Multitrack session not active?
Might be a dumb question but adobe not letting me open a file in the editor just pops up with an error saying "Multitrack session not active. Mixer controls are enabled only when a multitrack session is the active document"
Any ideas?
Using adobe Audition for Mac Beta.
Cheers
Ben...
If you check the dates on the original post, it's from about 3 years ago before the Audition for Mac was officially released, hence the desire to get all queries about that software in the one place.
Anyhow, that was then and this is now.
The only time I know you get that warning is when you attempt to use the Mixer view without having first set up a multitrack session--the mixer is inactive until you have a session to mix. The tabs to control Edit View vs Mixer view are at the top of that main window where you normally see waveforms or the mixer.
There are lots of ways to create a multitrack session...I guess the most basic is File--->New--->Multitrack Session. This will give you a dialogue window where you set up things like the title, the bit depth and sample rate, whether you want a stereo or mono master, that sort of thing. Alternately, just Edit--->Insert--->Into Multitrack Session which will give you a choice of existing sessions or the dialogue box to create a new one again.
Similar Messages
-
Is it possible to output multiple clips from a multitrack session, at the same time?
I'm using Audition CC 2014.2
on Windows 7 Pro x64
I am trying to figure out how to output several clips from a multitrack session, at the same time.
A session like this:
Is it possible to output 5 files right now?
I can select each one (or even multiple) and use File > Export > Multitrack Mixdown > Selected Clips to do one at a time only.
I'm hoping for a way to give each clip (or group of clips) a predefined filename, by perhaps using markers or something like that, which would then allow me to faster "automate" the exporting of each section into a different sound file.
This ability would be really helpful when using a single multitrack session to generate multiple sounds and a change to globally applied effects is made and all sounds now need to be updated.
Any ideas?They are, yes, but I'm also working with multitrack sessions using clips made from various different sound files.
Ahh ok, use markers?
So, this sort of thing isn't possible in multitrack mode then?
If not, it sounds I'll have to "mix down" my multitrack session into a single file and set up the markers in Waveform Edit view.
That's an extra step I'd have to do, and after editing the multitrack session, surely some markers . . . oh wait, no . . . every time I output the new mix down file from the multitrack I'd need to redo all the markers. Drat . . .
Honestly, I am very new to Audition, but I'm about to plow into it, big-time, and I'm hoping for a nice non-destructive and fast workflow that'll enable me to output sets of sounds from the same multitrack session.
But, it seems like this functionality is currently missing. -
Appcrash with multitrack sessions in Audition CS6 on a MacBook Pro with Windows 7
This is an issue with multitrack sessions different from 44100 Hz in Audition CS6 (as part of a Premium Suite CS6). While multitrack sessions with a sampling rate of 44100 Hz works normally (as long as I use clips with 44100 Hz) any other sampling rate causes an APPCRASH (s. below). Also with the insertion ( in a 44100 Hz multitrack session, of course) of any clip with a sampling rate different from 44100 Hz, the programme crashes in the moment it's going to generate a adapted copy for the multitrack timeline.
Audition is installed on a MacBook Pro Retina 15" ,Mid 2014, Model 11,3, Intel Core i7 4870HQ 2,5 GHz, 16GB RAM with Windows 7 SP1.
I tried all advices of the Adobe troubleshooting site and some of the community.
Especially:
- the simplified mode with user-defined system start
- deactivated user account control
- new user account
- deactivated data execution prevention (DEP)
Also the use of different audio interfaces affords no effect:
- build in Cirrus Logic CS4208 with MME drivers
- Motu UltraLight mk3 hybrid via USB with Asio drivers.
In spite of an extensive search I can't find any similar case in the net.
So, please, can you help me?
Sorry, it's a german version of windows 7:
Problem signature
Problemereignisname: APPCRASH
Anwendungsname: Adobe Audition CS6.exe
Anwendungsversion: 5.0.2.7
Anwendungszeitstempel: 505806ee
Fehlermodulname: StackHash_0a9e
Fehlermodulversion: 0.0.0.0
Fehlermodulzeitstempel: 00000000
Ausnahmecode: c0000005
Ausnahmeoffset: 45ef2b00
Betriebsystemversion: 6.1.7601.2.1.0.256.48
Gebietsschema-ID: 1031
Zusatzinformation 1: 0a9e
Zusatzinformation 2: 0a9e372d3b4ad19135b953a78882e789
Zusatzinformation 3: 0a9e
Zusatzinformation 4: 0a9e372d3b4ad19135b953a78882e789I'm afraid you are right. At the worst I'm more than 50% of the audition users on a mac with windows.To solve the problem within a passable time I would like to change to the mac version of audition. But unfortunately it's impossible to use the mac version with a windows licence. And CS6 licences (mac audition) are not longer available (only at a moon rate).
Because of the weekend we can pass the time with the latest news of my trouble-shooting.
The crash is not only within the multitrack session but also within the waveform view: when I try to change the sampling rate (Edit -> Convert Sample Type) the programme crashes with the same problem signature. And here it crashes with all sampling rates , including 44.1k audio files. On the other hand I can play all sampling rates within the waveform view.
I compared the logfile from the predecessor of the MacBook , a LG Notebook with windows vista and a working Au CS6 with the current logfile of the Mac: They are identical at the beginning and at the end (termination sequence). But after " Initializing AuScripting" there is a "DLMS 6.0x39 FileServer startup code: 0" and the listing of a couple of codecs in the Notebook logfile - but not so in the Mac logfile.
Also the logfile of my workstation with a working Au CS6 shows this "DLMS 6.0x39 FileServer startup code" - line. Because of the two working and one crashing computer this part of the logfile seems to be important ??
Logfile audition predecessor (Notebook) - detail
A blank line is only to arrange the logfile more clearly - it doesn't stand for missing lines.
Ticks = 60014 <4068> <AuLog.DisplaySurface> <5> Initialize PRM
Ticks = 60014 <4068> <AuLog.DisplaySurface> <5> Initialize DS
Ticks = 60076 <4068> <AuLog.DisplaySurface> <5> DS Initialize succeeded
Ticks = 60076 <4068> <AuLog.DisplaySurface> <5> Video Panel is using the Display Surface
Ticks = 64304 <4068> <AuLog.Startup> <5> Initializing AuScripting
Ticks = 86191 <3796> <AuLog.Plug-in> <5> DLMS 6.0x39 FileServer startup code: 0
Ticks = 86191 <3796> <AuLog.Plug-in> <5> AVI Movie (*.avi)
Ticks = 86191 <3796> <AuLog.Plug-in> <5> *.AVI
Ticks = 86191 <3796> <AuLog.Plug-in> <5> FLV (*.flv)
Ticks = 86191 <3796> <AuLog.Plug-in> <5> *.FLV
Logfile MacBook Pro - detail
Ticks = 3510 <3976> <AuLog.Startup> <5> AuUI initialization sequence complete.
