Multitouch trackpad for Mac Pro

Having used my Macbook for editing for quite some time I've gotten really used to the multitouch track pad scrolling back and forth in my timeline and just point and clicking in general. I'm having a hard time getting used to using a mouse now. I have an optical trackball with lots of buttons and scroll wheel but it is still not as convenient to me as the trackpad of my laptop. I can't find anything like it for the MP. Anyone out there ever see anything like this or know how to disassemble a Macbook to hook up its trackpad via usb?

So I just got the Adesso Easy Cat 2 button track pad. So far so good. It's no Apple track pad but not bad. For some reason it doesn't have the horizontal scroll bar like it show in the picture and says it has, even though the model number on the pad is right so hopefully Adesso can address that. It seems like a decent pad though. I can left and right click on the pad and reprogram the 2 physical buttons to do other things. It can be programmed specifically to each program so it can function differently with different programs. Just thought I'd put in my 2 cents so far!

Similar Messages

  • GeForce 7300 GT Upgrade Kit for Mac Pro?? G5?

    Hi,
    Just found this on the apple store:
    http://store.apple.com/Apple/WebObjects/ukstore.woa/wa/RSLID?mco=1643C421&nplm=M A567
    "NVIDIA GeForce 7300 GT Graphics Upgrade Kit for Mac Pro"
    Why is it only for mac pro? its PCI express & my g5 is one of the late 2005 models and it has PCI Express so am i wrong in thinking that this should work fine or is it something to do with the new intel architecture?
    If i remember correctly i could have chosen this card or a very similar one when i configured my G5.
    Thanks

    That card is only for the Mac Pro, as it says.
    When you ordered your G5, you had the choice of the nVidia 6600 (or 6600LE), nVidia 7800GT, or the Quadro FX 4500.
    The 7800GT that you could have ordered with your G5 is close in performance to the ATi X1900XT that is an option on the Mac Pro. The 7300GT that you're looking at is an entry level card, which the 7800GT definitely is not.
    The 7300GT and the X1900XT are both Mac Pro only due to the ROM on the card, which is designed to work with the EFI booting hardware that the Mac Pro uses. The G5s used Open Firmware, which requires a different ROM on the video card. So, even though both your G5 and the Mac Pro are PCI-Express based, these video cards are not compatible.
    Now, most PCI-Express cards that you look at for, say, external SATA, will probably work in both the G5 and the Mac Pro. You'd still want to check the specs to be sure, however.
    If you're looking for a new video card to replace your (presumably) nVidia 6600, your only real option is the ATi X1900 G5 edition. This is a different card than the X1900XT that's offered for the Mac Pro.

  • ATI 5770 1GB Video Card For Mac Pro dvi hdmi cable

    I am sending video signal over a 50FT HDMI To DVI from my Mac Pro (3,1) via ATI 5770 1GB Video Card For Mac Pro (5.0 GT/s) (181062917108) and I cannot get a constant signal to my TV. The signal stays on for a few seconds or several hours or my TV (Samsung) says there is no signal or I get just a gray static screen.
    I never had a problem before with my previous video card the 512MB nVidia GeForce 8800GT with a 25ft long cable. Any ideas people?

    A cable of about 5 meters (16 ft) can be manufactured to Category 1 specifications easily and inexpensively by using 28 AWG (0.081 mm²) conductors.[114] With better quality construction and materials, including 24 AWG (0.205 mm²) conductors, an HDMI cable can reach lengths of up to 15 meters (49 ft).[114]
    from: http://en.wikipedia.org/wiki/HDMI
    You may need a higher-quality cable or a lower resolution for your display to make this work without an HDMI Repeater.

  • "fire wire" video capture cards for mac pro

    ....Have Power Mac ver. 10.9.5 system Maverick w/ 4 MB RAM & am trying to locate hardware for:
    acquiring "FIRE WIRE" video capture cards for mac pro.... ? Any suggestions....?(Just purchased Adobe CS 5 premium)

    Your question doesn't make much sense.
    What type of Mac Pro do you have? Is it the new black cylinder or the old style silver tower?
    Firewire is built-in to the old models & the new Mac Pros can use Thunderbolt to Firewire converters to capture from Firewire sources.
    Maybe like this http://store.apple.com/us/product/MD464ZM/A/apple-thunderbolt-to-firewire-adapte r
    Many older cameras used Firewire for capturing, but that has been replaced by other connection types. What are you trying to capture from?

  • Reviews for ATI Radeon HD 4870 Graphics Upgrade Kit for Mac Pro?

    There's no review at the Apple Store on this [ATI Radeon HD 4870 Graphics Upgrade Kit for Mac Pro (Early 2009 or Early 2008)|http://store.apple.com/us/product/MB999ZM/A?fnode=MTY1NDA5OQ&mco=NDE4NDMx OA]. Googled and found nothing related to the Mac kit. Mostly PC based.
    Should I consider this card? I need a spare/replacement graphics card for my Mac Pro (early 2008). The NVIDIA GeForce 8800 GT card has failed me twice.

    Just came out on barefeats:
    http://www.barefeats.com/nehal14.html
    Shows new drivers with 285, also compares 4870.
    If you play a lot of games on the windows side, you might also want to consider the 4890. I has recently became flashable (if you're into that kinda thing). It has a lot more leeway to be overclocked. Close to (or if your lucky) hitting the 1 Ghz core clock speed, gives very close comp to the 285, and at fraction of the price. You can get an XFX 4890 on newegg for $195.

