Muse hangs while exporting html

The website have nearly 49 pages loaded with lot of photos and compositions,
now when I uploaded it via muse inbuilt ftp it was fine,
Now after some changes, in contact forms I am trying to update it Muse hangs and I have to reboot the comp
I tried to export it as html but same problem.
Need to upload the site.
Please advise
Ashraf Ali

it hangs while exporting the last 49th page ......

Similar Messages

Need Help: App locking up while exporting HTML

Hi,
I just upgraded to the latest version of Muse. I made a few changes to my site and I'm trying to export the HTML. I've now tried 3 times and the app locks up at 89%. It completes all pages, but locks up there. When I look into the Muse Export folder, there is nothing there. The window reads "Finishing export" but it stays at that point for more than an hour when I finally give up and force quit.
Any ideas? Anyone else having this issue? Any ideas on how to get my HTML exported successfully?
Thanks in advance for any help!

Just an update. Previously I was attempting to export HTML to the Muse Export folder on my computer. I described what happened above.
Now, I'm trying to publish directly to my FTP site. Its doing basically the same behavior where it exports all desktop pages (189 of them) then it locks up. However, the interesting thing is that when exporting to the Muse Export folder on my computer this said it was 89% complete. When uploading to my server, it says its 59% computer when all pages have been exported.
Both options result in the app locking up and never completing the export. I did check my site online to see if the pages were really updated. I made a change to the nav bar on the master so I should see that on every page. It is not showing up online yet even though the app says all 189 pages have been exported.
Still looking for help, all advice and ideas will be appreciated! I do want to get my updates online.

Problem While exporting HTML table to Excel(.CSV) in SharePoint 2010

Hi ,
I was exporting HTML table to .CSV file.
Problem is if any field contains '>' or '<' symbol then after exporting to .CSV, it was showing like '&gt' and '&lt' and the code is as below.
//Export HTML table to CSV
function toCSV() {
var data = document.getElementById('reportstable');
var csvData = [];
var tmpArr = [];
var tmpStr = '';
for (var i = 0; i < data.rows[0].cells.length; i++)
tmpArr.push((data.rows[0].cells[i].innerText || data.rows[0].cells[i].textContent));
csvData.push(tmpArr.join('\t'));
for (var i = 1; i < data.rows.length; i++)
tmpArr = [];
for (var j = 0; j < data.rows[0].cells.length; j++)
tmpArr.push(data.rows[i].cells[j].innerHTML);
csvData.push(tmpArr.join('\t'));
var output = csvData.join('\n');
SaveContents(output);
//For saving the file
function SaveContents(element) {
if (document.execCommand) {
var oWin = window.open("about:blank","_blank");
oWin.document.write(element);
oWin.document.close();
var success = oWin.document.execCommand('SaveAs', false, "FilteredReport.xls")
oWin.close();
Thanks in Advance

Hi,
According to your post, a problem occurred when you exported the HTML table to Excel(.CSV).
The following code for your reference:
function toCSV() {
var data = document.getElementById('reportstable');
var csvData = [];
var tmpArr = [];
var tmpStr = '';
for (var i = 0; i < data.rows[0].cells.length; i++)
tmpArr.push((data.rows[0].cells[i].innerText || data.rows[0].cells[i].textContent));
csvData.push(tmpArr.join('\t'));
for (var i = 1; i < data.rows.length; i++)
tmpArr = [];
for (var j = 0; j < data.rows[0].cells.length; j++)
tmpArr.push(data.rows[i].cells[j].innerHTML);
csvData.push(tmpArr.join('\t'));
var output = csvData.join('\n');
SaveContents(output.replace(/</g, '<').replace(/>/g, '>'));
Best Regards
Dennis Guo
TechNet Community Support

Muse hangs while publishing website

I recently published my Muse site to BC. I already did this a couple of times, everything has working great.
Now, for some reason, when I hit the "publish" button and then hit "ok", it'll get to 55% and than it hangs.
Does anybody else have this problem/is there a solution?
Best,

Hi Danieke,
Could you please test if you are able to publish with a new site to business catalyst? Also check if you are able to export the html to a local folder on your computer.
Where have you saved the assets, in the local drive or a network drive?
What happens when you move your .muse file to some other folder and then try to publish?
- Abhishek Maurya

Muse error while exporting

Exporting my Muse site as HTML ends with an error and it shuts down:
SiteFile.getCRC called with no text or binary content?
Does anybody know what happened?

