Muse does not stopp asking for new version

Dear all, Muse asked for a new version.
I installed it and tried to start Muse again.
Muse still asks for new version.
Under APPs I find Muse as updated to newest version.
I also started my Mac new.
Nothing helps.
Please give me a hint. (your suggestion).
Thank you and sorry for my poor english.
Best regards,
Markus

Hi Markus,
If you did not removed the previous version, you should have two icons on your desktop. Adobe Muse and Adobe Muse CC 2014. Make sure you are clicking on Muse CC 2014, not on Adobe Muse. Better to remove older version and check it again, it should be fine.
Please let me know if you have any other query.

Similar Messages

When I try and connect to my wifi, I get a response that says "unable to connect to my wifi" and it does not even ask for my password

when I try and connect to my wifi, I get a response that says "unable to connect to my wifi" and it does not even ask for my password; thoughts?

Does the iPod connect to other networks?
Does the iPod see the network?
Do other devices now connect?
Did the iPod connect before?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

My "undo" command does not work in the new version of GB. Please advise. This is a real problem. I had no issues with GB from iLife 11.

My "undo" command does not work in the new version of GB. Please advise. This is a real problem. I had no issues with GB from iLife 11.

Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
Apple's iWork suite (Pages, Numbers, and Keynote.)
Open Office (Office 2007-like suite compatible with OS X.)
NeoOffice (similar to Open Office.)
LibreOffice (a new direction for the Open Office suite.)

Palm Treo 755p -- bought new computer with Vista and downloaded Download Palm Desktop by ACCESS 6.2 -- now the sync does not work, asks for drivers

Hello...
I am new to the Palm (~1mo.) but I was using hotsync with my old laptop which had Windows XP and was not experiencing any real problems. That computer is going bye-bye, I bought an HP with the Vista OS and I followed the directions on downloading the Download Palm Desktop by ACCESS 6.2 from the website but now I can not get my device to sync-- The Desktop computer asks for the appropriate drivers. I tried searching online, on the disk that came with the smartphone and even reinstalling a couple times and everything is dead in the water...
Anyone able to help me out on this?
Is there an additional patch of some sort to download?
Post relates to: Palm m515

Just in case it is not clear... that post was made after I bought the bluetooth adapter and tried following the advice provided in the Vista 64 Hotsync solution found! post. Again-- my statement of not working is for the following reasons:
1) my PC tells me that the sychronization completed with errors.
2) when I look at the log that the Backup sychronization aborted.
3) It almost invariably tells me that it Failed to backup 1 file(s) and that file is "NetworkProfiles2" through a "Protocol Error: Unknown error. (6410)"
4) many of my contacts (over half) duplicate during this synchronization.
5) many of my appointments (over half) duplicate during this synchronization.
The information about creating a virtual serial port on my PC comes from my actual palm itself. The palm info is in the HotSynch verbage and it tells me to contact my computer manufacturer. In doing so however they have no idea how to do this and Palm does not either. I am still working with HP on trying to resolve that part of it but I am thinking from the hours of research that Palm wants me to create another COM port but again the help I am finding on this is beyond my pay grade so to speak... you can check out the following link and try to help me if you like:
http://msdn.microsoft.com/en-us/library/ms885792.aspx
So... any ideas my friend? It appears that some Vista 64-bit users are having success with a bluetooth synch but I have tried emailing those that claim to have been able to do this with no luck. I am not having any luck (I hope my outline above is clearer)-- and no one has seemed to had any luck recently.
I would love to make this work-- I bought this phone for this functionality.
Post relates to: Palm m515
Post relates to: Palm m515

DW keeps asking for new version Adobe Flash Player

Hello There,
I try to show a Flash-10 animation in DW CS4 and I get the messageVoor het weergeven van de inhoud op deze pagina is een nieuwe versie van Adobe Flash Player vereist.
In English: for representing the content of this page you need the new version of Adobe Flash Player.
I download the new version (two times: In IE 8 and Firefox) and I still get the same message. How come?
When I try-out in Flash everything is OK and the HTML-page is also OK in every browser there is.
Can anybody help me out this mess?
Thanks in advance,
Robert

Hello Waterdad,
Thanks for your reply, but it didnot solve the problem yet. I have the following remarks to your answer:
Yes, I am running Windows, but I have no firewall active. I do use Norton, but that should not be the problem.
How is it possible that directly from Flash everything works perfectly in publishing (Flash, HTML, etc.) and when I export the file to DW and make a blank page with only the flash-item it fails. For clarity: live view is also working perfectly.
The browser effect is then that IE8 does not react at all, Safari shows a blank page and Firefox comes with the announcement of the new version as noted above. So in one way or another the browsers recognize my brand new Flash version as an older one.
When I make a video in Flash, the f4v-extension does not work either, the flv-extension works perfect. Seems to be the same problem.
I hope you can say some more about a possible solution.
Robert

