Multuple instances at the same node, jk-connector

- GlassFish Server Open Source Edition 3.1
- Server Version: Apache/2.2.22 (Unix) mod_ssl/2.2.22 OpenSSL/1.0.0-fips mod_jk/1.2.32
- JK Version: mod_jk/1.2.32 ()
I have succesfully created two instances in a cluster, one of which is installed at node (DAS installed)
other one is installed in remote node.
In this configuration there is only one jk-conenctor port is defined then enabled by creating network-listener (means it is created for two instances automactically) to activate the loadbalancing feature.
I want to add a new instance into a node (DAS installed), how I can configure the jk-connector port for that instances without effecting the loadbalancing processes.
jk-connector port defined for cluster1 is 28009.
Is is possible to add jk-connector per instance?
Edited by: mmc18 on 19-Feb-2012 23:36

Similar Messages

Multiple application instance on the same server instance

Can we have multiple instances of the same application on a single WLS?? For ex, can I have two app.ear files in different application directories??

Hi Nilesh,
Can you please clarify your landscape as this will help in getting answers to your question.
In general adding instances (and/or server nodes) should be considered for increasing capacity rather than impoving performance. Specifcially, adding instances (and/or server nodes on the same host you risk a situation where the processes compete for resources which will have a negative effect on performance. If you do need to combine instances on the same host, make sure there is enough hardware (specifically memory in case of JAVA).
Hope this helps,
Best regards, Walter

Opening multiple instances of the same vi

Hi,
I am having trouble opening multiple instances of the same vi.
This vi that I am trying to create can be used like a message display window to display numbers, strings etc (just like labVIEW's display message control except that this vi will update the displayed controls every scan). So for example, I will like to have a subvi, lets call it popup.vi, where I wire in three inputs from my main vi (2 strings and 1 number). Now in my main.vi I have 2 numeric controls Num1 and Num2 with their KeyFocus property nodes.
The intention is that when I select Num1 or Num2 numeric control with my mouse the KeyFocus boolean becomes true and the popup.vi logic kicks in. Meaning that the popup.vi runs and opens its front pane
l displaying the two strings and one numeric value from the main.vi.
The problem arises when I want to open and run multiple instances of the popup.vi.
So when I click on Num1 with my mouse I want the popup.vi to open its front panel with a set of strings and number displayed. At the same time I would want to click on Num2 control and open another instance of the popup.vi with another set of strings and numeric value.
Also, I saved the popup.vi as popup.vit but for some reason vi server will not open the popup.vit. I get a message that popup.vit is already in memory - cannot load.
I have attached a sample of the main.vi and popup.vi program.
Please let me know if you need further clarifications.
I appreciate your help in this matter.
Thanks
Nish
Attachments:
popupVI.zip ‏37 KB

You have to clone the VI. You say you have tried to use the .vit way of cloning...but in the example there is no use of VIT and the VI is called statically. If you want to open multiple instances of the same VI and the VI has a user interface (or needs to be a unique instance of the VI every time even though it's called the same place in the diagram, not the case here though) you need to do it dynamically, i.e. with an invoke node.
There is actually a problem doing just that, it causes a memory leak...but that won't be a problem unless the VI is called frequently / the software will be running over very long periods of time. You can see an example of it here (attached to my reply to the question):
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&
RPAGEID=135&HOID=506500000008000000A07D0000&UCATEGORY_0=_49_%24_6_&UCATEGORY_S=0&USEARCHCONTEXT_QUESTION_0=VI+cloning&USEARCHCONTEXT_QUESTION_S=0
About the memory leak problem:
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=506500000008000000B7A40000&UCATEGORY_0=_49_%24_6_&UCATEGORY_S=0&USEARCHCONTEXT_QUESTION_0=VI+cloning&USEARCHCONTEXT_QUESTION_S=0
MTO

IHAT multiple iAS instances in the same view.