Ticks = 3869 <3976> <AuLog.DisplaySurface> <5> Initialize PRM
Ticks = 3869 <3976> <AuLog.DisplaySurface> <5> Initialize DS
Ticks = 3900 <3976> <AuLog.DisplaySurface> <5> DS Initialize succeeded
Ticks = 3915 <3976> <AuLog.DisplaySurface> <5> Video Panel is using the Display Surface
Ticks = 4493 <3976> <AuLog.Startup> <5> Initializing AuScripting
Ticks = 22948 <3976> <AuLog.Plug-in> <5> Loading AMIO plug-in: AmioWav
Ticks = 22948 <3976> <AuLog.Plug-in> <5> Audition Wave Amio-Plug-In. ID: 60df8553-00c8-4fd7-8a07-6f25e30ab79c
Ticks = 45958 <3976> <AuLog.Shutdown> <5> AuUI termination sequence started... -
Hi Experts,
Please check this Developer Trace of Dispatcher, this is stopped, when I am restarting my server, it is giving errors :
running but not connected to message server,
and
running but dialog queue standstill, J2EE service unavilable.
trc file: "dev_disp", trc level: 1, release: "700"
sysno 01
sid XID
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 52
intno 20050900
make: multithreaded, Unicode, optimized
pid 1412
Fri Sep 21 10:19:59 2007
kernel runs with dp version 210000(ext=109000) (@(#) DPLIB-INT-VERSION-210000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 1412) [dpxxdisp.c 1231]
shared lib "dw_xml.dll" version 52 successfully loaded
shared lib "dw_xtc.dll" version 52 successfully loaded
shared lib "dw_stl.dll" version 52 successfully loaded
shared lib "dw_gui.dll" version 52 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Fri Sep 21 10:20:04 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5233]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >inggnh002sap_XID_01 <
DpShMCreate: sizeof(wp_adm) 12672 (1408)
DpShMCreate: sizeof(tm_adm) 3954072 (19672)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1452)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 06510040, size: 4607512)
DpShMCreate: allocated sys_adm at 06510040
DpShMCreate: allocated wp_adm at 06511E28
DpShMCreate: allocated tm_adm_list at 06514FA8
DpShMCreate: allocated tm_adm at 06514FD8
DpShMCreate: allocated wp_ca_adm at 068DA570
DpShMCreate: allocated appc_ca_adm at 068E0330
DpShMCreate: allocated comm_adm at 068E2270
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 06963130
DpShMCreate: allocated gw_adm at 06963170
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 069631A0
DpShMCreate: allocated wall_adm at 069631A8
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
MM diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 1324
argv[0] = D:\usr\sap\XID\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\XID\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\XID\SYS\profile\XID_DVEBMGS01_inggnh002sap
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=2009
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=XID
argv[7] = -DSAPMYNAME=inggnh002sap_XID_01
argv[8] = -DSAPPROFILE=D:\usr\sap\XID\SYS\profile\XID_DVEBMGS01_inggnh002sap
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1617]
Fri Sep 21 10:20:05 2007
***LOG Q0K=> DpMsAttach, mscon ( inggnh002sap) [dpxxdisp.c 11414]
DpStartStopMsg: send start message (myname is >inggnh002sap_XID_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Fri Sep 21 10:20:06 2007
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 52
Release check o.K.
Fri Sep 21 10:20:41 2007
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1492
(SI_ECONN_BROKEN; I4; ST; 127.0.0.1:2014) [nixxi.cpp 4235]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=1324)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Fri Sep 21 10:20:45 2007
ERROR => W0 (pid 2804) died [dpxxdisp.c 14021]
ERROR => W1 (pid 1484) died [dpxxdisp.c 14021]
ERROR => W2 (pid 2708) died [dpxxdisp.c 14021]
ERROR => W3 (pid 1464) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W4 (pid 860) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W5 (pid 2964) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W6 (pid 2508) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W7 (pid 3840) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W8 (pid 1072) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:20:55 2007
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Fri Sep 21 04:50:55 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 2804 Ended no 1 0 0
1 DIA 1484 Ended no 1 0 0
2 DIA 2708 Ended no 1 0 0
3 DIA 1464 Ended no 1 0 0
4 UPD 860 Ended no 1 0 0
5 ENQ 2964 Ended no 1 0 0
6 BTC 2508 Ended no 1 0 0
7 SPO 3840 Ended no 1 0 0
8 UP2 1072 Ended no 1 0 0
Dispatcher Queue Statistics Fri Sep 21 04:50:55 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 7 ( 87%), shm 1 ( 12%)
since last update total 8, udp 7 ( 87%), shm 1 ( 12%)
Dump of tm_adm structure: Fri Sep 21 04:50:55 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Fri Sep 21 04:50:55 2007
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:21:00 2007
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >inggnh002sap_XID_01 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (776) (SOFT_KILL)
Stop icman
killing process (2780) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:776 HANDLE:1572)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:21:01 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:776 HANDLE:1572)
wait for end of icman
[DpProcDied] Process lives (PID:2780 HANDLE:1576)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:21:02 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2780 HANDLE:1576)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:21:03 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2780 HANDLE:1576)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:21:04 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2780 HANDLE:1576)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:21:05 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2780 HANDLE:1576)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:21:06 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2780 HANDLE:1576)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:21:07 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2780 HANDLE:1576)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:21:08 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2780 HANDLE:1576)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:21:09 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2780 HANDLE:1576)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:21:10 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2780 HANDLE:1576)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:21:11 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2780 HANDLE:1576)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:21:12 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2780 HANDLE:1576)
[DpProcDied] Process died (PID:1324 HANDLE:1556)
DpStartStopMsg: send stop message (myname is >inggnh002sap_XID_01 <)
NiIMyHostName: hostname = 'inggnh002sap'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Fri Sep 21 10:21:13 2007
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11698]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 1516 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 1516 (pos=3)
SiSelNRemove: removed sock 1516
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/9
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 1516
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 1412) [dpxxdisp.c 10087]
Good Bye .....
Please Help, it is urgent,
Regards,
Study SAPHi Kaushal,
Thanks for your reply, there are many files with dev*.
Please check the log from file dev_w0 :
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Fri Sep 21 10:37:39 2007
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\XID\DVEBMGS01\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\XID\DVEBMGS01\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\XID\DVEBMGS01\exe\dboraslib.dll' is "700.08", patchlevel (0.46)
B New connection 0 created
M sysno 01
M sid XID
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 52
M intno 20050900
M make: multithreaded, Unicode, optimized
M pid 3588
M
M kernel runs with dp version 210000(ext=109000) (@(#) DPLIB-INT-VERSION-210000-UC)
M length of sys_adm_ext is 572 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3588) [dpxxdisp.c 1293]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M
M Fri Sep 21 10:37:40 2007
M DpShMCreate: sizeof(wp_adm) 12672 (1408)
M DpShMCreate: sizeof(tm_adm) 3954072 (19672)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1452)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 06510040, size: 4607512)
M DpShMCreate: allocated sys_adm at 06510040
M DpShMCreate: allocated wp_adm at 06511E28
M DpShMCreate: allocated tm_adm_list at 06514FA8
M DpShMCreate: allocated tm_adm at 06514FD8
M DpShMCreate: allocated wp_ca_adm at 068DA570
M DpShMCreate: allocated appc_ca_adm at 068E0330
M DpShMCreate: allocated comm_adm at 068E2270
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 06963130
M DpShMCreate: allocated gw_adm at 06963170
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 069631A0
M DpShMCreate: allocated wall_adm at 069631A8
X EmInit: MmSetImplementation( 2 ).
X MM diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host inggnh002sap
M
M Fri Sep 21 10:37:41 2007
M calling db_connect ...
C Prepending D:\usr\sap\XID\DVEBMGS01\exe to Path.
