Muse form: scripture in text box disappears in the preview? What am I doing wrong?

Hello,
i did a simple form and added a view textfields. I turned off the labeling only to see the sample content in the text boxes. In Muse the letters in the text boxes are visible. In Muse preview and the preview at the browser the text is gone!? Why?
Thanks for your help.
pixelqueen

Thanks for the hint.
But this can not be the reason in my case. In this form there are text boxes in which the sample text is visible. Only in the following boxes the text disappears. But now I finally know what the dotted lines are

Similar Messages

  • Safari and chrome, text box disappears when scrolling (created in adobe muse)

    I have noticed with creating three different sites, that when you scroll, sometimes the text boxes disappear, when you scroll back up, the box reappears.
    I have changed the font to a websafe font, so that it isnt rasterised as a picture..
    If anyone has experienced similar or the same I would be so interested to hear from you.
    Thankyou all in advance,
    Squirrelnuts

    Anybody any luck. Are you guys able to replicate the issue?

  • Create a dynamic form where selected text boxes appears, based on options chosen in a drop-down box

    HELP!!! Can anyone please provide some guidance on how to create a dynamic form where selected text boxes appears, based on options chosen in a drop-down box.
    I have a form which – based on the department that's selected from a drop-down box – will have different form fields/text boxes, etc, made available.
    Is this possible in LiveCycle, if so, can you please provide the script/info - as needed.
    Thanks,

    In the preOpen event of the second dropdown list you put something like (in formCalc):
    if (dropdown1 == 1) then
    $.clearItems()
    $.setItems("Year, 2 Year,  3 Year")
    elseif (dropdown1 == 2) then
    $.clearItems()
    $.setItems("3 Year,  4 Year")
    endif

  • Can I shrink the size of a form text box based on the content?

    We are helping a customer migrate from some MS Word forms to use pdf forms.  We are screenscraping the data from an AS400 green screen system and populating these new pdf forms with data.  however some of the text boxes are in the middle of a sentence and the text box needs to be large enough to fit 50 characters but there are many times when the data we are entering is much less than 50.  The resulting document looks very strange with all of that extra white space in the middle of a sentence due to the size of the text box.
    So can we somehow shrink the size of the text box to fit the number of characters in the box?
    I considered making the box smaller and setting the font size to auto but I think that would look even more strange to have a word with smaller font in the middle of a sentence.
    Thanks,
    Trent

    Sorry, I should have mentioned I am using acrobat professional 9.  I see that I can change the size of the text field when I am designing the form but what I don't see is how to dynamically change the size of the text field based on what data is put inside it.
    Thanks,

  • Skype message / text box disappears / does not show in Mac Yosemite version

    After making a call the text box disappears. No amount of scrolling or clicking makes it appear again. I saw a reply from a Skype employee three weeks ago saying the development team is aware of it and is working on a fix. But it still keeps on happening over and over. Only way I've found to fix it (as have other community members) is to restart the program. 

    Having the same issue, it would be nice to have this fixed ASAP. 

  • How do I change the font size and color in a text box in Adobe Acrobat 9 Pro (ctrl e does not work)?

    I need to mark up scanned pdf documents with text box comments. I can insert the text box and type text but I cannot change the font or color. When I press Crtl E, no tool bar appears in the menu bar. What does appear in the menu bar is "No current selection". Please advise.

    I am already doing that: creating the text box, typing the text, selecting the text i.e. highlighting the text. This morning, for a scant minute, the properties tool bar appeared and I was able to refine the text in a text box. Then it disappeared never to be activated again this morning.
    I work half of my weekly hours at this client office and I only have this problem on their pc and adobe software (version 9 pro). When I am home, my laptop and the adobe software (version 10 pro) is fine. I can create the text boxes and refine the format at will with no issues. Could it be a software version and/or update issue? Thanks for any assistance.

  • How to compare text box value with the table data??

    Hello ALL,
    I created one stored procedure in DB,it is as follows:-
    CREATE or replace PROCEDURE chkUser
    u in varchar2,
    p in varchar2,
    ap out varchar2
    is
    begin
    select count(*) into ap from tbuser where loginid = u and password = p;
    end;
    And at the front end I have designed a form with 2 text boxes, now my question is I wanna compare these text box values(which user enters) with the data of the table....??? something like control (may be I am not sure)..... ???
    If anybody can help me out with this issue...... help will be appreciated
    Thank you.
    regards,
    Kumar

    hi Elise,
    I'm always getting the Error Message as "Invalid Creditianls"... let me tell you the whole scenario with sql synatx.
    I have created tables as:-
    CREATE TABLE "TBUSER"
    (     "LOGINID" VARCHAR2(30) NOT NULL ENABLE,
         "PASSWORD" VARCHAR2(30),
         CONSTRAINT "TBUSER_PK" PRIMARY KEY ("LOGINID") ENABLE
    than I created the Procedure on tbuser, it is as:-
    create or replace PROCEDURE logincheck
    u in varchar2,
    p in varchar2,
    ap out varchar2
    is
    begin
    select count(*) into ap from tbuser where loginid = u and password = p;
    end;
    now at the front end side I have created one form with 2 text boxes (P8_USERNAME & P8_PASSWORD) and 2 buttons (Cancel and Submit)
    as per you told me in the above post, I have created 'Validation' procedure with Type as 'Exists' and expression(into Validation Expression1)as:-
    select 1 from tbuser
    where loginid = :P8_USERNAME
    and password = :P8_PASSWORD;
    and
    kept an error message as 'Invalid credentials'.....
    but I don't know what's going wrong..... I do have few data into the table, and when I am entering the same data(with case sensitive) I am getting the Error message, rather than when the credentials are perfect user should be allowed to enter into the current page(where I have created this form and validation procedure)....
    any idea what's going worng and where...????
    thxs.... appreciated..
    regards,
    Kumar

  • I am trying to use motion tracking to have text follow a section of the background.The text box follows the motion path, but the text just sits there.  What am I doing wrong?

