Multy level BOM & RG1 updation

Hi all,
we r doing multy level bom in sales order
EX: project item is TAP
      equipment item is TAN(finished material)
    component itam is BTAN
we r maintaing pricing at TAN leval and BTAN pricing is statistical.But we r delivering BTAN itams under tae TAN, procuring the materials for TAN bom wise and not delivering the TAN but how the RG1 register will b update.
Sales process.
Inquiry-quotation-s.order-deliver(BTAN means semifinished+ bought only)-proforma invoice with JEX - excise invoice.
and commarcial invoice with billing plan TAN item wise only.
ONE MORE ISSUE is the delivery status of the equipment(TAN) in sales order is open because we r not maintin stock not delivery.how the equipment(TAN) will b updated in RG1 register
regarsd,
srinivas

RG1 will be updated according to the Goods Issue documents (MB03).
which will be against to specific movement type.
in your issue, if you are delivering the main item or sub item goods- specific material doc against to this movement type will be generated ( doc type:WL), which will be seen in delivery doc flow:Goods issue document.
RG1 will update only for this material document, not for those items, whcih is nto actually delivered.

Similar Messages

  • BOM Multy level

    Hi all,
    we r doing multy level bom in sales order
    EX: project item is TAP (In material master item cat.group LUMF)
    equipment item is TAN (In material master item cat.group NORM)
    component itam is BTAN (In material master item cat.group NORM)
    My issue is when we r creating a sales order BOM is exploded in sales order like..
    10-mat-mat disc-qty-TAP
    20-mat-mat disc-qty-TAN--10(highlvl)
    30-mat-mat disc-qty-BTAN--20
    40-mat-mat disc-qty-BTAN--20
    50-mat-mat disc-qty-BTAN--20   All the BTAN Items delevired But system still showing TAN item is open how can i close the main item(TAN)
    Thanks,
    sreenivas

    Hi,
    Does your material which has item category TAN came in the delivery document or not.
    If not then go to VOV7 and select TAN and execute.
    Item relevant for delivery should not be activated.
    Go to VOV6 and select the schedule line category which is determined for the TAN material in the sales order and execute.
    Activate the item relevant for delivery for your schedule line category.
    Now check whether it coming in your delivery document or not.
    If its coming to the delivery document n still its not updating.
    Then go to VTLA and select your sales order and delivery document combination.
    Go to the item level and select your item category TAN and execute.
    In that activate the update document flow and save the setting.
    Now create the sales order and do the delivery.
    Now check whether it is updating or not.
    Regards
    Raj.

  • Adding alternate component in the same BOM for 2 level BOM setup

    Hello,
    I have a BOM with the following setups -
         BOM_A components are BOM_B, Comp_A1, Comp_A2
         BOM_B components are Comp_B1, Comp_B2
    The need is to have an a BOM with components Comp_B1, Comp_B2, Comp_C1. if I create this as an Alt of BOM_B, how can I use this alternate in BOM_A?
    Can anyone please let me know if there is a way to specify the alternate of BOM components in multi level BOM?
    Regards,
    Manju

    Hello Manju,
    Can you please specify the exact business requirement.
    Why this is required at BOM Level?
    If BOM_B (comp_B1,comp_B2 & comp_C1) is Alt. bom & WIP job completed using this Alt. BOM then syste will take care / consider valuation as per Alt. BOM for first level bom (BOM_A) WIP job.
    Thanks
    NS

  • Incoterms on Item level is not updated on STO.