C
C Fri Sep 21 10:37:47 2007
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@XDI on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 06AAFCF8 06AB5294 06AB4B1C
C Attaching to DB Server XDI (con_hdl=0,svchp=06AB4A68,svrhp=06AC6334)
C
C Fri Sep 21 10:37:48 2007
C Starting user session (con_hdl=0,svchp=06AB4A68,srvhp=06AC6334,usrhp=06ADB0D8)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 4345]
C Detaching from DB Server (con_hdl=0,svchp=06AB4A68,srvhp=06AC6334)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c 10704]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@XDI on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 06AAFCF8 06AB5294 06AB4B1C
C Attaching to DB Server XDI (con_hdl=0,svchp=06AB4A68,svrhp=06AC6334)
C
C Fri Sep 21 10:37:49 2007
C Starting user session (con_hdl=0,svchp=06AB4A68,srvhp=06AC6334,usrhp=06ADB0D8)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 4345]
C Detaching from DB Server (con_hdl=0,svchp=06AB4A68,srvhp=06AC6334)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c 10704]
B ***LOG BV3=> severe db error 1033 ; work process is stopped [dbsh#2 @ 1199] [dbsh 1199 ]
B ***LOG BY2=> sql error 1033 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> ORA-01033: ORACLE initialization or shutdown in progress [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1403]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10019]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = V-1
M
M *****************************************************************************
M *
M * LOCATION SAP-Server inggnh002sap_XID_01 on host inggnh002sap (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Fri Sep 21 10:37:49 2007
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10204
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3588) [dpnttool.c 327]
Regards,
Study SAP -
How to cut part of multitrack session to new session in Abode Audition 3.0?
I record live performances in Adobe Audition 3.0's multitrack feature, which are about an hour long. When I highlight a section of a set of four tracks (containing one of the songs I want to save out), I cut it, and paste each track into a new session. However, it looks like all I'm doing is pasting the *whole* thing, with just a section showing.
Is there an easy way to create a session in Audition that contains *just* the portion I'm highlighting? Having to copy the entire hour long performance for each song is eating up a lot of storage space. There must be a way to "trim" the copy so that the raw files associated with it *only* contain the song I'm looking for...?
I suppose I could find out the beginning/ending times I need, highlight that portion in the first track in track view, trim it, and save it, repeat for all four tracks, and then load them all into a new session, but it seems like there must be an easier way?
Thanks in advance... Still getting the hang of multi-track recording in Audition!Sorry to necro this thread, but in case anyone is looking for these sorts of solutions again it may be useful to share my own method(s). I am often faced with this process, and will do the splitting process before I do anything else, this is important for me so I can keep the original files untouched. I am assuming you already have the base multi-track session open and tracks set up. This should work for most version of AA but instructions are based on CS6 (I have CEP, AA3 and CS6 on my machine).
Method A:
1. Select the time the excerpt you want covers.
2. Go to File>Export>Multitrack Mixdown (or right click on the selection and choose Export>Time selection)
3. Select the format you want your tracks to be in - you can leave this as is to use the same as source, or convert to 48k-24bit for DVD or 44k-24bit for CD at this point (the earlier the better). This will be the same as the new session you will create later. Make a new folder for the session audio somewhere and choose that as the destination.
4. Select the Mixdown options [Change] and check each track individually, you can uncheck the master track unless you also want a reference track.
5. Ok all this and wait for export to finish.
6. File>New multitrack session, then create a new session in the folder you created when exporting the audio.
7. Drag and drop the exported tracks to the new session.
8. Finished.
Method B:
1. Create a new session, keeping the original open, make sure the original is the active document.
2. Select the time the excerpt you want covers.
3. Press CTRL-A to select all clips
4. Edit>Copy, flick to new session, Edit>Paste.
5. This creates only the time selections cut out from the ORIGNAL clips, we need to make unique ones, so...
6. You now have, non-unique copies of the whole tracks (the session is referencing the original files), so you need to double click each wave and trim them and make them unique. Once in waveform view, right-click>select current view time then right-click>Copy to new.
7. repeat 6 for each clip, delete the existing clips and drag the new trimmed clips from the files panel tab to the session.
8. finished.
Method A is better for large sessions, but B can be quicker when you just have a couple of tracks and your originals aren't huge.
I'd love a Copy time selection to new session feature that also make new clips... -
Managed Standby Recovery not active
Dear All,
My database version is:
SQL> select banner from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for Linux: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
OS:RedHat 5.5
My current configuration is:
We have two node RAC primary database and a local standby database.
And TWO NODE RAC DR (REMOTE)STANDBY DATABASE
while checking (REMOTE WHICH IS TWO NODE RAC)dr synchronization we found archive since yesterday has not been applied.
But local dr is fully sinc with the primary database.
When i have executed 'ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL' it says
SQL> alter database recover managed standby database cancel;
alter database recover managed standby database cancel
ERROR at line 1:
ORA-16136: Managed Standby Recovery not active
I manually copied the archive log which where missing in the remote standby database and then register those archive log.
after that when i manually tried to recover the standby database it has given me following error.
sql>recover automatic standby database;
ORA-00283: recovery session canceled due to errors
ORA-01124: cannot recover data file 1 - file is in use or recovery
ORA-01110:data file 1: '/database/ctmis/system01.dbf'
please please help me to resolve the issue.
Thanks and Regards
Monoj Dasaccording to my understand
Node1,Node2 is having node1-standby node2-standby in RAC environment right?
on which node logs ur trying to apply on which node standby? (node1 ==>node1-standby or node2 ==>node2-standby)
check it...hope it will work or not sure :)
standby side...
rman target /
RMAN>crosscheck archivelog all
then try to recover..will see ..
if not
check with support.oracle.com through SR. -
ORA-16136: Managed Standby Recovery not active
Hi
I am trying implement the dataguard in the windows platform. And this is my first time. Right now iam trying on physical standby. i have done everything as per the document. But iam getting some error. After giving the
SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT FROM SESSION;
SQL> ALTER SYSTEM SWITCH LOGFILE;
SQL> recover managed standby database cancel;
// I am getting error
ORA-16136: Managed Standby Recovery not active
When just like that i tried to open the standby database in read only mode, i am getting error
SQL> alter database open read only;
alter database open read only
ERROR at line 1:
ORA-16004: backup database requires recovery
ORA-01157: cannot identify/lock data file 1 - see DBWR trace file
ORA-01110: data file 1: 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\DB1\SYSTEM01.DBF'
When i checked the alert log file of Primary Database, it shows:
PING[ARCo]: Heartbeat failed to connect to standby 'db2sby'. Error is 1031.
Wed Sep 01 14:10:27 2010
Thread 1 advanced to log sequence 337 (LGWR switch)
Current log# 2 seq# 337 mem# 0: C:\ORACLE\PRODUCT\10.2.0\ORADATA\DB1\REDO02.LOG
Wed Sep 01 14:10:28 2010
Deleted Oracle managed file C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\DB1\ARCHIVELOG\2010_02_25\O1_MF_1_224_5RD10Z5V_.ARC
Wed Sep 01 14:14:53 2010
Error 1031 received logging on to the standby
Wed Sep 01 14:14:53 2010
Errors in file c:\oracle\product\10.2.0\admin\db1\bdump\db1_arco_2156.trc:
ORA-01031: insufficient privileges
PING[ARCo]: Heartbeat failed to connect to standby 'db2sby'. Error is 1031.
Wed Sep 01 14:19:53 2010
Error 1031 received logging on to the standby
Wed Sep 01 14:19:53 2010
Errors in file c:\oracle\product\10.2.0\admin\db1\bdump\db1_arco_2156.trc:
ORA-01031: insufficient privileges
And when i checked alert log file of stand by database:
Wed Sep 01 14:13:19 2010
Errors in file c:\oracle\product\10.2.0\standbyy\admin\db2\bdump\db2sby_dbw0_3060.trc:
ORA-01157: cannot identify/lock data file 9 - see DBWR trace file
ORA-01110: data file 9: 'C:\TSUNDO12.DBF'
ORA-27086: unable to lock file - already in use
OSD-00001: additional error information
O/S-Error: (OS 101) The exclusive semaphore is owned by another process
--> The above error of Standby was coming for each datafile such as system, users etc.