    I am trying to use motion tracking to have text follow a section of the background.The text box follows the motion path, but the text just sits there.  What am I doing wrong?

    Motion basically looks at the the source footage and it's timing (in the timing section of the Inspector) when analyzing for tracking.  Filters are basically ignored by the tracker.  Retiming actions, like time re-mapping, or retiming behaviors that are applied before the tracker should be used by the tracker.  Did you change the timing after doing the tracking?  If so this would also require you to re-track the shot.  Understanding that you found a workaround, describing the effects you applied would help to explain why you ran into problems.
    Cheers!

  • I just did the photoshop camera raw update and now everytime I try to do a text box or change the text the whole program crashes.

    I just did the photoshop camera raw update and now every time I try to do a text box or change the text the whole program crashes.

    All fixed!!!  My Aperture wasn't being recognized because it was in a folder.  OK, now I can use my camera with Aperture. 

  • How to retrieve the Text entered in the Text Box provided in the UWL Inbox

    Hi Experts,
    I have created a workflow with user decision task. for that task in UWL inbox i provided a text box using XML Code, but i couldnt retrieve the Text entered in the text box. I hope the text will automatically upload in the "_Attach_object" container element of the Workflow,  but it couldnt upload in that,  If anyone can help me to solve this issue.
    Thanks & Regards,

    Hi,
    <ItemType name="uwl.task.webflow.decision.TS91100000" connector="WebFlowConnector" defaultView="DefaultView">
    <ItemTypeCriteria connector="WebFlowConnector" externalType="TS91100000"/>
    <Actions>
      <Action name="accept" groupAction="yes" handler="UserDecisionHandler">
       <Properties>
        <Property name="decisionKey" value="2"/>
        <Property name="UserDecisionNote" value="true"/>
       </Properties>
      </Action>
      <Action name="reject" groupAction="yes" handler="UserDecisionHandler">
       <Properties>
        <Property name="decisionKey" value="1"/>
       </Properties>
      </Action>
    </Actions>
    </ItemType>
    I have implemented the above code and i got the Text Box,  but now the problem is i couldnt retrieve the
    text entered in the Text box.  I checked in the  attachobjects   container element related to the task and the subsequent task but the text is not appearing there.  Can you help me to get the text entered in the text box.
    Thanks & Regards,
    Manikandan.S

  • Text Box Value in the Query Bind Parameter

    Hi
    I have to use text box value in the query bind parameter
    Thanks to help...

    Hi,
    - drag Execute with params
    - use EL
    Frank

  • Help!! My linked text file disappears from the links palette

    I've set my preferences so that InDesign creates a link when placing text and spreadsheet files, and when I first place the file it appears in the Links palette just fine.
    However, as soon as I make a change in the original text file, it disappears from the Links palette!
    Any ideas what I'm doing wrong? I'm using CS2.
    Thanks very much!

    Just figured it out - Didn't notice that I wasn't setting the "Photo Credit" paragraph style. Problem solved!

  • Access report export to excel shows =sum() text boxes prefixed with the textbox name

    When exporting reports from access to excel the =sum() (group and total sums) text boxes all have the text box name prefixed to them in excel. They look good in access reports. Any way to turn this off? Why is this happening?
    I've seen the same issue on 2 computers running Access 2010. I also tried this in access 2013 and had the same issue.
    See the images below as examples, the first is from access, the second is the report exported to excel.
    Access 2010 (http://i.stack.imgur.com/4roFM.png)
    Exported report viewed in Excel 2010 (http://i.stack.imgur.com/6B1zj.png)

    I've seen the same issue on 2 computers running Access 2010. I also tried this in access 2013 and had the same issue.
    Hi Scott,
    Did you use the same database file? May I know how did you create the report and those TextBoxes?
    I couldn't reproduce your problem, this is what I did:
    Create a sample table and the corresponding report. Group it by one of the field, then give it a footer section. In the footer section I inserted a TextBox and set the ControlSource property to "=Sum([fieldname])". But the name of the TextBox didn't
    show in the exported Excel file. Check the screenshots here:
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Can you move between text boxes without using the mouse?

    Can you move between text boxes without using the mouse?  When I have mutliple text boxes as a template, and then need to move from one to the next can I do it without having to use the mouse to click the next box??

    Jon,
    Option-Tab will sequence through the tables.
    Jerry

  • When snapping a rectangle to the top of the page left space between rectangle disappears in the preview (not in the design mode)

    I think the image looks more descriptive than my words actually.. When I move the first rectangle to the top of the page the gradient background disappear in the preview (on the right side of the screen), even though I still can see that in my Design Mode (left handside). Everytime the top rectangle snaps to the top of the page the second rectangle snaps to the first one in the preview (both muse preview and browser preview)...Any help?

    Seems you have applied scroll on second rectangle with key position setup on top of the page edge as a result when page edge is reached the second rectangle scrolls up on the page.
    If this is not the case then please provide more details.
    Thanks,
    Sanjit

Maybe you are looking for