Muse 2014 - Problems after converting a Site with Safari

After converting a site to muse 2014 and exporting it to html the JS-error message "Einige der Dateien auf dem Server fehlen oder sind ungültig. Löschen Sie den Browser-Cache und versuchen Sie es erneut. Wenn das Problem weiterhin besteht, wenden Sie sich an den Autor der Website." ("Some of the files of the server are missing or incorrect") apears when opening every site.
I did not made any change to the site itself, the site was only converted and re-exported.
The error is only shown with Safari, but i only tried with IE 10 under Windows

When you republish your site, make sure you upload all files. New versions of Muse may change JavaScript files or CSS files for pages that you have not changed. The error message is indicating there are expected files that are missing or that files it found and loaded were generated from an older version and need to be updated.

Similar Messages

Problems after transfering Cost centers with LSMW

Hi,
I have a problem after transfering Cost Centers with LSMW.
The first Batch input run created all cost centers in one CC Group erroneously - cause they should be placed in different CC groups.
I changed LSMW settings and made another batch input run - now the Cost centers were created in proper groups. I think that I deleted all CC's created in previous batch input run, but now I am not too sure, because there is a problem...
Cost centers exist both in their proper groups and in the one group mentioned by me before. So there is such situation that Cost center appears in Standar hierarchy twice at the same time.
When I delete cost centers - they are removed from their proper groups but the CC entry remains in that one group - all CC are there inactive.
How can I get rid of them. I tried deleting them - but it's impossible - the system doesn't see them.
When I run the batch input again - the same cost centers appear in proper groups and at the same time they become active in the one group. The standard hierarchy group is not UNIQE.
Please advice me how to delete these entries from standard hierachy.
Best wishes,
Karol

Hi,
Always recommended before loading into live system: upload in test system and check. check again just to make sure all is correct before real load.
In your case you probably would have been best to do a group change after incorrect upload.
Do Ambiguity check in stadnard hierarchy to explore all incorrect entries. Depending on your version yo ucan change in that function (ECC6) ore need to run a report. Before running the report check that CC master records have correct entry. The report is RKCORRH1
Again, try in QA first and run in Test Run
Good luck
Hein

Having trouble loading ATT and CenturyLink sites with safari now, anyone else having this problem?

having trouble loading ATT and CenturyLink sites with safari now, anyone else having this problem?

Howdy MacRocker,
Thanks for using Apple Support Communities.
To start with troubleshooting an issue like this where you're unable to load certain websites in Safari, I suggest that you clear out your browser history and website data.
Safari 8 (Yosemite): Clear your browsing history
Happy Holidays!
Alex H.

Having some problems with JAVA sites with safari, opera and firefox

I work with some online java application for my work. Since I updated to Leopard, I cant access the site with safari, I loose some options with Opera and Firefox...
Is it the JAVA that is not up to date with leopard?
Any updates soon?
Help!!!

I have experienced memory leaks with the jvm on Leopard. Seem they took a huge step backwards instead of forward.
It should be obvious by now that they didn't include 1.6 as many publications alluded to (Still haven't seen any explicit word from Apple where they officially said "Yes, Leopard WILL have JVM 1.6 at time of launch".)
Don't know if the url below will get filtered out, but many other (non-Apple controlled) forums have been saying nasty things about Apple not explaining themselves for this major snafu.
The article is titled, "So Long Apple. The Party's Over" and hosted by Java Lobby dot org.
http://www.javalobby.org/java/forums/t102936.html

Try to preview my site with Safari, but Safari says it can't find the page, what should i do???

Try to preview my site with Safari, but Safari says it can't
find the page, what should i do???

Post a link to the page, please.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"NikoNeedsHelp" <[email protected]> wrote in
message
news:fq2flr$dma$[email protected]..
> Try to preview my site with Safari, but Safari says it
can't find the
> page, what should i do???

TS4001 Anybody having problems accessing Adwords Exspress login with Safari ?

Anybody having problems accessing Adwords Exspress login with Safari ?

Hi jhankins,
There was a problem yesterday for a brief half an hour to 1 hour, please let us know if you are still facing that issue.
-Ankit