Hi Zak, I have the same problem with my Adobe Muse file. Same error message whenever I try to preview or publish.
Error message:
Adobe Muse CC has encountered an error and will now exit. Please report the last few actions you took leading up to this error to the Adobe Muse CC team
SiteFile.getCRC called with no text or binary content?
I have been working on the file for a while now and no issues. This error came after updating the file but only a couple of minor image & text changes.
I will email you the file. If you can help at all I would be forever grateful!
[email protected]
Thanks!

Adobe Premiere Elements 7.0 hangs while exporting and during peak file generation.

I have Adobe Premiere Elements 7.0 (PRE7). I have a project which is using a single clip from a Mini-DV that was captured with Nero 8. Nero 8 was used because it was captured prior to installing PRE7. The file is 12GB and is on a USB disk drive because I don't have the space on my main hard drive (I have about 11GB free). My project doesn't do too much that's fancy. It merely uses about 20 minutes of the 60 minute Mini-DV captured AVI, and it uses simple transitions between each scene. I also have very simple titles at start and end. No themes or anything else.
I've seen two problems. 1) While editing the project, seemingly (but I'm not positive it's related) while the peek file was being generated, PRE7 would get into a state of using about 40% to 50% CPU, and it would not let me do anything else. The other problem, 2) While using "Share" to export the video to WMA for playback on PC (about 180MB estimated file size according to Adobe), the file is exported to about the last remaining 5 seconds, but then PRE7 goes into that mode of hanging with 40% to 50% CPU usage.
One time when it had this 50% CPU issue, I let it sit overnight, and the export was finished in the morning. The export that time was to a 90MB FLV for posting to the "web" according to the Share wizard. But when I was doing the above (issue #2), it went into the 50% CPU usage but didn't finish after waiting around 2 hours. Even if I were to let it sit that time, and it were to finish, it seems like something's wrong and that this is unacceptable.
When this happens, and PRE7 goes into 50% CPU utilization, there is no pacifier or percentage bar advancing. It usually happens near 100% finished. Only one time did it complete successfully after leaving it unattended at 90% complete for an extraordinary amount of time.
To recap:
C:\ hard drive ---> PRE7, my project.
E:\ USB drive ---> 12GB source AVI file and destination for export.
I saw elsewhere on this forum that someone imported a mini-dv captured AVI into Window Movie Maker and then exported it to Mini-DV from that app. This solved that person's problem with hanging during peak file creation. I had the 50% hang issue during peak file generation but I'm not sure it was related to peak file generation. A peak file was generated in a project which, when exported with share as mentioned above, still did the hang 50% CPU issue. Regardless, I will try the import/export/movemaker thing and report back but I've been trying enough things that I wanted to take a second to ask for assistance.
Does anyone have this issue, and is there a patch or fix?
I might be able to provide a user mode dump of the 50% CPU adobe process. There is some call stack information and I'm wondering if developers would want this info if they don't already have a solution/fix to this bug.
Thanks for any help.