    Issue: they have created a STO with wrog incoterm, now the issue is that the Incoterms on PO--> Item level is not updated if Incoterms on Header level is changed. I suggested them to change incoterm on item level manually, but user is saying the problem is that SAP doesn't change automatically Incoterms on item level if Incoterms on Header level are changed??
    What user is saying..Is this correct? or any thoughts/solution to fix this issue?
    Can anyone suggest me on this?
    Thanks & Regards
    Suresh Babu

    HI,
    Try this link
    How Incoterms gets defaulted for STO
    Regards
    KK

  • Gneration of multiple Production Order from multi level BOM

    Hi Experts,
    My customer has multi level BOM. meaning child item also has its own BOM - 4 Level.
    FG-Pack - Make
          FG - Make
               SFG - Make
                    RM - Buy
    Their process is once they create Production Order for final Finished Good, System should also create Production order for child which it self are of make type and has own BOM defined in system.
    They wish that once the create Production order for FG-Pack, system should automatic generate production order for FG and SFG as both of these has BOM defined and are of procurement type Make.
    So first they will close the chile production order and receives qty. in ware house, they will issue this child qty. against main production order, and then completes the main production order.
    So they remains informed about the child item stock.
    My question is SAP Business One supports creation of multiple Production Order?
    BR
    Samir Gandhi

    Hi Samir Gandhi,
    There is no build-in function for this task. You need add-on or SDK for the job.
    If the sub level BOM items are phantom, you can create a big production order including all sub BOM components. That is system supported.
    Thanks,
    Gordon

  • Multi Level BOm is not working in SAP afs

    Hi Experts,
             I am facing issue in MRP.For multi level bom's ,Requirements is not getting generates.Is there any settings is there to active multi level bom for afs materials.
    please suggest solution
    Thanks and Regards,
    Deepika.

    Hello Deepika,
    As we know AFS materials are planned at SKU level (Grid and stock categories)  you can use AFS MRP (/N/AFS/MD02) only.
    Please refer OSS note Note 981747 - FAQ - AFS Production Planning
    Question 5 Made-To-Order Planning -Multi-Level (MD50) does not work for AFS Materials and Sales Orders containing AFS materials.
    Answer: Made to Order Multi level planning functionality was never enhanced for AFS and hence transaction MD50 is not supported.
    Steps are as,
    1. Create a MTO/PTO sales order for an AFS material.
    2. Run AFS MRP using transaction code /AFS/MD02.
    3. Convert the planned order to production order.
    Best Regards,
    R.Brahmankar

  • For  MTO scenario,multi level bom is not working sap afs pp

    Hi Experts,
                  We are implementing MTO scenario for our client. I have maintained  strategy group for FERT is 40 and strategy group for HALB and ROH are 20.
                   For single level BOM , requirements is not getting generates properly.
                  I would like to know What are all the settings is required to create AFS BOM.(single and multi level)
                   Please suggest me.
    Thanks & Regards,
    Deepika.

    Hello Deepika,
    As we know AFS materials are planned at SKU level (Grid and stock categories)  you can use AFS MRP (/N/AFS/MD02) only.
    Please refer OSS note Note 981747 - FAQ - AFS Production Planning
    Question 5 Made-To-Order Planning -Multi-Level (MD50) does not work for AFS Materials and Sales Orders containing AFS materials.
    Answer: Made to Order Multi level planning functionality was never enhanced for AFS and hence transaction MD50 is not supported.
    Steps are as,
    1. Create a MTO/PTO sales order for an AFS material.
    2. Run AFS MRP using transaction code /AFS/MD02.
    3. Convert the planned order to production order.
    Best Regards,
    R.Brahmankar

  • Generic data source for muliple level BOM

    Hi Bhanu & everyone,
    Whats the best way to create a gereic data source for muliple level BOM (STKO, STPO & MAST tables) in BW? I also need to maintain the history.
    Thanks,
    Aniruh.

    Hi Anirudh,
    You can create a view of those tables using transaction se11 and then create a datasource using transaction rso2.
    Hope this helps.
    Regards,
    Diego

  • I have an iMac S/N QP******VUW currently running OSX 10.5.8. 2.16 GHz Intel Core 2 Duo with 2GB 667 MHz RAM. To what OSX level can I update this model?