Kindly Help me.
Shiyas Mhere is the pfile of Primary Database:
db1.__db_cache_size=188743680
db1.__java_pool_size=4194304
db1.__large_pool_size=4194304
db1.__shared_pool_size=83886080
db1.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0/admin/db1/adump'
*.background_dump_dest='C:\oracle\product\10.2.0/admin/db1/bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\db1\control01.ctl','C:\oracle\product\10.2.0\oradata\db1\control02.ctl','C:\oracle\product\10.2.0\oradata\db1\control03.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0/admin/db1/cdump'
*.db_16k_cache_size=4194304
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_name='db1'
*.DB_UNIQUE_NAME='db1prim'
*.LOG_ARCHIVE_CONFIG='DG_CONFIG=(db1,db2sby)'
*.LOG_ARCHIVE_DEST_1='LOCATION=C:\oracle\product\10.2.0\ARCHIVELOG VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=db1prim'
*.LOG_ARCHIVE_DEST_2='SERVICE=db2sby LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=db2sby'
*.LOG_ARCHIVE_DEST_STATE_1=ENABLE
*.LOG_ARCHIVE_DEST_STATE_2=ENABLE
*.LOG_ARCHIVE_FORMAT=%t_%s_%r.arc
*.LOG_ARCHIVE_MAX_PROCESSES=30
*.FAL_SERVER=db2sby
*.FAL_CLIENT=db1
*.DB_FILE_NAME_CONVERT='C:\oracle\product\10.2.0\Standbyy\oradata\DB2','C:\oracle\product\10.2.0\oradata\db1'
*.LOG_FILE_NAME_CONVERT='C:\oracle\product\10.2.0\Standbyy\oradata\DB2','C:\oracle\product\10.2.0\oradata\db1'
*.STANDBY_FILE_MANAGEMENT=AUTO
*.db_recovery_file_dest='C:\oracle\product\10.2.0/flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=db1XDB)'
*.job_queue_processes=10
*.open_cursors=300
*.pga_aggregate_target=95420416
*.processes=150
*.recyclebin='OFF'
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=287309824
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0/admin/db1/udump'
*.utl_file_dir='OCM_CONFIG_HOME/state'
Here is the Pfile of standby database:
db1.__db_cache_size=188743680
db1.__java_pool_size=4194304
db1.__large_pool_size=4194304
db1.__shared_pool_size=83886080
db1.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0\Standbyy\admin\db2\adump'
*.background_dump_dest='C:\oracle\product\10.2.0\Standbyy\admin\db2\bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\Standbyy\oradata\db2\control001.ctl','C:\oracle\product\10.2.0\Standbyy\oradata\db2\control002.ctl','C:\oracle\product\10.2.0\Standbyy\oradata\db2\control003.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0\Standbyy\admin\db2'
*.db_16k_cache_size=4194304
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_name='db1'
*.DB_UNIQUE_NAME='db2sby'
*.LOG_ARCHIVE_CONFIG='DG_CONFIG=(db1,db2sby)'
*.LOG_ARCHIVE_DEST_1='LOCATION=C:\oracle\product\10.2.0\ARCHIVELOG VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=db2sby'
*.LOG_ARCHIVE_DEST_2='SERVICE=db1 LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=db1'
*.LOG_ARCHIVE_DEST_STATE_1=ENABLE
*.LOG_ARCHIVE_DEST_STATE_2=ENABLE
*.LOG_ARCHIVE_FORMAT=%t_%s_%r.arc
*.LOG_ARCHIVE_MAX_PROCESSES=30
*.FAL_SERVER=db1
*.FAL_CLIENT=db2sby
*.DB_FILE_NAME_CONVERT='C:\oracle\product\10.2.0\Standbyy\oradata\DB2','C:\oracle\product\10.2.0\oradata\db1'
*.LOG_FILE_NAME_CONVERT='C:\oracle\product\10.2.0\Standbyy\oradata\DB2','C:\oracle\product\10.2.0\oradata\db1'
*.STANDBY_FILE_MANAGEMENT=AUTO
*.db_recovery_file_dest='C:\oracle\product\10.2.0\flash_recovery_area\DB2SBY'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=db1XDB)'
*.job_queue_processes=10
*.open_cursors=300
*.pga_aggregate_target=95420416
*.processes=150
*.recyclebin='OFF'
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=287309824
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0\Standbyy\admin\db2\udump'
*.utl_file_dir='OCM_CONFIG_HOME/state' -
Patch NW04s SPS09 Container Web Dynpro is not active
Hello SDN,
I am trying to patch my NW04s SPS08 Portal to SPS09.
I get the following error message. I am not able to start the web dynpro container.
Has anyone of you an idea whats going on?
Thanks.
Best Regards,
Olaf Reiss
Sep 14, 2006 3:39:20 PM Info: SDA to be deployed: D:\usr\sap\S05\JC51\SDM\root\origin\sap.com\tc\kmc\kmc.people.shared\wd_picker\SAP AG\1\7.0009.20060804134857.0000\sap.comtckmckmc.people.sharedwd_picker.ear
Sep 14, 2006 3:39:20 PM Info: Software type of SDA: J2EE
Sep 14, 2006 3:39:21 PM Info: ***** Begin of SAP J2EE Engine Deployment (J2EE Application) *****
Sep 14, 2006 3:39:29 PM Info: Begin of log messages of the target system:
06/09/14 15:39:23 - ***********************************************************
06/09/14 15:39:26 - Start updating EAR file...
06/09/14 15:39:26 - start-up mode is lazy
06/09/14 15:39:27 - EAR file updated successfully for 751ms.
06/09/14 15:39:27 - Start updating...
06/09/14 15:39:28 - EAR file uploaded to server for 391ms.
06/09/14 15:39:29 - ERROR: Not updated. Deploy Service returned ERROR:
java.rmi.RemoteException: Cannot deploy application sap.com/tckmckmc.people.shared~wd_picker..
Reason: Container webdynpro is not active at the moment and it is not possible to update sap.com/tckmckmc.people.shared~wd_picker.; nested exception is:
com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Container webdynpro is not active at the moment and it is not possible to update sap.com/tckmckmc.people.shared~wd_picker.
at com.sap.engine.services.deploy.server.DeployServiceImpl.update(DeployServiceImpl.java:682)
at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1278)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320)
at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198)
at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Container webdynpro is not active at the moment and it is not possible to update sap.com/tckmckmc.people.shared~wd_picker.
at com.sap.engine.services.deploy.server.application.UpdateTransaction.getConcernedContainers(UpdateTransaction.java:483)
at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.commonBegin(DeployUtilTransaction.java:263)
at com.sap.engine.services.deploy.server.application.UpdateTransaction.begin(UpdateTransaction.java:164)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:292)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:326)
at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:3184)
at com.sap.engine.services.deploy.server.DeployServiceImpl.update(DeployServiceImpl.java:670)
... 10 more
For detailed information see the log file of the Deploy Service.
06/09/14 15:39:29 - ***********************************************************
Sep 14, 2006 3:39:29 PM Info: End of log messages of the target system.
Sep 14, 2006 3:39:29 PM Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
Sep 14, 2006 3:39:29 PM Error: Aborted: development component 'tc/kmc/kmc.people.shared/wd_picker'/'sap.com'/'SAP AG'/'7.0009.20060804134857.0000'/'1', grouped by :
Caught exception during application deployment from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Cannot deploy application sap.com/tckmckmc.people.shared~wd_picker..
