Multivalue checkbox in single field of datascheme of XML form

Hello everyone,
is there a way to provide the user a chance to select multiple values via checkboxes in an XML-form and write the values in a single field of the datascheme?
Currently only the first of the selected values ends up in the proper field, although several checkboxex are attached/connected.
Any ideas?
THX-Henning

I found another alternative solution.
Regarding to how to display the multivalue properties with the multi-valu check box in "Details":
1) Go to CM -> Global Services -> Property Metadata -> Properties
2) Go to the property that you want to display multivalue, for my case- "NewsType", set the "Property Renderer" parameter to "allowedvale_multivalued" (for sure you have to define the allowed values)
3) Go and check in "Details", it should show the multi-value property in check box group. Then you can "tick" and "untick" to change the values.
Kent

Similar Messages

Dataschema in XML form builder

Hi all i started doing one application on xml form builder .i created a project . when i click on name space i is showing an defeult value but when i right click on the dataschem it was not showing any values.i hane to add some structure to the data scheme .so, can any one solve my problem

Hi, Kris@EP.
Recommended JRE on client side for XML Forms Builder is 1.4.* or 1.5.*
Be sure that you got JRE version is lower than 1.6
If you have JRE 1.6.* implement [SAP Note 1341069|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_ep_km/~form/handler%7B5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d31333431303639%7D]
Regards, Mikhail.

Why does hitting the Single Field checkbox in QT remove lines from my video?

Hi, when reviewing my HD video's I see annoying lines. However I went into the video track and hit the Single Field checkbox and they went away. The deinterlace checkbox did absolutely nothing however. Does this simply mean the footage is progressive but quicktime was just reading it wrong initially?
Very intereseted in knowing the answer.
All the best
Kevin

Ok, maybe you can help me. I was sold some software that was meant to output progressive files in the AVI container with the MJPEG codec. I told him the software seems to be outputting interlaced files and this was his reasoning. Is he correct or is he taking me for a ride? This is a little beyond my knowledge of video systems so if anyone and help me please do.
They are Progressive Segmented Frames (PsF). This means they are progressive frames but with their information spread across two fields of an interlaced frame. Remember, interlacing is something added to the output of video to facilitate display requirements; it doesn't exist inside your PC. Odd, yes, but this is handy because if you had a true native progressive feed and tried to watch it on a display monitor that only supported interlaced input, you would not get an image. Also, PsF streams allow you to effectively use an interlaced camera to create progressive frames because, again, in a PC or MAC, there is no such thing as interlacing and during capture of each film frame, nothing moves between fields. Everything ends up progressive though carried on interlaced fields.
Forget film for a moment: Even when you shoot live video with an interlaced camera, the two successive fields for each frame are ALWAYS handled as one progressive frame inside your NLE, which usually displays only one of the fields during editing while the other field just goes along for the ride unseen. When you output the file or watch it on an external video monitor, the frames are then again broken up into fields to facilitate ease of playback on a variety of displays. If you were to deinterlace that video footage on your NLE, it would drop one field and use the remaining field to artificially create the missing field information to create one progressive frame. However, the output file would then be a PsF file because, even though the frames are now progressive, they are still being carried by an interlaced medium.
Likewise, when you use your progressive camera to create a live image, believe it or not, the video output is a PsF stream. That means the progressive frames are carried in two successive fields. The PC or Mac doesn't care that the information for each progressive frame arrives in two parts because, as mentioned earlier, the two parts are handled as one frame inside the NLE during editing.

Passing multiple values for a single field in URL to call sap Transaction

Hi All,
I need to pass multiple values for a single field to SAP transaction .
means if i have say a field "Date" which can contain more than one value, but its not a range which has two fields . How is it possible.
Let me know pls.
Regards,
Sirisha.R.S.

Hi Satyajit,
I need to call a transaction with multiple values which gives me the report based on those values.
So I need to pass multiple values for a single parameter.
I hope u got it.
Regards,
Sirisha.R.S.