    I have an iMac S/N QP******VUW currently running OSX 10.5.8. 2.16 GHz Intel Core 2 Duo with 2GB 667 MHz RAM. To what OSX level can I update this model?
    <Edited By Host>

    Noel Kuck wrote:
    I tried adding more ram but the Mac would't even boot with 2x2GB installed. I figured that it was limited so I forgot about it. Wha's the advantage of adding it if it is not recognized?
    Chances are you either did not install or correctly or added the incorrect RAM.

  • How to get first level BOM material if I know 4th level material code only?

    Dear all,
    I have 4th level BOM material only. How to find first level ( finish material) BOM material ?
    We can find bottom level material easily through CS11 if we know top level material.
    But how to find top material if we don't know ? we know only bottom most material.........
    Thanks....

    Kishore,
    Multiple runs of "CS15" will help you.
    Regards,
    Prasobh

  • Can I Create a BOM by Extending from a 2 Level BOM ?

    I am creating a BOM using transaction ZC31.  I want to create my BOM by extending selected items (BOMs) from a 2 level BOM.  In other words I want to extend some of the BOMs in my 2 level BOM to the one I am creating.  Is there a way to do that other that extending them one by one?

    Yes and No:
    No, you can not - as in FCPX - create your own 'Share Destinations', iM lacks (officially) any APIs too teach it new tricks.
    Yes, export from with iM in a high-res format (e.g. 1080 Apple devices), and use that as source for any Compressor output Same workflow, for free, would do Mpeg Streamclip, the most recommended converter tool for MacOs....

  • BOM Global Update

    Hi Experts,
    I have a question regarding the functionality of the BOM Global update.  How is this option supposed to work exactly?
    If I update the price of:
    1. A component within the BOM screen
    2. The parent item within the BOM screen
    3. The parent item within the Item Master Data screen
    The BOM is not then suggested for update on running the Global update option.
    The Global update function only seems to pick up BOMs where the component prices have been updated outside the BOM screen (for example in the Item Master Data screen).
    Is this correct?  My customer is wondering why other changes to BOM parent and component prices do not result in the BOM being suggested for a price change within Global Update
    Thanks
    Greig

    Hi Greig,
    Your observation would be correct.  Global Update option may only apply if somewhere else also need the update.  If all updates are confined within BOM, it should not trigger this function.
    Thanks,
    Gordon

  • Multi-level BOM explosion using CS_BOM_EXPL_MAT_V2

    Hi All,
    I would like to know, if anyone has used the function module 'CS_BOM_EXPL_MAT_V2' to prepare a report to read multi-level BOM just like CS12. If anyone has, can you please let me know how we can read the individual materials in the BOM from this FM.
    Hope my question is clear, await inputs.
    Vivek

    Hi vivek,
    We use this code to restrict the BOM line item for particular movements. C if that can help u out.
    CALL FUNCTION 'CS_BOM_EXPL_KND_V1'
        EXPORTING
          capid                       = ''
          datuv                       = sy-datum
          emeng                       = 1
         mehrs                       = 'X'
          mtnrv                       = i_mseg-matnr
          stlal                       = '1'
          stlan                       = '1'
          stpst                       = 0
          svwvo                       = 'X'
          werks                       = i_mseg-werks
          vbeln                       = aufk-kdauf
          vbpos                       = aufk-kdpos
            VERID                       = ' '
          vrsvo                       = 'X'
          IMPORTING
            TOPMAT                      =
            DSTST                       =
         TABLES
           stb                         = ZStb
            MATCAT                      =
        EXCEPTIONS
          alt_not_found               = 1
          call_invalid                = 2
          material_not_found          = 3
          missing_authorization       = 4
          no_bom_found                = 5
          no_plant_data               = 6
          no_suitable_bom_found       = 7
          conversion_error            = 8
          OTHERS                      = 9
      IF sy-subrc <> 0.
          MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                  WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      SORT zstb BY mtart.
      LOOP AT zstb.
        IF zstb-mtart = 'Material type ' OR zstb-mtart = 'Material type ' .
        ELSE.
          DELETE zstb .
        ENDIF.
      ENDLOOP.
      CLEAR: v_menge, v_matnr, v_bwart, vv_menge, vvv_menge, zstb.
      LOOP AT zstb.
        SELECT menge matnr bwart
        INTO   (v_menge,v_matnr,v_bwart)
        FROM   aufm
        WHERE  aufnr = i_mseg-aufnr
        AND    werks = i_mseg-werks
        AND    matnr = zstb-idnrk
        AND    ( bwart = '261' OR bwart = '262' ).
              and    meins = 'FT2'.
         LOOP AT zstb.
          SELECT SINGLE matnr INTO vv_matnr FROM mara  WHERE  matnr = v_matnr
                                       AND mtart = zstb-mtart.
          IF sy-subrc = 0.
            CASE v_bwart.
              WHEN '261' .
                vv_menge = vv_menge + v_menge.
              WHEN '262' .
                vvv_menge = vvv_menge + v_menge.
            ENDCASE.
          ENDIF.
             ENDLOOP.
        ENDSELECT.
        CLEAR vf_menge.
        vf_menge = vv_menge - vvv_menge.
        CLEAR vv_menge.
        CLEAR vvv_menge.
    Regards,
    Vishal