Reason: Container webdynpro is not active at the moment and it is not possible to update sap.com/tckmckmc.people.shared~wd_picker.; nested exception is:
com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Container webdynpro is not active at the moment and it is not possible to update sap.com/tckmckmc.people.shared~wd_picker.
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Sep 14, 2006 3:39:29 PM Info: Starting to save the repository
Sep 14, 2006 3:39:32 PM Info: Finished saving the repository
Sep 14, 2006 3:39:32 PM Info: Starting: Update: Selected software component 'KMC-CM'/'sap.com'/'SAP AG'/'1000.7.00.9.0.20060806101400''/'1' updates currently deployed software component 'KMC-CM'/'sap.com'/'SAP AG'/'1000.7.00.8.0.20060601154400''/'0'.
Sep 14, 2006 3:39:32 PM Error: Aborted: software component 'KMC-CM'/'sap.com'/'SAP AG'/'1000.7.00.9.0.20060806101400''/'1':
Failed deployment of SDAs:
development component 'tc/kmc/kmc.people.shared/wd_picker'/'sap.com'/'SAP AG'/'7.0009.20060804134857.0000'/'1' : aborted
Please, look at error logs above for more information!
Sep 14, 2006 3:39:32 PM Info: Starting to save the repository
Sep 14, 2006 3:39:34 PM Info: Finished saving the repository
Sep 14, 2006 3:39:34 PM Info: J2EE Engine is in same state (online/offline) as it has been before this deployment process.
Sep 14, 2006 3:39:34 PM Error: -
At least one of the Deployments failed -Hello Prakash
I have same problem as above
I'm patching to SPS10 and problem with "BI-WDALV" occurs.
Dec 13, 2006 11:23:31... Info: End of log messages of the target system.
Dec 13, 2006 11:23:31... Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
Dec 13, 2006 11:23:31... Error: Aborted: development component 'bi/alv/common'/'sap.com'/'MAIN_APL70VAL_C'/'963367'/'0',
grouped by software component 'BI-WDALV'/'sap.com'/'MAIN_APL70VAL_C'/'1000.7.00.10.0.20061025062313''/'0':
Caught exception during application deployment from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Cannot deploy application sap.com/bialvcommon..
Reason: Container webdynpro is not active at the moment and it is not possible to update sap.com/bialvcommon.; nested
exception is:
com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Container webdynpro is not active at the mo
ment and it is not possible to update sap.com/bialvcommon.
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionT
ypes).REMEXC)
Dec 13, 2006 11:23:31... Info: Starting to save the repository
Dec 13, 2006 11:23:34... Info: Finished saving the repository
Dec 13, 2006 11:23:34... Info: Starting: Update: Selected software component 'BI-WDALV'/'sap.com'/'MAIN_APL70VAL_C'/'100
0.7.00.10.0.20061025062313''/'0' updates currently deployed software component 'BI-WDALV'/'sap.com'/'MAIN_APL70VAL_C'/'1
000.7.00.9.0.20060811133149''/'0'.
Dec 13, 2006 11:23:34... Error: Aborted: software component 'BI-WDALV'/'sap.com'/'MAIN_APL70VAL_C'/'1000.7.00.10.0.20061
025062313''/'0':
Failed deployment of SDAs:
development component 'bi/alv/common'/'sap.com'/'MAIN_APL70VAL_C'/'963367'/'0' : aborted
Please, look at error logs above for more information!
Dec 13, 2006 11:23:34... Info: Starting to save the repository
Dec 13, 2006 11:23:36... Info: Finished saving the repository
Dec 13, 2006 11:23:36... Info: J2EE Engine is in same state (online/offline) as it has been before this deployment proce
ss.
Dec 13, 2006 11:23:36... Error: -
At least one of the Deployments failed -
how can I manually deploy that file?
thanks alot
Best regards,
Olzhas Suleimnoev -
Hi all,
I am seeing active session in v$session, but unable to kill it.
select sid,status,serial# from v$session where sid=123;
123,ACTIVE,32746
ALTER SYSTEM KILL SESSION '123,32746';
ERROR
SESSION NOT FOUND.
select sid,status,serial# from v$session where sid=123;
123,ACTIVE,32746
Please suggest. why i am not able to kill session, even if it's showing me active.
Thanks In Advance.I'm not completely sure, but after killing session it remains in v$session for some time (I don't know how long). If you logged to that user account you will get the error information (that the session) and it will disappear from v$session.
Cheers,
Aliq -
Hello All,
A program is calling SM35 using call transaction method in Error mode and the batch input session is filtered based on the session name.
But when i try to process the session in foreground, an error message "Session still active" is stopping from further process. But I am able to process this session in background.
Please help me in solving this issue.
Regards,
Phani.Hi!
If a session contains numerous entries, it could take a lot of time until it is finished.
We can say processing 1 batch input entry takes 1 second. If there are 100000 entries, then it will take 100000 seconds to process.
Because it is already running, you can't continue it online, running it again in background will do nothing, however it will not give an error message.. But you can check how many processed entries there are using the BI log.
You can delete unwanted and corrupted BI sessions, using program RSBDCDEL.
Regards
Tamá -
Multitrack session import/export
So I've been using audition since it was CoolEdit back in the 90s, and nowadays I work in film. I was excited about the release of CS5 and downloaded a trial as soon as possible, but I'm quite disappointed. why? It's still impossible to move multitrack sessions around.
Quick recap of multitrack audio capabilities in Adobe products...
Audition loads/saves .ses and XML files, with the latter recommended for future compatibility. It doesn't import other XML files.
Soundbooth only saves stereo files, but can load/export the ASND format (new in CS3/4?) to embed multitrack info (which can then be reopened and edited in SB).
Premiere exports OMF and its successor AAF (popular multitrack project exchange formats) and imports the ASND format. It imports and export final Cut XML files, but not Audition XML files.
Premiere also lets you select any clip and open it for editing in Soundbooth or Audition. That's clip, singular. Select two audio clips and the option is greyed out.
Neither Bridge nor Dynamic link allow multitrack audio sharing.
Do you see the problem here? If you have a pile of multitrack audio clips in Premiere (like you would after editing a film) there is no way to get your audio timeline information, with many tracks and many clips, from Premiere into Audition or its little brother, Soundbooth
This is, frankly, a disaster.
Think about it: audition has by far the best forensic, analysis and editing tools of any DAW. But anyone using Premiere who needs to do fine-grained audio editing - because although Premiere is audio-friendly, it has its limits - is forced to export to something like OMF or AAF and then bring into Pro Tools (spit). You can create audio in Premiere and export it as audio tracks (with blank space) to Soundbooth, from where you can throw it back and forth between SB and Premiere to your heart's content.
But if you're editing a film (not a music video) then there is no way you would want to put the audio together in Audition or Soundbooth first, because 90% of the time it will be following the picture. You can get individual clips out of Premiere and into the others...but only one at a time, which defeats the entire purpose of post sound editing, where you are trying to blend together multiple clips from different takes. And even though Premiere offers multiple options for exporting all the clip information and even volume/pan and plugin data to standard platform independent multitrack formats, Adobe's audio tools can't read any of those files.
When is Adobe going to fix this? I'm sorry to say that I'm becoming embarrassed to tell people I prefer Audition, because everyone in the business knows it's hopeless for multitrack portability.