I have three iAS instances installed on the same node, the iHAT is also installed and running from the same node.
iHAT Version: 10.1.3
APPSERVERS:
- INFRA - ORACLE_HOME01
- MIDTIER#1 - Forms / Report - ORACLE_HOME02
- MIDTIER#2 - Discoverer - ORACLE_HOME03
I installed iHAT and started the JAVA server, (3 sessions on different ports. 8096, 8097 and 8098)
Everything works well and i can monitor the application servers on the different ports from the web browser.
Then over to my question, is it possible to monitor all three IAS servers from only one running iHAT view? And if so, how is this possible.
Best regards,
Roberth Steiner

Yes.. I need to use different port and I could resolve by following steps
There is a way in Oracle Application Server to achieve this. However, it requires a different installation type and additional configuration, Following are the steps that you need to take.
a) Install Oracle Application Server with J2EE Server only option, this is in Advanced Installation, also, please select the option: Configure this as an Administration OC4J Instance.
b) Access Oracle Application Server control console
c) Create the OC4J instances, by default, it has a home instance, then you need create additional instances: say example placeagra, placeexcalibur.
d) Stop Oracle Application Server.
e) Edit [oracle-appserver-root]/opmn/conf/opmn.xml
Replace OC4J instance placeagra's port definition for default-web-site
from <port id="default-web-site" range="12501-12600" protocol="ajp"/> to <port id="default-web-site" range="8889" protocol="http"/>
Replace OC4J instance placeexcalibur's port definition for default-web-site
from <port id="default-web-site" range="12501-12600" protocol="ajp"/> to <port id="default-web-site" range="8890" protocol="http"/>
f) Start Oracle Application Server
g) Install your applications into these instances through application control console. (You can only use home's ascontrol)
* This should work fine. If you go to [oracle-appserver-root]/opmn/bin directory, type "opmnctl status -l", you will see that you have multiple HTTP server services running, each with different port.
* This is identical to Weblogic's set up, however, this is not recommended for production, since the embedded HTTP server in Oracle Application J2EE server is only for application management, just as weblogic.
* You can only access application console through home's http server, since ascontrol application for other instances are always in down mode.

How can I open multiple instances of the same version of FF?

I understand that if I have multiple profiles, I can run different versions of FF side-by-side (like 3.6 and 4).
However, what I'm interested in is how I can launch multiple instances of the same version of FF (4, for instance) using the same profile. In other words, I want to be able to double-click the desktop icon for FF, and open a new instance, and keep doing that as many times as I want. I don't want to have a different icon and profile for each instance (too much overhead to keep a dozen+ profiles in sync).
I can always launch one FF window instance, and then keep clicking ctrl+N to launch new instances from inside it, which they all share the same profile (as I want). So, basically, I want to be able to do that from my desktop icon, rather than by having to do it with the keyboard ctrl+N sequence.

But I don't understand why whatever Firefox does when you click ctrl+N can't also be done (with some sort of command-line switch) from a desktop icon?
In other words, I clearly can create many FF instances (even if they are the same FF.exe process) by doing ctrl+n a bunch of times. Why then can't this behavior be done from a desktop icon with some parameters?
As far as I know, FF is the only browser that doesn't directly allow multiple browser instances from desktop icons. IE, Chrome, Safari, Opera, etc... all let me launch a new instance (even if they are all single process and the instances are shared within the process).

Can I create a lot of instance with the same name?

I have, for a project in my studies, to create a map for an adventure game. I must create monsters on this map. For this I use a class that I called Creature. In my class Map i have to initialise the monsters but I
choose their quantity with Math.random() so I don't know how much the map will contain. If in a loop I do: Creature monster = new Creature(); will I have different instances with the same name(I doubt)? Will I have one monster re-created in each iteration of the loop? How can I do to have different monsters in different places (my map is a matrix 2x2)?

You would have many Creature references made, but only one variable to hold them, and it would go out of scope outside your loop. You could create a Creature array or use a List (both defined outside your loop) - as
// array
int numCreatures = randomGeneratedCreatureQuantity();
Creature[] monsters = new Creature[numCreatures];
for (int j = 0; j < numCreatures; j++) {
monsters[j] = new Creature();
// Or a list
int numCreatures = randomGeneratedCreatureQuantity();
ArrayList monsters = new ArrayList();
for (int j = 0; j < numCreatures; j++) {
monsters.add(new Creature());
}Good luck
Lee

Multiple Portal instances on the same machine

Hi Forum,
we have a requirement where in we are asked to implement multiple instances of Portal on the same machine. can you please give me some detials on Feasibility , issues and limitations of having multiple Portal instances on the same machine , different instances pointing to different tiers(Dev, Test, Production) etc
pointers will be highly appreciated..
regards,
uday

Hi Uday,
Please look at this.
Multiple Portal Instances - Virtual Hosting
Regards,
Siva
P.S: Award points if you find this useful.

