Muse form is not working on godaddy and no error message indicating a php error is occuring. Could something else be wrong? Do I have to manually set the form once loaded to go daddy to direct through their mail form system?

I have read in multiple places on the forum that muse forms are now supported on third party platforms. however I am having a very difficult time getting mine to work on Godaddy. They seem to no longer have the "form mailer" option and told me to look at this PHP: mail - Manual to make the forms work. Muse is not giving any error messages indicating that there is a problem on the go daddy end, the form appears to function but no message is received at email address. can anyone help troubleshoot this for me.
Thanks.

Hey Sanjit & Brad,
Thanks for getting back to me. So, I tried changing the address as Sanjit suggested, and yes an error message came up. But then I tested Brad's theory and looks like the form works with another email address other than that of the actual website email:( So I guess based on Brad's link I should reroute the form to the other (non-godaddy) email...or contact go-daddy to see if they can correct this? Would that be the final answer?
Thanks again!

Similar Messages

  • Home sharing not working between itunes and apple tv, I've read all help articles I could find... still nothing

    Hey there!
    Here's every detail of the problem:
    1- My iTunes (10.5.2) doesn't give me any options for apple tv in any menu. Some troubleshooting article I remember said something like «go to Settings - Apple TV - Always Search for Apple TVs» or something like that, yet my itunes settings have NOTHING for Apple TV.
    2- Following all setup instructions and usual troubleshooting solutions, i KNOW that all options and settings available to me are set correctly and everything  should work normally, yet my iTunes shows no recognition of my Apple TV AND my Apple TV «Computers» menu is nothing but a «Home Sharing is turned on, make sure that all Home Sharing devices are using the same Apple ID account» message.
    3- Of course, yes, all my devices ARE setup with the same Apple ID account, with Home Sharing turned on everywhere. Also I'm not using a Firewall, and none of my devices have any trouble connecting to my one and only router, all at once.
    So I figure the main problem is my itunes acting like Apple TV doesn't exist. Any ideas/solutions?
    Thanks in advance.

    Sharing Stopped working again over night.
    I went to Apple Support Artical TS2972
    As soon as I did this Home Sharing started working
    http://support.apple.com/kb/TS2972
    Firewall Section
    5. Check Firewall Settings
    If you have a firewall enabled in your router or computer, make sure that the firewall is not blocking communication between your computers. Home Sharing uses TCP port 3689 and UDP port 5353 to communicate with shared iTunes libraries.
    In addition, Apple TV and Mac computers will use port 123 to set the time automatically. Incorrect date and time on either the computer or Apple TV can cause errors for Home Sharing and connections in general.
    If you are unsure whether your router has a firewall or the required ports open, test additional devices or another network to help isolate the issue. If the devices tested work on another home network, it is your router or network configuration.
    For Mac OS X, you don't have to edit the port addresses, but make sure the firewall in Apple () menu > System Preferences > Security > Firewall are not set to:
    Block all incoming connections
    Allow only essential services
    If you use another security/firewall software on your computer or router, follow this article or contact the manufacturer or check the documentation on how to open TCP ports 123 and 3689 as well as UDP ports 123 and 5353.
    It made sense to me, but its still puzzling me after restarting a router would (in my first attempt) resolve the issue for a day.  This this time I applied the port forwarding TCP and UDP ports and saved the settings in the DLink DIR-655 and both my iPad2 and iPhone 3GS were now again finding the share. My ATV2 is also now accepting the Share.
    Tommorrow will be the true test.

  • How do you get the maps app to speak turn by turn directions through a car audio system?

    When using maps app in route in my car, I get a bluetooth icon at the bottom right of the screen.  When I tap on it, there is a choice to either play sound either through the iPhone or through an audio device.  If I select audio device it still plays through the iPhone, not the audio device.
    The device is connected.  My phone calls, music, and siri all work fine with it.

    Hello JaeRoc48,
    I understand that the sound is not working.
    Go to start.
    Type Sound.
    Select sound.
    Select speakers as default.
    Click OK.
    Let me know how everything goes.

  • Can I upload to FTP from Muse Trial? not working with godaddy?

    This is how it looks as a temporary site with business catalyst
    This it what i get when uploaded to godaddy ftp????