Election problem after repeated split-brains with two nodes

Hi
I'm using a customized source based on BDB-5.1.19 (excxx_repquote)
with two site one - MASTER and the other SLAVE...
nsite=2
ack=quorum
- the master is writing to quotedb at a rate of 10 txn per sec
- the test consist to isolate the client from the master (split brain) and reconnect it after a random time include from 1sec to 10sec
the test run well about 10 times but at a moment the process slave receive DB_EVENT_REP_ELECTION_FAILED
and the master enter in election mode and never exit from the CLIENT mode. I must say that to freeze the client I decide to kill me (kill -9 my pid) when I receive such event...
here is the verbose log on the master...
[1307872770:871621][6510/47655809107168] MASTER: rep_send_function returned: 110
[1307872770:973655][6510/47655809107168] MASTER: bulk_msg: Send buffer after copy due to PERM
[1307872770:973667][6510/47655809107168] MASTER: send_bulk: Send 266 (0x10a) bulk buffer bytes
[1307872770:973672][6510/47655809107168] MASTER: /opt/bdb/ rep_send_message: msgv = 5 logv 17 gen = 68 eid -1, type bulk_log, LSN [21][986648] perm
[1307872770:973693][6510/47655809107168] MASTER: will await acknowledgement: need 1
[1307872771:26623][6510/47655809107168] MASTER: rep_send_function returned: 110
[1307872771:126380][6510/1162996032] MASTER: /opt/bdb/ rep_process_message: msgv = 5 logv 17 gen = 70 eid 0, type log, LSN [21][946345]
[1307872771:126407][6510/1162996032] MASTER: /opt/bdb/ rep_send_message: msgv = 5 logv 17 gen = 68 eid -1, type dupmaster, LSN [0][0] nobuf
[1307872771:126695][6510/1162996032] MASTER: rep_start: Found old version log 17
[1307872771:126753][6510/1162996032] CLIENT: /opt/bdb/ rep_send_message: msgv = 5 logv 17 gen = 68 eid -1, type newclient, LSN [0][0] nobuf
[1307872771:126833][6510/1183975744] CLIENT: starting election thread
[1307872771:126876][6510/1183975744] CLIENT: Start election nsites 2, ack 1, priority 100
[1307872771:126890][6510/1183975744] CLIENT: Election thread owns egen 69
[1307872771:127423][6510/1173485888] CLIENT: /opt/bdb/ rep_process_message: msgv = 5 logv 17 gen = 70 eid 0, type newclient, LSN [0][0]
[1307872771:130079][6510/1183975744] CLIENT: Tallying VOTE1[0] (2147483647, 69)
[1307872771:130113][6510/1183975744] CLIENT: Beginning an election
[1307872771:130134][6510/1183975744] CLIENT: /opt/bdb/ rep_send_message: msgv = 5 logv 17 gen = 68 eid -1, type vote1, LSN [21][986728] nobuf
[1307872771:130147][6510/1173485888] CLIENT: /opt/bdb/ rep_send_message: msgv = 5 logv 17 gen = 68 eid -1, type master_req, LSN [0][0] nobuf
[1307872771:130438][6510/1152506176] CLIENT: /opt/bdb/ rep_process_message: msgv = 5 logv 17 gen = 70 eid 0, type vote1, LSN [21][946437]
[1307872771:130460][6510/1162996032] CLIENT: /opt/bdb/ rep_process_message: msgv = 5 logv 17 gen = 70 eid 0, type alive, LSN [21][986728]
[1307872771:130467][6510/1152506176] CLIENT: Updating gen from 68 to 70
[1307872771:130482][6510/1162996032] CLIENT: Received ALIVE egen of 71, mine 69
[1307872771:130503][6510/1162996032] CLIENT: Election finished in 0.003602000 sec
[1307872771:130515][6510/1162996032] CLIENT: Election done; egen 70
[1307872771:130534][6510/1152506176] CLIENT: Received vote1 egen 71, egen 71
[1307872771:130581][6510/1152506176] CLIENT: Tallying VOTE1[0] (0, 71)
[1307872771:130593][6510/1089075520] CLIENT: starting election thread
[1307872771:130619][6510/1152506176] CLIENT: Incoming vote: (eid)0 (pri)100 ELECTABLE (gen)70 (egen)71 [21,946437]
[1307872771:130642][6510/1152506176] CLIENT: Not in election, but received vote1 0x282c 0x8
[1307872771:130674][6510/1089075520] CLIENT: Start election nsites 2, ack 1, priority 100
[1307872771:130692][6510/1089075520] CLIENT: Election thread owns egen 71
[1307872771:130704][6510/1194465600] CLIENT: starting election thread
[1307872771:130733][6510/1194465600] CLIENT: Start election nsites 2, ack 1, priority 100
[1307872771:132922][6510/1089075520] CLIENT: Tallying VOTE1[1] (2147483647, 71)
[1307872771:132949][6510/1089075520] CLIENT: Accepting new vote
[1307872771:132958][6510/1089075520] CLIENT: Beginning an election
[1307872771:132973][6510/1089075520] CLIENT: /opt/bdb/ rep_send_message: msgv = 5 logv 17 gen = 70 eid -1, type vote1, LSN [21][986728] nobuf
[1307872771:132985][6510/1194465600] CLIENT: election thread is exiting
[1307872771:133012][6510/1089075520] CLIENT: Tallying VOTE2[0] (2147483647, 71)
[1307872771:133037][6510/1089075520] CLIENT: Counted my vote 1
[1307872771:133048][6510/1089075520] CLIENT: Skipping phase2 wait: already got 1 votes
[1307872771:133060][6510/1089075520] CLIENT: Got enough votes to win; election done; (prev) gen 70
[1307872771:133071][6510/1089075520] CLIENT: Election finished in 0.002367000 sec
[1307872771:133084][6510/1089075520] CLIENT: Election done; egen 72
[1307872771:133111][6510/1089075520] CLIENT: Ended election with 0, e_th 1, egen 72, flag 0x2a2c, e_fl 0x0, lo_fl 0x6
[1307872771:133170][6510/1173485888] CLIENT: /opt/bdb/ rep_process_message: msgv = 5 logv 17 gen = 70 eid 0, type alive, LSN [0][0]
[1307872771:133187][6510/1173485888] CLIENT: Racing replication msg lockout, ignore message.
[1307872771:173744][6510/1162996032] CLIENT: /opt/bdb/ rep_process_message: msgv = 5 logv 17 gen = 70 eid 0, type vote2, LSN [0][0]
[1307872771:173769][6510/1162996032] CLIENT: Racing replication msg lockout, ignore message.
[1307872771:231593][6510/1183975744] CLIENT: Ended election with 0, e_th 0, egen 72, flag 0x2a2c, e_fl 0x0, lo_fl 0x1c
[1307872771:231629][6510/1183975744] CLIENT: election thread is exiting
[1307872777:443794][6510/1131526464] CLIENT: init connection to site 2.0.0.210:12345 with result 115
[1307872971:644194][6510/1131526464] CLIENT: init connection to site 2.0.0.210:12345 with result 115
[1307873165:844583][6510/1131526464] CLIENT: init connection to site 2.0.0.210:12345 with result 115
[1307873360:44955][6510/1131526464] CLIENT: init connection to site 2.0.0.210:12345 with result 115
[1307873554:245347][6510/1131526464] CLIENT: init connection to site 2.0.0.210:12345 with result 115
[1307873748:445736][6510/1131526464] CLIENT: init connection to site 2.0.0.210:12345 with result 115
[1307873942:646117][6510/1131526464] CLIENT: init connection to site 2.0.0.210:12345 with result 115
[1307874136:846509][6510/1131526464] CLIENT: init connection to site 2.0.0.210:12345 with result 115
.... and infinite stay to this situation
My question is why the Master is suddenly transformed into CLIENT and why it's never returning to the MASTER
Thanks in advance ...
here is the log for the client
[1307872315:455113][1282/1181583680] MASTER: /opt/bdb/ rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type log, LSN [21][984396]
[1307872315:455134][1282/1160603968] MASTER: /opt/bdb/ rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type log, LSN [21][984483] perm
[1307872315:609962][1282/1181583680] MASTER: /opt/bdb/ rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type bulk_log, LSN [21][984733] perm
[1307872315:764958][1282/1181583680] MASTER: /opt/bdb/ rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type bulk_log, LSN [21][984986] perm
[1307872315:919962][1282/1181583680] MASTER: /opt/bdb/ rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type bulk_log, LSN [21][985238] perm
[1307872316:75018][1282/1181583680] MASTER: /opt/bdb/ rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type bulk_log, LSN [21][985491] perm
[1307872316:229959][1282/1181583680] MASTER: /opt/bdb/ rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type bulk_log, LSN [21][985741] perm
[1307872316:384949][1282/1181583680] MASTER: /opt/bdb/ rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type bulk_log, LSN [21][985993] perm
[1307872316:499899][1282/1181583680] MASTER: /opt/bdb/ rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type bulk_log, LSN [21][986141] perm
[1307872316:539895][1282/1181583680] MASTER: /opt/bdb/ rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type log, LSN [21][986221]
[1307872316:540078][1282/1171093824] MASTER: /opt/bdb/ rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type log, LSN [21][986307]
[1307872316:540100][1282/1160603968] MASTER: /opt/bdb/ rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type log, LSN [21][986394] perm
[1307872316:694950][1282/1171093824] MASTER: /opt/bdb/ rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type bulk_log, LSN [21][986648] perm
[1307872316:847349][1282/1129134400] MASTER: /opt/bdb/ rep_send_message: msgv = 5 logv 17 gen = 70 eid -1, type log, LSN [21][946345]
[1307872316:847698][1282/1171093824] MASTER: /opt/bdb/ rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type dupmaster, LSN [0][0]
[1307872316:847999][1282/1181583680] MASTER: /opt/bdb/ rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type newclient, LSN [0][0]
[1307872316:848168][1282/1171093824] MASTER: rep_start: Found old version log 17
[1307872316:848222][1282/1181583680] CLIENT: Racing replication msg lockout, ignore message.
[1307872316:848398][1282/1171093824] CLIENT: /opt/bdb/ rep_send_message: msgv = 5 logv 17 gen = 70 eid -1, type newclient, LSN [0][0] nobuf
[1307872316:848504][1282/1192073536] CLIENT: starting election thread