I have some more info on the hang which I've been experiencing during export/share of a project which uses an AVI as its one main clip. Adobe Premiere Elements 7 (PRE7) appears to be hanging because it's looping endlessly in ImporterAVI.prm. I'm wondering if this info can be passed onto Adobe developers and/or if I can submit this information elsewhere for such processing. I also have a process dump file which might be helpful, not to mention the original project files.
I used Process Monitor to help analyze this situation, and prior to PRE7 getting into the endless loop, it appears to be reading from the AVI file little by little, and WMEncodingHelper.exe is writing out little by little to the destination file, both of which I would expect. When PRE7 gets to the end of the import/export, Process Monitor appears to show all the aforementioned disk activity ceasing. I see neither process reading or writing. This would be normal if the share/export procedure had completed. But PRE7 is not complete. It is hung and is operating at 50% CPU utilization.
Far below in this post are technical details which may be helpful to an Adobe developer determine why the importer could get into this endless loop. In those details, there is a jump instruction, "jb ImporterAVI!xImportEntry+0xf32", which will always jump if a particular compare always turns out a certain way. But in my review of the counters being compared, it never will get to a point of exiting. When I modify a flag (the carry flag) to be 0, the loop exits. When I did this, my export/share of my project completed successfully. So it was done, but for some reason, PRE7 was looping and looping in its AVI importor instead of completing the export (aka "Share").
I cannot say that this certainly indicates a bug with PRE7, but it seems to me that there's enough data for Adobe to be at least investigating this particular issue. I'm not the only person who has seen this as there was at least one other message describing the same problem which the user resolved by effectively re-creating the AVI file via a no-op import/export into and out of MovieMaker. My AVI also goes through MovieMaker, import/export, without a hitch.
In a sense, I view PRE7's "share" as essentially an import, processing of imported information (i.e., effects and transitions), and an export. It's an import of all clips into the project at the right times, a processing of all effects, and finally an export to a destination. I realize this is simplistic, but the point I'm making is I have a simple project with a single AVI, and it appears that the "import" portion of PRE7's Share option is choking on the only clip used by this project. I also don't have much but simple transitions and a beginning/ending title on the project, so I'm not thinking this use of PRE7 is much more than what I'm doing with MovieMaker when importing/exporting this AVI.
I fully agree that optimum hardware can be either required or critical for certain types of video editing, but PRE7 is a consumer program and I'm not using anything extensive about it and the symptoms are that PRE7 is looping on its import of a file other programs don't have a problem with. I already tried purchasing a 1TB external, which I'm glad I did, but I really think Adobe developers should look at this issue. There may be a problem with handling certain AVI clips used in a project when those clips come from certain sources. If there is an issue, perhaps it could warrant a fix that would make PRE7 more compatible with these other clips.
Does Adobe have a procedure for people to upload (or mail) projects and files to it so that they can troubleshoot why the importer gets into this state? I also mentioned earlier that I have a full user-mode dump of the process which may be of value to a dev. Can I submit this information anywhere?
Here are textual technical details:
Plug-in which loops: C:\Program Files\Adobe\Adobe Premiere Elements 7.0\Plug-ins\en_US\ImporterAVI.prm
The following are the instructions at the "bottom" of the loop which never ends. Below, I put "***" at the jump instruction I mentioned earler. If I force the carry flag to be 0 at that point, and the jump is skipped, the export completed successfully. Additionally, notice that [esp-0x1c] is 0x2000, and that both eax and edi are 0. When I see it loop, eax stays at 0 and never reaches 0x2000. I wonder if something about the AVI is causing values used by this importer to be such that it causes this endless loop, and if that's the case, and if such values are valid/good, I'm wondering if the importer can be fixed by being able to detect such values so as to not choke (if in fact it's an importer issue).
1239dda2 50 push eax
1239dda3 ffd1 call ecx
1239dda5 8b442424 mov eax,dword ptr [esp+24h]
1239dda9 015c2428 add dword ptr [esp+28h],ebx
1239ddad 03c7 add eax,edi
1239ddaf 83c410 add esp,10h
1239ddb2 3b44241c cmp eax,dword ptr [esp+1Ch]
1239ddb6 89442414 mov dword ptr [esp+14h],eax
; *** This is where it loops around and around.
1239ddba 0f82f2feffff jb ImporterAVI!xImportEntry+0xf32 (1239dcb2)
ImporterAVI!xImportEntry+0x1040:
1239ddc0 8b542420 mov edx,dword ptr [esp+20h]
1239ddc4 52 push edx
1239ddc5 e810d40000 call ImporterAVI!xImportEntry+0xe45a (123ab1da)
1239ddca 83c404 add esp,4
ImporterAVI!xImportEntry+0x104d:
1239ddcd 5f pop edi
1239ddce 5e pop esi
1239ddcf 5d pop ebp
1239ddd0 33c0 xor eax,eax
1239ddd2 5b pop ebx
1239ddd3 83c428 add esp,28h
1239ddd6 c3 ret
ChildEBP RetAddr Args to Child
WARNING: Stack unwind information not available. Following frames may be wrong.
3195d9b8 12387545 10590f9c 27c53e00 06b35ff6 ImporterAVI!xImportEntry+0x103a
3195d9ec 1239ea10 06b35ff6 00000000 27ad8a60 ImporterAVI+0x7545
3195da1c 1238aa31 06b3554b 00000000 7fdf0000 ImporterAVI!xImportEntry+0x1c90
00000000 00000000 00000000 00000000 00000000 ImporterAVI+0xaa31
[esp-1Ch]: 3195d9a0 00002000
eax=00000000 ebx=00000000 ecx=3195dbcc edx=00000000 esi=27ad8a60 edi=00000000
eip=1239ddba esp=3195d984 ebp=3c7ba50b iopl=0 nv up ei ng nz na pe cy
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000287
ImporterAVI!xImportEntry+0x103a:
1239ddba 0f82f2feffff jb ImporterAVI!xImportEntry+0xf32 (1239dcb2) [br=1]

Indesign hang while exporting PDF

I'm trying to export a high quality PDF for my publisher. It's an Indesign book with 14 chapters. I've exported it many times before for preview. It always hangs on the same page; every time. I've tried changing the illustrations on that page from .ai to .PDF. Same thing.
Funny thing is that when I export the chapter separately, it works fine. What else could it be that is causing this book to quit exporting on the same page every time?