LR3.2 Filmstrip does not update correctly for new imported images

Installed 3.2 last week and today I did my first import.
I downloaded from camera into a subfolder my photo folder as usually and then run synchronize on the photo folder in order for the images to appear in LR.
After that everything looks as it used to but...
However, when I scroll the filmstrip new thumbnails that enters into view does not have images, they are just grey.
If i stop scrolling they vill update and show the images.
It's however totally annoying because I can forget about scrolling to the images i want to take a look at because I don't know where they are.
I have to guess and wait for the update.
If I go back to images that I looked at before then the thumbnails are still there so once they been updated they stays so.

So far I have made no changes to import settings and today I made two new imports.
The first from card reader into my import folder.
Then I selected my import folder in LR3,2 and run synchronize and all worked fine as it allways has done before.
The second batch, captured using tethered capture onto my laptop, then transferred to an USB drive and then finally transferred to my import folder on my main computer.
Then i run syncronize again
This time I did not get the thumbnails as in my problem description.
So something differ.
Could it be that when the images was captured using tethered capture and the thumbnail was created etc on the laptop.
It also put some metadata into the raw file that makes LR3 belive that a thumbnail already has been created for the file or something like that.
Could that bee the reason to my problem?

DirectD2 is blocked in graphics and is asking for newer version, commercials will not complete on MSNBC

The commercials stop and do not complete when I watch MSNBC, when I look up the trouble solution is gives: DirectD2Enabled: then lists, Blocked on your graphics driver. Try updating your graphics driver to version 10.6 or newer.

Try this:
Start iTunes in iTunes Safe Mode:
1. hold down the Shift and Control key together and click to start iTunes.
2. when you see the iTunes icon in the task bar, click on it.
3. you will get a box that says "iTunes is running in safe mode. Visual plug-ins you have installed have been termporarily disabled." [I don't know what plug-ins I installed but you should clearly see that these so-called visual plug-ins are likely the cause of your issues];
4. click Continue to open iTunes.
Now press your sync button and everything should work fine.

Itunes does not recognize ipod after new version was intalled

Hello there,
I just downloaded and installed the new iTunes 7.1.3.1 version and when I first plugged the ipod after the instalation it said " unable to update ipod". I unplugged the ipod from computer and when I tried to play, it frozze up. Now I can't turn off , or do anything w/ it. I tried the troubleshhoting steps of Apple's web site, but no help there. Now my itunes will not recognize the ipod, nor does it update my podcasts. Any help out there???? I have WIN XP, IE 7.
Thanks a lot

Hello there,
I just downloaded and installed the new iTunes
7.1.3.1 version and when I first plugged the ipod
after the instalation it said " unable to update
ipod". I unplugged the ipod from computer and when I
tried to play, it frozze up. Now I can't turn off ,
or do anything w/ it. I tried the troubleshhoting
steps of Apple's web site, but no help there. Now my
itunes will not recognize the ipod, nor does it
update my podcasts. Any help out there???? I have WIN
XP, IE 7.
Thanks a lot
Sorry, I forgot to tell, my ipod is the 5th gen video 60GB

Keynote 6.01 is installed but won't open. Asks for newer version.

So what's up with that?

You need to install the Quicktime 7.5.5 for Leopard, not the Tiger Version.
Go to this Download Page http://support.apple.com/kb/DL27
Good Luck
Léonie

My firefox does not look like the new version, why?

I have downloaded the new Firefox but it looks like the old version. Why?

You see the orange (on Linux gray) Firefox button if the Menu Bar is hidden, so you need to hide the Menu bar via View > Toolbars, also accessible via Firefox > Options.<br />
If you need to access the hidden Menu bar then press F10 or hold down the Alt key to make the Menu Bar appear temporarily.<br />
You can place the Tab Bar on top.
* View > Toolbars : [ ] Menu Bar
* View > Toolbars : [X] Tabs on Top
*http://www.mozilla.com/firefox/features.html

Youtube does not work in the new version 13

youtube gives you an error message, this is not happening with other browsers or with your older versions

This might be caused by a recent Flash 11.3 update.
See:
*https://support.mozilla.org/kb/flash-113-doesnt-load-video-firefox