And I'm not saying this to be selfish - this problem is really, really hurting Adobe's sales of both Audition and Premiere. Avid owns Digidesign, maker of Pro Tools. I hate both, but from a logistic standpoint they're a great combination, it's pretty easy to get stuff out of Avid into PT, and of course both of them have 'tradition' on their side. Apple has Final Cut, and Soundtrack Pro (rather like Soundbooth) or Logic, for those who want more. I don't care for this platform either, but it's a viable solution. And here's Adobe, with a decent lightweight audio editor in Soundbooth and the best analytical/forensic audio tool - which is exactly what's needed for film post - in Audition.
And yet there is no way to get your audio timeline out of Premiere and into either of these tools, nor do either of them load any industry-standard multitrack file formats, nor are they even compatible with each other. I was looking at an Adobe TV episode earlier today where they take a music project from Audition to Soundbooth...by exporting the tracks as individual audio files, which are then added to a brand new Soundbooth project. This is just ridiculous. I mean, if I'm consulting for someone about audio post for a film project or to outfit a studio, how can I possibly recommend Adobe's products? Individually they're great, but in workflow terms, forget it. Anyone who needs to get things done will probably go for Pro Tools, and since Avid and FCP are both more widely used than Premiere they'll probably go for one of those too.
I really can't understand why the audio tools aren't integrated to the same degree as, say, After Effects. Premiere + AE is a winning combo, and yet audio is arguably even more important than color correction or VFX, as almost every film has a soundtrack and audiences are far more intolerant of poor sound than they are of visual shortcomings. Please, please fix this. I live in San Francisco, so I'm not far from Adobe's offices: I will happily donate a day or two of my time, and even supply a waiver of any claim in intellectual property, to answer any and all questions about audio workflow. I think I've learned a few things worth sharing over the course of 10 features and about 50 shorts. It's not a big deal for Adobe to fix.
Message was edited by: Anig Browl to add the following: there is a LOT of stuff I do like about CS5 - Premiere has not gained a ton of new features, but it has had a massive performance overhaul, and the new features that do exist are very useful. The same is true of several other packages - I wouldn't want this to be seen as a 'nothing's ever any good' rant. The sad thing is that it won't reach its full audience because of the inexplicable barrier that remains in place between the NLE and the multitrack audio environment.I'm glad of these reports, and have been checking out AAT, which has potential. I do have some reservations about it, but this is not the place to critique helpful solutions; I'll limit myself to saying I'm a bit troubled by the obvious dependence on an old UI library and the conversion speeds, which seem slow for a task that is basically text-based (ie metadata manipulation). Look out for a follow up email, Michael, and thanks for your previous reply.
All the same, at bottom this is an Adobe problem - third party conversion utilities shouldn't be needed to move projects between Adobe's own software. It's a shortcoming of the CS4 & 5 suites, in that file-conversion approaches like that of AAT are necessarily destructive and thus preclude dynamic file exchange. I mean, would you buy a new car if the salesman said the fenders fall off above walking speed, but that you could fix the problem with $100 of duct tape?
Suppose, for example, one is polishing audio for a film, but audience tests or the director's opinion mandates a scene be cut, or (worse) lengthened. Making a change in the NLE would require export from Audition to a Premiere-compatible format (probably via AAT to AAF or FCP-XML, but see below), import to Premiere, consistency and compatibility checks, adjustment of the edit timeline as required, and subsequent re-export for conversion by AAT, import to Audition, followed by further compatibility and consistency checking - plus a separate render and media export of the video, since Audition can only handle a single video track.
While both hardware and sanity dictate that it's probably best to manage the project as a batch of single scenes or reels rather than moving an entire feature or TV episode at once, this process is likely to take at least an hour before audio editing can resume. In theory it should only require a few minutes for export, conversion, import, adjustment, re-export, conversion and re-import, but that process offers 6 stages for things to go wrong. Even if everything is usually fine, time-consuming sanity checks are still required, unless you like all-night emergency rescue sessions. In practice, a single small timeline change in the NLE may well be easier to accommodate by manually moving the audio in Audtion, and cross-checking the timecode in both applications.
When I started doing audio for film - back when it was film, and the audio was recorded on DAT or even analog tape - this was the norm and those skills still work. But it undermines the whole point of using metadata and products like Adobe Bridge for version management. This is not the fault of AAT in any way; it's just a fact that when your workflow involves export/import via third-party tools, you have to treat every such iteration as a separate project file and adhere to strict versioning and administration/backup practices even though these would be better performed by the computer. In a perfect world, we'd stick to a scheme whereby the editor locks the movie once and forever, the audio engineer and colorist work their magic on the soundtrack and the picture respectively, and then their efforts are united for the final master. But we don't live in such a world, and clients don't appreciate being told that changes which were easy and swift at an early stage are now either impossible or hugely time-consuming.
This is what I mean when I refer to being embarrassed to say Audition is my favorite editing tool. Most people want Pro Tools, because although it's expensive it's standard and the workflow is predictable. So that's what I end up using on a great many jobs; it's capable for most tasks, I'm good at it, and to be frank I can get paid a bit more for my ability to use it. The sad thing is that I can work better and faster in Audition, where things like the spectral editing, noise fingerprinting, and advanced filtering offer really amazing possibilities...but getting projects in and out of it are a terrible struggle. Soundbooth makes things marginally easier, but only marginally. I can see a possibility of rebuilding an audio timeline from Premiere using Adobe's Javascript Extensions, and then generating an audition-compatible XML file from there...but I can't say it looks like fun
As for exporting to AAF, Premiere CS5 has other problems. Many things can not be exported, like per-clip gain levels (because the Advanced Authoring Format doesn't properly support them, according to Premiere, although the protocol specification appears like it should). In any case, Premiere CS5 has trouble importing AAF; after exporting a short scene using all possible settings (normal, legacy, or normal with audio embedded), attempting to reload the exported file into a blank project causes an instant crash due to a kernel error (the import filter appears to launch a 32-bit process).
In any case, although AAF is still being developed it seems to be moving towards a BWF-style XML format, and most of AMWA's development seems concentrated in that direction. Final Cut XML appears to be the best solution, but this is (obviously) rather sad, and furthermore Premiere does not strip invalid data (eg >6.02dB gain, which Premiere clamps at +6 on import) from FCP-originated projects, but re-exports it - not an altogether bad thing for working with FCP partners, but not exactly optimal either. -
Container MigrationContainer is not active at the moment
Hi All,
Below mentioned error encountered while deploying SAP-CRMDIC component using the file SAPCRMDIC17_0-10002941.SCA. It ended up in "ERROR" status in JSPM.
Problem might be due to the "inactive container". Could you please let me know a easiest method to deploy the SAP-CRMDIC component.
predecessor system -
com.sap.engine.services.deploy.exceptions.ServerDeploymentE
xception: Container MigrationContainer is not active at the moment and it is not
possible to update sap.com/crmmigrxcm.
at com.sap.engine.services.deploy.server.application.Upd
ateTransaction.getConcernedContainers(UpdateTransaction.java:485)
at com.sap.engine.services.deploy.server.application.Dep
loyUtilTransaction.commonBegin(DeployUtilTransaction.java:265)
at com.sap.engine.services.deploy.server.application.Upd
ateTransaction.begin(UpdateTransaction.java:166)
at com.sap.engine.services.deploy.server.application.App
licationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:292)
at com.sap.engine.services.deploy.server.application.App
licationTransaction.makeAllPhases(ApplicationTransaction.java:326)
at com.sap.engine.services.deploy.server.DeployServiceIm
pl.makeGlobalTransaction(DeployServiceImpl.java:3190)
at com.sap.engine.services.deploy.server.DeployServiceIm
pl.update(DeployServiceImpl.java:671)
at com.sap.engine.services.deploy.server.DeployServiceIm
plp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1278)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInter
nal(DispatchImpl.java:330)
at com.sap.engine.services.rmi_p4.DispatchImpl._run(Disp
atchImpl.java:201)
at com.sap.engine.services.rmi_p4.server.P4SessionProces
sor.request(P4SessionProcessor.java:137)
at com.sap.engine.core.service630.context.cluster.sessio
n.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.ja
va:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunn
er.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(Act
ionObject.java:37)
at java.security.AccessController.doPrivileged(AccessCon
troller.java:207)
at com.sap.engine.core.thread.impl3.SingleThread.execute
(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(Sin
gleThread.java:176)
For detailed information see the log file of the Deploy Ser
vice.
