Multitouchpad drivers won't install with Windows XP and bootcamp

I just got a MacBook pro with the multitouch trackpad. I have repeatedly reinstalled the driver then told windows to rescan the system, it identifies the trackpad then says "a problem occurred during hardware installation" and the trackpad does nothing at all. I am using Windows XP Pro SP2 and the drivers on my Mac install disk for 10.6.4.

That would probably be what is wrong. All the drivers worked except the ethernet and touchpad. I guess I will be using the wireless and a mouse.

Similar Messages

WPSM54G drivers won't install on Windows 7

I've just migrated to Windows 7 (Home Premium) and found that my WPSM54G driver(s) won't install. The installer error message is essentially: Windows 7 is not supported. Is there any way to override this behavior? My guess is that the driver(s) will work just fine, if they could only be installed. Alternatively, when is Linksys likely to fix the problem?
Solved!
Go to Solution.

This problem IS NOT solved by the above. Sure you can print with this option, but what about scanning and faxing? The WPSM54G is an ALL IN ONE sever and not just a print server. When is Linksys going to get updated software out? Why am I ALWAYS having issues with Linksys products that are software or firmware based.

HP Deskjet 350 install with windows 7 and usb to centronics cable

I'm trying to install the 350 (small portable color) on a Sony Vaio with Windows 7. The vaio doesn't have a centronics or ir port, so I picked up a usb to centronics cable, but I'm having trouble with the computer not being able to locate the printer even though it's attached via the usb port. I've downloaded the driver and installed it, but no luck. Any advice?
Thanks,
Patricia

Alright, sounds like you are sharing your printer but you are having some difficulty doing so. What I am going to suggest is that you remove the drivers that you have and follow the instructions from one of my colleagues, Shane, on how to assign an alternate driver (or you actually can search for the Deskjet 9800 driver) :
http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers-e-g-Windows-8/How-to-Assign-Alterna...
Follow those instructions and share the printer again and let me know if this resolves your issue!
Have a great day

Will FSX work good with Windows 8 and Bootcamp?

Firstly, does Windows 8 work with Bootcamp?
Secondly, does FSX run with Windows 8 64-bit? If it does, how good?
Thirdly, would you recommend another OS for running FSX on Bootcamp?
Thank you
- Lorenzo

It should as long as the graphics chip installed on your Mac is stated in the specs of the software as compatible.
Most games are very particular about desiring a specific graphics chip. If it is not there, it will probably have trouble unless the software provides its own software based graphics acceleration.

All in One won't install with Windows 7

I have installed all the drivers for my All in One (Officejet 5610) however the printer itself won't connect and install. It goes all the way up to step 5/8, but then it just gives me an error. Please help!
PS: I installed the drivers using the Windows Vista disc included with my All in One since I figured it was the closest to Windows 7 in terms of Coding and Compatibility.

I mite help you in this..
Here a list of items what micosoft windows does not install...
as said in this list
sony vagas video editer
GTA 4
PHOTOSHOP PRO
Some printers also i cant not install brother to it
Most your problem is windows 7 it self taken out microsoft C++ 2005 redistributable
this software you must have so your installer can install products you need
im not sure you can try one of the items from micosoft
64-BIT DOWNLOAD
or
32-BIT DOWNLOAD
I can NOT say this will work for you
anyway i found window 7 to be not good os i also infrom them this as well...

Software and drivers won't install on windows 8.1!!

I have a new computer running windows 8.1. After downloading the printer software for my all in one C4580, the files extract but then nothing happens. I've run the scan doctor and the install wizard and the same thing happens with those downloads. Hence, I have no way to install the software. In task manager the setup.exe is running and using alot of CPU's and so I ended the task. Went through the download and all the "fixes" and still with no luck. I've tried connecting my printer with the USB cable to see if that might help. It didn't. Please, I need help!

