Muse CC 2014 Anchor Links do not work...
I have updated my Muse today to the CC 2014 and the anchor links I had already created on a page do not work in the 2014 version. I tried recreated new ones for the same need and they still did not work in the new version...
Based on all the posts today, there will be an update to the update. Hopefully soon.
roccocafe.businesscatalyst.com
Check my website, anchors are not working either, they do not jump to where they're supposed to.
Please help
Similar Messages
-
Adobe Edge Animate CC 2014.1 is totally not working. It stop working after 5min. Sometimes is stops the operating system. On on mac OS X Yosemite. macbook pro i7 2013.
I reinstalled it not helping.
Message was edited by: Daniel BoguszewskiUPDATE
i have ulpaded 2 animation ( one normal and one Responsive ) in 2 different server here the link
www.eclipseadv.com/maliRP/maliRP.html
Untitled
via SAFARI or CHROME on MAC all OK
but via IPAD ( SAFARI, CHROME and MERCURY) i didn't see the video, just the animation of the BUTTON and the link if i click on it (not in Mercury), like in the content viewer. -
Trying to edit Audio from Premiere Pro within Audition thru the Dynamic link but it does not fire up Audition to edit. Seems like a common problem/bug. But no one has posted a solution. Please Help
-Windows 7
-Premiere Pro CC 2014
-Adobe Audition CC 2014You dont understand it was all working fine in the previous Adobe versions. matter of fact you can go on youtube and see a couple of videos that shows the work flow between Premiere Pro and audition by way of Dynamic link. If you edit a video clip in Premier Pro and want to add some music or simply edit the audio that is contained in the video there was a time within Premiere Pro you can just right click "Edit in Adobe Audition" and Audition would open with the audio clip in place. Much in the same way Premiere Pro works with After Effects thru the Dynamic Link. The Dynamic Link is the bridge between applications to work with each other. For some reason Premiere Pro and Audition Dynamic Link is not working properly.
-
Reply link does not work on ipad
After logging in to this group, the reply link does not work on either my ipad 2 running IOS 8.1.3 nor my iphone 4 running 7.1.2. Not helpful really. I have had to switch on my old laptop.Also I never know which group to post a new question in, The names like Snow Leopard dont really give me a clue, so if the key word does not find an existing topic, i just end up guessing.
You seem to have double posted, Lynne. I have replied on the other one.
Snow Leopard is one of the Apple operating Systems (OS X) as opposed to iOS -
Dashboard link is not working from BI Publisher
Dashboard link is not working from BI Publisher. Please let me know How to fix this problem.
Please somebody guide me.
Dashboard link is working fine from the Apps Server Machine. But the link is not working from other machines. Do I need to setup machine.domain:<port_number> any where.
Thanks,
Vara -
APPLE SENT ME AN E-MAIL WITH A LINK TO RENEW MY ONE TO ONE SUPPORT. THE LINK DOES NOT WORK. AFTER I LOG INTO MY APPLE ACCOUNT AND CLICK "RENEW NOW" FOR ONE TO ONE, AN ERROR MESSAGE APPEARS SAYING "PAGE NOT FOUND". AMAZING. WHEN I TRY TO CALL THE TOLL FREE APPLE SUPPORT NUMBER FROM MILAN, ITALY WHERE I AM NOW LIVING, IT DOESN'T WORK. THE ITALIAN SUPPORT DESK APPEARS TO BE AVAILABLE ONLY ON WEEKDAYS DURING NORMAL BUSINESS HOURS. HOW CAN I REACH A LIVE APPLE SUPPORT PERSON?
Start by going here - https://expresslane.apple.com/GetproductgroupList.action?locale=it_IT
Best of luck. -
A/R Invoice linked object not working all the time
I have a LinkedButton that is set to SAPbouiCOM.BoLinkedObject.lf_Invoice. When the selected A/R Invoice has a Document Type of Service the link works. When the selected A/R Invoice has a Document Type of Items the link does not work and I get the following error:
"No matching records found 'A/R Invoice' (ODBC -2028)"
I there another property that I should be setting? I could not find anything.Hi,
I've added a code sample that works fine for me.
add this code to a simple vb project with the correct references....
1. Enter a number of the Invoice you want
2. click on the second EditText to set the linkedButton
3. click the LinkedButton
<i>Public WithEvents m_App As SAPbouiCOM.Application
Private Sub Class_Initialize()
Dim oForm As SAPbouiCOM.Form
Dim oDBDS As SAPbouiCOM.DBDataSource
Dim oItem As SAPbouiCOM.Item
Dim oLB As SAPbouiCOM.LinkedButton
Dim oST As SAPbouiCOM.StaticText
Dim oET As SAPbouiCOM.EditText
Set m_App = getCurrentApplication()
' m_App.MessageBox "You have COM UI connection"
'form
Set oForm = m_App.Forms.Add("UUID")
oForm.Height = 150
oForm.Width = 400
oForm.Top = 100
oForm.Left = 400
Set oDBDS = oForm.DataSources.DBDataSources.Add("OINV")
'Edittext
Set oItem = oForm.Items.Add("EditT", it_EDIT)
oItem.Left = 200
oItem.Width = 40
oItem.Top = 50
oItem.Height = 15
Set oET = oItem.Specific
Call oET.DataBind.SetBound(True, "OINV", "DocNum")
'static
Set oItem = oForm.Items.Add("StaticT", it_STATIC)
oItem.Left = 50
oItem.Width = 100
oItem.Top = 50
oItem.Height = 15
oItem.LinkTo = "EditT"
Set oST = oItem.Specific
oST.Caption = "Business Partner Code"
Set oItem = oForm.Items.Add("EditT2", it_EDIT)
oItem.Left = 200
oItem.Width = 40
oItem.Top = 80
oItem.Height = 15
Set oET = oItem.Specific
Call oET.DataBind.SetBound(True, "OINV", "DocNum")
Set oItem = oForm.Items.Add("StaticT2", it_STATIC)
oItem.Left = 50
oItem.Width = 100
oItem.Top = 80
oItem.Height = 15
oItem.LinkTo = "EditT2"
Set oST = oItem.Specific
oST.Caption = "Business Partner Decs"
'linked button
Set oItem = oForm.Items.Add("Linked", it_LINKED_BUTTON)
oItem.Left = 180
oItem.Top = 50
oItem.LinkTo = "EditT"
Set oLB = oItem.Specific
oLB.LinkedObject = lf_Invoice
oForm.Visible = True
End Sub</i>
Regards,
Yaniv G.