    I believe the issue resolved as on my end godaddy uploaded site works fine. This issue basically can happen due to browser issue , javascript is disabled etc or if the css folder is not uploaded properly.
    Thanks,
    Sanjit

  • You tube is not working since yesterday and playback error message is showing, is it happening to anyone else and what is the solution?

    Since yesterday all you tube videos is giving playback error message

    I know I'm replying to an out-dated post. But problems are never outdated.
    I had done all the above too. But the answer to my problem was to change the DNS server number (should have done this first when the "playback error"  persisted.:/).  Take a screenshot of your original DNS number for future necessity, then change it to OpenDNS..or google DNS...I used google DNS...for complete & thorough instructions..follow this site:--> http://www.macinstruct.com/node/558
    Edit

  • I would like to create the a swatch, add it to the library and import to the swatch panel.  The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have.  I have created a library folder, imp

    I would like to create the a swatch, add it to the library and import to the swatch panel.  The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have.  I have created a library folder, imported the colour swatch as just 4 colours as a mulib file.  I drag the four colours on to the muse page in design view but that is as far as I get.  Can anyone help?  Thanks

    I don't know since I don't share anything. You'll have to peruse the help files and check the permissions and ACLs on the Shared folder. According to the permissions on the Shared folder everyone can R&W. If you want those to be inherited by everything dropped into the folder, add an ACL for
    everyone allow read, write
    Details in the manpage for chmod. The actual steps are left as an exercise.

  • Form load rules are not working on display and edit forms

    Hi
    I have customized SharePoint 2013 list form using InfoPath 2013. I want to hide certain fields based on user group. I created rules on form load for that. These rules are working fine on New Form but are not working on display and edit form.
    What can I do?

    It could be because the value might have not changed ie, you might be checking for a particular value, the values might have got overwritten when the new form is saved, see if that value is blank or overwritten in display and edit forms.
    I would first check the form load rules and check those values again in Display form and edit form, if the values are not getting cleared/overwritten.
    It would be better if you could upload the screenprint.
    Hope this helps!
    Ram - SharePoint Architect
    Blog - SharePointDeveloper.in
    Please vote or mark your question answered, if my reply helps you

  • "Configuration error" I uninstall and reinstall Muse, but it not works.

    Hello, I have problem with Muse. I installed last update and after install I can't open Muse. I have "Configuration error" I uninstall and reinstall Muse, but it not works. Thanks

    Hi,
    What is the complete error message? Are you using Windows or Mac? Did you try to disable anti virus while installing Adobe Muse?
    Please provide some details, so we can get more idea about the problem

  • Can Someone PLEASE Tell Me Why My Muse Site Will Not Work Upon HTML Export?

    Sorry for the long title!
    I've had a few threads going regarding troubles with my Muse site. These issues have been on-going, and once I was no longer able to upload to Fetch—and had to export to html via FileZilla—it just seems the problems continue to snowball.
    I have a web site. I will disclose the URL here now: www.jamescdarling.com
    When this site was html-based (its original form), using my yahoo small business web host and Fetch, it worked like a charm. All Flash files functioned at 100%, embedded videos/players all played great, etc. Then, I switched over to Muse 1.) because I was excited by the potential, and 2.) I wanted to re-design my site, anyway.
    So, I created my site in Muse, and uploaded it all into Fetch. I soon found that some of my Flash files and videos were not working. This was the case for a long time. I finally gave up after trying everything and asking lots of questions here.
    Just recently, I set out to fix these issues as I was afraid this half-assed site would appear to make me look unprofessional and like I had no idea how to use Flash. I had some problems with the new Muse Update (had to ditch Fetch and use "export with html" using FileZlilla). Changes made to my Muse file were not taking... and each time I viewed my updated site, the updates were not there—it still looked like the previous incarnation of the site. However, with some help from some of the good folks here, I was able to make my site not only update, but work nearly perfectly—or so I thought!
    I just clicked on my personal web site URL link in my LinkedIn page, and I see the old-looking site! The bookmark I have of my site is near-perfect—only the videos still will not load. However, it would seem that my site only functions as well as it does on MY computer only—that is, URL's I have been sending out probably are of the old non-functioning site? The changes I make are not being recognized.
    If you will, click on my above URL (in bold)..... If you click on "Resume", you should see light blue rules separating each section. But I bet you will see heavier gray bars with headers inside them. Also, if you view my Flash work, go to the "Epiphone Casino Mini Site".... the "Finshes" and "Features" pages' interactive elements will not function as they should (never mind the video page!)—but they work perfectly when accessing my site from my bookmark on my computer.
    Can someone please tell me how to make my site update web-wide, and how to get my Flash files to function?
    Thanks!!!
    Message was edited by: darling67