11/02/12 19:54:04 - ***********************************************************
Feb 12, 2011 7:54:04 PM Info: End of log messages of the target system.
Feb 12, 2011 7:54:04 PM Info: ***** End of SAP J2EE Engine Deployment (J2EE App
lication) *****
Feb 12, 2011 7:54:04 PM Error: Aborted: development component 'crm/migr/xcm'/'s
ap.com'/'MAIN_CRM50VAL_C'/'7630861'/'2', grouped by :
Caught exception during application deployment from SAP J2EE Engine's deploy ser
vice:
java.rmi.RemoteException: Cannot deploy application sap.com/crmmigrxcm..
Reason: Container MigrationContainer is not active at the moment and it is not p
ossible to update sap.com/crmmigrxcm.; nested exception is:
com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Con
tainer MigrationContainer is not active at the moment and it is not possible to
update sap.com/crmmigrxcm.
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDepl
oyerImpl.performAction(DeploymentActionTypes).REMEXC)
Feb 12, 2011 7:54:04 PM Info: Starting to save the repository
Feb 12, 2011 7:54:05 PM Info: Finished saving the repository
Feb 12, 2011 7:54:05 PM Info: Starting: Update: Selected software component 'SA
P-CRMDIC'/'sap.com'/'MAIN_CRM50VAL_C'/'1000.5.0.17.0.20100820072113''/'2' update
s currently deployed software component 'SAP-CRMDIC'/'sap.com'/'MAIN_CRM50VAL_C'
/'1000.5.0.14.0.20090211084319''/'1'.
Feb 12, 2011 7:54:05 PM Error: Aborted: software component 'SAP-CRMDIC'/'sap.co
m'/'MAIN_CRM50VAL_C'/'1000.5.0.17.0.20100820072113''/'2':
Failed deployment of SDAs:
development component 'crm/migr/xcm'/'sap.com'/'MAIN_CRM50VAL_C'/'7630861'/'2' :
aborted
Please, look at error logs above for more information!
Feb 12, 2011 7:54:05 PM Info: Starting to save the repository
Feb 12, 2011 7:54:05 PM Info: Finished saving the repository
Feb 12, 2011 7:54:05 PM Info: J2EE Engine is in same state (online/offline) as
it has been before this deployment process.
Feb 12, 2011 7:54:05 Error: -
At least one of the Deployments
failed -
Thanks.Hi,
You would need to start the services MigrationService and MigrationContainer using following commands.
- connect via telnet to the system: telnet <hostname> 5<instance number>04
- authenticate with administrator username/password
- jump <server_id> Server ID can be obtained from the Visual Administrator/or from System Information Page.
- startservice MigrationService
- startservice MigrationContainer
Then retry the deployment.
Regards,
Srikishan -
Random OMF's Exist but not Active...
After a full database incomplete recovery 2 days ago, we have 3 Oracle-Managed Files hanging out in a directory that didn't exist before. Our structure looks like this:
/opt/oradata/ITNETDB/ctl01
/opt/oradata/ITNETDB/ctl02
/opt/oradata/ITNETDB/ctl03
/opt/oradata/ITNETDB/system
/opt/oradata/ITNETDB/archive
/opt/oradata/ITNETDB/temp
/opt/oradata/ITNETDB/data01
/opt/oradata/ITNETDB/data02
/opt/oradata/ITNETDB/data03
/opt/oradata/ITNETDB/data04
/opt/oradata/ITNETDB/data05
/opt/oradata/ITNETDB/data06
/opt/oradata/ITNETDB/data07
/opt/oradata/ITNETDB/data08
/opt/oradata/ITNETDB/data09
However, these OMF's exist here:
/opt/oradata/ITNETDB/data03/ITNETDB/datafile
and are titled:
o1_mf_gaming_p_4gqn22m8_.dbf
o1_mf_gaming_p_4gqn24fc_.dbf
o1_mf_maintena_556mn5my_.dbf
... and are actively being touched every few minutes. However, they do not exist in dba_data_files or in v$datafile.
I'm wondering what we can do with these so they're not "active" as they appear now. We would like to get rid of them.
We do not use OMF's in our environment.
I believe these may have been created in an attempt to move MISSING... files during our first attempt at a recovery but all files should have been discarded when the full restore and recovery was completed.
Thanks ahead of time.Thanks - the lsof command was helpful. 2 of the 3 datafiles are active as shown below. The related processes have also been grepped. It looks like the "...gaming..." datafiles are online... but as I mentioned before, they're not in v$datafile or dba_data_files, yet they're still being touched. How can we safely remove them?