Cant open external links and multiple instances of the same profile.

I have multiple firefox profiles.
I constantly have two profiles running at the same time.
I use microsoft outlook and see an external link, I click it wishing firefox to open it in the default or new browser. It does not and says "FIrefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system."
Firefox is running fine.
How can I open external links with a profile based setup?
Also, how can I open multiple instances of the same profile? I find that if I click and drag a tab to another monitor, it opens a new "instance" or browser window.

You say
''I have multiple firefox profiles. <br />
I constantly have two profiles running at the same time. ''
So you will have discovered ''-no-remote'' Note NOT to use that on the default browser; profile, only on secondary profiles.
* http://kb.mozillazine.org/Profile_in_use#Common_causes
You will NOT be able to open multiple instances of the same profile, clone the profile if necessary.
If you are trying to run multiple Webmail accounts in one profile then you may well find the webmail is identifying and setting the user account that is opened. Use a Private Browsing window to get round that and open a second account.
* [[Private Browsing - Browse the web without saving information about the sites you visit]]

Multiple instances of the same entity bean?

I am designing a J2EE application that is made up of a number of separate components that each have a well-defined responsibility. Each component is made up of one or more J2EE components (web clients and EJBs). I want to design the application such that it is easy in the future to deploy each component (or a group of components) on different servers. In order to do this I need to make sure that the interfaces between each component are exposed as remote interfaces (but I will use local interfaces inside each component). However, there are a number of entity beans that need to be accessed by more than one component. I am wondering how best to expose these entity beans. I believe there are a number of options:
1. Expose remote interfaces on each of the shared entity beans. The disadvantage of this approach is that it is inefficient and that I will not be able to take advantage of container managed relationships. (I am intending to use container managed persistence.)
2. Create a facade object (stateful session bean) for each of the entity beans which exposes a remote interface and in turn accesses the shared entity beans locally. The disadvantage of this approach is that I have to create some extra EJBs and that I cannot directly make use of container managed relationships etc from the client component.
3. I don't know if this is an option but I am wondering whether I can deploy a copy of each shared entity bean with each application component. The advantage of this approach is that the component would access the entity locally and could make use of container managed relationships. However, I don't know what the issues are with having more than one instance (per primary-key) of an entity in the same application. I don't know whether this would cause errors of whether they would get out of sync (because different instances with the same primary key would be updated by different clients). Initially each component would be deployed in the same server but later they would be deployed in different servers. In both cases with this option each component (JAR) would have copies of the shared entity bean classes.
Any suggestions as to the best approach and whether the last option is feasible would be much appreciated.
Thanks.

I think 2 beats 1. The main reason being to minimise the number of network calls. You're basically asking, are fascades a good idea? and the answer is yes.
You can obviously do 3 in different app servers. However you'll need to configure your app servers so they can handle the fact that they're not the only ones updating the database. This is to handle concurrency as you mentioned. How you do this will depend on your app server and will affect performance, but shouldn't be a problem.
I think you should definately decide up front what's going in different app servers, I dunno if 3 would work in the same app server.
Why do you would want to use multiple app servers?
Why not have everything in the same app?
Is is just the 1 database?
You can use clustering for scalability.

Multiple instances of the same bean class in session?

I�m trying to think of a way to have multiple instances of the same bean class in session scope using JSF. For example, let�s say that I have two <h:dataTable>s on the same page. They both use the backing bean called genericBean. Now, the content for genericBean will be different for each <h:dataTable>. In fact, the data source that backs genericBean is not known until runtime. It could be a database, web service, etc.
What I would like is for when JSF needs access genericBean instead of looking for the value with key �genericBean� in the session map it looks for �genericBean_[some runtime ID]�. I could specify this id in EL on a custom component, as a request parameter or whatever.
I think that I need the bean to be in session scope because the tables are complex and I want them to be editable.
I have some ideas about how I can do this but I was wondering if someone has already solved this problem or if there is a standard way to do this using tools like Shale, etc.
Thanks,
Randy