    It seams a lot of folks are haveing issues with FTP upload. Try these areas to look at. Maybe the right answer. I dont use Flash on my sites for a long time now. Anyhow, check these out.
    http://tv.adobe.com/watch/muse-feature-tour/adobe-muse-publishing-and-managing-your-site/
    http://www.adobekb.com/using_3rdparty_ftp.html#usingftp-understandinghowftpworks

  • I look for integrated in the legend bloc of diaporama, a widget such as "Accordion" for, with a click, or passing with mouse, open a new legend for each photo. I tried with "Accordion" of Muse, it does not work. I tried copy/paste, mais no result. The wid

    Question.
    I look for integrated in the legend bloc of diaporama, a widget such as "Accordion" for, with a click, or passing with mouse, open a new legend for each photo. I tried with "Accordion" of Muse, it does not work. I tried copy/paste, mais no result. The widget disappear in bloc legend. disparaître. Have you one solution?
    Thank you,
    Loïc

    Accordion or Tabbed panel should to it, with click and open container.
    Please provide site url where this does not work, also if you can provide an example where we can see the exact action then it would help us.
    Thanks,
    Sanjit

  • 'Create' Push button is not working in BDC and LSMW while uploading G/L master data

    Hello Experts:
    I am facing the following problem:
    While uploading G/L master data with the BDC program, 'create' push button is not working  even after executing following lines.
    PERFORM BDC_DYNPRO      USING 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                   '=ACC_CRE'.
    Create G/L account  screen is not coming in BDC. Please suggest me what to do.
    Thanks !!