Email program not automatically checking for new email

I just figured out why I'm not getting new mail notification in the Droid email program with my Yahoo email. It seems that the email program does not automatically check for new email. I have to manually open the app and then new emails are downloaded. I have the email settings set up as "data push" checked and "fetch schedule" is at 15 minutes. Is there something else I should be doing?

this may help you...
The way you have it set up should work fine. The stock android email app (for other than gmail) does not push as soon as you get an email, it has to actually "check" your email for you and you set how often it does that. There is afairly new yahoo app in the market (go to market and search for yahoo) that supposedly pushes to your phone when you get an email. I haven't used it, but if you need your email right when you get it, it might be worth a shot.
this was found on the page before yours. anyway i had the droid in january and it had the email deletion bug. so after i lost emails, i traded to the storm 2. it sounds like the droid x is better in that area so i'm waiting for mine to be delivreed.
But as a tip if you lose youe emails randomly.
when i did i called vzw and they didnt know what was going on, but when they sent me an email i scrolled to the bottom of the list then when i scrolled up it would be gone. or gone the next day etc. so, i logged into gmail and we tried again. THEN IN REAL TIME WHILE LOOKING AT GMAIL INBOX ON LAPTOP and the droid, vzw sent another email, i scrolled to the bottom of the laptop gmail inbox and scrolled back up and it too was gone..not in trash/junk either then a second later it disappeared from the droid.
HOWEVER, I HAD OUTLOOK 2003 STUDENT TEACHER EDITION ON WIN XP SP/2 at the time and outlook WAS ABLE TO RETREIVE ALL THOSE EMAILS THAT DISAPPEARED FROM GMAIL AND THE DROID after i would manually send and receive email in outlook. that tells me that the droid email glitch is not deleting all those emails...just "cloaking" them but they are stil there on gmail but only way i could get them was via outlook once a week as i am atruck driver and i cannot get online often. thats why i went to the storm 2..till the Droid X.
As a side note, if i got an email on the storm 1 and 2 i would get it no later than 2 through 5 seconds after sender pressed send. My droid i had in january, took about 8-10 seconds average and 20-27 seconds when it was not cranky and deleting...errr cloaking my emails. also you may wany to see if your incoming yahoo mail settings are for imap vs. POP3... i hear Imap is better setting and see if yahoo has that as well
i hope Droid X is better. from what i hear,not as many email deletion bug issues here...just sync setttings and delayed email notifications.

Please i want to remove the old version of itune, the new version does not delete it for some reason , what i should do?

please i want to remove the old version of itune, the new version does not delete it for some reason , what i should do?

See https://support.mozilla.org/en-US/kb/firefox-no-longer-works-mac-os-10-4-or-powerpc
Since you have a Intel Mac, if you can upgrade to OSX 10.5.x then you may be able to use more current releases.
jscher2000, You should link to http://www.mozilla.org/en-US/firefox/all-older.html for 3.6.28 since the ftp is not mirrored.

Erased all saved passwords, rebooted, now TB does not ask for new password!

I erased all saved passwords as I've had to change the passwords on my accounts. I then rebooted and now TB does not ask for new password. I have rebooted entire computer and still no change.
Thanks!

I presume you removed the passwords via Tools > Options > Security > Passwords tab.
Do you have these settings in Account Settings:
Tools > Account Settings > Server Settings for the mail account.
* select: 'Check for new messages at start up'
* select: 'check for new messages every eg: 15 minutes'
* select : 'Automatically download new messages'
make other prefered settings and click on OK to save changes.

SOST Repeat Send does not ask for new fax number or e-mail address.

SOST Repeat Send does not ask for new fax number or e-mail address. It does work for one user but not for any others. It is supposed to ask you if you want to change the fax number or e-mail address if you were the user that sent the document. Does anyone know if there are settings that control this somewhere? Using SAP R/3 vers. 4.7

Dear Friends,
Normally, we can change the receipient address, if we send. We can not change the receipient address of another user.
Check Note 685164 - Resending with recipient change.
As per this note Go to SM30 and add parameter "SOST_REC_CHANGE" value "X" in view "SXPARAMS".
Now, if you click "repeat send" icon, it will ask below two option in dialog box:
The message is sent again. You can change the recipient before
sending. The sent message then appears as a
as a new send request in the list
Send to same recipients again
Change recipients before sending
It is working to me ....
Thanks & Regards,
Rajagopal
Chennai - INDIA.

Muse does not stopp asking for new version

Similar Messages

Maybe you are looking for