If you are able to export in pieces (as in the chapter exports alone), but not all together, it most likely is a system resources problem. It sometimes works to close ID and reopen, then do the export as the first operation. You can also combine individual PDFs into a single file using Acrobat.

Muse hangs while importing or placing images.

Gradually over time Muse is taking longer and longer to import. It's as if its cataloging and updating my entire computer and then it becomes responsive again. Now it hangs for about a minute when I try to import anything. I tried starting a new project and it does the same thing. I disconnected all my external dives and I get the same result.

Is it with any specific file or any file ? what happens when you create a new site and add images ?
Also the assets that are being used , are they placed locally on your computer or they are stored in any shared/external drive?
Thanks,
Sanjit

Help needed while exporting crystal reports to HTML file format using java

Help needed while exporting crystal reports to HTML file format using java api(not using crystalviewer).i want to download the
html file of the report
thanks

the ReportExportFormat class does not have HTML format, it has got to be XML. Export to HTML is available from CR Designer only.
Edited by: Aasavari Bhave on Jan 24, 2012 11:37 AM

HTML Tags escape while exporting to PDF

Hi friends,
I have two columns in my BI report like
Business Group(BG) and OU
Since in the BG column under the edit formula i used the html tags to show each and every BG column value in bold like below
'<b>' || "D1.Company"."Business Group Full Name" || '</b>'
Now the report is appearing fine in answers and dashboard but when i export the same report to PDF i can see the html tags in each and every name of the BG group.
Is there anything to be done to escape these html tags in PDF while exporting.
And also if we give the tooltip for the numeric columns like below under the column properties-->Data format-->Custom like
[html]<p title=\""Employee Count" \">#
And after that if i tried to escape the same report with the tooltip on the numeric column to pdf means, the number values are missing for the entire column in the PDF, but this case is not appearing while exporting the report to pdf if i set the tooltip to the text column, as the values is missing only for the tooltip of the numeric column. What could be the fix for this problem.
Thanks
Regards,
Saro

Hi svee,
Thanks for the reply.
For an example i tried with the bold option in the edit formula inorder to portray the html tags problem while exporting it to the pdf inspite of using the default bold option within the column properites like u said.
Suppose if i used html tags like
<br>, </br>
in the edit formula section or if i used any other html tags which is not present as a default option in bi like bold. At that time while exporting the report to pdf i can face the issue.
And also i need ur suggestion regarding with the values disappearing for the numeric column if a tooltip is used in it while exporting it to the pdf.
Regards,
Saro

Facebook, G+ and twitter only work in muse, why not when html is exported?

Below are the three codes I placed in Object/Insert HTML on my Master page, plus partial screen shots of the two results. When I previes, preview in browser and publish from Muse to a BC platform, all looks as I planned and the button function. But, when I export the HTML to upload to my host, it becomes corrupted and nothing functions. Since there is no real support (Phone support won't help if they know I'm using an outside host) there are no manuals and most of the member responses are very short on specifics for people like me who are not HTML literate. I use Muse because I was told I didn't need to know coding, but it seems not to be entirely true. PLEASE - I need to resolve this issue - and I haven't even started trying to put in 'snippets'
thanks
jm
THIS IS THE TWEETER CODE: ALL THREE WERE IN IMPORTED USING MUSE 'INSERT HTML'BOX
<div id="twitter_div"></div><a href="https://twitter.com/share" class="twitter-share-button" data-via="VehicleHound" data-count="none">Tweet</a>
<script>!function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id =id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(docu ment,"script","twitter-wjs");</script>
THIS IS THE GOOGLE G+ CODE:

<div class="g-plusone" data-size="medium" data-annotation="none"></div>

<script type="text/javascript">
(function() {
    var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true;
    po.src = 'https://apis.google.com/js/plusone.js';
    var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s);
</script>
THIS IS THE FACEBOOK CODE:
<iframe src="//www.facebook.com/plugins/like.php?href=http%3A%2F%2Fvhound.com&send=false& layout=button_count&width=200&show_faces=false&action=like&colorscheme=lig ht&font=verdana&height=21" scrolling="no" frameborder="0" style="border:none; overflow:hidden; width:200px; height:21px;" allowTransparency="true"></iframe>