Well, I came up with an interesting solution to this so I thought that I would post it here.
I have a page that looks like this.
<html>
<head>
<title>My Page</title>
</head>
<body>
<f:view>
<f:subview id="component1">
<jsp:include page="component.jsp">
<jsp:param name="id" value="a" />
</jsp:include>
</f:subview>
<hr>
<f:subview id="component2">
<jsp:include page="component.jsp">
<jsp:param name="id" value="b" />
</jsp:include>
</f:subview>
</f:view>
</body>
</html>
And component.jsp looke like this.
<f:verbatim>
<p>
<h1>Component
</f:verbatim>
<h:outputText value=" #{param.id}" />
<f:verbatim>
</h1>
</p>
</f:verbatim>
<h:form>
<h:outputText value="#{component.id}" />
<h:outputText value="#{component.value}" />
<h:commandButton value="increment" action="#{component.increment}" />
<h:commandButton value="decrement" action="#{component.decrement}" />
<f:verbatim>
<input type="hidden" name="id"
value="</f:verbatim><h:outputText value="#{param.id}"/><f:verbatim>" />
</f:verbatim>
</h:form>
The idea is that I want component.jsp to be initialized differently based on the id param. The component managed bean is configured to be in session scope but I want the component instance for id a and id b to be different instances in session scope. Therefore, I added a custom variable resolver to handle this.
public Object resolveVariable(FacesContext context, String name) {
// This id will be different for the different subviews.
HttpServletRequest request = (HttpServletRequest) context.getExternalContext() .getRequest();
String id = request.getParameter("id");
// If there is an id in the request then check if this is a bean that can have multiple
// instances in session scope.
if ((id != null) && (id.length() > 0)) {
ExternalContext ec = context.getExternalContext();
// Build the new name for the key of this bean
String newName = name + "_" + id;
Object value = null;
// See if the bean instance already esists.
if ((null == (value = ec.getRequestMap().get(newName))) &&
(null == (value = ec.getSessionMap().get(newName))) &&
(null == (value = ec.getApplicationMap().get(newName)))) {
     // We could not find the bean instance in scope so create the bean
     // using the standard variable resolver.
value = original.resolveVariable(context, name);
// Now check if the bean implements that page component interface. If it is
// a page component then we want to rename the key to access this bean so
// that the instance is only used when the id is provided in the request.
// For example, if there are two components (a and b) we will have in session scope
// component_a and component_b. The will each point to a unique instance of the
// Component bean class.
if (value instanceof PageComponent) {
// Try to get the value again
if (null != (value = ec.getRequestMap().get(name))) {
     // Initialize the bean using the id
((PageComponent) value).initInstance(id);
ec.getRequestMap().remove(name);
ec.getRequestMap().put(newName, value);
} else if (null != (value = ec.getSessionMap().get(name))) {
((PageComponent) value).initInstance(id);
ec.getSessionMap().remove(name);
ec.getSessionMap().put(newName, value);
} else if (null != (value = ec.getApplicationMap().get(name))) {
((PageComponent) value).initInstance(id);
ec.getApplicationMap().remove(name);
ec.getApplicationMap().put(newName, value);
return value;
return original.resolveVariable(context, name);
}

How to find out multiple instances of the same application

Hi,
Please help me with your Java Networking expertise.
Is there any way you could suggest where we could know how many instances of the same application is running in a network ?
Sending a UDP packet would require to specify the destination of the machine's IP address.
But when the same application is installed in two different machines, at run time both the instances should be able to communicate dynamically. Is there any way I can send a signal(packet) that should be picked up by the other application instance ? Both the machine are in the same network.
Thanks,
Deb

I guess there are many ways to do it. One simple way would be to broadcast a mesage whenever an instance starts up. Other running instances can then communicate back to it.

How can I stop two instances of the same application?

I have just installed Yosemite about a week ago on my MacBook Pro mid '10 and it's working great except for one little glitch.
Whenever I double-click on a file in my Finder, not only does it open in the assigned dock Application, but a second instance of the same Application pops up on the dock out of nowhere. To be more clear, I have my PDFs set to Preview. I click on a PDF in my Finder and Preview starts jumping. Out of nowhere, another copy of Preview springs up on the dock and starts jumping as well. This opens that same PDF twice on my screen.
I noticed this also happens when I'm installing a .dmg file. Two installers open at the same time when I double-click the icon.
It doesn't happen if I right-click > Open or right-click > Open With.
Any thoughts?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

How do I relink multiple instances of the same image, in Illustrator CC?