Hello ithacagoddess
Welcome to the HP Forums!
I understand the software will not run once it extracts. I will do my best to assist you! I am going to provide numerous suggestions that could assist you.
Please complete all of your Windows Updates. Doing this could install, or repair, what is necessary to resolve the issue. Use these steps when installing your updates:
1. Open "Windows Update" in Control Panel.
2. Click "Settings", and then click "Install optional updates".
3. Next, click "Check for updates".
Next, I will have you install the latest redistributable package. This is the latest version and should be installed. This is very crucial towards the success of the installation. Please download and install if from this link: Visual C++ Redistributable Packages for Visual Studio 2013
There have been certain .dat files that have been known to cause this issue. They are HPOIN*.DAT and HPWINS*.DAT. Deleting whatever of these files exist could resolve the issue. To do this, go to the Charms Bar, then search and %WINDIR% and hit Enter. Once the %WINDIR% window is open, look for any files that state with HPOIN or HPWINS and delete them.
If you have McAfee Live Safe installed, this program might be causing the issue. This software directly interferes with our printer software. Disabling the entire program should be done. The Spyware Realtime Scanner is the particular function that causes these issues.
In addition to disabling that program, you can perform a clean boot to disable everything else that might cause an issue. Here are some instructions on how to do this: Performing a Clean Boot in Windows
At this point, I would try reinstalling the printer software. Please use the Printer Install Wizard when installing the software: HP Printer Install Wizard for Windows
Please respond to this post after you try everything! I do have additional troubleshooting to suggest if this fails. Thanks for choosing the HP Forums. Have a great day!
Mario
I worked on behalf of HP.

Raid drivers won't install with 1.8bios

I ran into an issue with the new 1.8 bios for the K8N Neo 2. Attempted to reinstall XP and the install would hang when adding one of the raid files from the floppy to the windows installation folder.(made several attempts with different floppies) Switched back to 1.6 bios and no problems. Anyone else experience this issue?

Did you "upgrade" the diskette with driverfiles from "..\5.10\nForce_5.10_WinXP2K_WHQL_international\IDE\WinXP" ?

Boot Camp drivers won't install on Windows 7

I have a late 2011 MacBook Pro (10.10.2 Yosemite), and just installed Windows 7 (64-bit) via Boot Camp. It works fine but I am unable to install any of the drivers (version 5.1.5621). I put them on a flash drive but when I open Drivers/Apple/BootCamp, it says the program can not be run, check your bit version for compatibility (something like that)... I then try the troubleshoot way but this is what happens-
Thanks for the help.

Please verify that you have the correct drivers using System requirements to install Windows on your Mac via Boot Camp - Apple Support and install or repair using setup.exe in the BC folder.

Unable to install with Windows 7 and IE9 x64bit,

I got a new PC to day , and I want to download Itunes.
When I download it looks ok, but when the computer is trying to install I got this warning message:
"Can not open this installasionpakkage,Control that the package excists and the axcess to it, otherwise contact the programdistrubitor to verify that it is an valid windows product"
Does anyone have an Solution ?

Try this link, it is for the 64bit windows version of itunes.
http://support.apple.com/kb/DL1427

Mac Pro compatibility with Windows 7 and Bootcamp

This apple post : http://support.apple.com/kb/HT3920
says they will not support Win7 on older Mac Pro's (e.g. 2.66ghz dual). Does anyone know why?
When I try to instal Win7 on Bootcamp 3 I get a BSOD and it will not run.
Suggestions?

If you look closely you see that EFI64 (UEFI 2.x) is the demarcation line of 2008 between support or not is EFI firmware.
2006-7 and you get the EFI menu prompt with 64-bit Vista and 7. Mac Pro and others pre-2008. Apple's idea of supported or not may not be ours. If you want to troubleshoot yourself.
BC 3.0 - built during the summer, before Windows Oct 22nd, buggy, and rushed. Often due to the HFS read feature, just rename "AppleHFS.sys" to something else is often enough. Not sure why your system is having trouble without knowing more.