[1307872316:848542][1282/1192073536] CLIENT: Start election nsites 2, ack 1, priority 100
[1307872316:848566][1282/1192073536] CLIENT: Election thread owns egen 71
[1307872316:849634][1282/1192073536] CLIENT: Tallying VOTE1[0] (2147483647, 71)
[1307872316:849654][1282/1192073536] CLIENT: Beginning an election
[1307872316:849680][1282/1192073536] CLIENT: /opt/bdb/ rep_send_message: msgv = 5 logv 17 gen = 70 eid -1, type vote1, LSN [21][946437] nobuf
[1307872316:851403][1282/1160603968] CLIENT: /opt/bdb/ rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type vote1, LSN [21][986728]
[1307872316:851448][1282/1160603968] CLIENT: Received vote1 egen 69, egen 71
[1307872316:851470][1282/1160603968] CLIENT: Received old vote 69, egen 71, ignoring vote1
[1307872316:851481][1282/1160603968] CLIENT: /opt/bdb/ rep_send_message: msgv = 5 logv 17 gen = 70 eid 0, type alive, LSN [21][986728] nobuf
[1307872316:851538][1282/1171093824] CLIENT: /opt/bdb/ rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type master_req, LSN [0][0]
[1307872316:851558][1282/1171093824] CLIENT: /opt/bdb/ rep_send_message: msgv = 5 logv 17 gen = 70 eid 0, type alive, LSN [0][0] nobuf
[1307872316:854254][1282/1160603968] CLIENT: /opt/bdb/ rep_process_message: msgv = 5 logv 17 gen = 70 eid 0, type vote1, LSN [21][986728]
[1307872316:854275][1282/1160603968] CLIENT: Received vote1 egen 71, egen 71
[1307872316:854317][1282/1160603968] CLIENT: Tallying VOTE1[1] (0, 71)
[1307872316:854339][1282/1160603968] CLIENT: Incoming vote: (eid)0 (pri)100 ELECTABLE (gen)70 (egen)71 [21,986728]
[1307872316:854353][1282/1160603968] CLIENT: Existing vote: (eid)2147483647 (pri)100 (gen)70 (sites)2 [21,946437]
[1307872316:854369][1282/1160603968] CLIENT: Accepting new vote
[1307872316:854379][1282/1160603968] CLIENT: Phase1 election done
[1307872316:854395][1282/1160603968] CLIENT: Voting for 0
[1307872316:854407][1282/1160603968] CLIENT: /opt/bdb/ rep_send_message: msgv = 5 logv 17 gen = 70 eid 0, type vote2, LSN [0][0] nobuf
[1307872317:960344][1282/1192073536] CLIENT: After phase 2: votes 0, nvotes 1, nsites 2
[1307872317:960389][1282/1192073536] CLIENT: Election finished in 1.111809000 sec
[1307872317:960401][1282/1192073536] CLIENT: Election done; egen 72
[1307872317:960412][1282/1192073536] CLIENT: Ended election with -30974, e_th 0, egen 72, flag 0x282c, e_fl 0x0, lo_fl 0x0
Kill me !!
--- my source
on the master I run manually :
txn_rate 1
loop_rate 10
loop 1 20000
* See the file LICENSE for redistribution information.
* Copyright (c) 2001, 2010 Oracle and/or its affiliates. All rights reserved.
* $Id$
* In this application, we specify all communication via the command line. In
* a real application, we would expect that information about the other sites
* in the system would be maintained in some sort of configuration file. The
* critical part of this interface is that we assume at startup that we can
* find out
*      1) what our Berkeley DB home environment is,
*      2) what host/port we wish to listen on for connections; and
*      3) an optional list of other sites we should attempt to connect to.
* These pieces of information are expressed by the following flags.
* -h home (required; h stands for home directory)
* -l host:port (required; l stands for local)
* -C or -M (optional; start up as client or master)
* -r host:port (optional; r stands for remote; any number of these may be
*     specified)
* -R host:port (optional; R stands for remote peer; only one of these may
* be specified)
* -a all|quorum (optional; a stands for ack policy)
* -b (optional; b stands for bulk)
* -n nsites (optional; number of sites in replication group; defaults to 0
*     to try to dynamically compute nsites)
* -p priority (optional; defaults to 100)
* -v (optional; v stands for verbose)
#include <cstdlib>
#include <cstring>
#include <iostream>
#include <string>
#include <sstream>
#include <sys/types.h>
#include <signal.h>
#include <db_cxx.h>
#include "RepConfigInfo.h"
#include "dbc_auto.h"
using std::cout;
using std::cin;
using std::cerr;
using std::endl;
using std::ends;
using std::flush;
using std::istream;
using std::istringstream;
using std::ostringstream;
using std::string;
using std::getline;
#include <stdio.h>
#include <readline/readline.h>
#include <readline/history.h>
#define     CACHESIZE     (10 * 1024 * 1024)
#define     DATABASE     "quote.db"
#define     DATABASE2     "quote2.db"
const char *progname = "excxx_repquote";
#include <errno.h>
#ifdef _WIN32
#define WIN32_LEAN_AND_MEAN
#include <windows.h>
#define     snprintf          _snprintf
#define     sleep(s)          Sleep(1000 * (s))
extern "C" {
extern int getopt(int, char * const *, const char *);
extern char *optarg;
typedef HANDLE thread_t;
typedef DWORD thread_exit_status_t;
#define     thread_create(thrp, attr, func, arg)                    \
(((*(thrp) = CreateThread(NULL, 0,                         \
     (LPTHREAD_START_ROUTINE)(func), (arg), 0, NULL)) == NULL) ? -1 : 0)
#define     thread_join(thr, statusp)                         \
((WaitForSingleObject((thr), INFINITE) == WAIT_OBJECT_0) &&          \
GetExitCodeThread((thr), (LPDWORD)(statusp)) ? 0 : -1)
#else /* !_WIN32 */
#include <pthread.h>
typedef pthread_t thread_t;
typedef void* thread_exit_status_t;
#define     thread_create(thrp, attr, func, arg)                    \
pthread_create((thrp), (attr), (func), (arg))
#define     thread_join(thr, statusp) pthread_join((thr), (statusp))
#endif
// Struct used to store information in Db app_private field.
typedef struct {
     bool app_finished;
     bool in_client_sync;
     bool is_master;
     bool no_dummy_wr;
} APP_DATA;
static void log(const char *);
void checkpoint_thread (void );
void log_archive_thread (void );
void dummy_write_thread (void );
class RepQuoteExample {
public:
     RepQuoteExample();
     void init(RepConfigInfo* config);
     void doloop();
     int terminate();
     static void event_callback(DbEnv* dbenv, u_int32_t which, void *info);
     void print_stocks_size(Db *dbp);
private:
     // disable copy constructor.
     RepQuoteExample(const RepQuoteExample &);
     void operator = (const RepQuoteExample &);
     // internal data members.
     APP_DATA          app_data;
     RepConfigInfo *app_config;
     DbEnv          cur_env;
     thread_t ckp_thr;
     thread_t lga_thr;
     thread_t dmy_thr;
     // private methods.
     void print_stocks(Db *dbp);
     void print_env(DbEnv *dbenv);
     void prompt();
RepQuoteExample *g_runner=NULL;
RepConfigInfo *g_config=NULL;
class DbHolder {
public:
     DbHolder(DbEnv env, const char _dbname) : env(env)
          dbp = 0;
          if (_dbname) dbname=_dbname;
          else dbname=DATABASE;
     ~DbHolder() {
     try {
          close();
     } catch (...) {
          // Ignore: this may mean another exception is pending
     bool ensure_open(bool creating) {
     if (dbp)
          return (true);
     dbp = new Db(env, 0);
     u_int32_t flags = DB_AUTO_COMMIT;
     if (creating)
          flags |= DB_CREATE;
     try {
          //dbp->open(NULL, DATABASE, NULL, DB_BTREE, flags, 0);
          //dbp->open(NULL, dbname, NULL, DB_BTREE, flags, 0);
          dbp->open(NULL, NULL, dbname, DB_BTREE, flags, 0);
          return (true);
     } catch (DbDeadlockException e) {
     } catch (DbRepHandleDeadException e) {
     } catch (DbException e) {
          if (e.get_errno() == DB_REP_LOCKOUT) {
          // Just fall through.
          } else if (e.get_errno() == ENOENT && !creating) {
          // Provide a bit of extra explanation.
          log("Stock DB does not yet exist");
          } else
          throw;
     // (All retryable errors fall through to here.)
     log("please retry the operation");
     close();
     return (false);
     void close() {
     if (dbp) {
          try {
          dbp->close(0);
          delete dbp;
          dbp = 0;
          } catch (...) {
          delete dbp;
          dbp = 0;
          throw;
     operator Db *() {
     return dbp;
     Db *operator->() {
     return dbp;
private:
     Db *dbp;
     DbEnv *env;
     const char *dbname;
class StringDbt : public Dbt {
public:
#define GET_STRING_OK 0
#define GET_STRING_INVALID_PARAM 1
#define GET_STRING_SMALL_BUFFER 2
#define GET_STRING_EMPTY_DATA 3
     int get_string(char **buf, size_t buf_len)
          size_t copy_len;
          int ret = GET_STRING_OK;
          if (buf == NULL) {
               cerr << "Invalid input buffer to get_string" << endl;
               return GET_STRING_INVALID_PARAM;
          // make sure the string is null terminated.
          memset(*buf, 0, buf_len);
          // if there is no string, just return.
          if (get_data() == NULL || get_size() == 0)
               return GET_STRING_OK;
          if (get_size() >= buf_len) {
               ret = GET_STRING_SMALL_BUFFER;
               copy_len = buf_len - 1; // save room for a terminator.
          } else
               copy_len = get_size();
          memcpy(*buf, get_data(), copy_len);
          return ret;
     size_t get_string_length()
          if (get_size() == 0)
               return 0;
          return strlen((char *)get_data());
     void set_string(char *string)
          set_data(string);
          set_size((u_int32_t)strlen(string));