F4 help for a single field in interactive form

Hi Experts,
I am working in HRAS process.I created a Form Scenario and an Adobe Form. I linked my interactive form in portal using standard Start Processes iView . Now I have to create a value help(F4 help) for 'STATE' field based on 'COUNTRY' field value in adobe form. I filled the Input value Help in the corresponding Form Scenario field. But in portal the adobe form shows the field as a single field only.
How I can I attach the manual F4 help to 'COUNTRY' field?
The how to vary the F4 help values in 'STATE' fied based on 'COUNTRY' field?
Do I need to code in Java script for this?
Please provide some inputs with code sample
Thanks in advance,

Lek,
Check Nikhil's reply in this [thread|Re: Reg: value help from BADI is not displayed in the HCm form;. It should probably help you.
Chintan

Deleting a single field from existing Layout - Update

Hi,
We need to amend our custom integrator's layout by removing a field from the layout.
However, in Desktop Integration - "Define Layout" - we do not have any option to delete a field (options are - Move Up/down, Read only, width,Frozen pane)
(Making width - 0 is not solving the purpose since only the field is not visible in layout but mappings remain as is)
Is there any option to remove a single field from integrator layout?
Thanks much in advance,
Rgds,
Sumanth

Duplicate post - Deleting a single field from existing Layout - Update
Srini

Deleting a single field from existing WebADI Layout (Update)

Hi,
We need to amend our custom WebADI integrator's layout by removing a field from the layout.
However, in Desktop Integration - "Define Layout" - we do not have any option to delete a field (options are - Move Up/down, Read only, width,Frozen pane)
(Making width - 0 is not solving the purpose since only the field is not visible in layout but mappings remain as is)
Is there any option to remove a single field from integrator layout?
Thanks much in advance,
Rgds,
Sumanth

Duplicate post - Deleting a single field from existing Layout - Update
Srini

Display values of a single field in a multiple rows in a table region

Hi Tech-Gurus,
I want to display values of a single field ( which is in a table region) in multiple rows and also need to restrict the values from decimal number. If i click save, then it will throw exception "Decimal not allowed".
xxxxxx
yyyyyy
Reg.No
1234
5678
7654
I need to display the values of REG.NO in different rows like,
1234
5678
7654
and also need to validate as well against Decimal values.
Please help me with the code how i will iterate ?

Hi,
I am assuming you are talking about displaying substrings from the Reg No in different rows. For this you would need to write a query which identifies the substrings and creates a separate row for each (ensure you choose values for all other columns in the table row). Kindly let me know if the understanding is incorrect.
To validate against decimal value you can use the java code by checking the difference of the number and the number on which modulus has been applied. Hope that helps.
Regards
Sumit

How to update a single field in Word macro

Hello,
I am trying to create an AutoOpen() macro that will update the file name and path when user opens in a Word document, but I can't seem to find anything explaining how to update a single field, specifically the {FILENAME \p} field. There
are other fields in the document, so I do not want to update all the fields. Most of the links I found only explain how to update ALL fields. Can somebody please tell me how I can update only the filename and path field using an autoopen macro?
Thank you

Stefan's response is correct.
Here is a macro that should update only filename fields.
Sub FileNameFieldUpdateAllStory()
' Written by Charles Kyle Kenyon 15 November 2001 - modified for filename 10 Sept 2014
' repaired by Jezebel
' All Story Field Updater - Filename fields
Dim oField As Field
Dim oStory As Range
' On Error Resume Next
For Each oStory In ActiveDocument.StoryRanges
' This goes into headers and footers as well as the regular document
Do
For Each oField In oStory.Fields
If oField.Type = wdFieldFileName Then
oField.Update
End If
Next oField
Set oStory = oStory.NextStoryRange
Loop Until oStory Is Nothing
Next oStory
End Sub
See Installing Macros for help in using this.
Charles Kenyon Madison, WI

How to change the screen element of a single field in a table control

Hi Gurus,
I want to change the screen element of a single field (or the whole row) in a table control according to a condition.
I have 2 columns in the table control. One is an input column and one output only. When user enters values into the input column, they need to be compared against the values in the other column, and if there is a discrepancy, the row where the discrepancy is needs to be highlighted.
I have tried the following code which highlights the whole column ...
CONTROLS: TC_ZVOYG_BINS TYPE TABLEVIEW USING SCREEN 0500.
DATA: wa_tc_zvoyg_col LIKE LINE OF TC_ZVOYG_BINS-cols.
LOOP AT G_TC_ZVOYG_BINS_ITAB
           INTO G_TC_ZVOYG_BINS_WA.
    if G_TC_ZVOYG_BINS_WA-zdelivery_bin ne G_TC_ZVOYG_BINS_WA-zactual_bin.
      loop at screen.
        IF screen-name = 'ZVOYG_BINS-ZACTUAL_BIN'.
          wa_tc_zvoyg_col-screen-intensified = 1.
          MODIFY tc_zvoyg_bins-cols FROM wa_tc_zvoyg_col TRANSPORTING
          screen-intensified WHERE screen-name = screen-name.
        endif.
      endloop.
    endif.
endloop.
And also the following code which makes no change ...
LOOP AT G_TC_ZVOYG_BINS_ITAB
           INTO G_TC_ZVOYG_BINS_WA.
    if G_TC_ZVOYG_BINS_WA-zdelivery_bin ne G_TC_ZVOYG_BINS_WA-zactual_bin.
      loop at screen.
        IF screen-name = 'ZVOYG_BINS-ZACTUAL_BIN'.
          screen-intensified = '1'.
          modify screen.
        endif.
      endloop.
    endif.
endloop.
Thanks in advance.