Apple Mobile Device Service (AMDS) won't install with iTunes,either V10.7 or V11. The service can't be started b/c the software is not there. Windows 7 with latest service pack. V11 iTunes installs

Apple Mobile Device Service (AMDS) won't install with iTunes,either V10.7 or V11. The service can't be started b/c the software is not there. Windows 7 with latest service pack. V11 iTunes installs fine, iPod found, no iPhone 5 b/c no AMDS. Error "insufficient premissions to install AMDS" Tried numerous uninstall / reinstall combinations, installed iTunes as administrator, etc. Somethings not right. What the Heck ?

See the following article for dealing with Apple Mobile Device Services: http://support.apple.com/kb/TS1567
Downloading and installing iTunes will not fix this problem. If the other troubleshooting steps do not work, go to the Control Panel and uninstall iTunes, Apple Mobile Device Services, Quicktime and any other Apple program that might be present. Reboot your computer, then download and install the latest version of iTunes.

The drivers won't install

The drivers won't install>Hi
I have a very old MP3 player which I recently started using again. It is around 5 or 6 years old and I think the model name is just Creative ZEN. The model number is DAP-HD005.
Following a hardware failure on my old PC a couple of months ago, I have recently got? a new PC, which runs on Windows 7 (64 bit). The old PC was about 5 years old and ran Windows XP. I have just tried to installm the software that came with the product on the installation disc but it won't load. I have also tried to find anything on theCreative site that will help, but nothing I have downloaded has so far solved the problem. I understand that the player is so old it is unlikely to be supported, but I wondered if there is some generic software that I have missed that I can install which will allow my PC to recognise the player.
Failing this, is gthere a way to make the player work with a Macbook? I tried to install the software on my wife's Macbook, but it wouldn't even try to run.
Any help greatly appreciated.
Thanks
Mark

You should be able to use compatabilty mode for XP to install this [url="http://support.creative.com/downloads/download.aspx?nDownloadId=00098">driver[/url]. It may freeze during the install & not progress but if it does & it lasts longer than 0mins exit it & reboot anyway. Then connect the player. Others have used this method & have been using their older players. I used this method on my Vista comp to install an older nomad player. Download the driver rightclick on the driver choose properties>compatabilty>Xp>then Ok. Then run the file & follow the instructions.

HP Officejet 6500A Plus won't work with Windows 10

Help!! Officejet 6500Aplus won't print with windows 10. Every aplication just spits out blank pages when you print.

I have the same issue with my OJ 6500 (network connected). And I've been just been sent on a wild goose chase to install the support assistant - which didn't actually resolve my issue. When I go directly to the drivers, it recognizes my OS as Windows 10, but doesn't give me a matching driver package to download... How/when will this be resolved? Does anyone have a workaround?If I knew that my printer/scanner doesn't work anymore I certainly wouldn't have upgraded to Windows 10. Win 8.1 wasn't perfect, but at least everything worked... Thanks for any suggestions!