I have not launched the lastest exported HML from my host's server because I cannot have it go up until I know it is going to work. The version I am basing my fears on is the site that opens in my Chrome browser once the HTML export from Muse is completed. The next step for me is to FTP if to my host. I suppose I could upload it in a different forder and then point to it and test it, but usually what I see on my browser after a Muse export is what I get when I launch it. This is the version of my site that's up now: http://vhound.com   This is the BE version that I publish to check my work before I export HTML : http://vhoundbusiness.businesscatalyst.com/index.html
Thanks for responding and I look forward to your magic.
jm

Embed an Exported Muse Page Using "Insert HTML"?

Hello All,
I'd like to export a Muse page to HTML, then embed that entire page into another Muse page using Insert HTML. I've done some experimenting and haven't yet gotten it to work.
I'm familiar with embedding html in Muse, including the linking of external css stylesheets and js libraries, and I'm also reasonably skilled in post-editing my Muse pages in Dreamweaver. But this has me stumped.
Anyone have any experience to share? Thanks!
bart

Hi Bart,
I am not sure why you want to first export the page and then embed it as HTML in another Muse page. However, you can copy all the content from a page and use the "paste in place" option from Edit menu and all the content will be placed as it is on the source page.
Regards,
Aish

How to aviod html tags from Report column heading while export to csv

Hi All,
How to aviod html tags from Report column heading while export to excel.
We used like Employee<br> Department in column heading, but the problem is the <br> tag also exporting into csv file.
If any column data 3/2009 formatt the it will exporting as marh 2009.
Please help on this.
Thanks,
Nr
Edited by: pnr on Jul 5, 2011 5:00 AM

Hi Nr
Here is how I approached this problem.
Go to report attributes tab
under column attributes check PLSQL radio button.
Create a function to return the heading of your report as shown below in your database.
create function get_heading return clob as
v_request VARCHAR2(20) := V('REQUEST');
v_col_heading CLOB;
begin
IF INSTR(v_request,'FLOW_EXCEL_OUTPUT',1) > 0 THEN
v_col_heading := 'Employee Number:Employee Name';
ELSE
v_col_heading := 'Employee breaktag Number:Employee break tag Name';
END IF;
return v_col_heading;
end;
Type the function below under ( Function returning colon delimited headings:) as follows.
return get_heading;
Similarly for data base it on PLSQL function body returning SQL and follow the same approach as headings.
Hope this helps.
Thanks
Sukarna
Edited by: user513776 on Jul 5, 2011 2:24 PM
Edited by: user513776 on Jul 5, 2011 2:27 PM

Html tags added while exporting to csv

Hi,
I am facing issue of html tags got added to some columns while exporting report to the csv format.
Can anyone help me for this .
Thanks,
Vivek

The TextArea is being included in the csv file probably because it is added to the select query. The main report query has
select apex_item.hidden(49,triagemd5_wptg||triagemd5_compare) || APEX_ITEM.CHECKBOX(34,triagemd5_wptg||triagemd5_compare) checksel, id,APEX_ITEM.SELECT_LIST(35, response, ''Will Fix;Will Fix,Will Not Fix;Will Not Fix,Not an Issue;Not an Issue'','''',''YES'','''','''') , APEX_ITEM.TEXTAREA(45,comments,0,0,''onMouseOver="title=this.value;" style="width:200px;font: 12px/16px Arial,sans-serif;height:50px; border:0 none; overflow:hidden"'')
This was implemented like this because the no. in the 1st column of the API (eg. 45 for apex_item.textarea) is needed to write the values to DB. If the textarea and formatting is added as part of report column attribute then writing comments and response to DB will fail.

Muse exported HTML

I created a muse website and exported it to my own hosting site. The site works fine but the HTML files do not seem to contain all the code necessary to make that happen. Where is the rest of the code?

Sorry for not looking further before asking the question. It is my first foray into Muse.
I'm not used to such highly organized code (I'm a bit of a hack) and I had trouble actually finding my content in the HTML files. Upon further inspection, I was able to find it. Thanks for the quick response.

Muse hangs while exporting html

Similar Messages

Maybe you are looking for