  • Accessories for Mac Pro

    Hi, guys. I have a problem here. I am looking for something that can protect against dust or something like that. Because my room is really not that clean, which means there's a lot of dust. I am worrying about the Mac Pro that will "eat" some dust. Question is " Where can I buy that kind of accessories for Mac Pro, like clothing or case?"
    Thanks a lot. Oh, I forget there is also a LED cinema display that need to be protected

    Clean your room. Nah, J/K
    (no, but seriously...clean your room)
    Here are some neat looking ACD covers.
    http://www.radtech.us/Products/iMacDesktop/
    I guess you could also use this: (temporarily)
    http://www.flickr.com/photos/neilchristie/3515875014/

  • What is the best software for home office for mac pro ?

    What is the best software for home office for mac pro ?

    Mac-HaBu X 12.2.0.3.841
    Gnucash 2.4.11
    QuickBooks Pro 2013 14.0.3 R4
    MoneyWorks Gold 6.1r5
    MoneyWorks Express 6.1.r1

  • Printer wireless for Mac Pro and  I pad.?

    Need to get a printer wireless for Mac Pro  also can be use with the IPad  this is possible? Thank  you

    Any of the current HP e-Print capable printers support AirPrint capabilities without even having to enable the e-Print stuff that's purely HP.
    Also, make sure your exisiting network router at home supports multicast protocols.  The majority of retail routers support this and you won't have issues, but I've run into problems with carrier issued modem/router combo units from Comcast made by Arris that don't support multicast and other protocols and hence, will not allow for the necessary discovery protocols for AirPrint to work across the wired or wireless network.  In cases like that, the fix is to place those units in "bridge mode" and then use your own router behind it that doesn't restrict that capability.  Just FYI.

  • Is AirPlay Mirroring available for Mac pro?

    Is AirPlay Mirroring available for Mac pro?
    Need to share my MAC screen with apple TV display and eliminate the cable.

    It's a glaring omission in my view, but Apple's focus seems to be on phones and tablets not OS X.
    Send some feedback:
    http://www.apple.com/feedback/appletv.html

  • Where can I find internal DVD replacement for Mac Pro 2008?

    My optical DVD drive on my Mac Pro (3,1) has been dead for a good long while. 
    Looking for a cheap replacment.  Just saw OWC stopped carrying them.  Any leads?

    For Mac Pro 3,1 and earlier (2008 and previous) you need an IDE/ATA drive like this one:
    http://eshop.macsales.com/shop/superdrive/Mac_Pro_Xeon

  • Is it possible for Mac Pro 724 Windows xp to install?

    Is it possible for Mac Pro 724 Windows xp to install?

    I really don't like any "closed" or sealed technology.
    About half way down the page are bare 2.5" enclosures for $50 range
    http://eshop.macsales.com/shop/firewire/add-ons-and-hubs/enclosure-kits
    http://eshop.macsales.com/shop/firewire/on-the-go
    Grief! Yes, that is costly "solution" I looked on Amazon for USB2 for SATA drives and $40.
    For that kind of price, MacGurus specializes in some hot-swap FW/USB/eSATA cases so you can use it with multiple drives (giant floppy).

  • Can a shell for mac pro 13" be used with a mac pro Retina ?

    Can a shell for mac pro 13" be used with a mac pro Retina ?
    Thank you.

    No.
    The entire enclosure is tuned for both external jack placement, EMI-RFI radiation, airflow, and for cooling. You need exactly the correct shell and fans for the electronics you wish to install in it.

  • Any recommendations for a new Graphics card for Mac Pro?

    Any recommendations for a new Graphics card for mac pro edit in Premiere 2014 and I need to have   output to a monitor my current graphics card is ATI Radeon HD Graphics 5870 1024 MB I find better for what I need?

    Look at this EVGA card for the Mac

  • Is July 9 internet issue a problem for Mac Pro users?

    Is the July 9 internet issue a problem for Mac Pro users or has Apple taken care of this issue in updates?

    It is a only a problem for users affected by the malware that replaces their DNS IPs on their macs. They already have a serious problem which they should fix. Follow the url in sig's post to determine if you are infected and how to remove it.

  • Best Multifunction Printer (with FAX) for Mac Pro running OS 10.4.11?

    What is the Best Multifunction Printer (with FAX) for Mac Pro running OS 10.4.11? thanks for your advice.

    sad to say, the mininum MAC osx version for the printers should be at least 10.6

Maybe you are looking for

  • Linking Between Sales Order And Purchase ORder

    Dear Gurus,   How to link the Sales Order Number and Purchase Order Number. I know the Sales Order Number and I need the tables from which I can know the Purchase Order Numbers for that Sales Order Number. Points will be awarded. Thanks, Ravi

  • Problem in accessing application server file using open dataset

    Hi All, I am trying to access application server file using open dataset command, its working fine for normal path which imention. But when i am giving path of XI server file, its not working. How to access XI server file using open dataset. Please l

  • Missing 'Sensors' tab in Jdev 11g

    Hi, I'm using JDeveloper 11.1.1.2.0 and I need to create a BAM sensor. I'm following the tutorial included in this book: http://www.oracle.com/technology/products/soa/soasuite/11gthebook.html on page 391, first line says: "Click on the Sensors tab to

  • Why does iPhoto blow up when I click on import?

    I open iPhoto, then click on "import to library" so I can select a file to import, and iPhoto blows up right away. Up comes an long error of some kind that says the error report will be sent to Apple. And, here I am!

  • Fire fighter intial log on

    1. When I try to log in to FF.. i am told " contact administrator for inital log on " 2. So far OK...but the  problem is I am  the adminstrrator !! --what does the admin need to  do ? Thnaks