HP OfficeJet J6410 won't install under Windows 8

Hello to you all,
Two days ago, I bought a new notebook for my daughter. She needs it for her study. It's the HP Pavilion TouchSmart 11-e000ed.
Again, just like the situation I wrote about before in this topic over here (link: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Officet-J6410-won-t-install-under-Wind... the OfficeJet Printer J6410 won't install under Windows 8.
Now this is what I've done before the problem occured:
- I made a username and password for her,
- I activated Windows 8,
- I made a recovery-point,
- I took my external DVD writer, installed Office 2007 Home and Student for her (o.k, I know it's old, but it's very o.k - and legal copy -. for her study, used it myself as well and still do, and never any complaints about that one), and activated it,
After that and restarting the notebook;
- the notebeek activated USB 2.0 (it does that automatically at first use),
- installed XPS2OneNote (to use for Office OneNote 2007),
- installed SaveAsPDF&XPS,
- removed Norton Internet Security (I never use it, I use something else for that purpose, but was - and still am - planning to install that on a later moment),
- I made sure the notebook can access the server we have here at home, and made a share for her.
After that I used the OJ_AIO_J6400_Full_Win_WW_140_408.exe file (Dutch, but I'll translate the text in English).
From this point on I will describe as precisely as possible what happened
- - the program extracts some files, no problems there,
- - when the first screen appears, I pressed 'Install',
- - a bar appears, and after that another pop-up that says tha you must allow all HP processes. I pressed 'Next',
- - system is controlled, and after that one must agree with the licence agreements. I checked the box, and pressed 'Next',
- - the system is prepared for installation and - yes! - there it comes... an error message.
The error message says:
C:\users\<username of my daughter.\AppData\Local\Temp\7zS0FF0\Setup\de..
Please not that this is a different message than the one I got before, as I described in my posting before, (link again: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Officet-J6410-won-t-install-under-Wind...
Nonehteless, I assumed that, as before, the problem was with the C+++, just like before. That is why I made the following steps:
- I used the OJ_AIO_J6400_140_408_Scrubber program, run L4 4 times.
- I looked for the KB2565063 update, but it isn't there anymore. So, instead, I ran all updates there are until the system said that there are no updates to be found,
- After that I took the old installation disk that came with the OfficeJet J6410 printer, and (tried to) ran hpsetup.exe. It doesn't do a thing! Literally!!
- after that I tried to run the the OJ_AIO_J6400_Full_Win_WW_140_408.exe file again. No success. I got the same error as before (see above, the ..\7zS0FF0\Setup\de.. thing again.
So, what to do now?
Anyone got some helpfull tips for me? I would really appreciate your feedback / help.
Thank you in advance,

Hi again,
No, it didn't work. And, the solution you offered neither.
This is what I've done.
After downloading the OJ_AIO_J6400_Full_Win_WW_140_408-4.exe file, I tried to install it.
It failed. I got an error message similar to the one before.
'C:\users\<username of my daughter.\AppData\Local\Temp\7zS57DB\Setup\de.'
I tried to ran the scrubber again, and the CCCUninstaller and tried again.
Same error message occured.
After that I tried to look for the KB2565063 file again. Found it this time and ran the vcredist_x64 file.
I rebooted the system, tried to run the OJ_AIO_J6400_Full_Win_WW_140_408-4.exe file again.
Same error message ocuured.
So, after that, I followed the steps you proposed.
Step 2 - searching for hpoins*.dat --> no results found.
Step 3 - searching for hpwins*.dat --> no results found.
Step 4 - I ran the Run Dialog box and typed MSIEXEC /REGSERVER (with AND without the extra space between ('MSIEXEC /REGSERVER') in the Dialog Box and pressed Ok.
Got an error message in Dutch:
'Kan het bestand MSIEXEC /REGSERVER niet vinden. Controleer of u de naam juist hebt ingevoerd en probeer het daarna opnieuw.
Translation: 'Can't find the file MSIEXEC /REGSERVER. Check if you typed the name correctly and try again'.
Step 5 - I ran the Run Dialog box and typed MSIEXEC /UNREGISTER (with AND without the extra space between ('MSIEXEC /UNREGISTER') in the Dialog Box and pressed Ok.
Got an error message in Dutch:
'Kan het bestand MSIEXEC /UNREGISTER niet vinden. Controleer of u de naam juist hebt ingevoerd en probeer het daarna opnieuw.
Translation: 'Can't find the file MSIEXEC /UNREGISTER. Check if you typed the name correctly and try again'.
So... conclusion: NOTHING worked.
My ideas for a possible solution didn't work, and neither did your ideas for a possible solution.
Reason why I want it to work is because of the HP Solution Center. If I can not install it with the software from the original installation disk, or the software that one can download from the HP site (the OJ_AIO_J6400_Full_Win_WW_140_408-4.exe file that is), than I have no HP Solution Center. That would be a pity, for I am sure my daughter would really love the use and ease of the program, and would really use it a lot for her study.
What's next? What else can I try to solve the problem?
Got any more idea's or helpful hints?
Thanks in advance,