     StringDbt(char *string) :
     Dbt(string, (u_int32_t)strlen(string)) {};
     StringDbt() : Dbt() {};
     ~StringDbt() {};
     // Don't add extra data to this sub-class since we want it to remain
     // compatible with Dbt objects created internally by Berkeley DB.
Db *g_repquote=NULL;
RepQuoteExample::RepQuoteExample() : app_config(0), cur_env(0) {
     app_data.app_finished = 0;
     app_data.in_client_sync = 0;
     app_data.is_master = 0; // assume I start out as client
     app_data.no_dummy_wr = 0 ; //prevent to run dummy write
int (*old_rep_process_message)
          __P((DB_ENV *, DBT *, DBT *, int, DB_LSN *));
int my_rep_process_message __P((DB_ENV arg1, DBT arg2, DBT arg3, int arg4, DB_LSN arg5))
     printf("EZ->>> my_rep_process_message:%p\n",arg5);
     old_rep_process_message(arg1,arg2,arg3,arg4,arg5);
void RepQuoteExample::init(RepConfigInfo *config) {
     app_config = config;
     cur_env.set_app_private(&app_data);
     cur_env.set_errfile(stderr);
     app_data.no_dummy_wr=config->no_dummy_wr;
     if (app_data.no_dummy_wr)
          printf("No dummy !!!\n");
     //EZ->cur_env.set_errpfx(progname);
     cur_env.set_event_notify(event_callback);
     // Configure bulk transfer to send groups of records to clients
     // in a single network transfer. This is useful for master sites
     // and clients participating in client-to-client synchronization.
     if (app_config->bulk)
          cur_env.rep_set_config(DB_REP_CONF_BULK, 1);
     // Set the total number of sites in the replication group.
     // This is used by repmgr internal election processing.
     if (app_config->totalsites > 0)
          cur_env.rep_set_nsites(app_config->totalsites);
     // Turn on debugging and informational output if requested.
     if (app_config->verbose)
          cur_env.set_verbose(DB_VERB_REPLICATION, 1);
     cur_env.set_verbose(DB_VERB_REPMGR_MISC, 1);
     cur_env.set_verbose(DB_VERB_RECOVERY, 1);
     cur_env.set_verbose(DB_VERB_REPLICATION, 1);
     cur_env.set_verbose(DB_VERB_REP_ELECT, 1);
     cur_env.set_verbose(DB_VERB_REP_LEASE, 1);
     cur_env.set_verbose(DB_VERB_REP_SYNC, 1);
     cur_env.set_verbose(DB_VERB_REPMGR_MISC, 1);
     // Set replication group election priority for this environment.
     // An election first selects the site with the most recent log
     // records as the new master. If multiple sites have the most
     // recent log records, the site with the highest priority value
     // is selected as master.
     cur_env.rep_set_priority(app_config->priority);
     // Set the policy that determines how master and client sites
     // handle acknowledgement of replication messages needed for
     // permanent records. The default policy of "quorum" requires only
     // a quorum of electable peers sufficient to ensure a permanent
     // record remains durable if an election is held. The "all" option
     // requires all clients to acknowledge a permanent replication
     // message instead.
     cur_env.repmgr_set_ack_policy(app_config->ack_policy);
     // Set the threshold for the minimum and maximum time the client
     // waits before requesting retransmission of a missing message.
     // Base these values on the performance and load characteristics
     // of the master and client host platforms as well as the round
     // trip message time.
     cur_env.rep_set_request(20000, 500000);
     // Configure deadlock detection to ensure that any deadlocks
     // are broken by having one of the conflicting lock requests
     // rejected. DB_LOCK_DEFAULT uses the lock policy specified
     // at environment creation time or DB_LOCK_RANDOM if none was
     // specified.
     cur_env.set_lk_detect(DB_LOCK_DEFAULT);
     // The following base replication features may also be useful to your
     // application. See Berkeley DB documentation for more details.
     // - Master leases: Provide stricter consistency for data reads
     // on a master site.
     // - Timeouts: Customize the amount of time Berkeley DB waits
     // for such things as an election to be concluded or a master
     // lease to be granted.
     // - Delayed client synchronization: Manage the master site's
     // resources by spreading out resource-intensive client
     // synchronizations.
     // - Blocked client operations: Return immediately with an error
     // instead of waiting indefinitely if a client operation is
     // blocked by an ongoing client synchronization.
     cur_env.repmgr_set_local_site(app_config->this_host.host,
     app_config->this_host.port, 0);
     for ( REP_HOST_INFO *cur = app_config->other_hosts; cur != NULL;
          cur = cur->next) {
          cur_env.repmgr_add_remote_site(cur->host, cur->port,
          NULL, cur->peer ? DB_REPMGR_PEER : 0);
     // Configure heartbeat timeouts so that repmgr monitors the
     // health of the TCP connection. Master sites broadcast a heartbeat
     // at the frequency specified by the DB_REP_HEARTBEAT_SEND timeout.
     // Client sites wait for message activity the length of the
     // DB_REP_HEARTBEAT_MONITOR timeout before concluding that the
     // connection to the master is lost. The DB_REP_HEARTBEAT_MONITOR
     // timeout should be longer than the DB_REP_HEARTBEAT_SEND timeout.
     cur_env.rep_set_timeout(DB_REP_HEARTBEAT_SEND, 5000000);
     cur_env.rep_set_timeout(DB_REP_HEARTBEAT_MONITOR, 10000000);
     // The following repmgr features may also be useful to your
     // application. See Berkeley DB documentation for more details.
     // - Two-site strict majority rule - In a two-site replication
     // group, require both sites to be available to elect a new
     // master.
     // - Timeouts - Customize the amount of time repmgr waits
     // for such things as waiting for acknowledgements or attempting
     // to reconnect to other sites.
     // - Site list - return a list of sites currently known to repmgr.
     // We can now open our environment, although we're not ready to
     // begin replicating. However, we want to have a dbenv around
     // so that we can send it into any of our message handlers.
     cur_env.set_cachesize(0, CACHESIZE, 0);
     cur_env.set_flags(DB_REP_PERMANENT, 1);
     //cur_env.set_flags(DB_TXN_WRITE_NOSYNC, 1);
/*     u_int32_t maxlocks=300000;
     if (maxlocks != 0)
          cur_env.set_lk_max_locks(maxlocks);
     u_int32_t maxlocks_o=300000;
     if (maxlocks_o != 0)
          cur_env.set_lk_max_objects(maxlocks_o);
     u_int32_t maxmutex=300000;
     if (maxmutex != 0)
          cur_env.mutex_set_max(maxmutex);
     DbEnv          *m_env=&cur_env;
     m_env->set_flags(DB_TXN_NOSYNC, 1);
     m_env->set_lk_max_lockers(60000);
     m_env->set_lk_max_objects(60000);
     m_env->set_lk_max_locks(60000);
     m_env->set_tx_max(60000);
     //m_env->repmgr_set_ack_policy(DB_REPMGR_ACKS_NONE);
     m_env->rep_set_timeout(DB_REP_ACK_TIMEOUT, 50 * 1000); //50ms
     m_env->rep_set_timeout(DB_REP_CHECKPOINT_DELAY, 0);
     //m_env->rep_set_timeout(DB_REP_CONNECTION_RETRY, 30 * 1000 * 1000); // 30 seconds
     m_env->rep_set_timeout(DB_REP_ELECTION_TIMEOUT, 1 * 1000 * 1000); // 5 seconds
     m_env->rep_set_timeout(DB_REP_FULL_ELECTION_TIMEOUT, 5 * 1000 * 1000); // 5 seconds
     m_env->rep_set_timeout(DB_REP_CONNECTION_RETRY, 5 * 1000 * 1000);
     //m_env->rep_set_timeout(DB_REP_ELECTION_RETRY, 10 * 1000 * 1000); //10 seconds
     //m_env->rep_set_timeout(DB_REP_HEARTBEAT_MONITOR, 80 * 1000 * 1000); //80 seconds
     //m_env->rep_set_timeout(DB_REP_HEARTBEAT_SEND, 500 * 1000); //500 milli seconds
     //The minimum number of microseconds a client waits before requesting retransmission
     u_int32_t rep_req_min = 40000; //40 000 microsec = 40 mili
     //The maximum number of microseconds a client waits before requesting retransmission
     u_int32_t rep_req_max = 1280000;// 1 280 000 microsec = 1.28 sec
     u_int32_t rep_limit_gbytes = 0;
     u_int32_t rep_limit_bytes = 100 * 1024 * 1024; // 100MB
     m_env->rep_set_request(rep_req_min, rep_req_max);
     m_env->rep_set_limit(rep_limit_gbytes, rep_limit_bytes);
     cur_env.open(app_config->home, DB_CREATE | DB_RECOVER |
     DB_THREAD | DB_INIT_REP | DB_INIT_LOCK | DB_INIT_LOG |
     DB_INIT_MPOOL | DB_INIT_TXN , 0);
     //keep old function for chain
     //old_rep_process_message=cur_env.get_DB_ENV()->rep_process_message;
     //derouting
     //cur_env.get_DB_ENV()->rep_process_message=my_rep_process_message;
     /*int _i;
     cur_env.log_get_config(DB_LOG_DIRECT, &_i);printf ("DB_LOG_DIRECT = %d\n",_i);
     cur_env.log_get_config(DB_LOG_DSYNC, &_i);printf ("DB_LOG_DSYNC = %d\n",_i);
     cur_env.log_get_config(DB_LOG_AUTO_REMOVE, &_i);printf ("DB_LOG_AUTO_REMOVE = %d\n",_i);
     cur_env.log_get_config(DB_LOG_IN_MEMORY, &_i);printf ("DB_LOG_IN_MEMORY = %d\n",_i);
     cur_env.log_get_config(DB_LOG_ZERO,&_i);printf ("DB_LOG_ZERO = %d\n",_i);
     // Start checkpoint and log archive support threads.
     (void)thread_create(&ckp_thr, NULL, checkpoint_thread, &cur_env);
     (void)thread_create(&lga_thr, NULL, log_archive_thread, &cur_env);
     (void)thread_create(&dmy_thr, NULL, dummy_write_thread, &cur_env);
     cur_env.repmgr_start(3, app_config->start_policy);
}