    Re: 'Create' Push button is not working in BDC and LSMW while uploading G/L master data
    Re: 'Create' Push button is not working in BDC and LSMW while uploading G/L master data
    Hi Glen Anthony
    Thank you for the reply Glen Anthony please take a look at the following code.
    REPORT  ZFI_BDC_FS00
            NO STANDARD PAGE HEADING LINE-SIZE 255.
    *INCLUDE BDCRECX1.
    TYPES : BEGIN OF STR,
       BUKRS TYPE GLACCOUNT_SCREEN_KEY-BUKRS,        "Company Code
       SAKNR TYPE GLACCOUNT_SCREEN_KEY-SAKNR,        "G/L Account Number
       KTOKS TYPE GLACCOUNT_SCREEN_COA-KTOKS,        "G/L Account Group
       XPLACCT TYPE GLACCOUNT_SCREEN_COA-XPLACCT,    "P&L statement account
       XBILK TYPE GLACCOUNT_SCREEN_COA-XBILK,        "Indicator: Account is a balance sheet account?
       TXT20_ML TYPE GLACCOUNT_SCREEN_COA-TXT20_ML,  "G/L account short text
       TXT50_ML TYPE GLACCOUNT_SCREEN_COA-TXT50_ML,  "G/L account short text
       WAERS TYPE GLACCOUNT_SCREEN_CCODE-WAERS,      "Account currency
       XSALH TYPE GLACCOUNT_SCREEN_CCODE-XSALH,      "Indicator: Only Manage Balances in Local Currency
       MWSKZ TYPE GLACCOUNT_SCREEN_CCODE-MWSKZ,      "Tax Category in Account Master Record
       XMWNO TYPE GLACCOUNT_SCREEN_CCODE-XMWNO,      "Indicator: Tax code is not a required field
       MITKZ TYPE GLACCOUNT_SCREEN_CCODE-MITKZ,      "Account is reconciliation account
       XOPVW TYPE GLACCOUNT_SCREEN_CCODE-XOPVW,      "Indicator: Open item management?
       XKRES TYPE GLACCOUNT_SCREEN_CCODE-XKRES,      "Indicator: Can Line Items Be Displayed by Account?
       ZUAWA TYPE GLACCOUNT_SCREEN_CCODE-ZUAWA,      "Key for sorting according to assignment numbers
       FSTAG TYPE GLACCOUNT_SCREEN_CCODE-FSTAG,      "Field status group
       XINTB TYPE GLACCOUNT_SCREEN_CCODE-XINTB,      "Indicator: Is account only posted to automatically?
       END OF STR.
    DATA : ITAB TYPE TABLE OF STR WITH HEADER LINE,
            IT_BDCDATA TYPE TABLE OF BDCDATA WITH HEADER LINE,
            TXT(4096) TYPE C OCCURS 0,
            MSG TYPE STRING,
            COUNT(5) TYPE N.
    SELECTION-SCREEN : BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
       PARAMETERS : MY_FILE TYPE RLGRAP-FILENAME.
    SELECTION-SCREEN : END OF BLOCK B1.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR MY_FILE.
    CALL FUNCTION 'F4_FILENAME'
      EXPORTING
        PROGRAM_NAME        = SYST-CPROG
        DYNPRO_NUMBER       = SYST-DYNNR
    *   FIELD_NAME          = ' '
      IMPORTING
        FILE_NAME           = MY_FILE
    CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
       EXPORTING
    *   I_FIELD_SEPERATOR          =
    *   I_LINE_HEADER              =
         I_TAB_RAW_DATA             = TXT
         I_FILENAME                 = MY_FILE
       TABLES
         I_TAB_CONVERTED_DATA       = ITAB[]
      EXCEPTIONS
        CONVERSION_FAILED          = 1
        OTHERS                     = 2
    IF SY-SUBRC <> 0.
    * IMPLEMENT SUITABLE ERROR HANDLING HERE
    ENDIF.
    START-OF-SELECTION.
    COUNT = 0.
    LOOP AT ITAB.
    *PERFORM OPEN_GROUP.
    REFRESH  IT_BDCDATA.
    PERFORM BDC_DYNPRO      USING 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                   'GLACCOUNT_SCREEN_KEY-BUKRS'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                   '=ACC_CRE'.
    *PERFORM BDC_FIELD       USING 'BDC_CURSOR'
    *                              'GLACCOUNT_SCREEN_KEY-BUKRS'.
    PERFORM BDC_FIELD       USING 'GLACCOUNT_SCREEN_KEY-SAKNR'
                                   ITAB-SAKNR. "'5'.
    PERFORM BDC_FIELD       USING 'GLACCOUNT_SCREEN_KEY-BUKRS'
                                   ITAB-BUKRS. "'TATA'.
    PERFORM BDC_DYNPRO      USING 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                   '=2102_GROUP'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                   'GLACCOUNT_SCREEN_COA-KTOKS'.