Hi,
The modification of a screen element attribute (LOOP AT SCREEN...MODIFY SCREEN) must always be done in the PBO (for a dynpro, it will be in a PBO module, i.e. declared by MODULE ... OUTPUT)
About the loop at the internal table, it is done automatically by the system, also during the PBO, you'll find something like LOOP [AT itab] ... WITH CONTROL ... in the PBO part of the screen flow logic (note: you may have to complete with a supplementary READ TABLE if you don't use AT itab). So you don't need an additional loop.
Best regards
Sandra

How to prevent the logging of a single field in XI ?

Hi Guys,
we have developed the interfaces for payment card services using the Enterprise services and the major problem what we are facing is to prevent the logging of the 3 digit security code in XI.
According to the payment card industry standards you should not store it as well as you should not encrypt this 3 digit CVV code.
Is there any way we can prevent the logging of this single field in XI ?
Is it possible if we develop our own custom adapters then we can acheive this ? Do we have full control over the DB in the custom adapters?
any help or suggestions or other alternatives would be really appreciated. I want to hear some solution from the experts.
Thanks in advance,
Srini

Hi Beena,
You can encrypt the credit card no and SSN and that should not be a problem, but you should not store or encrypt the CVV no.
as i said we have our own tools many customers are using with respect to RFCs where you can encrypt and decrypt the card numbers and also not storing the values of CVV.
The above scenario works fine with no issues and it is according to the PCI standards. If you use PI 7.1 and use adaptive controlling the values are stored at a single place ie you can acheive single persistance and even this will not be our solution.
Advanced Adapter Engine Configuration in PI 7.1
with the single persistsnce, if there is a adapter module or custom adapter which takes the payload and prevents the stroage of the value of a single field then it would be our solution.
Thanks,
Srini
Edited by: Srinivas Reddy on Aug 20, 2008 7:42 PM
Edited by: Srinivas Reddy on Aug 20, 2008 7:57 PM

Changing the color of a single field in a row of a table

Is it possible to change the color of text of a single field within a single column. If field 'C' in a row is negative number change the text color to red. Is this possible?

Hi Champion,
Please Do search before posting.. you get lots of threads here...
Re: color for a particular column in table
Re: Color a table row
Please go through this..
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/707fb792-c181-2d10-61bd-ce15d58b5cf1?QuickLink=index&overridelayout=true

Displaying data from a list into a single field with comma separated values

Hi,
I have a requirement to change a report with an XML structure (simplified version) as below
<Protocol>
<ProtocolNumber>100</ProtocolNumber>
<SiteName>Baxter Building</SiteName>
<ListOfActivity>
<Activity>
<Description>Communication Memo Description.</Description>
<Name>James</Name>
</Activity>
<Activity>
<Description>Visit 4</Description>
<Name>James</Name>
</Activity>
<ListOfActivity/>
</Protocol>
On the report I need to display all the 'Names' for each of the Child (Activities) in a single field at the Parent (Protocol) level, with each Name separated by a comma.
How do I go about getting this to work?
Thanks

Take a look at this: http://blogs.oracle.com/xmlpublisher/entry/inline_grouping
You could do this (ofcourse, you will need to add extra logic to ensure that there is no comma added after the last name..)
<?for-each@inlines:Name?><?.?><?', '?><?end for-each?>
Thanks,
Bipuser

How to delete data from single field in a database table?

Hi guys,
Plz suggest me How to delete data from single field in a database table?
thnks,
pavan

hi
in addition to abv details..chk this:
http://help.sap.com/saphelp_nw2004s/helpdata/en/fc/eb3aef358411d1829f0000e829fbfe/content.htm
http://dev.mysql.com/doc/maxdb/en/34/ee7fbd293911d3a97d00a0c9449261/content.htm
regards,
madhu

Single and double quotes entered in form field cause corruption?

I am creating a database change request system using in APEX 2.2 and the main form has a description field (clob) and a API_description field (varchar2(4000)) that are text area fields on the page. The form seems to have trouble when the string data entered into the text area page items on the form contain single and double quotes.
 