SDK Consultant,
SAP Manage Israel. -
I have updated my firefox to version 15.0. After this I have the effect that at some unspecified time during use many of the functions stop working. Menu's do not open, download links do not work anymore and so on. Opening new tab's or windows still works. Links on pages partly work partly not. Copy and paste does not work anymore on webpages. It takes ending the firefox process and restarting to correct the issue until it happens again. I have those effects on totally different webpages. At this time it happens every time after I start Firefox but not right away. Firefox first works for some time and then it suddenly doesn't anymore without me having done anything special
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us! -
Link is not working for one role. how to check please guide.
Hi Expert,
I have a simple question but as don;t aware of some of the techincal area not able to understand where to check.
I have a link under document flow in offer( opportunity) where for one role sales support user the link is not happening. I have checked for other role its working fine.I understand that for this role the link will not work as per the role maintianed.
But where this link got maintained and how i will be able to check which link is tagged to which profile.
rolewise mappeing with link.
Please guide.
Prem.Hello Prem,
Please check the navigation bar profile from your business role.
Then go to the navigation bar profile settings, you can find the details settings there.
If it is a link under some work center, you need to start from the work center.
If it is a direct link, then start from the derect link group.
Hope this could be helpful.
Best regards,
'Maggie -
I want to import bookmarks from Explorer and I go to File Tab and the IMPORT link is not working or not illuminated?
Make sure that you not run Firefox in permanent [[Private Browsing]] mode.
* You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
* To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
* Uncheck: [ ] "Permanent Private Browsing mode" -
I have a Excel file which has lots of PDFs embed as a link. When i converting to PDF the embed links are not working. Please help to slove this issue.e
I am also looking alternative way using inDesign to create the embed link as like as excel. is there any possible? Thanks for you reply
-
This link is not working. Please if you can access this l...
this link is not working. Please if you can access this link send me the text from it (as an attachement by email)
Is the SQL being passed to Access valid for Access:
SELECT Orders.*, Tickets_detail.OrderID2 AS T2, Tickets_detail.Price, Tickets_detail.ticketname FROM Orders JOIN Tickets_detail ON Orders.OrderID = Tickets_detail.OrderID2 WHERE EventID =24 AND AuthNetCode =1 AND OrderType IS NULL ORDER BY orderID2 DESC
(that's from your error msg)
Can you run that on Access?
I suspect the JOIN syntax might be different.
Any reason why you're running SQL Server on live, and Access on dev? You're making a bit of a rod for yourself there.
Adam -
In P6 P6 Help link is not working
Hi,
My P6 help link is not working in help menu.
P6 Library and Support link are working.
As suggested in another discussion i tried to update link in Admin>Application setting and restarted weblogic, But system is still taking some other link than i defined in application setting.
Can anybody help?Hi,
We worked on this issue ,
Solution:
In the P6 EPPM Admin application in the corresponding configuration, In P6 Help url we have modified the url from http://hostname:8203/p6help/help to http://hostname:8203/p6help/ and we restarted the P6 server in weblogic console.
Then everything fine now,
Regards
Kumar -
The figure links are not working
The figure links are not working in the latest ADE 4.0.3. The same ePUB figure links are worked perfectly in ADE 3.0.
Your navigation is covering some of your links. You should send the image to the back & or crop it to just the red box.
How I create navigation menus:
http://jeffnitschke.com/Video.html -
When I link to an external site, the link does not work, if I right click "Open in new tab" the link works.
I have not changed any of my preferences and they look like they are as I would have left them.
I tried resetting Firefox and deleting the preference file, no change.
By the way, I hate that the tabs are on top and not where they belong above the pages they are for. There should still be a way in Firefox to put them back without having to use an add-in.
Maybe you are looking for
-
Hello, I am using the Table Group component for displaying data in my application designed in Java Studio Creator. I have enabled paging on the component. I use CachedRowSet on the bean for the page for getting the data. This works very well at the m
-
HT2534 My Apple ID is not working.....plz help
My Apple ID is not working I made it yesterday using my PC .......plz help.......
-
Printing REPORT1 to Tray1, REPORT2 to Tray2
I am trying to automate two different reports so that one Reports Paper Source is TRAY1 and the Other Reports Paper Source is TRAY2. I have tryed using printer definition files with escape sequences, but they only seem to work when DESTYPE=file. I ne
-
Attach an xml to a pdf using ADS
Hi all, I have a scenario where we are sending a Base64 encoded PDF (a bill) and the corresponding xml data from SAP backend on level 4.6C to PI 7.1. In PI we should attach the xml data to the PDF. I have already succeeded to do this using iText but
-
Currency value in BAPI_ACC_DOCUMENT_POST
Hi All; in order to post payments i use BAPI_ACC_DOCUMENT_POST. There are many payment lines (posting key 40) and one vendor line (posting key 31). i have filled in tables header, account_gl, accounts_payable and currency-amount accordingly. When i r