    PERFORM BDC_FIELD       USING 'GLACCOUNT_SCREEN_COA-KTOKS'
                                   ITAB-KTOKS. "'GL'.
    PERFORM BDC_FIELD       USING 'GLACCOUNT_SCREEN_COA-XPLACCT'
                                   ITAB-XPLACCT. "'X'.
    PERFORM BDC_DYNPRO      USING 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                   '=2102_BS_PL'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                   'GLACCOUNT_SCREEN_COA-XBILK'.
    PERFORM BDC_FIELD       USING 'GLACCOUNT_SCREEN_COA-KTOKS'
                                   ITAB-KTOKS. "'GL'.
    PERFORM BDC_FIELD       USING 'GLACCOUNT_SCREEN_COA-XPLACCT'
                                   ITAB-XPLACCT. "''.
    PERFORM BDC_FIELD       USING 'GLACCOUNT_SCREEN_COA-XBILK'
                                   ITAB-XBILK. "'X'.
    PERFORM BDC_DYNPRO      USING 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                   '=TAB02'.
    PERFORM BDC_FIELD       USING 'GLACCOUNT_SCREEN_COA-KTOKS'
                                   ITAB-KTOKS. "'GL'.
    PERFORM BDC_FIELD       USING 'GLACCOUNT_SCREEN_COA-XBILK'
                                   ITAB-XBILK. "'X'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                   'GLACCOUNT_SCREEN_COA-TXT50_ML'.
    PERFORM BDC_FIELD       USING 'GLACCOUNT_SCREEN_COA-TXT20_ML'
                                   ITAB-TXT20_ML. "'G/L ACCOUNT'.
    PERFORM BDC_FIELD       USING 'GLACCOUNT_SCREEN_COA-TXT50_ML'
                                   ITAB-TXT50_ML. "'G/L ACCOUNT'.
    PERFORM BDC_DYNPRO      USING 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                   '=TAB03'.
    PERFORM BDC_FIELD       USING 'GLACCOUNT_SCREEN_CCODE-WAERS'
                                   ITAB-WAERS. "'INR'.
    PERFORM BDC_FIELD       USING 'GLACCOUNT_SCREEN_CCODE-XSALH'
                                   ITAB-XSALH. "'X'.
    PERFORM BDC_FIELD       USING 'GLACCOUNT_SCREEN_CCODE-MWSKZ'
                                   ITAB-MWSKZ. "'*'.
    PERFORM BDC_FIELD       USING 'GLACCOUNT_SCREEN_CCODE-XMWNO'
                                   ITAB-XMWNO. "'X'.
    PERFORM BDC_FIELD       USING 'GLACCOUNT_SCREEN_CCODE-MITKZ'
                                   ITAB-MITKZ. "''.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                   'GLACCOUNT_SCREEN_CCODE-ZUAWA'.
    PERFORM BDC_FIELD       USING 'GLACCOUNT_SCREEN_CCODE-XOPVW'
                                   ITAB-XOPVW. "'X'.
    PERFORM BDC_FIELD       USING 'GLACCOUNT_SCREEN_CCODE-XKRES'
                                   ITAB-XKRES. "'X'.
    PERFORM BDC_FIELD       USING 'GLACCOUNT_SCREEN_CCODE-ZUAWA'
                                   ITAB-ZUAWA. "'1'.
    PERFORM BDC_DYNPRO      USING 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                   '=SAVE'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                   'GLACCOUNT_SCREEN_CCODE-XINTB'.
    PERFORM BDC_FIELD       USING 'GLACCOUNT_SCREEN_CCODE-FSTAG'
                                   ITAB-FSTAG. "'G019'.
    PERFORM BDC_FIELD       USING 'GLACCOUNT_SCREEN_CCODE-XINTB'
                                   ITAB-XINTB. "'X'.
    *PERFORM BDC_TRANSACTION USING 'FS00'.
    CALL TRANSACTION 'FS00' USING IT_BDCDATA MODE 'E' UPDATE 'S'.
    COUNT = COUNT + 1.
    *PERFORM CLOSE_GROUP.
    ENDLOOP.
    CONCATENATE COUNT ' RECORDS UPDATED SUCCESSFULLY' INTO MSG.
    MESSAGE MSG TYPE 'I'.
    FORM BDC_DYNPRO USING PROGRAM DYNPRO.
       CLEAR IT_BDCDATA.
       IT_BDCDATA-PROGRAM  = PROGRAM.
       IT_BDCDATA-DYNPRO   = DYNPRO.
       IT_BDCDATA-DYNBEGIN = 'X'.
       APPEND IT_BDCDATA.
    ENDFORM.
    *        INSERT FIELD                                                  *
    FORM BDC_FIELD USING FNAM FVAL.
    *  IF FVAL <> NODATA.
         CLEAR IT_BDCDATA.
         IT_BDCDATA-FNAM = FNAM.
         IT_BDCDATA-FVAL = FVAL.
         APPEND IT_BDCDATA.
    *  ENDIF.
    ENDFORM.