$ /usr/sbin/lsof /opt/oradata/ITNETDB/data03/ITNETDB/datafile/o1_mf_gaming_p_4gqn22m8_.dbf
COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME
oracle 980 oracle 189uW REG 251,145 524296192 10371077 /opt/oradata/ITNETDB/data03/ITNETDB/datafile/o1_mf_gaming_p_4gqn22m8_.dbf
oracle 982 oracle 192u REG 251,145 524296192 10371077 /opt/oradata/ITNETDB/data03/ITNETDB/datafile/o1_mf_gaming_p_4gqn22m8_.dbf
oracle 984 oracle 151u REG 251,145 524296192 10371077 /opt/oradata/ITNETDB/data03/ITNETDB/datafile/o1_mf_gaming_p_4gqn22m8_.dbf
oracle 986 oracle 186u REG 251,145 524296192 10371077 /opt/oradata/ITNETDB/data03/ITNETDB/datafile/o1_mf_gaming_p_4gqn22m8_.dbf
oracle 992 oracle 182u REG 251,145 524296192 10371077 /opt/oradata/ITNETDB/data03/ITNETDB/datafile/o1_mf_gaming_p_4gqn22m8_.dbf
oracle 1276 oracle 186u REG 251,145 524296192 10371077 /opt/oradata/ITNETDB/data03/ITNETDB/datafile/o1_mf_gaming_p_4gqn22m8_.dbf
oracle 5822 oracle 9u REG 251,145 524296192 10371077 /opt/oradata/ITNETDB/data03/ITNETDB/datafile/o1_mf_gaming_p_4gqn22m8_.dbf
oracle 10088 oracle 185u REG 251,145 524296192 10371077 /opt/oradata/ITNETDB/data03/ITNETDB/datafile/o1_mf_gaming_p_4gqn22m8_.dbf
oracle 27702 oracle 9u REG 251,145 524296192 10371077 /opt/oradata/ITNETDB/data03/ITNETDB/datafile/o1_mf_gaming_p_4gqn22m8_.dbf
$ /usr/sbin/lsof /opt/oradata/ITNETDB/data03/ITNETDB/datafile/o1_mf_gaming_p_4gqn24fc_.dbf
COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME
oracle 980 oracle 190uW REG 251,145 104865792 10371075 /opt/oradata/ITNETDB/data03/ITNETDB/datafile/o1_mf_gaming_p_4gqn24fc_.dbf
oracle 982 oracle 193u REG 251,145 104865792 10371075 /opt/oradata/ITNETDB/data03/ITNETDB/datafile/o1_mf_gaming_p_4gqn24fc_.dbf
oracle 984 oracle 152u REG 251,145 104865792 10371075 /opt/oradata/ITNETDB/data03/ITNETDB/datafile/o1_mf_gaming_p_4gqn24fc_.dbf
oracle 986 oracle 187u REG 251,145 104865792 10371075 /opt/oradata/ITNETDB/data03/ITNETDB/datafile/o1_mf_gaming_p_4gqn24fc_.dbf
oracle 992 oracle 183u REG 251,145 104865792 10371075 /opt/oradata/ITNETDB/data03/ITNETDB/datafile/o1_mf_gaming_p_4gqn24fc_.dbf
oracle 1276 oracle 187u REG 251,145 104865792 10371075 /opt/oradata/ITNETDB/data03/ITNETDB/datafile/o1_mf_gaming_p_4gqn24fc_.dbf
oracle 10088 oracle 186u REG 251,145 104865792 10371075 /opt/oradata/ITNETDB/data03/ITNETDB/datafile/o1_mf_gaming_p_4gqn24fc_.dbf
$ /usr/sbin/lsof /opt/oradata/ITNETDB/data03/ITNETDB/datafile/o1_mf_maintena_556mn5my_.dbf
$ ps -ef | grep 980
oracle 980 1 0 Jul08 ? 00:16:23 ora_dbw0_ITNETDB
$ ps -ef | grep 982
oracle 982 1 0 Jul08 ? 00:33:27 ora_lgwr_ITNETDB
$ ps -ef | grep 984
oracle 984 1 0 Jul08 ? 00:00:50 ora_ckpt_ITNETDB
$ ps -ef | grep 986
root 10986 1 0 Jul01 ? 00:00:00 dbus-daemon-1 fork print-pid 8 print-address 6 session
oracle 986 1 0 Jul08 ? 00:00:47 ora_smon_ITNETDB
oracle 9864 1 0 Jul08 ? 00:01:21 oracleITNETDB (LOCAL=NO)
oracle 9866 1 0 Jul08 ? 00:01:34 oracleITNETDB (LOCAL=NO)
oracle 9868 1 0 Jul08 ? 00:32:13 oracleITNETDB (LOCAL=NO)
$ ps -ef | grep 992
oracle 992 1 0 Jul08 ? 00:00:09 ora_mmon_ITNETDB
oracle 8992 1 0 11:08 ? 00:00:00 oracleITNETDB (LOCAL=NO)
$ ps -ef | grep 1276
oracle 1276 1 0 Jul09 ? 00:00:32 oracleITNETDB (LOCAL=NO)
$ ps -ef | grep 5822
oracle 5822 1 0 Jul09 ? 00:00:01 oracleITNETDB (LOCAL=NO)
$ ps -ef | grep 10088
oracle 10088 1 0 Jul09 ? 00:01:15 oracleITNETDB (LOCAL=NO)
$ ps -ef | grep 27702
oracle 27702 1 0 Jul09 ? 00:00:00 oracleITNETDB (LOCAL=NO)
Edited by: Bob Sislow on Jul 10, 2009 10:41 AM -
ORA-12721: operation cannot execute when other sessions are active
Hi,
I started my DB like following :
1) Change INIT.ORA file; unset parallel_server parameter.
2) Execute these commands:
STARTUP MOUNT ;
ALTER SYSTEM ENABLE RESTRICTED SESSION;
ALTER SYSTEM SET JOB_QUEUE_PROCESSES=0;
ALTER SYSTEM SET AQ_TM_PROCESSES=0;
ALTER DATABASE OPEN;
SHUTDOWN IMMEDIATE;
SQL> STARTUP RESTRICT pfile='C:\oracle\product\10.2.0\db_1\database\initORCL.ora';
ORACLE instance started.
SQL> alter database national character set INTERNAL_CONVERT UTF8;
alter database national character set INTERNAL_CONVERT UTF8
ERROR at line 1:
ORA-12721: operation cannot execute when other sessions are activeWhy this error when DB is opened in strict and I'm the only user ?
SQL> select count (*) from v$session;
COUNT(*)
20Any solution ?
Thank you.Hi
This operation is dangerous, please ensure that you have a full backup before doing that operation.
Please use that order :
SHUTDOWN IMMEDIATE;
-- make sure there is a database backup you can rely on, or create one
STARTUP MOUNT;
ALTER SYSTEM ENABLE RESTRICTED SESSION;
ALTER SYSTEM SET JOB_QUEUE_PROCESSES=0;
ALTER SYSTEM SET AQ_TM_PROCESSES=0;
ALTER DATABASE OPEN;
ALTER DATABASE CHARACTER SET <new_character_set>;
-- a alter database takes typically only a few minutes or less,
-- it depends on the number of columns in the database, not the
-- amount of data.
SHUTDOWN;
Please note that :
The command requires the database to be
open but only one session, the one executing the command, is allowed.
For the above error conditions Oracle9i will report one of the errors:
ORA-12719: operation requires database is in RESTRICTED mode
ORA-12720: operation requires database is in EXCLUSIVE mode
ORA-12721: operation cannot execute when other sessions are active
Oracle9i can also report:
ORA-12718: operation requires connection as SYS
if you are not connect as SYS (INTERNAL, "/ AS SYSDBA").
Let us know if this helps.
regards,
Hub
Edited by: Hub on Dec 10, 2008 1:22 PM -
Creating a cd with multiple tracks from a multitrack session
I am trying to burn an audio cd with multiple tracks created from a multitrack session. Adobe 3.0 used to make this an easy process. I am only able to burn a cd with a single track regardless of range markers, cd track markers, etc.
Any help would be greatly appreciated.Hi and thank you for your reply. I am used to the functionality of audition 3.0. I place tracks from my hard drive into a session (usually 18 or so). I used to add markers, then file>export>multitrack mixdown>entire session. The resulting mixdown used to keep the markers. I am not familiar with how to save each track separately and I place the markers in the file during the session creation but before export>mixdown, etc.
Thanks
Maybe you are looking for
-
IPhone 4 will not accept incoming voice calls
I have one Exchange push account running. When no 3G coverage I do not receive phone calls unless I turn off Cellular Data. Caller receive message saying "Not possible to connect call" O2 have tested and agree not working, SIM swapped. Apple Covent G
-
Is there something that is like the Gallery with MobileMe on iCloud? I like to post pics for family etc and Gallery was perfect for that.
-
180: TV tunner sound problem
I got the AverTV Tv card (I got it because it was one of the only cards without FM radio) instead of the MSI one, I couldn't find the MSI one anywhere it was hard enough figuring out which card was the one for the mega-pc. The problem with the one I
-
How to convert julian Date into Calendar Date
Hi, I want convert julian Date to calendar Date (mm/dd/yyyy or mm/dd/yy format) in java. Can any one help me how to convert julian date to calendar Date. Thanks, Krishore.
-
Create line extension between two SPA-3102
I`m having problems to create a line extension between two SPA-3102 I have one SPA-3102 connected to an analog PBX system with IP 192.168.0.201, and the other SPA-3102 with analog phone and IP 192.168.0.200 I succesfully setup them to make a call fro