MUSE: How do you adjust scroll speed in parallax site?

My site is 1 long page.
I have put anchors in different sections to mark the places where I want to scroll to when I click on the menu
(I have removed all links to other pages on the menu and replaced the hyperlinks with the anchors).
The site works, but the menu doesn't seem to be able to keep up with the rest of the content when I'm at the bottom of the page and I'm scrolling to the top via the menu.
How do I adjust scrolling speed based on the distance between the current view and the section of the page I want to scroll to?

That's exactly what I was looking for, thanks!
Your solution also led me to finding this: http://css-tricks.com/snippets/jquery/smooth-scrolling/
So I think I'll do it that way.

Similar Messages

  • How do You Make Accurate Speed Changes To Clips?

    How do you apply a speed change to an audio clip in with frame accuracy? I have 2 audio clips, one from a camera and the other from a cheap solid-state recorder. The latter has audio drift and needs a one-off, constant adjustment to sync it with the camera audio.
    However, FCP only wants to execute clip speed changes down to 1/10th of 1%, which is not small enough. Does anyone know what to do here - either within FCP or Sountrack Pro? Thanks.

    I just know that often when capturing long segments of DV tape for our shows, we occasionally get a clip that comes in at 47.998 or 48.002, instead of the solid 48kHz.
    When I export to aiff, it seems to clear up any sync drifting we experience with the original clips.
    Might give it a go.
    STPro is a solid option as others pointed out. I simply suggested a quick fix to a possible sync/drift issue. (quicker than learning a new interface...though that's something that should be done anyway, for the tools STPro offers).
    K

  • How do you adjust CPU ratio?

    System Specs:
    Intel Core 2 Q6600 (G0)
    MSI X48 Platinum
    BIOS: v2.3 (07/07/2008)
    How do you adjust the CPU ratio in the Cell Menu? It is not greyed out, but I can't seem to change it to anything. It talks about Speed stepping technology needing to be disabled, but from what I can tell that is under the DOT Control stuff which I have disabled. Any ideas?

    Quote from: snits on 07-August-08, 05:48:43
    I just read in another thread that you need an extreme chip or an engineering sample to do this. Is this true?
    That is only if you want to apply higher MP than default one.
    Quote from: snits on 07-August-08, 05:53:23
    I will give it a shot again when I get back home. Thanks

  • How do you adjust the lenght of a transition?

    How do you adjust the length of a transitions? I'm trying to adjust a video and audio fade in and fade out at different lengths.

    Video transition durations are controlled in the 'Project Properties.'

  • How do you adjust the font size for the tabs and icons around the screen?

    How do  you adjust the font size of tabs and and icons to ake them larger?

    sfcalling
    Click on the text in the menu so that you see the bounding box around it. Look to the right of the Movie Menu customization workspace, Adjustments Palette, Text and edit your text font style and size.
    In this screenshot, "Glass Flowers" text in the main menu is selected and its Adjustments Palette Text editing opportunities are shown. To do comparable editing in the scene menu, click on the scene menu in the bin to bring its image up to the screen.
    Please let us know if you are OK with the details.
    Please also review the following Adobe document on disc menus which applies to both version 11 and 12.
    Adobe Premiere Elements 11 * Creating disc menus
    By the way, what computer operating system is your Premiere Elements 12 running on?
    Thanks.
    ATR

  • How do you adjust the duration of audio loop?

    How do you adjust the duration of the audio loop that you can setup to play in the main menu?

    Your best bet is to bring your audio into DVDSP at the length you need it. You can adjust the menu loop time in the inspector but this also adjusted your video as well. DVDSP is not an editor - only an authoring tool All adjustments need to be made outside the tool.

  • How do you adjust the brightness on a Thunderbolt Display

    How do you adjust the brightness of a Thunderbolt Display attached to an iMac ?

    I had this peculiar ‘issue’ hooking up to my MacBook Retina when my Thunderbolt Display was delivered but Applecare  - thanks Andrew - got me there. It seems daft!
    The Thunderbolt Display Brightness slider IS there – you just have to know how to make it show up.
    At initial set-up of the Thunderbolt Display [or if the Brightness slider is ever not visible in the System Preferences> Thunderbolt Display window], so long as the Thunderbolt [external] Display and the Macbook Display are ‘mirrored’ I can control the Thunderbolt [external] Display via my MacBook Retina Brightness keys [F1 & F2] – or by the Brightness slider that THEN appears in my System Preferences>Thunderbolt Display window. Once set up the Thunderbolt Display System Preferences Window continues to show the Brightness slider but I occasionally lose it if my MacBook has been disconnected from the Thunderbolt Display for some time – and I then have to start over.
    So:-
    Apple menu >
    System Preferences>
    Displays>
    Click Arrangement [at the top]
    Click Mirror Displays [at the lower left]
    That then gives me-at-least a Brightness slider on the System Preferences> Thunderbolt Display window [as well as on the Built In Retina Display window] and I can then adjust them independently.
    Oddly, having set this up just once the Brightness slider then remains on my Thurnderbolt Display and I can control it [and my MacBook Retina Display independently]. Occasionally I lose it again and have to start over.
    Hope this works for others.