  • Polarioid pogo printer not working with ipad and iphone

    And I can not believe how that truly *****... I am traveling through the states and bought the pogo to print on the road... Only to find out that it does not work with ipad and does not work with iphone... Unless I jailbreak my phone which I don't really want to do...
    Apple wants us to go mobile and clouding and all those things, yet, when we do go mobile and try a mobile life style, we are encountering so much technical crap that we loose the will to live...
    I could have spend the hundred dollar for the pogo to have pics printed out in every kiosk in the country...
    WWhen is Apple going to come to its senses about little life savers like the pogo and bluetooth???????
    Is anyone aware of a work around so I can print on the go? And a solution that does not involve a programmers brain because my single braincell is not working while traveling... It needs to be easy!

    To cut through all the rage and anger and "knowing" who wanted what, the Pogo has been out for a year or so, well before Mr. Jobs' passing, and Apple did not make any mention of supporting printing on anything other than Airprint compatible printers.
    Since Airprint is a Wi-Fi/ethernet thing, Polaroid would have to make a significant redesign to the Pogo.  Considering that the first iPhones only supported Bluetooth headsets and Apple didn't provide any indications about increasing Bluetooth support, Polaroid's decision for the Pogo to be Bluetooth was obviously not with iOS devices in mind.  This is why initially Polaroid had links on the FAQ to tell Apple to add Bluetooth printing support (so that in effect, asking Apple to pay for the expenses to make the iPhone compatible with the Pogo, rather than Polaroid paying to make the Pogo compatible with iOS.)
    I come from a photograpic background.  I got the Pogo as soon as it came out.  I quite literally was on Polaroid's website every day checking to see when I could order it.  Having "instant" sticker prints is wonderful at family picnics with all the kids.  While it would be great to be able to get Pogo prints from anyone's iPhone, I stopped holding my breath when Apple announced Airprint, which came well after the Pogo was released.  So I took that as the sign that it was probably never going to happen.  (I knew that the Pogo wasn't iOS compatible when I bought it so not having compatiblity is not a deal-breaker for me.  But, yes, it would be nice.)
    I now use a Polaroid Z340 since it's a 14 megapixel camera that prints larger 3x4 Zink prints.  Polaroid makes the GL10, which is basically a Pogo using the same printer as the Z340.  But it's still Bluetooth only.   So while I sympathize with the desire to have a really compact portable printer like the Pogo, iOS compatibility just does not seem to be on the horizon.  IMHO, it would be more realistic that Polaroid create an app to do Bluetooth printing.  But considering Polaroid's financial issues, I'm not holding my breath

  • Commandmenu items highlight is not working in IE8 and firefox

    HI All
    i developed a menu for my project .
    in that menu i have some menuitems
    when i mouseover on commandmenuitem the item is highlighted .
    but this is not working in IE8 and firefox ..
    it is sometimes working in iE7 and some times it is not working.
    Can any one help me

    PDF documents are hosted in an ActiveX or netscape plugin control which have their own printing functions.
    Start>Adobe Reader>Edit>Preferences - to adjust what functionality the PDF document viewer addon displays (menus etc).
    Tools>Manage Addons>Show all addons
    make sure you have both the x86 and x64 versions of your PDF reader Active X control installed and enabled. I would recommend also that you update to the latest version of the vendors' (Adobe?) plugin.
    Possibly you have disabled scripting of ActiveX controls in the IE security zone that your parent page maps to. Also there is an IE security zone feature that prevents navigation to a domain in a zone of lower integrity.
    Tools>Internet Options>Security tab, click "Reset all zones to default".
    when asking developer related questions it is helpful if you can include a link to your website.
    Rob^_^

  • Cross browser testing : Modifier Keys playback actions not working in chrome and Firefox

    Hi,
    In my work flow I have to select multiple items in list.So I have recorded 'Ctrl+Click' action to select list items.In Chrome and Firefox it is not selecting multiple Items.
    Even Ctrl+A,Ctrl+C,Ctrl+V also not working in chrome and Firefox.Complete modifier keys support is not observed in chrome and Firefox.Let me Know how to automate modifier keys actions in cross browser?
    Regards,
    Nagasree.

    Hi Nagasree,
    Welcome to MSDN forums.
    First,please make sure the Chrome and Firefox is supported by cross browser testing.
    Latest version of Chrome and Firefox supported by cross browser testing are Chrome version 38.0.2125.111 and
    Firefox 33.
    I doubt whether Chrome and Firefox in cross browser testing don’t support automating modifier keys or there is anything wrong on it if you are using supported browser. Since this issue is related to the Extensions tool
    Selenium components for Coded UI Cross Browser Testing, if possible, I suggest you post this
    issue here, click “Q AND A”, and then you could post this issue there, you would get dedicated
    support there.
    Thanks for your understanding.
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Why keyboard and mouse right click not working in Solaris and Linux?

    Hi all,
    I have two problems:
    1) I am working on AWT/Swing application and its working fine in window enviornment,but while running on solaris and linux mouse right-click option window not poping up.
    2) Ctrl+c,Ctrl+v,Home and End keyboard key are not working in solaris and linux OS for same application.
    Pls provide me some solution for these problem.
    -Dinesh

    Hi Nik,
    Thanks for reply. I found some solution for the above problem.
    For mouse right click there was problem in my source code.I have not implemented the mousePressed() method
    In case of keyboard Home, End and arrow key working fine after exporting AWTUSE_TYPE4_PATCH=false; in solaris and linux
    But still Ctrl-c and Ctrl-v not working.
    I am using JDK1.5.0_07+Eclipse IDE 3.1
    -Dinesh

Maybe you are looking for