  • Return sales  of header level BOM subcomponents

    Dear guru's,
    I have maintained a Header level BOM where Item category group is ERLA.
    therefore prices and cost being determined on the header level only.
    I have done the delivery and billing for this BOM .
    Now scenario is that I want to create Return Delivery for the subcomponents of the BOM and not for the entire BOM. But there is no provision in standard for such kind of scenario. I cheked item category determination also and copy control aslo. I am not able to create for subcomponents with the inventory and financial impacts.
    please help me by providing the steps by step configuration for this scenario that I can get all the inventory and financial effects correctly.
    Suggestions are also welcome.
    regards,
    Vojas

    hello, friend.
    oh, i see your requirement more clearly!  you have several options...
    1)  manual entries without BOM
    personally, i would rather enter the components in the returns order manually, without the BOM main material.  the components will have item category REN (standard).
    2)  manual entries with BOM
    enter all materials individually in the returns order.  make sure the item category REN is determined for your components.  for your main item, make the item category RETX (text item).  let us assume that your returns doc type is ZRE...
    order type ZRE + item category grp ERLA  = RETX
    order type ZRE + item category grp NORM = REN
    3)  automatic BOM explosion
    if the components have to reference the main item, and if you want automatic explosion, you will need to make assignments in VOV4.  in addition to the settings in #2, in VOV4 you should assign:
    doc type ZRE + item category grp ERLA + higher level item RETX = item category REN
    hope this helped.
    regards and thank you.

  • Multi level BOM explosion

    Hi,
    For multilevel BOM explode I have to use the "Functional Module" CS_BOM_EXPL_MAT_V2. I checked it in system but I didnt understand which input parameters I need to give (Which are mandatory) as ther are lot of input fields available.
    Please suggest whether this Functional Module is fine OR there is any other way? also suggest about the input field data.

    Dear
    Function module CS_BOM_EXPL_MAT_V2 is used for BOM explosion for a given material. It belongs to function group CSS4 u2013 BOM explosions. This function module can explose multi-level BOM with a given validation date.
    You need to specify necessary input parameters to call this function module, such as CAPID u2013 App ID, DATUV u2013 Validation date, MEHRS u2013 Multi-level, MTNRV u2013 Material number, STLAL u2013 alternate, STLAN u2013 BOM usage.
    Some useful tables you can provide to your ABAPer and discuss the same .
    TABLES: MARA,                               "Master Data
            MAKT,                               "Matl Desc.
            MARC,                               "Plant Data for Matl.
            MAST,                               "Bom to material link
            STKO,                               "Bom Header
            STPO.                               "Bom Item
    Refer : Multi-level BOM explosion using CS_BOM_EXPL_MAT_V2
    Regards
    JH
    Edited by: Jiaul Haque on Jan 3, 2011 10:24 PM

Maybe you are looking for