int RepQuoteExample::terminate() {
     try {
          // Wait for checkpoint and log archive threads to finish.
          // Windows does not allow NULL pointer for exit code variable.
          thread_exit_status_t exstat;
          (void)thread_join(lga_thr, &exstat);
          (void)thread_join(ckp_thr, &exstat);
          (void)thread_join(dmy_thr, &exstat);
          // We have used the DB_TXN_NOSYNC environment flag for
          // improved performance without the usual sacrifice of
          // transactional durability, as discussed in the
          // "Transactional guarantees" page of the Reference
          // Guide: if one replication site crashes, we can
          // expect the data to exist at another site. However,
          // in case we shut down all sites gracefully, we push
          // out the end of the log here so that the most
          // recent transactions don't mysteriously disappear.
          cur_env.log_flush(NULL);
          cur_env.close(0);
     } catch (DbException dbe) {
          cout << "error closing environment: " << dbe.what() << endl;
     return 0;
void RepQuoteExample::prompt() {
     cout << "QUOTESERVER";
     if (!app_data.is_master)
          cout << "(read-only)";
     cout << "> " << flush;
void log(const char *msg) {
time_t currentTime;
// get and print the current time
time (&currentTime); // fill now with the current time
     char buff[255];
     strncpy(buff,ctime(&currentTime),sizeof(buff));
     char *p;
     for(p =buff ; *p != '\n'; p++);
     *p = '\0';
     cerr << buff << " - " << msg << endl;
// Simple command-line user interface:
// - enter "<stock symbol> <price>" to insert or update a record in the
//     database;
// - just press Return (i.e., blank input line) to print out the contents of
//     the database;
// - enter "quit" or "exit" to quit.
void RepQuoteExample::doloop() {
     DbHolder dbh1(&cur_env,DATABASE);
     DbHolder dbh2(&cur_env,DATABASE2);
     DbHolder *dbh=&dbh1;
     DbTxn *txn;
     string input;
bool truncate = false;
     char *c;
     using_history();
     g_repquote=*dbh;
     int loop_rate = 0;
     int txn_rate = 500;
     while (prompt(), /*getline(cin, input)*/c=readline(NULL)) {
          input=std::string(c);
          add_history(c);
          free(c);
          int start_loop = 0;
          int end_loop = 0;
          int start_loop_d = 0;
          int end_loop_d = 0;
          istringstream is(input);
          string token1, token2, token3;
truncate = false;
start_loop = 0;
end_loop = 0;
          // Read 0, 1 or 2 tokens from the input.
          int count = 0;
          if (is >> token1) {
               count++;
               if (is >> token2)
               count++;
               if (is >> token3)
               count++;
          if (count == 1) {
     if (token1 == "truncate" ) {
                    truncate = true;
               else if (token1 == "env" ){
                    print_env(&cur_env);
                    continue;
     else if (token1 == "verbose" ) {
                    app_config->verbose = !app_config->verbose;
                    if (app_config->verbose)
                         cur_env.set_verbose(DB_VERB_REPLICATION, 1);
                         cur_env.set_verbose(DB_VERB_REPMGR_MISC, 1);
                         cur_env.set_verbose(DB_VERB_RECOVERY, 1);
                         cur_env.set_verbose(DB_VERB_REP_ELECT, 1);
                         cur_env.set_verbose(DB_VERB_REP_LEASE, 1);
                         cur_env.set_verbose(DB_VERB_REP_SYNC, 1);
                         cur_env.set_verbose(DB_VERB_REPMGR_MISC, 1);
                         log("verbose is on");
                    else
                         cur_env.set_verbose(DB_VERB_REPLICATION, 0);
                         cur_env.set_verbose(DB_VERB_REPMGR_MISC, 0);
                         cur_env.set_verbose(DB_VERB_RECOVERY, 0);
                         cur_env.set_verbose(DB_VERB_REP_ELECT, 0);
                         cur_env.set_verbose(DB_VERB_REP_LEASE, 0);
                         cur_env.set_verbose(DB_VERB_REP_SYNC, 0);
                         cur_env.set_verbose(DB_VERB_REPMGR_MISC, 0);
                         log("verbose is off");
                    continue;
     else if (token1 == "print" ) {
               print_stocks(*dbh);
                    count = 0;
     else if (token1 == "db1" ) {
                    dbh=&dbh1;
                    g_repquote=*dbh;
                    log( "switch to Db1");
                    count = 0;
     else if (token1 == "db2" ) {
                    dbh=&dbh2;
                    g_repquote=*dbh;
                    log( "switch to Db2");
                    count = 0;
               else if (token1 == "exit" || token1 == "quit") {
                    app_data.app_finished = 1;
                    break;
               } else {
                    log("Format: <stock> <price>");
                    continue;
else if (count == 2)
               if (token1 == "loop_rate" ){
     loop_rate = atoi(token2.c_str());
                    continue;
               if (token1 == "txn_rate" ){
     txn_rate = atoi(token2.c_str());
                    continue;
else if (count == 3)
if (token1 == "loop" ) {
start_loop = atoi(token2.c_str());
end_loop = start_loop + atoi(token3.c_str());
if (token1 == "delete" ) {
start_loop_d = atoi(token2.c_str());
end_loop_d = start_loop_d + atoi(token3.c_str());
          // Here we know count is either 0 or 2, so we're about to try a
          // DB operation.
          // Open database with DB_CREATE only if this is a master
          // database. A client database uses polling to attempt
          // to open the database without DB_CREATE until it is
          // successful.
          // This DB_CREATE polling logic can be simplified under
          // some circumstances. For example, if the application can
          // be sure a database is already there, it would never need
          // to open it with DB_CREATE.
          if (!dbh->ensure_open(app_data.is_master))
               continue;
          try {
               if (count == 0)
                    if (app_data.in_client_sync)
                         log( "Cannot read data during client initialization - please try again.");
                    else
                         print_stocks_size(*dbh);
               else if (!app_data.is_master)
                    log("Can't update at client");
               else {
                    if (truncate)
u_int32_t no_remove;
                    txn = NULL;
cur_env.txn_begin(NULL, &txn, DB_TXN_NOWAIT);
                         try
          (*dbh)->truncate(txn, &no_remove, 0);
// commit
txn->commit(0);
txn = NULL;
} catch (DbException &e) {
std::cout << "Error on txn commit: " << e.what() << std::endl;
                    //     } catch (DbDeadlockException &) {
                    if (txn != NULL)
                         (void)txn->abort();
// std::cout << "Error on txn commit: " << std::endl;
else if (start_loop)
int j=0;
for (int i=start_loop; i<=end_loop; i=i+txn_rate)
//transaction begin
               txn = NULL;
               cur_env.txn_begin(NULL, &txn, 0);
for (j=i; j<=end_loop && j<=(i+txn_rate); j++)
                              Dbt key, value;
     std::string key1, value1;
     std::stringstream sstrm;
     sstrm << "key" << j << ends;
     key1 = sstrm.str();
               key.set_data((void *)key1.c_str());
               key.set_size((u_int32_t)strlen(key1.c_str()));
     sstrm.str("");
     int payload = rand() + j;
                              sstrm << "price" << payload << ends;
     value1 = sstrm.str();
               value.set_data((void *)value1.c_str());
               value.set_size((u_int32_t)strlen(value1.c_str()));
     // Perform the database put
     (*dbh)->put(txn, &key, &value, 0);
                         printf("Kill me !!\n");
                         kill(getpid(),-9);
                         exit(0);
     try
                              // commit
                    txn->commit(0);
                    txn = NULL;
               } catch (DbException &e) {
                    std::cout << "Error on txn commit: " << e.what() << std::endl;
                         if (loop_rate>0)
                              usleep(txn_rate * 1000 * 1000 / loop_rate);
                    else if (start_loop_d)
int j=0;
for (int i=start_loop_d; i<=end_loop_d; i=i+100)
//transaction begin
               txn = NULL;
               cur_env.txn_begin(NULL, &txn, 0);
for (j=i; j<=end_loop_d && j<=(i+100); j++)
                              Dbt key, value;
     std::string key1, value1;
     std::stringstream sstrm;
     sstrm << "key" << j << ends;
     key1 = sstrm.str();
               key.set_data((void *)key1.c_str());
               key.set_size((u_int32_t)strlen(key1.c_str()));
     // Perform the database put
     (*dbh)->del(txn, &key, 0);
     try
                              // commit
                    txn->commit(0);
                    txn = NULL;
               } catch (DbException &e) {
                    std::cout << "Error on txn commit: " << e.what() << std::endl;
                    else
                         const char *symbol = token1.c_str();
                         StringDbt key(const_cast<char*>(symbol));
                         const char *price = token2.c_str();
                         StringDbt data(const_cast<char*>(price));
                         (*dbh)->put(NULL, &key, &data, 0);
          } catch (DbDeadlockException e) {