Is there a feature, like InDesign, where links automatically relink if they're in the same folder?
Currently I have to search through the file structure multiple times even if the linked image is the same.
Surely Illustrator should relink all instances of the same image and give the option search for any additional missing links in the same folder?
I'd love to be pointed in the right direction, or if anyone has a script they've written to solve the problem, do let me know.
Cheers

try the script (version 3) in this post,
Remember last folder location lost with Mac Lion updates

Using the same correlation set to multiple instances of the same process

Hi all,
Assuming that I have a Purchase Order with multiple items and I have a BPEL process that is triggered for each item.
When the Purchase Order is cancelled by the customer, I want to cancel all BPEL process that is still running. I'm using SOA Suite 11.1.1.2.
My first attempt was to use an event handler associated to a cancellation operation, but I couldn't do this because when the second BPEL instance was started, a conflictingReceive BPEL Fault is triggered. This occurs because BPEL can't have more than one active receive/on message using the same correlation set.
Another way to do this is using a different correlation set for each instance (somethig like a composite key - Purchase Order ID + Item ID, i.e), but in this way I need to know all composite key in advance and send one message to each instance specifically.
Anyone have any suggestion of how to cancel more then one instance of the same BPEL process using Event or a generic way that does not need to send one message for each instance?
Events work very well to start more then one BPEL process but does not work well to receive an intermediate message during process execution because in this case we need correlation set to associate the event with the correct instance and BPEL does not support more then one instance of the same BPEL process waiting for the same correlation set.
Any suggestion will be very welcome.
Thanks in advance,
Rafael

Never mind. I got it.
I put the iisforward.dll and .ini is a seperate folder, and edited the iisproxy.ini's to include the portnumber like this. And I changed the hostheaders in IIS to Site1, Site2 etc
vhost1=Site1:80
Site1:80=C:\Sites\Site1\iisproxy.ini
vhost2=Site2:80
Site2:80=C:\Sites\Site2\iisproxy.ini
vhost3=Site3:80
Site3:80=C:\Sites\Site3\iisproxy.ini

Best practice for multiple instances of the same BEX query

Hi there,
I'm wondering what's the best way to use multiple instances of the same BEX query. Let me explain what I mean:
I have a dashboard with different queries feeding different period of time such as: week to date, month to date and so on. One query for each since it is based on a user exit.
For each query I want to show different data in different sections of my dashboard. Per example: sales per directors or sales per customer group, sales per day, sales per week and the like.I tried to connect a simple bar chart via a direct connection but with no success due to the multiple lines generated by the addition of the sales director, customer group, week number and so on.
My question is about the way to connect the different queries efficiently in order to show the different data while avoiding multiple useless lines.
The image above shows the query browser where, per example, for a Month to date query there will be mutiple line for each week as well as one line for each director. If, for two different components, I want to show data per week and data per director or other representation what is the best practice:
Add another instance of the same query and only put the week information and another one will only the director info?
Should I bind those to the excel file and use formulas to make final calculations?
Will there be a performance issues for adding different instances of the same query
I have 6 different queries (read 6 user exit that filters time via user exit).
Depending on the best practices there might be 4 instances for each for a total of 24 instances in the query browser.
I hope my question is clear enough, if not please do not hesitate I'll clarify as much as possible.
Regards,
Steve

Hi Steve,
Might be trying for solution for a long time, If i understood your question clear let me clarify you few points.
You are trying to access the bex query which is designed with the exit's in the background based on the logic and trying to call the entire dimensions and key-figures in a single connection. Then you are trying to map those data in the charts.
Steve, try to make more connections based upon the logic and split them. use the same query but split them by sales per customer group, sales per day, sales per week by making three different connections and try. You can merge the prompts from all connections.
Hope this Helps!!!
Sorry if i misunderstood your question.
--SumanT

Multuple instances at the same node, jk-connector

Similar Messages

Maybe you are looking for