
I am no scripter so I didn't build a tool for it, sorry.
I will send you all the information you need.
1- add the accepted domain: New-AcceptedDomain -Name NameOfOrg -Organization ForWhichDomainWillThisBeTheAcceptedDomain -DomainName NewDomain.Eu -DomainType Authoritative
2- to create an alias ( tenant admin )
Import-CSV name-of-textfile.txt | foreach-object {Set-Mailbox $_.alias -EmailAddresses @{add=$_.smtp1}}
The text file has to be in the following format:
alias,smtp1
firstalias,newemailaddress
secondalias,newemailaddress
etc.
3- Make the new alias the primarysmtpaddress ( main exchange admin ):
Import-CSV name-of-textfile.txt | foreach-object {Set-Mailbox $_.alias -primarysmtpaddress $_.smtp1 -emailaddresspolicyenabled $false}
The txt file should be in the following format:
alias,smtp1
domain\alias1,newemailaddress
domain\alias2,newemailaddress
etc.
4- Rename the alias ( tenant admin ):
Import-CSV name-of-textfile.txt | foreach-object {Set-Mailbox $_.alias -alias $_.smtp1}
The txt file should be in the following format:
alias,smtp1
alias1,newalias1
alias2,newalias2
etc.
5- Change UserPrincipalName (main exchange admin ). This is the username to sign in to OWA
Import-CSV name-of-textfile.txt | foreach-object {Set-Mailbox $_.alias -userprincipalname $_.smtp1}
The txt file should be in the following format:
alias,smtp1
domain\alias1,newemailaddress
domain\alias2,newemailaddress
etc.
6- Change displayname (tenant admin ):
Import-CSV name-of-textfile.txt | foreach-object {Set-Mailbox $_.alias -displayname $_.smtp1}
The txt file should be in the following format:
alias,smtp1
alias1,displayname
After a while you might to remove the previous email address ( i waited for this for 3 months! 1 month is way to short for people to communicate it, trust me.. ):
7- Import-CSV name-of-textfile.txt | foreach-object {Set-Mailbox $_.alias -EmailAddresses @{remove=$_.smtp1}}
The txt file should be in the following format:
alias,smtp1
alias1,OldEmailAddress1
alias2,OldEmailAddress2
Andre
Peace -
Lync 2013 Multitenant - Sign-in not working
Hello,
I am working on deploying the Lync 2013 Multitenant hosting pack in a staging environment for testing with the eventual goal of putting this into a production environment. So far I am working with a single front-end server routed through an F5 load balancer
using their iApp application template for Lync 2013. We are attempting to work with a very simple deployment that we scale out as additional features/capacity is needed.
The issue I'm having is during the sign-in process. I have provisioned a tenant and a user within that tenant and I am able to use the Get-CsTenant and Get-CsUser commands to view the tenant and user. I have also established the following DNS entries for
the tenant.
A record: lync.<hosting domain> - Pointed to the public IP address for the Lync application through our F5.
A record: lyncpool01.<hosting domain> - Pointed to the public IP address for the Lync application through our F5.
SRV record: _sip._tls.<tenant domain> (priority 0, weight 0, port 443) - Pointed to lync.<hosting domain>
SRV record: _sipfederationtls._tcp.<tenant domain> (priority 0, weight 0, port 5061) - Pointed to lync.<hosting domain>
When I attempt to sign in to my test user externally using the Lync 2013 desktop client, I do get a certificate warning on the client that lync.<hosting domain> (cert is lyncpool01.<hosting domain>) is attempting to handle the request, but when
I accept the cert, the client waits for about 30 seconds and then gives the error "Lync couldn't find a Lync Server for <tenant domain>. There might be an issue with the Domain Name System (DNS) configuration for your domain. Please contact your
support team.". I can't figure out where this is falling apart or what name the Lync client is attempting to reach, and enabling event logging for Lync has revealed no helpful information.
Is there any assistance you can give?Hi,
Agree with PaulB_NZ.
As Lync 2013 Multitenant only have external and federation users, you need to deploy Edge Server in the DMZ zone to support external and federation access.
What's more, if you want to use Lync mobile clients you also need to deploy a Reverse Proxy in the DMZ zone.
More details:
https://technet.microsoft.com/en-us/library/gg398069.aspx?f=255&MSPPError=-2147217396
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
I am working on setting up Lync 2013 in an environment that has multitenant Exchange running. We have a HLB to handle the load balancing and certs. Right now all exchange users no matter what domain they are in they are redirected to a single
connection point on the HLB that uses a cert with only one domain name on it.
I can not seem to get the Lync system to do the same. any suggestions would be greatly appreciated. Thanks in advance!!Hi,
As I know, it is supported if your users want to sign in with one sip domain. You may need to get further information from your certificate provider.
You can refer to the link of “Microsoft Lync Server 2013 Multitenant Hosting Pack Deployment Guide”:
http://www.microsoft.com/en-in/download/details.aspx?id=39101
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support
Maybe you are looking for
-
HT204478 How do i change the location of a photo in new Photo
I just upgraded to the new photo app on my mac and the locations that it says where the photos were taken is wrong, but I don't see a way to change it. Help please. Thanks. H To clarify the metatag location within the photo, not the location of the p
-
I want SQL query to check if any of our important concurrent programs
I want a sql query to check if any of our important concurrent programs are currently scheduled or not
-
Hi , We would like to see a detailed report for Production oreders, which can show us the break down of Materials issued, Costs,Planned, Actual, Labor Confirmed ,Variance,total debits and credits etc. [Please don't advise for single Prodction order u
-
Windows media player for windows7 firefox plugin is not working
Hi, i am trying to get the windows media player for windows 7 x64 firefox plugin to work and it does nothing a black screen is all i see. please help me with this. thanks.
-
My saved tabs have been deleted
hello.i saved about 200 tabs. but suddenly they've been deleted. and i can't restore them. please help me my saved tabs were so important and i need them.