               log("please retry the operation");
               dbh->close();
          } catch (DbRepHandleDeadException e) {
               log("please retry the operation");
               dbh->close();
          } catch (DbException e) {
               if (e.get_errno() == DB_REP_LOCKOUT) {
               log("please retry the operation");
               dbh->close();
               } else
               throw;
     dbh->close();
void RepQuoteExample::event_callback(DbEnv* dbenv, u_int32_t which, void *info)
     static char buf[256];
     APP_DATA app = (APP_DATA)dbenv->get_app_private();
     info = NULL;          /* Currently unused. */
     switch (which) {
     case DB_EVENT_REP_CLIENT:
          app->is_master = 0;
          app->in_client_sync = 1;
          sprintf(buf,"%s - %s",progname,"CLIENT");
          //EZ->dbenv->set_errpfx(buf);
          log("DB_EVENT_REP_CLIENT.");
          break;
     case DB_EVENT_REP_MASTER:
          app->is_master = 1;
          app->in_client_sync = 0;
          sprintf(buf,"%s - %s",progname,"MASTER");
          //EZ->dbenv->set_errpfx(buf);
          log("DB_EVENT_REP_MASTER.");
          break;
     case DB_EVENT_REP_NEWMASTER:
          log("DB_EVENT_REP_NEWMASTER.");
          app->in_client_sync = 1;
          break;
     case DB_EVENT_REP_PERM_FAILED:
          // Did not get enough acks to guarantee transaction
          // durability based on the configured ack policy. This
          // transaction will be flushed to the master site's
          // local disk storage for durability.
          log("DB_EVENT_REP_PERM_FAILED.");
          log("Insufficient acknowledgements to guarantee transaction durability.");
          break;
     case DB_EVENT_REP_STARTUPDONE:
          app->in_client_sync = 0;
          log("DB_EVENT_REP_STARTUPDONE.");
          break;
     case DB_EVENT_REP_ELECTION_FAILED:
          log("DB_EVENT_REP_ELECTION_FAILED.");
          //g_runner->init(g_config);
          printf("Kill me !!\n");
          kill(getpid(),-9);
          exit(0);
          break;
     case DB_EVENT_REP_DUPMASTER:
          log("DB_EVENT_REP_DUPMASTER.");
          break;
     default:
          dbenv->errx("ignoring event %d", which);
void RepQuoteExample::print_stocks_size(Db *dbp) {
     DB_BTREE_STAT *statp;
dbp->stat(NULL, &statp, 0);
     log("db_stat");
cout << "***************************************** >>>>>>>>>>> : database contains " << (u_long)statp->bt_ndata << " records\n";
void RepQuoteExample::print_env(DbEnv *dbenv) {
     dbenv->stat_print(DB_STAT_ALL);
void RepQuoteExample::print_stocks(Db *dbp) {
     StringDbt key, data;
#define     MAXKEYSIZE     10
#define     MAXDATASIZE     20
     char keybuf[MAXKEYSIZE + 1], databuf[MAXDATASIZE + 1];
     char kbuf, dbuf;
     memset(&key, 0, sizeof(key));
     memset(&data, 0, sizeof(data));
     kbuf = keybuf;
     dbuf = databuf;
     DbcAuto dbc(dbp, 0, 0);
     cout << "\tSymbol\tPrice" << endl
          << "\t======\t=====" << endl;
int no_records =0;
     for (int ret = dbc->get(&key, &data, DB_FIRST);
          ret == 0;
          ret = dbc->get(&key, &data, DB_NEXT)) {
          key.get_string(&kbuf, MAXKEYSIZE);
          data.get_string(&dbuf, MAXDATASIZE);
no_records++;
          cout << "\t" << keybuf << "\t" << databuf << endl;
cout << "********************** NO Records " << no_records << endl;
     cout << endl << flush;
     dbc.close();
static void usage() {
     cerr << "usage: " << progname << " -h home -l host:port [-CM]"
     << "[-r host:port][-R host:port]" << endl
     << " [-a all|quorum][-b][-n nsites][-p priority][-v]" << endl;
     cerr << "\t -h home (required; h stands for home directory)" << endl
     << "\t -l host:port (required; l stands for local)" << endl
     << "\t -C or -M (optional; start up as client or master)" << endl
     << "\t -r host:port (optional; r stands for remote; any "
     << "number of these" << endl
     << "\t may be specified)" << endl
     << "\t -R host:port (optional; R stands for remote peer; only "
     << "one of" << endl
     << "\t these may be specified)" << endl
     << "\t -a all|quorum (optional; a stands for ack policy)" << endl
     << "\t -b (optional; b stands for bulk)" << endl
     << "\t -n nsites (optional; number of sites in replication "
     << "group; defaults " << endl
     << "\t     to 0 to try to dynamically compute nsites)" << endl
     << "\t -p priority (optional; defaults to 100)" << endl
     << "\t -v (optional; v stands for verbose)" << endl;
     exit(EXIT_FAILURE);
int main(int argc, char **argv) {
     RepConfigInfo config;
     char ch, portstr, tmphost;
     int tmpport;
     bool tmppeer;
     config.no_dummy_wr = false;
     // Extract the command line parameters
     while ((ch = getopt(argc, argv, "E:a:bCh:l:Mn:p:R:r:vw")) != EOF) {
          tmppeer = false;
          switch (ch) {
          case 'a':
               if (strncmp(optarg, "all", 3) == 0)
                    config.ack_policy = DB_REPMGR_ACKS_ALL;
               else if (strncmp(optarg, "quorum", 6) != 0)
                    usage();
               break;
          case 'b':
               config.bulk = true;
               break;
          case 'C':
               config.start_policy = DB_REP_CLIENT;
               break;
          case 'E':
config.start_policy = DB_REP_ELECTION;
break;
          case 'h':
               config.home = optarg;
               break;
          case 'l':
               config.this_host.host = strtok(optarg, ":");
               if ((portstr = strtok(NULL, ":")) == NULL) {
                    cerr << "Bad host specification." << endl;
                    usage();
               config.this_host.port = (unsigned short)atoi(portstr);
               config.got_listen_address = true;
               break;
          case 'M':
               config.start_policy = DB_REP_MASTER;
               break;
          case 'n':
               config.totalsites = atoi(optarg);
               break;
          case 'p':
               config.priority = atoi(optarg);
               break;
          case 'R':
               tmppeer = true; // FALLTHROUGH
          case 'r':
               tmphost = strtok(optarg, ":");
               if ((portstr = strtok(NULL, ":")) == NULL) {
                    cerr << "Bad host specification." << endl;
                    usage();
               tmpport = (unsigned short)atoi(portstr);
               config.addOtherHost(tmphost, tmpport, tmppeer);
               break;
          case 'v':
               config.verbose = true;
               break;
          case 'w':
               config.no_dummy_wr = true;
               //config.priority = 2;
               break;
          case '?':
          default:
               usage();
     // Error check command line.
     if ((!config.got_listen_address) || config.home == NULL)
          usage();
     RepQuoteExample runner;
     g_runner=&runner;
     g_config=&config;
     try {
          runner.init(&config);
          runner.doloop();
     } catch (DbException dbe) {
          cerr << "Caught an exception during initialization or"
               << " processing: " << dbe.what() << endl;
     runner.terminate();
     return 0;
// This is a very simple thread that performs checkpoints at a fixed
// time interval. For a master site, the time interval is one minute
// plus the duration of the checkpoint_delay timeout (30 seconds by
// default.) For a client site, the time interval is one minute.
void checkpoint_thread(void args)
     DbEnv *env;
     APP_DATA *app;
     int i, ret;
     env = (DbEnv *)args;
     app = (APP_DATA *)env->get_app_private();
     for (;;) {
          // Wait for one minute, polling once per second to see if
          // application has finished. When application has finished,
          // terminate this thread.
          for (i = 0; i < 60; i++) {
               sleep(1);
               if (app->app_finished == 1)
                    return ((void *)EXIT_SUCCESS);
          // Perform a checkpoint.
          // original line
          if ((ret = env->txn_checkpoint(0, 0, 0)) != 0) {
          //if ((ret = env->txn_checkpoint(0, 0, DB_FORCE)) != 0) {
               env->err(ret, "Could not perform checkpoint.\n");
               return ((void *)EXIT_FAILURE);
// This is a simple log archive thread. Once per minute, it removes all but
// the most recent 3 logs that are safe to remove according to a call to
// DBENV->log_archive().
// Log cleanup is needed to conserve disk space, but aggressive log cleanup
// can cause more frequent client initializations if a client lags too far
// behind the current master. This can happen in the event of a slow client,
// a network partition, or a new master that has not kept as many logs as the
// previous master.
// The approach in this routine balances the need to mitigate against a
// lagging client by keeping a few more of the most recent unneeded logs
// with the need to conserve disk space by regularly cleaning up log files.
// Use of automatic log removal (DBENV->log_set_config() DB_LOG_AUTO_REMOVE
// flag) is not recommended for replication due to the risk of frequent
// client initializations.
void log_archive_thread(void args)
     DbEnv *env;
     APP_DATA *app;
     char **begin, **list;
     int i, listlen, logs_to_keep, minlog, ret;
     env = (DbEnv *)args;
     app = (APP_DATA *)env->get_app_private();
     logs_to_keep = 3;
     for (;;) {
          // Wait for one minute, polling once per second to see if
          // application has finished. When application has finished,