I have pasted my test data below in this problem description(this is not true sql but it gets the point accross). I use the wizard created insert process to get the data into the db from the text fields in the wizard generated form, then use the wizard created fetch process to get the data back out and rendered on the same form. When I use the test data below, sometimes a few characters dissappear from my input data on the way out, sometime form fields go away, and their html is interspersed with the previous form field's data on the page. And I get different results on different tests with the same data.
 
Do I have to do something special for a vanilla htmldb text page item on a form to be able to receive single and double quotes in the string input in order to avoid that string data confusing the processing on the way in to the Database or on the way out for rendering?
 
Do I have to escape the characters? How do I do this?
 
The "varchar2(1) := ‘A’" part of the below TEST DATA string seem to cause the most trouble. The behavior is erratic - sometimes the pattern works, sometimes html is interspersed in one place, sometimes another (on the way back out)
 
START TEST DATA:
Add column pcl3_data_ind varchar2(1) to edc_tran,edc_log, edc_recreate_tran table
Or
Create a file with following sql in it
Insert into sometable values(‘A’,sysdate);
Or
create new table as follows
create table “someschema”.“sometable”
(id number not null,
Name varchar2(20) not null,
Join_date sysdate
Active varchar2(1) := ‘A’
END TEST DATA:
 
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Here is an example of the test data being displayed after being fetched back out of oracle (this will look like gibberish when rendered in the forum system (end of problem description except for example):
 
env
Add column pcl3_data_ind varchar2(1) to edc_tran,edc_log, edc_recreate_tran table
Or
Create a file with following sql in it
Insert into sometable values(‘A’,sysdate);
Or
crete new tableas follws
crate table “somesca”.“sometable”
har2(20) not null,
Join_date sysdate
Active varchar2(1) := ‘A’
woextarea>
<a class="eLink" title="Edit" href="javascript:popupURL('f?p=4000:371:204538675714370::::P371_ID,FB_FLOW_ID,FB_FLOW_PAGE_ID:1034609472735510,104,2');" tabindex="999"><img src="/i/e.gif" alt="Edit" class="eLink" /></a></td></tr><tr><td nowrap align="right"><label ...

I found a good php related post that has a nice set of the potentially problematic characters (this is in the context of word pasted into IE I think). I am pretty confident that at least single curly quotes do not work well in apex 2.2). I would not be surprised if some of the others were trouble as well.:
http://lists.evolt.org/archive/Week-of-Mon-20030602/141975.html
here is the list
$trans_tbl[chr(34)] = '"' ; // quote
 $trans_tbl[chr(38)] = '&' ; // ampersand
 $trans_tbl[chr(60)] = '<' ; // less-than
 $trans_tbl[chr(62)] = '>' ; // more-than
 $trans_tbl[chr(128)] = '€' ; // euro
 $trans_tbl[chr(129)] = '€' ; // euro
 $trans_tbl[chr(130)] = '‚' ; // low quote
 $trans_tbl[chr(131)] = 'ƒ' ; // florin
 $trans_tbl[chr(132)] = '„' ; // double low quote
 $trans_tbl[chr(133)] = '…' ; // ellipsis
 $trans_tbl[chr(134)] = '†' ; // dagger
 $trans_tbl[chr(135)] = '‡' ; // double dagger
 $trans_tbl[chr(136)] = 'ˆ' ; // circumflex
 $trans_tbl[chr(137)] = '‰' ; // per thousand
 $trans_tbl[chr(138)] = 'Š' ; // S caron
 $trans_tbl[chr(139)] = '‹' ; // left angle quote
 $trans_tbl[chr(140)] = 'Œ' ; // OE ligature
 $trans_tbl[chr(142)] = 'Ž' ; // Z caron
 $trans_tbl[chr(145)] = '‘' ; // left single quote
 $trans_tbl[chr(146)] = '’' ; // right single quote
 $trans_tbl[chr(147)] = '“' ; // left double quote
 $trans_tbl[chr(148)] = '”' ; // right double quote
 $trans_tbl[chr(149)] = '•' ; // bullet
 $trans_tbl[chr(150)] = '–' ; // en dash
 $trans_tbl[chr(151)] = '—' ; // em dash
 $trans_tbl[chr(152)] = '˜' ; // small tilde
 $trans_tbl[chr(153)] = '™' ; // trademark
 $trans_tbl[chr(154)] = 'š' ; // small s caron
 $trans_tbl[chr(155)] = '›' ; // right angle quote
 $trans_tbl[chr(156)] = 'œ' ; // oe ligature
 $trans_tbl[chr(158)] = 'ž' ; // small z caron
 $trans_tbl[chr(159)] = 'Ÿ' ; // Y with diaeresis
 
-Geoffrey

Multivalue checkbox in single field of datascheme of XML form

Similar Messages

Maybe you are looking for