  • How do you adjust the number of rings before the incoming call goes into voicemail?

    How do you adjust the number of rings on the iphone before the incoming call goes into voicemail?

    Set by your carrier, so contact them.

  • How do you adjust the timing in the animation pane to 2 minutes

    How do you adjust the timing in animation? I need 2 minutes for slide

    Since you did not mention which app you are using for animation, the only thing I can suggest is to check the apps Preferences.  That is usually the place to make changes. 

  • How do you adjust the bass in the iMac 27" (late 2012) ?

    How do you adjust the bass in the iMac 27" (late 2012)?
    I am watching Youtube and the bass is very distrubing. Isn't there a way to adjust this on an iMac OSX?

    AFAIK, you can't with the internal speakers. Contact Apple's Support, formerly Apple Express Lane, and see what they say.

  • How do you adjust settings or is this not even possible with this new program?

    I just loaded 4.1.  How can you adjust settings with this new thing or is it not even possible?  Like how can you adjust bitrate or do you have to use the templates as is?

    I'm not sure what the weird button you mention is. You mean the gear button?
    In any event, and as you've found out, the answer is yes. Create a custom setting – either by duplicating a preset, or using the plus button in the settings pane. Depending on the format, the available adjustments will be different they're accessible from the Inspector.
    Russ

  • How do I change scroll speed in mountain lion for PDF's?

    How do I change scroll speed in mountain lion for PDF's?

    How do I change scroll speed in mountain lion for PDF's?

  • How do you adjust space between rows?

    Hi guys. How do you adjust the space between rows. My table have no boarder between rows and no matter how I adjust the row height and cell margin. The generated report will still have the same amount of space between rows. Please help, thanks!

    I had the same problem - I was trying to insert a row solely for spacing purposes, and tried adjusting the size using table properties->row->and setting the row hieght is to "exactly". This didn't work for me. The row still rendered larger than I set the row size. So I tried I changing the font size of the row just using the toolbar, and when I did that and ran the report, the row actually rendered the size I wanted.

  • HT4515 How do you adjust how long the iphone rings for before going to voicemail?

    How do you adjust how long the iphone rings for before going to voicemail? Mine diverts after only a couple of rings.

    I believe you do that through your phone service provider.  I wonder if you have unheard messages in your voice mailbox.  I think some carriers use that mechanism - diversion to voicemail faster if the recipient has unheard messages.
    I do not believe you can change this directly on your iPhone.

  • How do you adjust resolution on the iPad for viewing You Tube?

    How do you adjust resolution on the iPad for viewing You Tube?

    fire up youtube app>click video>on the video theres three dots … but vertically>click on it and click the first option its a settings symbol>choose resolution

Maybe you are looking for

  • IPod won't turn on and isn't being recognized by my PC

    Hi all, hopefully someone can point me in the right direction. My iPod has worked fine. I purchased one of those iHome alarm clock players for it about 4 weeks ago. I haven't used the iPod on it's own in a while. This morning, the alarm went off just

  • Reports PDFs in Greek

    Hello. I have a problem with my reports. I'm running Oracle Application Server 10g on RedHat AS 3. My NLS_LANG is set to SPANISH_SPAIN.WE8ISO8859P15. When a report output is in XML or DATADELIMITED, I get the data OK in Spanish character set, but whe

  • Problems with sent/sending folder, not able to quit??

    I am having issues with my Mail 3.6 application recently. Basically, Mail works perfectly for a few minutes after being opened (it checks new mail, sends mail, etc). Then, after a few minutes, the "Sent" folder turns into "Sending" with that spinning

  • SPM - Spend by Buying Organization

    Hello, We have SPM 2.1 SP6 Patch 3. We have loaded data and also have hierarchies created. When we try a new report with Buing Org and Spend, then we get a report with "Unassigned" and a a total value. The report just has only one line. Even though w

  • Need help with Rollback data if there is error in Data load

    Hi All, We are trying to load data to Oracle 11g database. We want a trigger, procedure or something like that to rollback the data if there are errors in load. Is it possible to do rollback after all the records has been parsed ? So if we try to loa