          // terminate this thread.
          for (i = 0; i < 60; i++) {
               sleep(1);
               if (app->app_finished == 1)
                    return ((void *)EXIT_SUCCESS);
          // Get the list of unneeded log files.
          if ((ret = env->log_archive(&list, DB_ARCH_ABS)) != 0) {
               env->err(ret, "Could not get log archive list.");
               return ((void *)EXIT_FAILURE);
          if (list != NULL) {
               listlen = 0;
               // Get the number of logs in the list.
               for (begin = list; *begin != NULL; begin++, listlen++);
               // Remove all but the logs_to_keep most recent
               // unneeded log files.
               minlog = listlen - logs_to_keep;
               for (begin = list, i= 0; i < minlog; list++, i++) {
                    if ((ret = unlink(*list)) != 0) {
                         env->err(ret,
                         "logclean: remove %s", *list);
                         env->errx(
                         "logclean: Error remove %s", *list);
                         free(begin);
                         return ((void *)EXIT_FAILURE);
               free(begin);
#define DATABASE_DUMMY "dummy.db"
void create_dummy_db(DB_ENV env, DB *dbp)
DB_ENV *dbenv=env;
int ret;
u_int32_t db_flags;
if ((ret = db_create(dbp, dbenv, 0)) != 0)
dbenv->err(dbenv, ret, "create_dummy_db: db_create");
db_flags = DB_AUTO_COMMIT | DB_CREATE;
//if ((ret = (*dbp)->open(*dbp,NULL, DATABASE, NULL, DB_BTREE, db_flags, 0)) != 0)
if ((ret = (*dbp)->open(*dbp,NULL, NULL, DATABASE_DUMMY, DB_BTREE, db_flags, 0)) != 0)
dbenv->err(dbenv, ret, "create_dummy_db: DB->open");
void reopen_dummy_db(DB_ENV env, DB *dbp)
DB_ENV *dbenv=env;
int ret;
u_int32_t db_flags;
if ((ret = db_create(dbp, dbenv, 0)) != 0)
dbenv->err(dbenv, ret, "create_dummy_db: db_create");
db_flags = DB_AUTO_COMMIT | DB_CREATE;
//if ((ret = (*dbp)->open(*dbp,NULL, DATABASE, NULL, DB_BTREE, db_flags, 0)) != 0)
if ((ret = (*dbp)->open(*dbp,NULL, NULL, DATABASE_DUMMY, DB_BTREE, db_flags, 0)) != 0)
dbenv->err(dbenv, ret, "reopen_dummy_db: DB->open");
void perform_db_operation(DB_ENV env, DB *dbp, bool bRead)
//main loop
//DB *dbp=NULL;
DB_ENV *dbenv=env;
int ret;
u_int32_t db_flags;
DBT key, data;
char buf[20]="dummy", *rbuf;
rbuf=buf;
if (*dbp == NULL)
create_dummy_db(dbenv, dbp);
if (! bRead)
     memset(&key, 0, sizeof(key));
     memset(&data, 0, sizeof(data));
     key.data = buf;
     key.size = (u_int32_t)strlen(buf);
     data.data = rbuf;
     data.size = (u_int32_t)strlen(rbuf);
     if ((ret = (*dbp)->put(*dbp, NULL, &key, &data, 0)) != 0)
          if (ret == DB_REP_HANDLE_DEAD)
               //create_dummy_db(dbenv, dbp);
               reopen_dummy_db(dbenv, dbp);
               (*dbp)->err(*dbp, ret, "DB->put :");
          else
          if (ret != DB_KEYEXIST)
               (*dbp)->err(*dbp, ret, "perform_db_operation: DB->put");
     else
          DB_BTREE_STAT *statp;
          (*dbp)->stat(*dbp,NULL, &statp, 0);
          std::cout<<"dbp read stats: key#"<< statp->bt_nkeys <<std::endl;
void dummy_write_thread(void args)
     DbEnv *env;
     APP_DATA *app;
     char **begin, **list;
     int i, listlen, logs_to_keep, minlog, ret;
     DB *m_dbp; // a pointer
     env = (DbEnv *)args;
     app = (APP_DATA *)env->get_app_private();
     logs_to_keep = 3;
     for (;;) {
          if (! app->no_dummy_wr)
               if (app->is_master)
               perform_db_operation(env->get_DB_ENV(),&m_dbp,false);
                    //env->txn_checkpoint(0, 0, DB_FORCE);
          usleep(1 * 1000 * 1000);
          else
               if (app->is_master)
                    //DB *db_quote=g_repquote->get_DB();
                    //perform_db_operation(env->get_DB_ENV(),&db_quote,true);
                    //if (g_repquote)
                    //     g_runner->print_stocks_size(g_repquote);
                    //env->txn_checkpoint(0, 0, DB_FORCE);
                    //perform_db_operation(env->get_DB_ENV(),&m_dbp,false);
                    env->rep_flush();
          usleep(4 * 1000 * 1000);
my script to simulate the split brain
#!/bin/sh
[ -z "$node1" ] && node1=10.10.32.121
[ -z "$node2" ] && node2=10.10.32.91
trap myend 0 1 2 3 6 9 14 15
myend()
     echo "Receive signal to stop test..."
     un_split_brain
     echo "done"
     exit 1
split_brain()
     echo -n "Split-Brain at node $node..."
     snmpset -m ALL -v 2c -c svil 10.10.0.100 ifAdminStatus.41 i 2 >/dev/null 2>&1
     echo "done"
un_split_brain()
     echo -n "Undo Split-Brain at node $node..."
     snmpset -m ALL -v 2c -c svil 10.10.0.100 ifAdminStatus.41 i 1 >/dev/null 2>&1
     echo "done"
is_slave()
     local r=$(ssh root@$1 "tail -2 /tmp/BDB.log" | grep -c CLIENT)
     [ $r -gt 1 ] && ret=1 || ret=0
     return $ret
is_master()
     local r=$(ssh root@$1 "tail -2 /tmp/BDB.log" | grep -c MASTER)
     [ $r -gt 1 ] && ret=1 || ret=0
     return $ret
wait_for_master()
     echo -n "Waiting for MASTER at node $node ... "
     is_master $node
     r=$?
     while ( [ ! $r -eq 1 ] )
     do
     usleep 500000
     is_master $node
     r=$?
     echo -n "."
     done
     echo "done"
wait_for_slave()
     local r
     local tm
     tm=0
     echo -n "Waiting for SLAVE at node $node ... "
     is_slave $node
     r=$?
     while ( [ ! $r -eq 1 ] )
     do
          usleep 500000
          is_slave $node
          r=$?
          echo -n "."
          tm=$((tm+1))
          [ $tm -gt 120 ] && break
     done
     [ $tm -gt 120 ] && ret=0 || ret=1
     echo "done"
     return $ret
run_test_split_brain()
     local nt
     nt=1
     nfails=0
     x=4
     [ -z "$1" ] && node=$node2
     while ((1))
     do
          printf "*************** TEST [%02d] ********************\n" $nt
          split_brain
          wait_for_master
          x=$((RANDOM%9))
          echo -n " waiting $x sec ..."
          sleep $x
          echo "done"
          un_split_brain
          wait_for_slave
          r=$?
          [ ! $r -eq 1 ] && echo "`date` - test [$nt] - fails ..." || echo "`date` - test [$nt] - OK ."
          [ ! $r -eq 1 ] && nfails=$((nfails+1))
          perc_failure=$(echo "100.0 - $nfails / $nt * 100.0" | bc -l)
          echo "************************************************ [% Success test $perc_failure % ]"
          nt=$((nt+1))
          x=$((RANDOM%9))
          echo -n " waiting $x sec ..."
          sleep $x
     done
run_test_split_brain
here is the makefile to run to two environments
i run:
- make run
and in another window sh test_split_brain.sh
node1?=10.10.32.121
node2?=10.10.32.91
nsite?=2
debug?=0
all: RepQuoteExampleEric install
RepConfigInfo.o: RepConfigInfo.cpp RepConfigInfo.h
     g++ -I/usr/local/BerkeleyDB.5.1/include/ -g -O0 -c RepConfigInfo.cpp -o RepConfigInfo.o
RepQuoteExampleEric: RepQuoteExampleEric.cpp RepConfigInfo.o
     g++ -I/usr/local/BerkeleyDB.5.1/include/ -g -O0 RepQuoteExampleEric.cpp RepConfigInfo.o -o RepQuoteExampleEric -L /usr/local/BerkeleyDB.5.1/lib/ -lreadline -lcurses -ldb_cxx
kill:
     -ssh -X root@$(node1) "killall -9 /root/RepQuoteExampleEric"
     -ssh -X root@$(node2) "killall -9 /root/RepQuoteExampleEric"
run: RepQuoteExampleEric kill install clean_env
     ssh -X root@$(node1) "xterm -geom 100x20+100+100 -e \"LD_LIBRARY_PATH=/usr/local/BerkeleyDB.5.1/lib/ /root/RepQuoteExampleEric -h /opt/bdb/ -l 2.0.0.110:12345 -r 2.0.0.210:12345 -a quorum -b -n $(nsite) -v | tee /tmp/BDB.log\"" &
     ssh -X root@$(node2) "xterm -geom 100x20+800+100 -e \"LD_LIBRARY_PATH=/usr/local/BerkeleyDB.5.1/lib/ /root/RepQuoteExampleEric -h /opt/bdb/ -l 2.0.0.210:12345 -r 2.0.0.110:12345 -a quorum -b -n $(nsite) -v -w | tee /tmp/BDB.log\"" &
run_node2: clean_env2
     ssh -X root@$(node2) "xterm -geom 100x20+800+100 -e \"LD_LIBRARY_PATH=/usr/local/BerkeleyDB.5.1/lib/ /root/RepQuoteExampleEric -h /opt/bdb/ -l 2.0.0.210:12345 -r 2.0.0.110:12345 -a quorum -b -n $(nsite) -v -w | tee /tmp/BDB.log\"" &
debug_node2: clean_env2
     ssh -X root@$(node2) "xterm -geom 100x20+800+100 -e \"LD_LIBRARY_PATH=/usr/local/BerkeleyDB.5.1/lib/ /root/RepQuoteExampleEric -h /opt/bdb/ -l 2.0.0.210:12345 -r 2.0.0.110:12345 -a quorum -b -n $(nsite) -v -w | tee /tmp/BDB.log\"" &
     sleep 3
     ssh -X root@$(node2) /sbin/pidof RepQuoteExampleEric >/tmp/pid
     ssh -X root@$(node2) ~/kdbg /root/db-5.1.19/examples/cxx/excxx_repquote/RepQuoteExampleEric -p `cat /tmp/pid`
run_debug_node1: RepQuoteExampleEric kill install clean_env
     ssh -X root@$(node1) "xterm -geom 100x20+100+100 -e \"LD_LIBRARY_PATH=/usr/local/BerkeleyDB.5.1/lib/ /root/kdbg /root/RepQuoteExampleEric\" " &
     ssh -X root@$(node2) "xterm -geom 100x20+800+100 -e \"LD_LIBRARY_PATH=/usr/local/BerkeleyDB.5.1/lib/ /root/RepQuoteExampleEric -h /opt/bdb/ -l 2.0.0.210:12345 -r 2.0.0.110:12345 -a quorum -b -n $(nsite) -v\"" &
run_debug_node2: RepQuoteExampleEric kill install clean_env
     ssh -X root@$(node1) "xterm -geom 100x20+100+100 -e \"LD_LIBRARY_PATH=/usr/local/BerkeleyDB.5.1/lib/ /root/RepQuoteExampleEric -h /opt/bdb/ -l 2.0.0.110:12345 -r 2.0.0.210:12345 -a quorum -b -n $(nsite) -v\" " &
     ssh -X root@$(node2) "xterm -geom 100x20+800+100 -e \"LD_LIBRARY_PATH=/usr/local/BerkeleyDB.5.1/lib/ /root/kdbg /root/RepQuoteExampleEric\"" &
install: RepQuoteExampleEric
     scp RepQuoteExampleEric root@$(node1):~
     scp RepQuoteExampleEric root@$(node2):~
clean_env: clean_env1 clean_env2
clean_env1:
     ssh -X root@$(node1) rm -rf /opt/bdb/*
clean_env2:
     ssh -X root@$(node2) rm -rf /opt/bdb/*