Indesign CS6 won't install on Windows 7 64bit via GPO

Good afternoon,
I created a installation of Indesign CS6 with application manager enterprise 3 to deploy to computers via the active directory.
It installs correctly without issue to Windows XP x86 machines however won't install to Windows 7 x64 machines.
When the computers starts it trys to install but fails and proceeds to the login screen. The following information is left in the Windows event log.
Has anyone else had this problem and more importantly know how to solve it?
Log Name:      System
Source:        Microsoft-Windows-GroupPolicy
Date:          13/08/2013 9:44:23 AM
Event ID:      1085
Task Category: None
Level:         Warning
Keywords:
User:          SYSTEM
Computer:      WIN7TEST
Description:
Windows failed to apply the Software Installation settings. Software Installation settings might have its own log file. Please click on the "More information" link.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-GroupPolicy" Guid="{AEA1B4FA-97D1-45F2-A64C-4D69FFFD92C9}" />
    <EventID>1085</EventID>
    <Version>0</Version>
    <Level>3</Level>
    <Task>0</Task>
    <Opcode>1</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2013-08-12T23:44:23.375831000Z" />
    <EventRecordID>9482</EventRecordID>
    <Correlation ActivityID="{B74A3709-81F6-4B73-AA1F-9B610874B7EA}" />
    <Execution ProcessID="384" ThreadID="1324" />
    <Channel>System</Channel>
    <Computer>WIN7TEST</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data Name="SupportInfo1">1</Data>
    <Data Name="SupportInfo2">3961</Data>
    <Data Name="ProcessingMode">1</Data>
    <Data Name="ProcessingTimeInMilliseconds">41590</Data>
    <Data Name="ErrorCode">1603</Data>
    <Data Name="ErrorDescription">Fatal error during installation. </Data>
    <Data Name="DCName">\\AYR.burdekin.qld.gov.au</Data>
    <Data Name="ExtensionName">Software Installation</Data>
    <Data Name="ExtensionId">{c6dc5466-785a-11d2-84d0-00c04fb169f7}</Data>
</EventData>
</Event>
Log Name:      System
Source:        Application Management Group Policy
Date:          13/08/2013 9:44:23 AM
Event ID:      108
Task Category: None
Level:         Error
Keywords:      Classic
User:          SYSTEM
Computer:      WIN7TEST
Description:
Failed to apply changes to software installation settings. Software changes could not be applied. A previous log entry with details should exist. The error was : %%1603
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Management Group Policy" />
    <EventID Qualifiers="0">108</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2013-08-12T23:44:23.000000000Z" />
    <EventRecordID>9481</EventRecordID>
    <Channel>System</Channel>
    <Computer>WIN7TEST</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data>Software changes could not be applied. A previous log entry with details should exist.</Data>
    <Data>1603</Data>
</EventData>
</Event>
Log Name:      System
Source:        Application Management Group Policy
Date:          13/08/2013 9:44:23 AM
Event ID:      102
Task Category: None
Level:         Error
Keywords:      Classic
User:          SYSTEM
Computer:      WIN7TEST
Description:
The install of application Adobe InDesign CS6 from policy Global-Application-Adobe InDesign failed. The error was : %%1603
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Management Group Policy" />
    <EventID Qualifiers="0">102</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2013-08-12T23:44:23.000000000Z" />
    <EventRecordID>9479</EventRecordID>
    <Channel>System</Channel>
    <Computer>WIN7TEST</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data>Adobe InDesign CS6</Data>
    <Data>Global-Application-Adobe InDesign</Data>
    <Data>1603</Data>
</EventData>
</Event>

Hi Abhijit,
I am able to install InDesign CS6 manually on the machines from the CD/DVD however when trying to install it via GPO or running the msi using the msi exec commands it doesn't install and leaves the above errors in the event log.
The installation was made using the same CD/DVD and the installation works on the Windows XP clients and software other than InDesign CS6 will install to the Win 7 64-bit machines via GPO.
Cheers,

Multitouchpad drivers won't install with Windows XP and bootcamp

Similar Messages

Maybe you are looking for