Muse (2014.3) no more transparency working in Safari (8.0.4)

Hello, since the last update of Muse (2014.3) there is no more transparency working in Safari (8.0.4).
In Muse it looks like ever, but If I take a look of the site in Safari, there is no transparency on any pictures. So it is not possible to read the text.
This is really bad and I need a solution as soon as possible!!
What can I do?
Mac OS 10.10.2
Muse 2014.3
Safari 8.0.4
Hallo,
seit dem letzten Update von Muse habe ich keine Transparenzen mehr auf meinen Bildern! In Muse selbst ist alles wie immer, jedoch wenn ich die Site im Browser lade, werden keinerlei Transparenzen mehr angezeigt. Das ist gelinde gesagt ziemlich schlecht, da meine Texte nicht mehr lesbar sind und das Design der Seite enorm darunter leidet.
Hat jemand von diesem Bug schon gehört und irgendwelche Lösungsvorschläge? Danke

Please provide site url where the opacity does not work, also add more details such as which page and page section.
Screenshots will help.
Thanks,
Sanjit

Unable to Activate Screen Buttons on Secure Web Sites with Safari 5.0.2

I often pay bills online with secure sites, but today I was unable to complete any of those actions. The problem was that I could not produce the desired action when I clicked on action buttons (associated with secure emails in a list), such as SEND or REPLY. The problem was highlighted by red text notes telling me I should have used the onscreen buttons rather than my browser's arrow keys. Obviously, that's exactly what I was doing. It never cleared itself, even with a Reset Safari or Empty Cache. I did not have any of these problems before the recent upgrade to Safari 5.0.2.
Message was edited by: Bronco 01

That certainly could be true,...I guess. I did use Firefox 3.6.10 to accomplish what I needed with these secure sites without experiencing any of the same problems. So, it almost sounds like you have to *drink the kool aid* to believe it is the web sites themselves. I had this problem with more than one web site; as, I was in the process of paying four monthly bills online on different web sites. At least three of them were secure sites, and Safari would not work on any of the three web sites...I am pretty sure they were the secure ones. It also appears possible that to the degree that Safari is NOT standards-compliant, some fault in systems engineering might be preventing its ability to work with secure sites. I did encourage, through an independent email, one web master to investigate with Apple why his web site/Safari interface was not working. So, he might take you up on your advice to become more standards-compliant if it applies. I'm still in need of a fix that I can really use.
Message was edited by: Bronco 01

Muse do not allow to public site with my host's e-mail on contact form: info@теле.онлайн. Help!

Hello, staff!
My site (http://теле.онлайн) have a contact form and i can't public site even on bys.catalist by using e-mail for sending form by my host-provider: info@теле.онлайн. If i use another one, for example my own - [email protected] - it is ok on bys.catalist, but it not working on my host, becouse the terns only allow to use their e-mail - info@теле.онлайн.
So, what we got now if i try to use info@теле.онлайн:
Can't public site on buisness catalist servise with that mistake - 400 bad gateway. (117007);
if i export site as HTML and load it to my host by using FileZilla - forms don't work with that message: theres mistake on server.
I've contacted with my host-provider and they say that only info@теле.онлайн are allowed to be used in form.
So now i need to know - is that possible to configure Muse with that e-mail?
What if not? I have a contract with Adobe for 1 year, what should i do now?
PS sorry for my english it's pure, but i'm trying my best

Create a New User Account, and as that New User try to set up this one account -- as it is POP, set to leave messages on the server after download. If not familiar with setting up a New User Account, see:
http://docs.info.apple.com/article.html?path=Mac/10.5/en/8235.html
This will be a useful test, and is not meant to suggest a permanent switch to the New User Account, but rather a test of the Mail application outside of your normal User Account.
Also in System Preferences/Networks click on Advanced, then Proxies and make sure no proxy selections have been checked.
Ernie
Message was edited by: Ernie Stamper

Strange problem after installation of bootcamp with windows 7 on Imac i5 27

After installed Windows 7 (Single partitions Leopard Snow and Windows works very fine) i have a bootloader problem with the option key at startup of the machine.
If i hold option for a little time i don't see any icon, only a gray display. Only if I hold down the option key for about two minutes icons appears correctly.
The problem not exist if i install rEFi, bootloader, it start very fast and all work fine. Any ideas?

Hi,
This is Oracle Database Express Edition (XE) forum.
If you like use APEX listener and have problem with that here is link to correct forum.
ORDS, SODA & JSON in the Database
If you like use EPG see configuration steps from APEX install instructions
http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21673/otn_install.htm#CBHBCBBJ
Regards,
Jari
My Blog: http://dbswh.webhop.net/dbswh/f?p=BLOG:HOME:0
Twitter: http://www.twitter.com/jariolai

Image size problem after converting from Managed files to Referenced files.

I recently moved to Referenced files for all my images. I use a plug-in (Graphic Converter 8.8.2) to resize all images to a consistent size (1440 pixels wide, landsacpe format) for a web app that I use (Sandvox). With Referenced files, when I drag and drop the externally processed image, it shows up at exactly one-half the correct size (720 pixels). As a test, doing exactly the same opeartion with an Aperture library utilizing managed files, there is no problem...it works as expected.
As a temproray work-around, I found that instead of dragging and dropping, I use the Aperture Export function, everything is correct. This is not really what I want to do because I have a lot of images to process.
This is Aperture 3.5 and Mavericks, but the problem was there with with Aperture 3.4 and OS 10.7.5.

Thank you for the suggestion and running the test. I changed the Preview settings to 1440, and then 2560 and finally, Don't Limit. Quit and relaunch Aperture between each setting. No luck.
But you gave me a hint: maybe the problem has to do with the images being first Managed and then moved to Referenced files. So I tried one that has never been a Managed file and everything works correctly! Don't know if this is a bug or a feature.
Mystery solved, but I still have a lot of images to reprocess.
Thank you for the help.

After viewing a site with a flash window in it, the next site shows a blank rectangle where the flash window of the previous site was. This persists through all subsequent sites. How can I eliminate this flash window persistence?

using the latest Firefox Beta, after opening Shambhala.org site, the flash window shows up as a blank rectangle on subsequent sites. I am using Mac OSX 10.6 Snow Leopard. The only way I can get rid of the blank rectangle is to restart Firefox.

That sounds like a known problem on OS X. From the known issues section of the [http://www.mozilla.com/en-US/firefox/4.0b5/releasenotes/ Firefox 4 Beta 5 Release Notes]
"Plugin content can be rendered incorrectly leaving blank white squares over web content. Scrolling or switching tabs will often fix the problem, although sometimes you must close the tab which contains that plugin content (see [https://bugzilla.mozilla.org/show_bug.cgi?id=592453 bug 592453])"
This should be fixed in the next beta.

Sound Problems after converting

I converted all my video files from Quicktime to MPEG-4 so that the videos would play on my iPod. The videos now play, but there is no sound. How can i get sound to play?

Hopefully in answer to the many posts on “how to get various video formats onto your iPod” I have put together a summary of applications I use. I have tried a few others with varying amounts of success (some of which are free) - I have finally plumped for the software produced by Xilisoft as providing good quality video relatively affordable cost for use withPC’s and numerous MS operating systems. The link below takes you to their site which not only allows you to download trail versions of their software but also has a comprehensive set of tutorials and FAQ's for their iPod video conversion software.
I have regularly used these applications to convert various file formats to iPod friendly video. They are simple to use although frequently processor and RAM hungry:
Use Xilisoft iPod Video Converter if you want to:
[*]Convert various video file formats to MP4
[*]Convert most audio file formats to MP3
[*]Extract audio from video file and save to MP3
[*]Encode several files simultaneously
[*]Pause encoding process to run other CPU time consuming programs at any time
Supported file formats:
Video:
[*]MPEG(mpg, mpeg, dat, vob); WMV; ASF; AVI; QuichTime(mov, qt); MPEG4(mp4); 3GP; DV(dv,
dif); Real Video(rm); Animated GIF(gif - decoding only); Macromedia Flash(swf - decoding
audio only);
Audio:
[*]MPEG Audio(mp2, mp3); WMA; WAV; AU; MPEG4 Audio(m4a); Real Audio(ra); OGG; AAC; Raw
AC3(ac3); NUT Open Container Format(nut);
To convert DVD's to an iPod friendly video format:
Use Xilisoft DVD to iPod V4:
[*]Just pop the DVD in your drive select compression variables (default settings work well) and sit back!
All these products are available on a "try before you buy basis", yes there are applications for XP which are free but and may work just as well but I have converted many hours of video for my iPod without hassle using the Xilisoft products (no I don't work for them!). Check there web site HERE
MB67

Problems after flash player update with firefox

I have problems with video streaming on firefox after the flash player updated to 11.7. The video plays but the audio suddenly stops while the video continues to play but will also stop after a few seconds. Does anyone know what may cause this problem?

Hello,
Flash Player installs to the Windows directory that standard user accounts do not have access to, therefore, Admin access is required for installation.
Maria

Muse 2014 - Problems after converting a Site with Safari

Similar Messages

Maybe you are looking for